! Started logfile: /image_prod/ug002_uva//J0508-3308_S_dfm.log on Wed Mar 4 20:42:03 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0508-3308_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0508-3308_S_uva.fits ! AN table 1: 60 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.999206 visibilities/baseline/integration-bin. ! Found source: J0508-3308 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 3777 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0508-3308_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.005251Jy sigma=5.501562 ! Fit after self-cal, rms=0.934099Jy sigma=5.121175 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=6.355 mas, bpa=-6.1 degrees ! Estimated noise=3.24626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535061 Jy ! Component: 100 - total flux cleaned = 0.0660591 Jy ! Total flux subtracted in 100 components = 0.0660591 Jy ! Clean residual min=-0.005966 max=0.006620 Jy/beam ! Clean residual mean=-0.000030 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.0660591 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0660591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092328Jy sigma=0.432576 ! Fit after self-cal, rms=0.091703Jy sigma=0.429642 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=7.05 mas, bpa=-4.456 degrees ! Estimated noise=2.19251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794793 Jy ! Component: 100 - total flux cleaned = 0.0119654 Jy ! Component: 150 - total flux cleaned = 0.0141212 Jy ! Component: 200 - total flux cleaned = 0.0153131 Jy ! Total flux subtracted in 200 components = 0.0153131 Jy ! Clean residual min=-0.005038 max=0.004378 Jy/beam ! Clean residual mean=-0.000006 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.0813722 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.0813723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091083Jy sigma=0.425362 ! Fit after self-cal, rms=0.091084Jy sigma=0.425012 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.737 x 7.05 at -4.456 degrees (North through East) ! Clean map min=-0.0050472 max=0.069039 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.07 KP 0.97 MK 1.03 ! NL 1.07 OV 0.89 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 KP 1.07 MK 0.97 ! NL 1.20 OV 0.85 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 KP 1.01 MK 1.11 ! NL 0.83 OV 0.93 SC 0.94 ! ! ! Fit before self-cal, rms=0.091084Jy sigma=0.425012 ! Fit after self-cal, rms=0.091102Jy sigma=0.422261 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.097 mas, bpa=-4.27 degrees ! Estimated noise=2.19054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.32095e-05 Jy ! Component: 100 - total flux cleaned = -5.44372e-05 Jy ! Component: 150 - total flux cleaned = -2.88273e-05 Jy ! Component: 200 - total flux cleaned = 1.20635e-05 Jy ! Total flux subtracted in 200 components = 1.20635e-05 Jy ! Clean residual min=-0.003669 max=0.003937 Jy/beam ! Clean residual mean=-0.000004 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.0813843 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.0813843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091078Jy sigma=0.422216 ! Fit after self-cal, rms=0.091156Jy sigma=0.421806 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091156Jy sigma=0.421806 ! Fit after self-cal, rms=0.091424Jy sigma=0.420480 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.784 mas, bmaj=7.099 mas, bpa=-4.041 degrees ! Estimated noise=2.20198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282862 Jy ! Component: 100 - total flux cleaned = 0.000301461 Jy ! Component: 150 - total flux cleaned = 0.000335697 Jy ! Component: 200 - total flux cleaned = 0.000365554 Jy ! Total flux subtracted in 200 components = 0.000365554 Jy ! Clean residual min=-0.003323 max=0.003472 Jy/beam ! Clean residual mean=-0.000004 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.0817499 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0817499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091413Jy sigma=0.420453 ! Fit after self-cal, rms=0.091426Jy