! Started logfile: /image_prod/ug002_uva//J0523-2614_X_dfm.log on Wed Mar 4 20:49:30 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0523-2614_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0523-2614_X_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972741 visibilities/baseline/integration-bin. ! Found source: J0523-2614 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 39396 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0523-2614_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.046601Jy sigma=8.191631 ! Fit after self-cal, rms=0.755051Jy sigma=5.839383 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5991 mas, bmaj=1.66 mas, bpa=-6.223 degrees ! Estimated noise=0.910097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164012 Jy ! Component: 100 - total flux cleaned = 0.226309 Jy ! Total flux subtracted in 100 components = 0.226309 Jy ! Clean residual min=-0.015734 max=0.039318 Jy/beam ! Clean residual mean=-0.000010 rms=0.004091 Jy/beam ! Combined flux in latest and established models = 0.226309 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.226309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136825Jy sigma=1.052069 ! Fit after self-cal, rms=0.136768Jy sigma=1.051458 ! Inverting map ! Added new window around map position (3.6, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418317 Jy ! Component: 100 - total flux cleaned = 0.0704018 Jy ! Total flux subtracted in 100 components = 0.0704018 Jy ! Clean residual min=-0.010932 max=0.018263 Jy/beam ! Clean residual mean=-0.000004 rms=0.002932 Jy/beam ! Combined flux in latest and established models = 0.29671 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.296711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110499Jy sigma=0.836307 ! Fit after self-cal, rms=0.110229Jy sigma=0.834480 ! Inverting map ! Added new window around map position (4.4, -3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224888 Jy ! Component: 100 - total flux cleaned = 0.0402993 Jy ! Total flux subtracted in 100 components = 0.0402993 Jy ! Clean residual min=-0.009273 max=0.013962 Jy/beam ! Clean residual mean=-0.000001 rms=0.002434 Jy/beam ! Combined flux in latest and established models = 0.33701 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.33701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098822Jy sigma=0.738277 ! Fit after self-cal, rms=0.098733Jy sigma=0.737568 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.807 mas, bmaj=2.048 mas, bpa=-5.052 degrees ! Estimated noise=0.467115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348771 Jy ! Component: 100 - total flux cleaned = 0.0600808 Jy ! Component: 150 - total flux cleaned = 0.0790987 Jy ! Component: 200 - total flux cleaned = 0.0936508 Jy ! Total flux subtracted in 200 components = 0.0936508 Jy ! Clean residual min=-0.012367 max=0.019915 Jy/beam ! Clean residual mean=0.000009 rms=0.003350 Jy/beam ! Combined flux in latest and established models = 0.430661 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 66 components and 0.430661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081846Jy sigma=0.585557 ! Fit after self-cal, rms=0.081548Jy sigma=0.582790 ! Inverting map ! Added new window around map position (-1.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188119 Jy ! Component: 100 - total flux cleaned = 0.0311052 Jy ! Component: 150 - total flux cleaned = 0.0408087 Jy ! Component: 200 - total flux cleaned = 0.0486512 Jy ! Total flux subtracted in 200 components = 0.0486512 Jy ! Clean residual min=-0.011869 max=0.016809 Jy/beam ! Clean residual mean=0.000015 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 0.479312 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 100 components and 0.479312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075580Jy sigma=0.537188 ! Fit after self-cal, rms=0.075018Jy sigma=0.531924 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.807 x 2.048 at -5.052 degrees (North through East) ! Clean map min=-0.010212 max=0.24349 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.16 KP 0.99 ! LA 0.99 MK 1.01 NL 1.10 OV 0.87 ! PT 0.86 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.17 KP 0.99 ! LA 0.99 MK 1.02 NL 1.11 OV 0.88 ! PT 0.85 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.16 KP 1.01 ! LA 1.00 MK 1.03 NL 1.12 OV 0.90 ! PT 0.86 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.18 KP 0.98 ! LA 1.01 MK 1.01 NL 1.11 OV 0.89 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.16 KP 1.01 ! LA 1.01 MK 1.01 NL 1.12 OV 0.89 ! PT 0.87 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.15 KP 1.01 ! LA 1.01 MK 1.02 NL 1.12 OV 0.83 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.18 KP 0.99 ! LA 1.00 MK 1.03 NL 1.14 OV 0.89 