! Started logfile: /image_prod/ug002_uva//J0512+2037_S_dfm.log on Wed Mar 4 20:43:44 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0512+2037_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0512+2037_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.993981 visibilities/baseline/integration-bin. ! Found source: J0512+2037 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6441 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0512+2037_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.011362Jy sigma=8.413360 ! Fit after self-cal, rms=0.900555Jy sigma=7.485700 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=6.229 mas, bpa=-1.893 degrees ! Estimated noise=1.5985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805215 Jy ! Component: 100 - total flux cleaned = 0.0981919 Jy ! Total flux subtracted in 100 components = 0.0981919 Jy ! Clean residual min=-0.005393 max=0.005489 Jy/beam ! Clean residual mean=-0.000003 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.0981919 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0981919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063413Jy sigma=0.476181 ! Fit after self-cal, rms=0.063394Jy sigma=0.476112 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=7.012 mas, bpa=-3.203 degrees ! Estimated noise=1.0895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452781 Jy ! Component: 100 - total flux cleaned = 0.00519726 Jy ! Component: 150 - total flux cleaned = 0.005282 Jy ! Component: 200 - total flux cleaned = 0.00548451 Jy ! Total flux subtracted in 200 components = 0.00548451 Jy ! Clean residual min=-0.003597 max=0.003618 Jy/beam ! Clean residual mean=0.000002 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.103676 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.103676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063010Jy sigma=0.472923 ! Fit after self-cal, rms=0.062990Jy sigma=0.472867 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 7.012 at -3.203 degrees (North through East) ! Clean map min=-0.0035144 max=0.10135 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.05 HN 0.99 KP 1.03 ! LA 1.04 MK 1.00 NL 1.02 OV 0.82 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 1.01 KP 1.05 ! LA 1.08 MK 1.07 NL 0.91 OV 0.87 ! SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.08 HN 1.05 KP 1.02 ! LA 1.01 MK 1.00 NL 0.91 OV 0.90 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.062990Jy sigma=0.472867 ! Fit after self-cal, rms=0.060720Jy sigma=0.463192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=6.985 mas, bpa=-2.224 degrees ! Estimated noise=1.08016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331052 Jy ! Component: 100 - total flux cleaned = 0.000176206 Jy ! Component: 150 - total flux cleaned = 9.93432e-05 Jy ! Component: 200 - total flux cleaned = 0.000117527 Jy ! Total flux subtracted in 200 components = 0.000117527 Jy ! Clean residual min=-0.002164 max=0.002107 Jy/beam ! Clean residual mean=-0.000004 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.103794 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.103794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060703Jy sigma=0.463065 ! Fit after self-cal, rms=0.060771Jy sigma=0.462820 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060771Jy sigma=0.462820 ! Fit after self-cal, rms=0.060355Jy sigma=0.460883 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=7.002 mas, bpa=-2.231 degrees ! Estimated noise=1.0803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.08574e-05 Jy ! Component: 100 - total flux cleaned = -1.15394e-05 Jy ! Component: 150 - total flux cleaned = 2.66322e-05 Jy ! Component: 200 - total flux cleaned = 6.05634e-05 Jy ! Total flux subtracted in 200 components = 6.05634e-05 Jy ! Clean residual min=-0.002069 max=0.002020 Jy/beam ! Clean residual mean=-0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.103854 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.103854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060341Jy sigma=0.460771 ! Fit after self-cal, rms=0.060346Jy sigma=0.460742 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0255e-05 Jy ! Component: 100 - total flux cleaned = 5.7808e-05 Jy ! Component: 150 - total flux