! Started logfile: /image_prod/ug002_uva//J0518+4730_X_dfm.log on Wed Mar  4 20:47:17 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0518+4730_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0518+4730_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.839815 visibilities/baseline/integration-bin.
! Found source: J0518+4730
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 21768 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0518+4730_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017414Jy  sigma=9.502030
! Fit after  self-cal, rms=0.848790Jy  sigma=7.988281
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.866 mas, bmaj=1.835 mas, bpa=-0.8969 degrees
! Estimated noise=1.12335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107143 Jy
! Component: 100  -  total flux cleaned = 0.145835 Jy
! Total flux subtracted in 100 components = 0.145835 Jy
! Clean residual min=-0.015752 max=0.057985 Jy/beam
! Clean residual mean=0.000079 rms=0.004671 Jy/beam
! Combined flux in latest and established models = 0.145835 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.145835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121518Jy  sigma=1.081631
! Fit after  self-cal, rms=0.121200Jy  sigma=1.079627
! Inverting map 
! Added new window around map position (-2.4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0494734 Jy
! Component: 100  -  total flux cleaned = 0.0747043 Jy
! Total flux subtracted in 100 components = 0.0747043 Jy
! Clean residual min=-0.010987 max=0.030592 Jy/beam
! Clean residual mean=0.000054 rms=0.003071 Jy/beam
! Combined flux in latest and established models = 0.220539 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.220539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090083Jy  sigma=0.791813
! Fit after  self-cal, rms=0.086668Jy  sigma=0.758464
! Inverting map 
! Added new window around map position (2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276193 Jy
! Component: 100  -  total flux cleaned = 0.046266 Jy
! Total flux subtracted in 100 components = 0.046266 Jy
! Clean residual min=-0.007097 max=0.015522 Jy/beam
! Clean residual mean=0.000037 rms=0.002006 Jy/beam
! Combined flux in latest and established models = 0.266805 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 34 components and 0.266805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072575Jy  sigma=0.630220
! Fit after  self-cal, rms=0.072300Jy  sigma=0.628413
! Inverting map 
! Added new window around map position (-1, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165589 Jy
! Component: 100  -  total flux cleaned = 0.0288558 Jy
! Total flux subtracted in 100 components = 0.0288558 Jy
! Clean residual min=-0.005419 max=0.009378 Jy/beam
! Clean residual mean=0.000028 rms=0.001556 Jy/beam
! Combined flux in latest and established models = 0.295661 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 42 components and 0.295661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065349Jy  sigma=0.567308
! Fit after  self-cal, rms=0.065255Jy  sigma=0.566567
! Inverting map 
! Added new window around map position (-3.4, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108677 Jy
! Component: 100  -  total flux cleaned = 0.019479 Jy
! Total flux subtracted in 100 components = 0.019479 Jy
! Clean residual min=-0.004727 max=0.005383 Jy/beam
! Clean residual mean=0.000021 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.31514 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 0.31514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061802Jy  sigma=0.537042
! Fit after  self-cal, rms=0.061770Jy  sigma=0.536812
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=2.03 mas, bpa=0.4193 degrees
! Estimated noise=0.522034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121902 Jy
! Component: 100  -  total flux cleaned = 0.0215357 Jy
! Component: 150  -  total flux cleaned = 0.0290071 Jy
! Component: 200  -  total flux cleaned = 0.0351755 Jy
! Total flux subtracted in 200 components = 0.0351755 Jy
! Clean residual min=-0.004130 max=0.004819 Jy/beam
! Clean residual mean=0.000021 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.350315 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 102 components and 0.350315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057814Jy  sigma=0.503383
! Fit after  self-cal, rms=0.057770Jy  sigma=0.502970
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.158 x 2.03 at 0.4193 degrees (North through East)
! Clean map  min=-0.0038736  max=0.1514 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.13     OV        0.92     
!   PT        0.87     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.07     NL        1.12     OV        0.91     
!   PT        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.02     KP        1.03     
!   LA        0.97     MK        1.02     NL        1.14     OV        0.91     
!   PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        1.04     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.12     OV        0.91     
!   PT        0.87     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.03     KP        1.02     
!   LA        1.00     MK        1.08     NL        1.10     OV        0.91     
!   PT        0.88     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.97     MK        1.06     NL        1.13     OV        0.92     
!   PT        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.02     KP        1.02     
!   LA        0.99     MK        1.05     NL        1.12     OV        0.93     
!   PT        0.89     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.07     NL        1.15     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.99     KP        1.02     
!   LA        1.00     MK        1.07     NL        1.09     OV        0.94     
!   PT        0.90     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.07     KP        1.03     
!   LA        0.99     MK        1.06     NL        1.15     OV        0.92     
!   PT        0.89     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.02     KP        1.05     
!   LA        1.00     MK        1.02     NL        1.13     OV        0.92     
!   PT        0.86     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.09     KP        0.97     
!   LA        1.03     MK        1.04     NL        1.14     OV        0.94     
!   PT        0.89     
! 