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.18 KP 1.02 ! LA 1.01 MK 1.02 NL 1.13 OV 0.88 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.15 KP 1.00 ! LA 1.01 MK 1.04 NL 1.14 OV 0.90 ! PT 0.89 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.16 KP 0.99 ! LA 1.02 MK 1.03 NL 1.14 OV 0.90 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 1.18 KP 1.02 ! LA 1.00 MK 1.03 NL 1.11 OV 0.89 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.21 KP 1.02 ! LA 1.03 MK 1.00 NL 1.14 OV 0.92 ! PT 0.86 SC 0.96 ! ! ! Fit before self-cal, rms=0.075018Jy sigma=0.531924 ! Fit after self-cal, rms=0.070057Jy sigma=0.469784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8156 mas, bmaj=2.052 mas, bpa=-4.319 degrees ! Estimated noise=0.466851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475401 Jy ! Component: 100 - total flux cleaned = 0.00573017 Jy ! Component: 150 - total flux cleaned = 0.0064 Jy ! Component: 200 - total flux cleaned = 0.00698529 Jy ! Total flux subtracted in 200 components = 0.00698529 Jy ! Clean residual min=-0.005086 max=0.004954 Jy/beam ! Clean residual mean=0.000008 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.486297 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 123 components and 0.486297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069431Jy sigma=0.464000 ! Fit after self-cal, rms=0.069462Jy sigma=0.463424 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069462Jy sigma=0.463424 ! Fit after self-cal, rms=0.069499Jy sigma=0.455992 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=2.042 mas, bpa=-4.234 degrees ! Estimated noise=0.466853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015395 Jy ! Component: 100 - total flux cleaned = 0.00111012 Jy ! Component: 150 - total flux cleaned = 0.00192682 Jy ! Component: 200 - total flux cleaned = 0.00232678 Jy ! Total flux subtracted in 200 components = 0.00232678 Jy ! Clean residual min=-0.002988 max=0.004094 Jy/beam ! Clean residual mean=0.000008 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.488624 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 139 components and 0.488624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069233Jy sigma=0.453637 ! Fit after self-cal, rms=0.069208Jy sigma=0.453484 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328501 Jy ! Component: 100 - total flux cleaned = 0.00355744 Jy ! Component: 150 - total flux cleaned = 0.00379967 Jy ! Component: 200 - total flux cleaned = 0.00401784 Jy ! Total flux subtracted in 200 components = 0.00401784 Jy ! Clean residual min=-0.002809 max=0.003496 Jy/beam ! Clean residual mean=0.000009 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.492642 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 155 components and 0.492642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068928Jy sigma=0.451332 ! Fit after self-cal, rms=0.068896Jy sigma=0.451201 ! Inverting map ! Added new window around map position (-11, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286613 Jy ! Component: 100 - total flux cleaned = 0.00373626 Jy ! Component: 150 - total flux cleaned = 0.00398282 Jy ! Component: 200 - total flux cleaned = 0.00426892 Jy ! Total flux subtracted in 200 components = 0.00426892 Jy ! Clean residual min=-0.002534 max=0.003136 Jy/beam ! Clean residual mean=0.000008 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.496911 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 173 components and 0.496911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068716Jy sigma=0.449696 ! Fit after self-cal, rms=0.068699Jy sigma=0.449661 ! Inverting map ! Added new window around map position (0.4, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239956 Jy ! Component: 100 - total flux cleaned = 0.00267565 Jy ! Component: 150 - total flux cleaned = 0.00273305 Jy ! Component: 200 - total flux cleaned = 0.0027849 Jy ! Total flux subtracted in 200 components = 0.0027849 Jy ! Clean residual min=-0.002583 max=0.003017 Jy/beam ! Clean residual mean=0.000008 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.499696 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 190 components and 0.499695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068548Jy sigma=0.448358 ! Fit after self-cal, rms=0.068512Jy sigma=0.448206 ! Inverting map ! Added new window around map position (-4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279917 Jy ! Component: 100 - total flux cleaned = 0.0039207 Jy ! Component: 150 - total flux cleaned = 0.0044754 Jy ! Component: 200 - total flux cleaned = 0.00472147 Jy ! Total flux subtracted in 200 components = 0.00472147 Jy ! Clean residual min=-0.002399 max=0.002358 Jy/beam ! Clean residual mean=0.000008 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.504417 