cleaned = 9.65517e-05 Jy ! Component: 200 - total flux cleaned = 0.000131783 Jy ! Total flux subtracted in 200 components = 0.000131783 Jy ! Clean residual min=-0.002072 max=0.002021 Jy/beam ! Clean residual mean=-0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.103986 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.103986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060340Jy sigma=0.460703 ! Fit after self-cal, rms=0.060339Jy sigma=0.460701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060339Jy sigma=0.460701 ! Fit after self-cal, rms=0.060228Jy sigma=0.460623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.002 mas, bpa=-2.158 degrees ! Estimated noise=1.07994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200684 Jy ! Component: 100 - total flux cleaned = 0.000229383 Jy ! Component: 150 - total flux cleaned = 0.000254535 Jy ! Component: 200 - total flux cleaned = 0.00030064 Jy ! Total flux subtracted in 200 components = 0.00030064 Jy ! Clean residual min=-0.002000 max=0.001969 Jy/beam ! Clean residual mean=-0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.104287 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.104287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060222Jy sigma=0.460576 ! Fit after self-cal, rms=0.060221Jy sigma=0.460573 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18085e-05 Jy ! Component: 100 - total flux cleaned = 8.37084e-05 Jy ! Component: 150 - total flux cleaned = 0.000113107 Jy ! Component: 200 - total flux cleaned = 0.000140568 Jy ! Total flux subtracted in 200 components = 0.000140568 Jy ! Clean residual min=-0.002007 max=0.001970 Jy/beam ! Clean residual mean=-0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.104427 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.104427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060217Jy sigma=0.460551 ! Fit after self-cal, rms=0.060218Jy sigma=0.460551 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060218Jy sigma=0.460551 ! Fit after self-cal, rms=0.060183Jy sigma=0.460538 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.742 mas, bmaj=10.18 mas, bpa=-4.682 degrees ! Estimated noise=1.33978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008642 Jy ! Component: 100 - total flux cleaned = 0.00113746 Jy ! Component: 150 - total flux cleaned = 0.00120301 Jy ! Component: 200 - total flux cleaned = 0.00124877 Jy ! Total flux subtracted in 200 components = 0.00124877 Jy ! Clean residual min=-0.002224 max=0.002105 Jy/beam ! Clean residual mean=-0.000006 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.105676 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.105676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060187Jy sigma=0.460582 ! Fit after self-cal, rms=0.060183Jy sigma=0.460561 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.45705e-05 Jy ! Component: 100 - total flux cleaned = 0.000117205 Jy ! Component: 150 - total flux cleaned = 0.00013364 Jy ! Component: 200 - total flux cleaned = 0.000158571 Jy ! Total flux subtracted in 200 components = 0.000158571 Jy ! Clean residual min=-0.002234 max=0.002119 Jy/beam ! Clean residual mean=-0.000006 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.105835 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.105835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060188Jy sigma=0.460605 ! Fit after self-cal, rms=0.060188Jy sigma=0.460599 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=6.998 mas, bpa=-2.075 degrees ! Estimated noise=1.08049 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.233 x 6.998 at -2.075 degrees (North through East) ! Clean map min=-0.0019194 max=0.10023 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=6.238 mas, bpa=-0.7319 degrees ! Estimated noise=1.5692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0790388 Jy ! Component: 100 - total flux cleaned = 0.0963004 Jy ! Component: 150 - total flux cleaned = 0.101163 Jy ! Component: 200 - total flux cleaned = 0.102984 Jy ! Total flux subtracted in 200 components = 0.102984 Jy ! Clean residual min=-0.003408 max=0.003548 Jy/beam ! Clean residual mean=-0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.102984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.102984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=6.998 