! 
! Fit before self-cal, rms=0.057770Jy  sigma=0.502970
! Fit after  self-cal, rms=0.054278Jy  sigma=0.474655
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.186 mas, bmaj=2.042 mas, bpa=0.7272 degrees
! Estimated noise=0.513818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362297 Jy
! Component: 100  -  total flux cleaned = 0.0052812 Jy
! Component: 150  -  total flux cleaned = 0.00637094 Jy
! Component: 200  -  total flux cleaned = 0.006893 Jy
! Total flux subtracted in 200 components = 0.006893 Jy
! Clean residual min=-0.001777 max=0.001650 Jy/beam
! Clean residual mean=-0.000000 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.357208 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 122 components and 0.357208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053993Jy  sigma=0.471341
! Fit after  self-cal, rms=0.053988Jy  sigma=0.471121
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053988Jy  sigma=0.471121
! Fit after  self-cal, rms=0.053783Jy  sigma=0.469321
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.184 mas, bmaj=2.044 mas, bpa=0.6781 degrees
! Estimated noise=0.512488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153961 Jy
! Component: 100  -  total flux cleaned = 0.00215652 Jy
! Component: 150  -  total flux cleaned = 0.00249924 Jy
! Component: 200  -  total flux cleaned = 0.00263158 Jy
! Total flux subtracted in 200 components = 0.00263158 Jy
! Clean residual min=-0.001396 max=0.001428 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.35984 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 135 components and 0.35984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053721Jy  sigma=0.468611
! Fit after  self-cal, rms=0.053720Jy  sigma=0.468575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.6, -29.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101133 Jy
! Component: 100  -  total flux cleaned = 0.00122794 Jy
! Component: 150  -  total flux cleaned = 0.00128332 Jy
! Component: 200  -  total flux cleaned = 0.00133608 Jy
! Total flux subtracted in 200 components = 0.00133608 Jy
! Clean residual min=-0.001294 max=0.001181 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.361176 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 144 components and 0.361176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053679Jy  sigma=0.468192
! Fit after  self-cal, rms=0.053677Jy  sigma=0.468171
! Inverting map 
! Added new window around map position (-4.8, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000840792 Jy
! Component: 100  -  total flux cleaned = 0.000730303 Jy
! Component: 150  -  total flux cleaned = 0.000754475 Jy
! Component: 200  -  total flux cleaned = 0.000777033 Jy
! Total flux subtracted in 200 components = 0.000777033 Jy
! Clean residual min=-0.001156 max=0.000953 Jy/beam
! Clean residual mean=-0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.361953 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 163 components and 0.361953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053645Jy  sigma=0.467872
! Fit after  self-cal, rms=0.053641Jy  sigma=0.467842
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053641Jy  sigma=0.467842
! Fit after  self-cal, rms=0.053657Jy  sigma=0.467732
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=2.045 mas, bpa=0.7465 degrees
! Estimated noise=0.512255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000648762 Jy
! Component: 100  -  total flux cleaned = 0.000798502 Jy
! Component: 150  -  total flux cleaned = 0.000819361 Jy
! Component: 200  -  total flux cleaned = 0.000876803 Jy
! Total flux subtracted in 200 components = 0.000876803 Jy
! Clean residual min=-0.001077 max=0.000895 Jy/beam
! Clean residual mean=0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.36283 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 172 components and 0.36283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053637Jy  sigma=0.467535
! Fit after  self-cal, rms=0.053638Jy  sigma=0.467516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106969 Jy
! Component: 100  -  total flux cleaned = 0.000125006 Jy
! Component: 150  -  total flux cleaned = 0.000142537 Jy
! Component: 200  -  total flux cleaned = 0.000158644 Jy
! Total flux subtracted in 200 components = 0.000158644 Jy