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 213 components and 0.504417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068358Jy sigma=0.446990 ! Fit after self-cal, rms=0.068340Jy sigma=0.446927 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068340Jy sigma=0.446927 ! Fit after self-cal, rms=0.068449Jy sigma=0.446066 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8132 mas, bmaj=2.04 mas, bpa=-4.176 degrees ! Estimated noise=0.465978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162515 Jy ! Component: 100 - total flux cleaned = 0.00239817 Jy ! Component: 150 - total flux cleaned = 0.00273504 Jy ! Component: 200 - total flux cleaned = 0.00299618 Jy ! Total flux subtracted in 200 components = 0.00299618 Jy ! Clean residual min=-0.001885 max=0.001954 Jy/beam ! Clean residual mean=0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.507413 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 223 components and 0.507413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068366Jy sigma=0.445391 ! Fit after self-cal, rms=0.068357Jy sigma=0.445349 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396739 Jy ! Component: 100 - total flux cleaned = 0.000595718 Jy ! Component: 150 - total flux cleaned = 0.000706248 Jy ! Component: 200 - total flux cleaned = 0.000777231 Jy ! Total flux subtracted in 200 components = 0.000777231 Jy ! Clean residual min=-0.001897 max=0.001870 Jy/beam ! Clean residual mean=0.000004 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.50819 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 233 components and 0.50819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068312Jy sigma=0.445021 ! Fit after self-cal, rms=0.068305Jy sigma=0.445003 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068305Jy sigma=0.445003 ! Fit after self-cal, rms=0.068408Jy sigma=0.444919 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=5.315 mas, bpa=-0.1408 degrees ! Estimated noise=0.595592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808716 Jy ! Component: 100 - total flux cleaned = 0.000810074 Jy ! Component: 150 - total flux cleaned = 0.000930728 Jy ! Component: 200 - total flux cleaned = 0.00100031 Jy ! Total flux subtracted in 200 components = 0.00100031 Jy ! Clean residual min=-0.002006 max=0.002021 Jy/beam ! Clean residual mean=0.000005 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.50919 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 247 components and 0.50919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068379Jy sigma=0.444699 ! Fit after self-cal, rms=0.068370Jy sigma=0.444649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137724 Jy ! Component: 100 - total flux cleaned = 0.00013929 Jy ! Component: 150 - total flux cleaned = 0.000201176 Jy ! Component: 200 - total flux cleaned = 0.000227697 Jy ! Total flux subtracted in 200 components = 0.000227697 Jy ! Clean residual min=-0.001954 max=0.001903 Jy/beam ! Clean residual mean=0.000005 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.509418 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 255 components and 0.509418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068354Jy sigma=0.444553 ! Fit after self-cal, rms=0.068349Jy sigma=0.444526 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.813 mas, bmaj=2.04 mas, bpa=-4.158 degrees ! Estimated noise=0.466135 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.813 x 2.04 at -4.158 degrees (North through East) ! Clean map min=-0.0028121 max=0.24147 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6005 mas, bmaj=1.641 mas, bpa=-5.23 degrees ! Estimated noise=0.920513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165767 Jy ! Component: 100 - total flux cleaned = 0.230551 Jy ! Component: 150 - total flux cleaned = 0.274217 Jy ! Component: 200 - total flux cleaned = 0.305433 Jy ! Total flux subtracted in 200 components = 0.305433 Jy ! Clean residual min=-0.008607 max=0.017873 Jy/beam ! Clean residual mean=-0.000011 rms=0.002613 Jy/beam ! Combined flux in latest and established models = 0.305433 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.305433 Jy ! Inverting map and beam ! Estimated beam: bmin=0.813 mas, bmaj=2.04 mas, bpa=-4.158 degrees ! Estimated noise=0.466135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043836 Jy ! Component: 100 - total flux cleaned = 0.075138 Jy ! Component: 150 - total flux cleaned = 0.0987115 Jy ! Component: 200 - total flux cleaned = 0.116868 Jy ! Total flux subtracted in 200 components = 0.116868 Jy ! Clean residual min=-0.006067 max=0.010757 Jy/beam ! Clean residual mean=-0.000005 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 0.422301 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 77 components and 0.422301 Jy ! Inverting map ! Added new window around map position (0.