! Started logfile: /image_prod/ug002_uva//J0509+3951_S_b_dfm.log on Wed Mar 4 20:42:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0509+3951_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0509+3951_S_b_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.846759 visibilities/baseline/integration-bin. ! Found source: J0509+3951 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5487 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0509+3951_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011915Jy sigma=8.664935 ! Fit after self-cal, rms=0.865755Jy sigma=7.573110 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=7.969 mas, bpa=10.87 degrees ! Estimated noise=1.72362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0982712 Jy ! Component: 100 - total flux cleaned = 0.127819 Jy ! Total flux subtracted in 100 components = 0.127819 Jy ! Clean residual min=-0.015471 max=0.015110 Jy/beam ! Clean residual mean=0.000002 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 0.127819 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.127819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.117679Jy sigma=0.734172 ! Fit after self-cal, rms=0.117477Jy sigma=0.729619 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.695 mas, bpa=10.74 degrees ! Estimated noise=1.16897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00251076 Jy ! Component: 100 - total flux cleaned = -0.00450467 Jy ! Component: 150 - total flux cleaned = -0.00644244 Jy ! Component: 200 - total flux cleaned = -0.00766235 Jy ! Total flux subtracted in 200 components = -0.00766235 Jy ! Clean residual min=-0.011537 max=0.014145 Jy/beam ! Clean residual mean=0.000002 rms=0.003136 Jy/beam ! Combined flux in latest and established models = 0.120156 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.120156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112878Jy sigma=0.703114 ! Fit after self-cal, rms=0.112666Jy sigma=0.702636 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.682 x 8.695 at 10.74 degrees (North through East) ! Clean map min=-0.013115 max=0.13032 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 1.07 KP 1.23 LA 0.95 ! MK 1.07 NL 1.21 OV 0.94 PT 1.03 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 1.01 KP 1.32 LA 0.97 ! MK 1.10 NL 0.97 OV 0.91 PT 1.08 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.98 KP 1.26 LA 1.01 ! MK 1.05 NL 1.09 OV 0.92 PT 1.00 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.112666Jy sigma=0.702636 ! Fit after self-cal, rms=0.089230Jy sigma=0.660839 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.722 mas, bmaj=8.42 mas, bpa=12 degrees ! Estimated noise=1.17371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507192 Jy ! Component: 100 - total flux cleaned = 0.00740184 Jy ! Component: 150 - total flux cleaned = 0.0077065 Jy ! Component: 200 - total flux cleaned = 0.00770813 Jy ! Total flux subtracted in 200 components = 0.00770813 Jy ! Clean residual min=-0.009888 max=0.010639 Jy/beam ! Clean residual mean=0.000014 rms=0.002533 Jy/beam ! Combined flux in latest and established models = 0.127864 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.127864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088866Jy sigma=0.658888 ! Fit after self-cal, rms=0.088812Jy sigma=0.657386 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088812Jy sigma=0.657386 ! Fit after self-cal, rms=0.095586Jy sigma=0.583297 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.238 mas, bpa=12.7 degrees ! Estimated noise=1.18912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436905 Jy ! Component: 100 - total flux cleaned = 0.00648032 Jy ! Component: 150 - total flux cleaned = 0.00709757 Jy ! Component: 200 - total flux cleaned = 0.00743647 Jy ! Total flux subtracted in 200 components = 0.00743647 Jy ! Clean residual min=-0.003427 max=0.003722 Jy/beam ! Clean residual mean=-0.000001 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.135301 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.135301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095463Jy sigma=0.580743 ! Fit after self-cal, rms=0.095778Jy sigma=0.579334 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119263 Jy ! Component: 100 - total flux cleaned = 0.000203809 Jy ! Component: 150 - total flux cleaned = 0.000301212 Jy ! Component: 200 - total flux cleaned = 0.000365159 Jy ! Total flux subtracted in 200 components = 0.000365159 Jy ! Clean residual min=-0.003354 max=0.003738 Jy/beam ! Clean residual mean=-0.000000 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.135666 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.135666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095768Jy sigma=0.579175 ! Fit after self-cal, rms=0.095758Jy sigma=0.579167 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095758Jy sigma=0.579167 ! Fit after self-cal, rms=0.134798Jy sigma=0.584154 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=8.161 mas, bpa=13.63 degrees ! Estimated noise=1.22645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451313 Jy ! Component: 100 - total flux cleaned = 0.00704828 Jy ! Component: 150 - total flux cleaned = 0.00859458 Jy ! Component: 200 - total flux cleaned = 0.00939402 Jy ! Total flux subtracted in 200 components = 0.00939402 Jy ! Clean residual min=-0.004706 max=0.003876 Jy/beam ! Clean residual mean=-0.000002 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.14506 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.14506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134428Jy sigma=0.582741 ! Fit after self-cal, rms=0.134615Jy sigma=0.582587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.57559e-05 Jy ! Component: 100 - total flux cleaned = 0.000152353 Jy ! Component: 150 - total flux cleaned = 0.000178044 Jy ! Component: 200 - total flux cleaned = 0.000201423 Jy ! Total flux subtracted in 200 components = 0.000201423 Jy ! Clean residual min=-0.004638 max=0.003804 Jy/beam ! Clean residual mean=-0.000002 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.145262 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.145262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134594Jy sigma=0.582493 ! Fit after self-cal, rms=0.134584Jy sigma=0.582488 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.134584Jy sigma=0.582488 ! Fit after self-cal, rms=0.142337Jy sigma=0.582012 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=10.33 mas, bpa=20.03 degrees ! Estimated noise=1.46571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442254 Jy ! Component: 100 - total flux cleaned = 0.00663428 Jy ! Component: 150 - total flux cleaned = 0.00785936 Jy ! Component: 200 - total flux cleaned = 0.0085496 Jy ! Total flux subtracted in 200 components = 0.0085496 Jy ! Clean residual min=-0.006021 max=0.004556 Jy/beam ! Clean residual mean=0.000002 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.153811 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 81 components and 0.153811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.142129Jy sigma=0.581908 ! Fit after self-cal, rms=0.142143Jy sigma=0.581781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422473 Jy ! Component: 100 - total flux cleaned = 0.000489561 Jy ! Component: 150 - total flux cleaned = 0.000551439 Jy ! Component: 200 - total flux cleaned = 0.000585135 Jy ! Total flux subtracted in 200 components = 0.000585135 Jy ! Clean residual min=-0.006075 max=0.004556 Jy/beam ! Clean residual mean=0.000002 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.154396 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 81 components and 0.154396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.142142Jy sigma=0.581882 ! Fit after self-cal, rms=0.142139Jy sigma=0.581864 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=8.123 mas, bpa=14.3 degrees ! Estimated noise=1.25964 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 8.123 at 14.3 degrees (North through East) ! Clean map min=-0.0045653 max=0.13607 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.563 mas, bpa=13.72 degrees ! Estimated noise=1.82027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103722 Jy ! Component: 100 - total flux cleaned = 0.131149 Jy ! Component: 150 - total flux cleaned = 0.143491 Jy ! Component: 200 - total flux cleaned = 0.149438 Jy ! Total flux subtracted in 200 components = 0.149438 Jy ! Clean residual min=-0.004858 max=0.004030 Jy/beam ! Clean residual mean=-0.000001 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.149438 