! Clean residual min=-0.001015 max=0.000878 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.362988 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 178 components and 0.362988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053627Jy  sigma=0.467417
! Fit after  self-cal, rms=0.053626Jy  sigma=0.467406
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053626Jy  sigma=0.467406
! Fit after  self-cal, rms=0.053652Jy  sigma=0.467382
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=2.604 mas, bpa=13.03 degrees
! Estimated noise=0.59074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137558 Jy
! Component: 100  -  total flux cleaned = 5.24063e-05 Jy
! Component: 150  -  total flux cleaned = 5.25756e-05 Jy
! Component: 200  -  total flux cleaned = 5.30985e-05 Jy
! Total flux subtracted in 200 components = 5.30985e-05 Jy
! Clean residual min=-0.000809 max=0.000937 Jy/beam
! Clean residual mean=0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.363041 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 190 components and 0.363041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053646Jy  sigma=0.467319
! Fit after  self-cal, rms=0.053645Jy  sigma=0.467314
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.45531e-05 Jy
! Component: 100  -  total flux cleaned = 2.97771e-06 Jy
! Component: 150  -  total flux cleaned = -6.42962e-06 Jy
! Component: 200  -  total flux cleaned = -1.52556e-05 Jy
! Total flux subtracted in 200 components = -1.52556e-05 Jy
! Clean residual min=-0.000825 max=0.000910 Jy/beam
! Clean residual mean=0.000001 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.363026 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 201 components and 0.363026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053642Jy  sigma=0.467282
! Fit after  self-cal, rms=0.053642Jy  sigma=0.467280
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=2.045 mas, bpa=0.7774 degrees
! Estimated noise=0.512333 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.185 x 2.045 at 0.7774 degrees (North through East)
! Clean map  min=-0.00087964  max=0.14882 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=1.846 mas, bpa=-0.6743 degrees
! Estimated noise=1.11831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111866 Jy
! Component: 100  -  total flux cleaned = 0.165768 Jy
! Component: 150  -  total flux cleaned = 0.201068 Jy
! Component: 200  -  total flux cleaned = 0.227987 Jy
! Total flux subtracted in 200 components = 0.227987 Jy
! Clean residual min=-0.008609 max=0.015790 Jy/beam
! Clean residual mean=0.000046 rms=0.002422 Jy/beam
! Combined flux in latest and established models = 0.227987 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.227987 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=2.045 mas, bpa=0.7774 degrees
! Estimated noise=0.512333 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0307836 Jy
! Component: 100  -  total flux cleaned = 0.0530086 Jy
! Component: 150  -  total flux cleaned = 0.069543 Jy
! Component: 200  -  total flux cleaned = 0.082077 Jy
! Total flux subtracted in 200 components = 0.082077 Jy
! Clean residual min=-0.003812 max=0.007490 Jy/beam
! Clean residual mean=0.000031 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.310064 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 54 components and 0.310064 Jy
! Inverting map 
! Added new window around map position (0.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00982301 Jy
! Component: 100  -  total flux cleaned = 0.0175679 Jy
! Component: 150  -  total flux cleaned = 0.0237388 Jy
! Component: 200  -  total flux cleaned = 0.0287064 Jy
! Total flux subtracted in 200 components = 0.0287064 Jy
! Clean residual min=-0.002020 max=0.002972 Jy/beam
! Clean residual mean=0.000014 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.33877 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 83 components and 0.33877 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00404402 Jy
! Component: 100  -  total flux cleaned = 0.00737477 Jy
! Component: 150  -  total flux cleaned = 0.0101579 Jy
! Component: 200  -  total flux cleaned = 0.0125011 Jy
! Total flux subtracted in 200 components = 0.0125011 Jy
! Clean residual min=-0.001428 max=0.001582 Jy/beam
! Clean residual mean=0.000007 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.351271 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 114 components and 0.351271 Jy