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142318 Jy ! Component: 100 - total flux cleaned = 0.0254577 Jy ! Component: 150 - total flux cleaned = 0.0345151 Jy ! Component: 200 - total flux cleaned = 0.0419601 Jy ! Total flux subtracted in 200 components = 0.0419601 Jy ! Clean residual min=-0.003240 max=0.005650 Jy/beam ! Clean residual mean=-0.000001 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.464261 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 128 components and 0.464261 Jy ! Inverting map ! Added new window around map position (-8.2, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641048 Jy ! Component: 100 - total flux cleaned = 0.0115667 Jy ! Component: 150 - total flux cleaned = 0.0159033 Jy ! Component: 200 - total flux cleaned = 0.0195939 Jy ! Total flux subtracted in 200 components = 0.0195939 Jy ! Clean residual min=-0.002196 max=0.003021 Jy/beam ! Clean residual mean=0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.483855 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 158 components and 0.483855 Jy ! Inverting map ! Added new window around map position (12, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003401 Jy ! Component: 100 - total flux cleaned = 0.0062109 Jy ! Component: 150 - total flux cleaned = 0.00868732 Jy ! Component: 200 - total flux cleaned = 0.010883 Jy ! Total flux subtracted in 200 components = 0.010883 Jy ! Clean residual min=-0.001751 max=0.001894 Jy/beam ! Clean residual mean=0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.494738 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 184 components and 0.494738 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=5.315 mas, bpa=-0.1408 degrees ! Estimated noise=0.595592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338532 Jy ! Component: 100 - total flux cleaned = 0.00594676 Jy ! Component: 150 - total flux cleaned = 0.00797035 Jy ! Component: 200 - total flux cleaned = 0.00960547 Jy ! Total flux subtracted in 200 components = 0.00960547 Jy ! Clean residual min=-0.002177 max=0.002082 Jy/beam ! Clean residual mean=0.000003 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.504343 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013427 Jy ! Component: 100 - total flux cleaned = 0.00245413 Jy ! Component: 150 - total flux cleaned = 0.003278 Jy ! Component: 200 - total flux cleaned = 0.00354402 Jy ! Total flux subtracted in 200 components = 0.00354402 Jy ! Clean residual min=-0.002047 max=0.001821 Jy/beam ! Clean residual mean=0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.507887 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 241 components and 0.507887 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.813 mas, bmaj=2.04 mas, bpa=-4.158 degrees ! Estimated noise=0.466135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107811 Jy ! Component: 100 - total flux cleaned = 6.19452e-05 Jy ! Component: 150 - total flux cleaned = 2.03956e-05 Jy ! Component: 200 - total flux cleaned = 5.77255e-05 Jy ! Total flux subtracted in 200 components = 5.77255e-05 Jy ! Clean residual min=-0.001592 max=0.001761 Jy/beam ! Clean residual mean=0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.507945 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 263 components and 0.507945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068215Jy sigma=0.443766 ! Fit after self-cal, rms=0.068160Jy sigma=0.443549 wmodel J0523-2614_X_map.mod ! Writing 263 model components to file: J0523-2614_X_map.mod wobs J0523-2614_X_uvs.fits ! Writing UV FITS file: J0523-2614_X_uvs.fits wwins J0523-2614_X_map.win ! wwins: Wrote 11 windows to J0523-2614_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115097 Jy ! Component: 100 - total flux cleaned = 0.000216352 Jy ! Component: 150 - total flux cleaned = 0.00038097 Jy ! Component: 200 - total flux cleaned = 0.000426833 Jy ! Component: 250 - total flux cleaned = 0.000470144 Jy ! Component: 300 - total flux cleaned = 0.000491165 Jy ! Component: 350 - total flux cleaned = 0.000572832 Jy ! Component: 400 - total flux cleaned = 0.000632847 Jy ! Component: 450 - total flux cleaned = 0.000767986 Jy ! Component: 500 - total flux cleaned = 0.000805333 Jy ! Component: 550 - total flux cleaned = 0.000823606 Jy ! Component: 600 - total flux cleaned = 0.000823317 Jy ! Component: 650 - total flux cleaned = 0.000805575 Jy ! Component: 700 - total flux cleaned = 0.000753567 Jy ! Component: 750 - total flux cleaned = 0.00068632 Jy ! Component: 800 - total flux cleaned = 0.000719417 Jy ! Component: 850 - total flux cleaned = 0.000686913 Jy ! Component: 900 - total flux cleaned = 0.000670827 Jy ! Component: 950 - total flux cleaned = 0.000671191 Jy ! Component: 1000 - total flux cleaned = 0.000671249 Jy ! Component: 1050 - total flux cleaned = 0.000610606 Jy ! Component: 1100 - total flux cleaned = 0.000551158 Jy ! Component: 1150 - total flux cleaned = 0.000492767 Jy ! Component: 1200 - total flux cleaned = 0.000420594 Jy ! Component: 1250 - total flux cleaned = 0.000406599 Jy ! Component: 1300 - total flux cleaned = 0.000336426 Jy ! Component: 1350 - total flux cleaned = 0.000267424 Jy ! Component: 1400 - total flux cleaned = 0.000267383 Jy ! Component: 1450 - total flux cleaned = 0.000240477 Jy ! Component: 1500 - total flux cleaned = 0.000214112 Jy ! Component: 1550 - total flux cleaned = 0.00022711 Jy ! Component: 1600 - total flux cleaned = 0.000188098 Jy ! Component: 1650 - total flux cleaned = 0.000149847 Jy ! Component: 1700 - total flux cleaned = 0.000124605 Jy ! Component: 1750 - total flux cleaned = 0.000137491 Jy ! Component: 1800 - total flux cleaned = 0.000149905 Jy ! Component: 1850 - total flux cleaned = 0.00012546 Jy ! Component: 1900 - total flux cleaned = 0.000113385 Jy ! Component: 1950 - total flux cleaned = 0.000101452 Jy ! Component: 2000 - total flux cleaned = 3.02754e-05 Jy ! Component: 2050 - total flux cleaned = 6.73388e-06 Jy ! Component: 2100 - total flux cleaned = -1.65085e-05 Jy ! Component: 2150 - total flux cleaned = -3.9607e-05 Jy ! Component: 2200 - total flux cleaned = -8.50378e-05 Jy ! Component: 2250 - total flux cleaned = -0.000118665 Jy ! Component: 2300 - total flux cleaned = -0.000152185 Jy ! Component: 2350 - total flux cleaned = -0.000174323 Jy ! Component: 2400 - total flux cleaned = -0.000174409 Jy ! Component: 2450 - total flux cleaned = -0.00018548 Jy ! Component: 2500 - total flux cleaned = -0.000217877 Jy ! Component: 2550 - total flux cleaned = -0.000217847 Jy ! Component: 2600 - total flux cleaned = -0.000218041 Jy ! Component: 2650 - total flux cleaned = -0.000259916 Jy ! Component: 2700 - total flux cleaned = -0.0002497 Jy ! Component: 2750 - total flux cleaned = -0.000301039 Jy ! Component: 2800 - total flux cleaned = -0.000290874 Jy ! Component: 2850 - total flux cleaned = -0.000311027 Jy ! Component: 2900 - total flux cleaned = -0.000330907 Jy ! Component: 2950 - total flux cleaned = -0.00029121 Jy ! Component: 3000 - total flux cleaned = -0.00033065 Jy ! Component: 3050 - total flux cleaned = -0.000252456 Jy ! Component: 3100 - total flux cleaned = -0.000281457 Jy ! Component: 3150 - total flux cleaned = -0.000252676 Jy ! Component: 3200 - total flux cleaned = -0.000224265 Jy ! Component: 3250 - total flux cleaned = -0.000243066 Jy ! Component: 3300 - total flux cleaned = -0.000168101 Jy ! Component: 3350 - total flux cleaned = -0.00017744 Jy ! Component: 3400 - total flux cleaned = -0.000103446 Jy ! Component: 3450 - total flux cleaned = -8.51431e-05 Jy ! Component: 3500 - total flux cleaned = -2.12705e-05 Jy ! Component: 3550 - total flux cleaned = 1.50511e-05 Jy ! Component: 3600 - total flux cleaned = 8.71218e-05 Jy ! Component: 3650 - total flux cleaned = 0.00012286 Jy ! Component: 3700 - total flux cleaned = 0.000149523 Jy ! Component: 3750 - total flux cleaned = 0.000184966 Jy ! Component: 3800 - total flux cleaned = 0.000255112 Jy ! Component: 3850 - total flux cleaned = 0.000316124 Jy ! Component: 3900 - total flux cleaned = 0.000368172 Jy ! Component: 3950 - total flux cleaned = 0.000411271 Jy ! Component: 4000 - total flux cleaned = 0.000479718 Jy ! Component: 4050 - total flux cleaned = 0.000505195 Jy ! Total flux subtracted in 4096 components = 0.000572712 Jy ! Clean residual min=-0.000498 max=0.000521 Jy/beam ! Clean residual mean=0.000001 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.508518 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 580 components and 0.508518 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0523-2614_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.813 x 2.04 at -4.158 degrees (North through East) ! Clean map min=-0.00093342 max=0.24264 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0523-2614_X_map.fits wmodel /image_prod/ug002_uva//J0523-2614_X_map.mod ! Writing 580 model components to file: /image_prod/ug002_uva//J0523-2614_X_map.mod wobs /image_prod/ug002_uva//J0523-2614_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0523-2614_X_uvs.fits wwins /image_prod/ug002_uva//J0523-2614_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0523-2614_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.242641 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.178894 0.178894 0.357788 0.715577 1.43115 2.86231 5.72461 11.4492 22.8985 45.7969 91.5938 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.242 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1676.97 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0523-2614_X_dfm.log closed on Wed Mar 4 20:49:36 2020