mas, bpa=-2.075 degrees ! Estimated noise=1.08049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150364 Jy ! Component: 100 - total flux cleaned = 0.00155153 Jy ! Component: 150 - total flux cleaned = 0.00154775 Jy ! Component: 200 - total flux cleaned = 0.00161557 Jy ! Total flux subtracted in 200 components = 0.00161557 Jy ! Clean residual min=-0.002017 max=0.001759 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.104599 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.104599 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.742 mas, bmaj=10.18 mas, bpa=-4.682 degrees ! Estimated noise=1.33978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752409 Jy ! Component: 100 - total flux cleaned = 0.000984744 Jy ! Component: 150 - total flux cleaned = 0.00117981 Jy ! Component: 200 - total flux cleaned = 0.00125001 Jy ! Total flux subtracted in 200 components = 0.00125001 Jy ! Clean residual min=-0.002042 max=0.001959 Jy/beam ! Clean residual mean=-0.000005 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.105849 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.64901e-05 Jy ! Component: 100 - total flux cleaned = 0.000161896 Jy ! Component: 150 - total flux cleaned = 0.000218684 Jy ! Component: 200 - total flux cleaned = 0.00026102 Jy ! Total flux subtracted in 200 components = 0.00026102 Jy ! Clean residual min=-0.002016 max=0.001982 Jy/beam ! Clean residual mean=-0.000005 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.10611 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 61 components and 0.10611 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=6.998 mas, bpa=-2.075 degrees ! Estimated noise=1.08049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503599 Jy ! Component: 100 - total flux cleaned = -0.000571702 Jy ! Component: 150 - total flux cleaned = -0.000612062 Jy ! Component: 200 - total flux cleaned = -0.000610953 Jy ! Total flux subtracted in 200 components = -0.000610953 Jy ! Clean residual min=-0.001998 max=0.001678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.105499 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.105499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060119Jy sigma=0.460079 ! Fit after self-cal, rms=0.060111Jy sigma=0.460009 wmodel J0512+2037_S_map.mod ! Writing 73 model components to file: J0512+2037_S_map.mod wobs J0512+2037_S_uvs.fits ! Writing UV FITS file: J0512+2037_S_uvs.fits wwins J0512+2037_S_map.win ! wwins: Wrote 2 windows to J0512+2037_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729978 Jy ! Component: 100 - total flux cleaned = -0.000890745 Jy ! Component: 150 - total flux cleaned = -0.00113067 Jy ! Component: 200 - total flux cleaned = -0.00124602 Jy ! Component: 250 - total flux cleaned = -0.00133072 Jy ! Component: 300 - total flux cleaned = -0.00127686 Jy ! Component: 350 - total flux cleaned = -0.0012512 Jy ! Component: 400 - total flux cleaned = -0.00120042 Jy ! Component: 450 - total flux cleaned = -0.00119993 Jy ! Component: 500 - total flux cleaned = -0.00107629 Jy ! Component: 550 - total flux cleaned = -0.00100423 Jy ! Component: 600 - total flux cleaned = -0.00100409 Jy ! Component: 650 - total flux cleaned = -0.000934834 Jy ! Component: 700 - total flux cleaned = -0.000957511 Jy ! Component: 750 - total flux cleaned = -0.00100192 Jy ! Component: 800 - total flux cleaned = -0.000915027 Jy ! Component: 850 - total flux cleaned = -0.000979928 Jy ! Component: 900 - total flux cleaned = -0.000917518 Jy ! Component: 950 - total flux cleaned = -0.00102132 Jy ! Component: 1000 - total flux cleaned = -0.00104108 Jy ! Component: 1050 - total flux cleaned = -0.000900866 Jy ! Component: 1100 - total flux cleaned = -0.000900959 Jy ! Component: 1150 - total flux cleaned = -0.000842704 Jy ! Component: 1200 - total flux cleaned = -0.000823137 Jy ! Component: 1250 - total flux cleaned = -0.000747448 Jy ! Component: 1300 - total flux cleaned = -0.000765886 Jy ! Component: 1350 - total flux cleaned = -0.000766044 Jy ! Component: 1400 - total flux cleaned = -0.000693362 Jy ! Component: 1450 - total flux cleaned = -0.000711357 Jy ! Component: 1500 - total flux cleaned = -0.000640291 Jy ! Component: 