! Inverting map 
! Added new window around map position (-43.4, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199844 Jy
! Component: 100  -  total flux cleaned = 0.00370154 Jy
! Component: 150  -  total flux cleaned = 0.00517289 Jy
! Component: 200  -  total flux cleaned = 0.0064455 Jy
! Total flux subtracted in 200 components = 0.0064455 Jy
! Clean residual min=-0.001158 max=0.001083 Jy/beam
! Clean residual mean=0.000003 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.357716 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 131 components and 0.357716 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=2.604 mas, bpa=13.03 degrees
! Estimated noise=0.59074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163566 Jy
! Component: 100  -  total flux cleaned = 0.00278182 Jy
! Component: 150  -  total flux cleaned = 0.0035054 Jy
! Component: 200  -  total flux cleaned = 0.00405064 Jy
! Total flux subtracted in 200 components = 0.00405064 Jy
! Clean residual min=-0.000870 max=0.000885 Jy/beam
! Clean residual mean=0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.361767 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348964 Jy
! Component: 100  -  total flux cleaned = 0.00051264 Jy
! Component: 150  -  total flux cleaned = 0.00062294 Jy
! Component: 200  -  total flux cleaned = 0.000688566 Jy
! Total flux subtracted in 200 components = 0.000688566 Jy
! Clean residual min=-0.000805 max=0.000848 Jy/beam
! Clean residual mean=0.000002 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.362456 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 213 components and 0.362456 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=2.045 mas, bpa=0.7774 degrees
! Estimated noise=0.512333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203082 Jy
! Component: 100  -  total flux cleaned = 0.000290474 Jy
! Component: 150  -  total flux cleaned = 0.000369899 Jy
! Component: 200  -  total flux cleaned = 0.000426485 Jy
! Total flux subtracted in 200 components = 0.000426485 Jy
! Clean residual min=-0.000888 max=0.000961 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.362882 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 240 components and 0.362882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053632Jy  sigma=0.467243
! Fit after  self-cal, rms=0.053627Jy  sigma=0.467209
wmodel J0518+4730_X_map.mod
! Writing 240 model components to file: J0518+4730_X_map.mod
wobs   J0518+4730_X_uvs.fits
! Writing UV FITS file: J0518+4730_X_uvs.fits
wwins  J0518+4730_X_map.win
! wwins: Wrote 9 windows to J0518+4730_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174136 Jy
! Component: 100  -  total flux cleaned = 0.000174102 Jy
! Component: 150  -  total flux cleaned = 0.000129973 Jy
! Component: 200  -  total flux cleaned = 4.46564e-05 Jy
! Component: 250  -  total flux cleaned = 1.73549e-05 Jy
! Component: 300  -  total flux cleaned = -9.7968e-06 Jy
! Component: 350  -  total flux cleaned = -3.64534e-05 Jy
! Component: 400  -  total flux cleaned = -3.65445e-05 Jy
! Component: 450  -  total flux cleaned = -9.91975e-05 Jy
! Component: 500  -  total flux cleaned = -9.89384e-05 Jy
! Component: 550  -  total flux cleaned = -0.000159406 Jy
! Component: 600  -  total flux cleaned = -0.000159323 Jy
! Component: 650  -  total flux cleaned = -0.00020616 Jy
! Component: 700  -  total flux cleaned = -0.000194469 Jy
! Component: 750  -  total flux cleaned = -0.000217193 Jy
! Component: 800  -  total flux cleaned = -0.000239543 Jy
! Component: 850  -  total flux cleaned = -0.000250661 Jy
! Component: 900  -  total flux cleaned = -0.000272426 Jy
! Component: 950  -  total flux cleaned = -0.000315435 Jy
! Component: 1000  -  total flux cleaned = -0.000315387 Jy
! Component: 1050  -  total flux cleaned = -0.000389097 Jy
! Component: 1100  -  total flux cleaned = -0.000378677 Jy
! Component: 1150  -  total flux cleaned = -0.000440347 Jy
! Component: 1200  -  total flux cleaned = -0.000460664 Jy
! Component: 1250  -  total flux cleaned = -0.00050067 Jy
! Component: 1300  -  total flux cleaned = -0.000530379 Jy
! Component: 1350  -  total flux cleaned = -0.000540244 Jy
! Component: 1400  -  total flux cleaned = -0.000588675 Jy
! Component: 1450  -  total flux cleaned = -0.000607932 Jy
! Component: 1500  -  total flux cleaned = -0.000627021 Jy