sigma=0.420347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172906 Jy ! Component: 100 - total flux cleaned = 0.000189362 Jy ! Component: 150 - total flux cleaned = 0.000218887 Jy ! Component: 200 - total flux cleaned = 0.000205074 Jy ! Total flux subtracted in 200 components = 0.000205074 Jy ! Clean residual min=-0.003405 max=0.003491 Jy/beam ! Clean residual mean=-0.000003 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.081955 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0819549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091418Jy sigma=0.420334 ! Fit after self-cal, rms=0.091416Jy sigma=0.420329 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091416Jy sigma=0.420329 ! Fit after self-cal, rms=0.091267Jy sigma=0.420147 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=7.101 mas, bpa=-3.9 degrees ! Estimated noise=2.19908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152528 Jy ! Component: 100 - total flux cleaned = -0.000153466 Jy ! Component: 150 - total flux cleaned = -0.000154584 Jy ! Component: 200 - total flux cleaned = -0.000166394 Jy ! Total flux subtracted in 200 components = -0.000166394 Jy ! Clean residual min=-0.003332 max=0.003402 Jy/beam ! Clean residual mean=-0.000006 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0817886 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0817886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091259Jy sigma=0.420135 ! Fit after self-cal, rms=0.091246Jy sigma=0.420110 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101965 Jy ! Component: 100 - total flux cleaned = 0.000114833 Jy ! Component: 150 - total flux cleaned = 0.000115103 Jy ! Component: 200 - total flux cleaned = 0.000104081 Jy ! Total flux subtracted in 200 components = 0.000104081 Jy ! Clean residual min=-0.003354 max=0.003371 Jy/beam ! Clean residual mean=-0.000006 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.0818926 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.0818926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091240Jy sigma=0.420102 ! Fit after self-cal, rms=0.091241Jy sigma=0.420099 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091241Jy sigma=0.420099 ! Fit after self-cal, rms=0.090994Jy sigma=0.420090 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.274 mas, bmaj=18.13 mas, bpa=-1.701 degrees ! Estimated noise=2.95103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129125 Jy ! Component: 100 - total flux cleaned = -0.000129296 Jy ! Component: 150 - total flux cleaned = -0.0001245 Jy ! Component: 200 - total flux cleaned = -0.000108258 Jy ! Total flux subtracted in 200 components = -0.000108258 Jy ! Clean residual min=-0.004173 max=0.003391 Jy/beam ! Clean residual mean=-0.000013 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.0817844 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.0817844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091003Jy sigma=0.420088 ! Fit after self-cal, rms=0.090993Jy sigma=0.420051 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.91395e-06 Jy ! Component: 100 - total flux cleaned = -4.57291e-06 Jy ! Component: 150 - total flux cleaned = -1.90439e-06 Jy ! Component: 200 - total flux cleaned = -2.22964e-06 Jy ! Total flux subtracted in 200 components = -2.22964e-06 Jy ! Clean residual min=-0.004134 max=0.003377 Jy/beam ! Clean residual mean=-0.000013 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0817822 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.0817822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091006Jy sigma=0.420067 ! Fit after self-cal, rms=0.090998Jy sigma=0.420034 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.104 mas, bpa=-3.769 degrees ! Estimated noise=2.19524 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.787 x 7.104 at -3.769 degrees (North through East) ! Clean map min=-0.0032573 max=0.068574 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=6.393 mas, bpa=-5.277 degrees ! Estimated noise=3.26611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053802 Jy ! Component: 100 - total flux cleaned = 0.0671148 Jy ! Component: 150 - total flux cleaned = 0.0732499 Jy ! Component: 200 - total flux cleaned = 0.0767484 Jy ! Total flux subtracted in 200 components = 0.0767484 Jy ! Clean residual min=-0.004910 max=0.005403 Jy/beam ! Clean residual mean=-0.000011 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.0767484 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0767484 Jy ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.104 mas, bpa=-3.769 degrees ! Estimated noise=2.19524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287733 Jy ! Component: 100 - total flux cleaned = 0.00420144 Jy ! Component: 150 - total flux cleaned = 0.00436183 Jy ! Component: 200 - total flux cleaned = 0.00443391 Jy ! Total flux subtracted in 200 components = 0.00443391 Jy ! Clean residual min=-0.003282 max=0.003281 Jy/beam ! Clean residual mean=-0.000006 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0811823 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.0811823 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.274 mas, bmaj=18.13 mas, bpa=-1.701 degrees ! Estimated noise=2.95103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440963 Jy ! Component: 100 - total flux cleaned = 0.000434234 Jy ! Component: 150 - total flux cleaned = 0.000430783 Jy ! Component: 200 - total flux cleaned = 0.000447504 Jy ! Total flux subtracted in 200 components = 0.000447504 Jy ! Clean residual min=-0.004224 max=0.003320 Jy/beam ! Clean residual mean=-0.000013 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.0816298 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58113e-05 Jy ! Component: 100 - total flux cleaned = 4.25222e-05 Jy ! Component: 150 - total flux cleaned = 6.42294e-05 Jy ! Component: 200 - total flux cleaned = 9.05847e-05 Jy ! Total flux subtracted in 200 components = 9.05847e-05 Jy ! Clean residual min=-0.004137 max=0.003360 Jy/beam ! Clean residual mean=-0.000013 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.0817204 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.0817204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.104 mas, bpa=-3.769 degrees ! Estimated noise=2.19524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569489 Jy ! Component: 100 - total flux cleaned = -0.000577008 Jy ! Component: 150 - total flux cleaned = -0.000546995 Jy ! Component: 200 - total flux cleaned = -0.000491651 Jy ! Total flux subtracted in 200 components = -0.000491651 Jy ! Clean residual min=-0.003410 max=0.003214 Jy/beam ! Clean residual mean=-0.000007 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.0812287 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0812287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091016Jy sigma=0.420076 ! Fit after self-cal, rms=0.091013Jy sigma=0.420058 wmodel J0508-3308_S_map.mod ! Writing 36 model components to file: J0508-3308_S_map.mod wobs J0508-3308_S_uvs.fits ! Writing UV FITS file: J0508-3308_S_uvs.fits wwins J0508-3308_S_map.win ! wwins: Wrote 1 windows to J0508-3308_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000617693 Jy ! Component: 100 - total flux cleaned = -0.000948757 Jy ! Component: 150 - total flux cleaned = -0.00120859 Jy ! Component: 200 - total flux cleaned = -0.00130588 Jy ! Component: 250 - total flux cleaned = -0.00144661 Jy ! Component: 300 - total flux cleaned = -0.00153603 Jy ! Component: 350 - total flux cleaned = -0.00149327 Jy ! Component: 400 - total flux cleaned = -0.00149409 Jy ! Component: 450 - total flux cleaned = -0.00165277 Jy ! Component: 500 - total flux cleaned = -0.00184354 Jy ! Component: 550 - total flux cleaned = -0.00195439 Jy ! Component: 600 - total flux cleaned = -0.00206359 Jy ! Component: 650 - total flux cleaned = -0.00230833 Jy ! Component: 700 - total flux cleaned = -0.00237559 Jy ! Component: 750 - total flux cleaned = -0.00250704 Jy ! Component: 800 - total flux cleaned = -0.00257118 Jy ! Component: 850 - total flux cleaned = -0.00266501 Jy ! Component: 900 - total flux cleaned = -0.00266477 Jy ! Component: 950 - total flux