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.149438 Jy ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=8.123 mas, bpa=14.3 degrees ! Estimated noise=1.25964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377449 Jy ! Component: 100 - total flux cleaned = 0.00432684 Jy ! Component: 150 - total flux cleaned = 0.0046847 Jy ! Component: 200 - total flux cleaned = 0.00487423 Jy ! Total flux subtracted in 200 components = 0.00487423 Jy ! Clean residual min=-0.004525 max=0.003744 Jy/beam ! Clean residual mean=-0.000001 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.154312 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.154312 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=10.33 mas, bpa=20.03 degrees ! Estimated noise=1.46571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924667 Jy ! Component: 100 - total flux cleaned = 0.000774927 Jy ! Component: 150 - total flux cleaned = 0.000728426 Jy ! Component: 200 - total flux cleaned = 0.000688946 Jy ! Total flux subtracted in 200 components = 0.000688946 Jy ! Clean residual min=-0.006342 max=0.004658 Jy/beam ! Clean residual mean=0.000001 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.155001 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.73822e-05 Jy ! Component: 100 - total flux cleaned = -1.84774e-05 Jy ! Component: 150 - total flux cleaned = -1.79814e-05 Jy ! Component: 200 - total flux cleaned = -3.30834e-06 Jy ! Total flux subtracted in 200 components = -3.30834e-06 Jy ! Clean residual min=-0.006317 max=0.004638 Jy/beam ! Clean residual mean=0.000001 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.154997 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.154997 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=8.123 mas, bpa=14.3 degrees ! Estimated noise=1.25964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263908 Jy ! Component: 100 - total flux cleaned = -0.000403419 Jy ! Component: 150 - total flux cleaned = -0.000487951 Jy ! Component: 200 - total flux cleaned = -0.000539923 Jy ! Total flux subtracted in 200 components = -0.000539923 Jy ! Clean residual min=-0.004493 max=0.003740 Jy/beam ! Clean residual mean=-0.000001 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.154457 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.154457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.142013Jy sigma=0.581478 ! Fit after self-cal, rms=0.141964Jy sigma=0.581426 wmodel J0509+3951_S_b_map.mod ! Writing 51 model components to file: J0509+3951_S_b_map.mod wobs J0509+3951_S_b_uvs.fits ! Writing UV FITS file: J0509+3951_S_b_uvs.fits wwins J0509+3951_S_b_map.win ! wwins: Wrote 1 windows to J0509+3951_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208734 Jy ! Component: 100 - total flux cleaned = -0.00374267 Jy ! Component: 150 - total flux cleaned = -0.00451588 Jy ! Component: 200 - total flux cleaned = -0.00512179 Jy ! Component: 250 - total flux cleaned = -0.00557813 Jy ! Component: 300 - total flux cleaned = -0.00608582 Jy ! Component: 350 - total flux cleaned = -0.00645748 Jy ! Component: 400 - total flux cleaned = -0.00657913 Jy ! Component: 450 - total flux cleaned = -0.00669846 Jy ! Component: 500 - total flux cleaned = -0.00675716 Jy ! Component: 550 - total flux cleaned = -0.00675646 Jy ! Component: 600 - total flux cleaned = -0.00675624 Jy ! Component: 650 - total flux cleaned = -0.00675657 Jy ! Component: 700 - total flux cleaned = -0.00681132 Jy ! Component: 750 - total flux cleaned = -0.006811 Jy ! Component: 800 - total flux cleaned = -0.00681061 Jy ! Component: 850 - total flux cleaned = -0.00686246 Jy ! Component: 900 - total flux cleaned = -0.00691402 Jy ! Component: 950 - total flux cleaned = -0.00686276 Jy ! Component: 1000 - total flux cleaned = -0.00691288 Jy ! Component: 1050 - total flux cleaned = -0.00691326 Jy ! Component: 1100 - total flux cleaned = -0.00696254 Jy ! Component: 1150 - total flux cleaned = -0.00696267 Jy ! Component: 1200 - total flux cleaned = -0.00701067 Jy ! Component: 1250 - total flux cleaned = -0.0071057 Jy ! Component: 1300 - total flux cleaned = -0.00715238 Jy ! Component: 1350 - total flux cleaned = -0.00724477 Jy ! Component: 1400 - total flux cleaned = -0.0071989 Jy ! Component: 1450 - total flux cleaned = -0.00728998 Jy ! Component: 1500 - total flux cleaned = -0.00733479 Jy ! Component: 1550 - total flux cleaned = -0.00742352 Jy ! Component: 1600 - total flux cleaned = -0.00733592 Jy ! Component: 1650 - total flux cleaned = -0.00733587 Jy ! Component: 1700 - total flux cleaned = -0.00720706 Jy ! Component: 1750 - total flux cleaned = -0.00720676 Jy ! Component: 1800 - total flux cleaned = -0.00712198 Jy ! Component: 1850 - total flux cleaned = -0.0070797 Jy ! Component: 1900 - total flux cleaned = -0.00707942 Jy ! Component: 1950 - total flux cleaned = -0.00703807 Jy ! Component: 2000 - total flux cleaned = -0.00699697 Jy ! Component: 2050 - total flux cleaned = -0.00691565 Jy ! Component: 2100 - total flux cleaned = -0.00687564 Jy ! Component: 2150 - total flux cleaned = -0.00691522 Jy ! Component: 2200 - total flux cleaned = -0.00687539 Jy ! Component: 2250 - total flux cleaned = -0.00687557 Jy ! Component: 2300 - total flux cleaned = -0.0067979 Jy ! Component: 2350 - total flux cleaned = -0.00675937 Jy ! Component: 2400 - total flux cleaned = -0.00675948 Jy ! Component: 2450 - total flux cleaned = -0.00668333 Jy ! Component: 2500 - total flux cleaned = -0.00672094 Jy ! Component: 2550 - total flux cleaned = -0.00664644 Jy ! Component: 2600 - total flux cleaned = -0.00668367 Jy ! Component: 2650 - total flux cleaned = -0.00668391 Jy ! Component: 2700 - total flux cleaned = -0.00661087 Jy ! Component: 2750 - total flux cleaned = -0.00675644 Jy ! Component: 2800 - total flux cleaned = -0.00675611 Jy ! Component: 2850 - total flux cleaned = -0.00682792 Jy ! Component: 2900 - total flux cleaned = -0.00682757 Jy ! Component: 2950 - total flux cleaned = -0.00686309 Jy ! Component: 3000 - total flux cleaned = -0.00682828 Jy ! Component: 3050 - total flux cleaned = -0.00696817 Jy ! Component: 3100 - total flux cleaned = -0.00693356 Jy ! Component: 3150 - total flux cleaned = -0.00700266 Jy ! Component: 3200 - total flux cleaned = -0.00707106 Jy ! Component: 3250 - total flux cleaned = -0.00707117 Jy ! Component: 3300 - total flux cleaned = -0.00713876 Jy ! Component: 3350 - total flux cleaned = -0.007206 Jy ! Component: 3400 - total flux cleaned = -0.00717248 Jy ! Component: 3450 - total flux cleaned = -0.00727203 Jy ! Component: 3500 - total flux cleaned = -0.00737042 Jy ! Component: 3550 - total flux cleaned = -0.00733763 Jy ! Component: 3600 - total flux cleaned = -0.00740301 Jy ! Component: 3650 - total flux cleaned = -0.00750005 Jy ! Component: 3700 - total flux cleaned = -0.00756393 Jy ! Component: 3750 - total flux cleaned = -0.00759581 Jy ! Component: 3800 - total flux cleaned = -0.00769099 Jy ! Component: 3850 - total flux cleaned = -0.00769105 Jy ! Component: 3900 - total flux cleaned = -0.00775393 Jy ! Component: 3950 - total flux cleaned = -0.00784748 Jy ! Component: 4000 - total flux cleaned = -0.00787864 Jy ! Component: 4050 - total flux cleaned = -0.00797123 Jy ! Total flux subtracted in 4096 components = -0.00806293 Jy ! Clean residual min=-0.001626 max=0.001538 Jy/beam ! Clean residual mean=0.000006 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.146395 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 359 components and 0.146395 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0509+3951_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 8.123 at 14.3 degrees (North through East) ! Clean map min=-0.0047088 max=0.14016 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0509+3951_S_b_map.fits wmodel /image_prod/ug002_uva//J0509+3951_S_b_map.mod ! Writing 359 model components to file: /image_prod/ug002_uva//J0509+3951_S_b_map.mod wobs /image_prod/ug002_uva//J0509+3951_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0509+3951_S_b_uvs.fits wwins /image_prod/ug002_uva//J0509+3951_S_b_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0509+3951_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.140156 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000607387 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30009 1.30009 2.60019 5.20038 10.4008 20.8015 41.603 83.206 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.14 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 230.752 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0509+3951_S_b_dfm.log closed on Wed Mar 4 20:42:41 2020