1550 - total flux cleaned = -0.000640092 Jy ! Component: 1600 - total flux cleaned = -0.000570771 Jy ! Component: 1650 - total flux cleaned = -0.000502637 Jy ! Component: 1700 - total flux cleaned = -0.000502566 Jy ! Component: 1750 - total flux cleaned = -0.000418732 Jy ! Component: 1800 - total flux cleaned = -0.00036894 Jy ! Component: 1850 - total flux cleaned = -0.000352271 Jy ! Component: 1900 - total flux cleaned = -0.000287208 Jy ! Component: 1950 - total flux cleaned = -0.000190895 Jy ! Component: 2000 - total flux cleaned = -0.000175061 Jy ! Component: 2050 - total flux cleaned = -0.000127778 Jy ! Component: 2100 - total flux cleaned = -9.63877e-05 Jy ! Component: 2150 - total flux cleaned = -9.6298e-05 Jy ! Component: 2200 - total flux cleaned = -8.10996e-05 Jy ! Component: 2250 - total flux cleaned = -2.03422e-05 Jy ! Component: 2300 - total flux cleaned = -2.01752e-05 Jy ! Component: 2350 - total flux cleaned = 3.94717e-05 Jy ! Component: 2400 - total flux cleaned = 6.88843e-05 Jy ! Component: 2450 - total flux cleaned = 5.40115e-05 Jy ! Component: 2500 - total flux cleaned = 9.75035e-05 Jy ! Component: 2550 - total flux cleaned = 0.000126304 Jy ! Component: 2600 - total flux cleaned = 0.000197566 Jy ! Component: 2650 - total flux cleaned = 0.000197538 Jy ! Component: 2700 - total flux cleaned = 0.00022569 Jy ! Component: 2750 - total flux cleaned = 0.000281104 Jy ! Component: 2800 - total flux cleaned = 0.00032254 Jy ! Component: 2850 - total flux cleaned = 0.000281522 Jy ! Component: 2900 - total flux cleaned = 0.000376436 Jy ! Component: 2950 - total flux cleaned = 0.00036296 Jy ! Component: 3000 - total flux cleaned = 0.000363083 Jy ! Component: 3050 - total flux cleaned = 0.000429315 Jy ! Component: 3100 - total flux cleaned = 0.000455588 Jy ! Component: 3150 - total flux cleaned = 0.000481603 Jy ! Component: 3200 - total flux cleaned = 0.000468662 Jy ! Component: 3250 - total flux cleaned = 0.000468684 Jy ! Component: 3300 - total flux cleaned = 0.000494082 Jy ! Component: 3350 - total flux cleaned = 0.000531744 Jy ! Component: 3400 - total flux cleaned = 0.000494289 Jy ! Component: 3450 - total flux cleaned = 0.000531454 Jy ! Component: 3500 - total flux cleaned = 0.000519143 Jy ! Component: 3550 - total flux cleaned = 0.000531367 Jy ! Component: 3600 - total flux cleaned = 0.000543469 Jy ! Component: 3650 - total flux cleaned = 0.000507245 Jy ! Component: 3700 - total flux cleaned = 0.000543156 Jy ! Component: 3750 - total flux cleaned = 0.000543085 Jy ! Component: 3800 - total flux cleaned = 0.000507657 Jy ! Component: 3850 - total flux cleaned = 0.000495825 Jy ! Component: 3900 - total flux cleaned = 0.000519233 Jy ! Component: 3950 - total flux cleaned = 0.000496188 Jy ! Component: 4000 - total flux cleaned = 0.000507702 Jy ! Component: 4050 - total flux cleaned = 0.000507613 Jy ! Total flux subtracted in 4096 components = 0.000507654 Jy ! Clean residual min=-0.000793 max=0.000702 Jy/beam ! Clean residual mean=-0.000000 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.106007 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 364 components and 0.106007 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0512+2037_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.233 x 6.998 at -2.075 degrees (North through East) ! Clean map min=-0.0013639 max=0.1004 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0512+2037_S_map.fits wmodel /image_prod/ug002_uva//J0512+2037_S_map.mod ! Writing 364 model components to file: /image_prod/ug002_uva//J0512+2037_S_map.mod wobs /image_prod/ug002_uva//J0512+2037_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0512+2037_S_uvs.fits wwins /image_prod/ug002_uva//J0512+2037_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0512+2037_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.100402 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000199309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.595531 0.595531 1.19106 2.38213 4.76425 9.5285 19.057 38.114 76.228 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.1 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 503.751 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0512+2037_S_dfm.log closed on Wed Mar 4 20:43:48 2020