! Component: 1550  -  total flux cleaned = -0.00067421 Jy
! Component: 1600  -  total flux cleaned = -0.000683558 Jy
! Component: 1650  -  total flux cleaned = -0.000748326 Jy
! Component: 1700  -  total flux cleaned = -0.000766656 Jy
! Component: 1750  -  total flux cleaned = -0.000784831 Jy
! Component: 1800  -  total flux cleaned = -0.000820776 Jy
! Component: 1850  -  total flux cleaned = -0.000811933 Jy
! Component: 1900  -  total flux cleaned = -0.000874071 Jy
! Component: 1950  -  total flux cleaned = -0.000882808 Jy
! Component: 2000  -  total flux cleaned = -0.000909005 Jy
! Component: 2050  -  total flux cleaned = -0.000917762 Jy
! Component: 2100  -  total flux cleaned = -0.000943445 Jy
! Component: 2150  -  total flux cleaned = -0.0009521 Jy
! Component: 2200  -  total flux cleaned = -0.000994301 Jy
! Component: 2250  -  total flux cleaned = -0.00101945 Jy
! Component: 2300  -  total flux cleaned = -0.00102775 Jy
! Component: 2350  -  total flux cleaned = -0.00105261 Jy
! Component: 2400  -  total flux cleaned = -0.00105258 Jy
! Component: 2450  -  total flux cleaned = -0.00107701 Jy
! Component: 2500  -  total flux cleaned = -0.00108522 Jy
! Component: 2550  -  total flux cleaned = -0.00110136 Jy
! Component: 2600  -  total flux cleaned = -0.00111726 Jy
! Component: 2650  -  total flux cleaned = -0.00112522 Jy
! Component: 2700  -  total flux cleaned = -0.00114879 Jy
! Component: 2750  -  total flux cleaned = -0.00118006 Jy
! Component: 2800  -  total flux cleaned = -0.00116448 Jy
! Component: 2850  -  total flux cleaned = -0.00119537 Jy
! Component: 2900  -  total flux cleaned = -0.00124136 Jy
! Component: 2950  -  total flux cleaned = -0.00126421 Jy
! Component: 3000  -  total flux cleaned = -0.00126418 Jy
! Component: 3050  -  total flux cleaned = -0.0012868 Jy
! Component: 3100  -  total flux cleaned = -0.00130176 Jy
! Component: 3150  -  total flux cleaned = -0.00135373 Jy
! Component: 3200  -  total flux cleaned = -0.00137594 Jy
! Component: 3250  -  total flux cleaned = -0.00139795 Jy
! Component: 3300  -  total flux cleaned = -0.00141248 Jy
! Component: 3350  -  total flux cleaned = -0.001456 Jy
! Component: 3400  -  total flux cleaned = -0.00145601 Jy
! Component: 3450  -  total flux cleaned = -0.00149182 Jy
! Component: 3500  -  total flux cleaned = -0.00151324 Jy
! Component: 3550  -  total flux cleaned = -0.00150613 Jy
! Component: 3600  -  total flux cleaned = -0.0015625 Jy
! Component: 3650  -  total flux cleaned = -0.00159753 Jy
! Component: 3700  -  total flux cleaned = -0.00163231 Jy
! Component: 3750  -  total flux cleaned = -0.00165313 Jy
! Component: 3800  -  total flux cleaned = -0.00166686 Jy
! Component: 3850  -  total flux cleaned = -0.00168746 Jy
! Component: 3900  -  total flux cleaned = -0.00167383 Jy
! Component: 3950  -  total flux cleaned = -0.00171451 Jy
! Component: 4000  -  total flux cleaned = -0.0017212 Jy
! Component: 4050  -  total flux cleaned = -0.00175481 Jy
! Total flux subtracted in 4096 components = -0.00175481 Jy
! Clean residual min=-0.000428 max=0.000530 Jy/beam
! Clean residual mean=-0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.361127 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 530 components and 0.361127 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0518+4730_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.185 x 2.045 at 0.7774 degrees (North through East)
! Clean map  min=-0.00062028  max=0.14915 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0518+4730_X_map.fits
wmodel /image_prod/ug002_uva//J0518+4730_X_map.mod
! Writing 530 model components to file: /image_prod/ug002_uva//J0518+4730_X_map.mod
wobs   /image_prod/ug002_uva//J0518+4730_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0518+4730_X_uvs.fits
wwins  /image_prod/ug002_uva//J0518+4730_X_map.win
! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0518+4730_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.149146 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114983 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.231283 0.231283 0.462565 0.925131 1.85026 3.70052 7.40104 14.8021 29.6042 59.2084
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.149 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1297.11 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0518+4730_X_dfm.log closed on Wed Mar  4 20:47:22 2020