cleaned = -0.00269476 Jy ! Component: 1000 - total flux cleaned = -0.0026659 Jy ! Component: 1050 - total flux cleaned = -0.0026657 Jy ! Component: 1100 - total flux cleaned = -0.00261003 Jy ! Component: 1150 - total flux cleaned = -0.00261024 Jy ! Component: 1200 - total flux cleaned = -0.00255697 Jy ! Component: 1250 - total flux cleaned = -0.00258316 Jy ! Component: 1300 - total flux cleaned = -0.00258314 Jy ! Component: 1350 - total flux cleaned = -0.00263344 Jy ! Component: 1400 - total flux cleaned = -0.0026084 Jy ! Component: 1450 - total flux cleaned = -0.00263305 Jy ! Component: 1500 - total flux cleaned = -0.00270528 Jy ! Component: 1550 - total flux cleaned = -0.00275246 Jy ! Component: 1600 - total flux cleaned = -0.00282259 Jy ! Component: 1650 - total flux cleaned = -0.00289171 Jy ! Component: 1700 - total flux cleaned = -0.00300549 Jy ! Component: 1750 - total flux cleaned = -0.00309532 Jy ! Component: 1800 - total flux cleaned = -0.00316198 Jy ! Component: 1850 - total flux cleaned = -0.00320575 Jy ! Component: 1900 - total flux cleaned = -0.00324931 Jy ! Component: 1950 - total flux cleaned = -0.00327107 Jy ! Component: 2000 - total flux cleaned = -0.00335701 Jy ! Component: 2050 - total flux cleaned = -0.00337839 Jy ! Component: 2100 - total flux cleaned = -0.0033152 Jy ! Component: 2150 - total flux cleaned = -0.00341974 Jy ! Component: 2200 - total flux cleaned = -0.00337803 Jy ! Component: 2250 - total flux cleaned = -0.00337789 Jy ! Component: 2300 - total flux cleaned = -0.00333725 Jy ! Component: 2350 - total flux cleaned = -0.00335766 Jy ! Component: 2400 - total flux cleaned = -0.0033576 Jy ! Component: 2450 - total flux cleaned = -0.00327754 Jy ! Component: 2500 - total flux cleaned = -0.0033174 Jy ! Component: 2550 - total flux cleaned = -0.00329776 Jy ! Component: 2600 - total flux cleaned = -0.00333699 Jy ! Component: 2650 - total flux cleaned = -0.00331759 Jy ! Component: 2700 - total flux cleaned = -0.00331761 Jy ! Component: 2750 - total flux cleaned = -0.00329844 Jy ! Component: 2800 - total flux cleaned = -0.00329857 Jy ! Component: 2850 - total flux cleaned = -0.00331755 Jy ! Component: 2900 - total flux cleaned = -0.00331736 Jy ! Component: 2950 - total flux cleaned = -0.00331721 Jy ! Component: 3000 - total flux cleaned = -0.00331733 Jy ! Component: 3050 - total flux cleaned = -0.0032801 Jy ! Component: 3100 - total flux cleaned = -0.00331725 Jy ! Component: 3150 - total flux cleaned = -0.0032618 Jy ! Component: 3200 - total flux cleaned = -0.00326178 Jy ! Component: 3250 - total flux cleaned = -0.00328017 Jy ! Component: 3300 - total flux cleaned = -0.00328012 Jy ! Component: 3350 - total flux cleaned = -0.00333486 Jy ! Component: 3400 - total flux cleaned = -0.00340771 Jy ! Component: 3450 - total flux cleaned = -0.00342587 Jy ! Component: 3500 - total flux cleaned = -0.00353473 Jy ! Component: 3550 - total flux cleaned = -0.00353478 Jy ! Component: 3600 - total flux cleaned = -0.00357105 Jy ! Component: 3650 - total flux cleaned = -0.00367967 Jy ! Component: 3700 - total flux cleaned = -0.00367971 Jy ! Component: 3750 - total flux cleaned = -0.0036978 Jy ! Component: 3800 - total flux cleaned = -0.003752 Jy ! Component: 3850 - total flux cleaned = -0.00375201 Jy ! Component: 3900 - total flux cleaned = -0.00380619 Jy ! Component: 3950 - total flux cleaned = -0.00382423 Jy ! Component: 4000 - total flux cleaned = -0.00382421 Jy ! Component: 4050 - total flux cleaned = -0.00387834 Jy ! Total flux subtracted in 4096 components = -0.00393264 Jy ! Clean residual min=-0.001157 max=0.001133 Jy/beam ! Clean residual mean=-0.000003 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0772961 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 267 components and 0.0772961 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0508-3308_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.787 x 7.104 at -3.769 degrees (North through East) ! Clean map min=-0.0029314 max=0.068346 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0508-3308_S_map.fits wmodel /image_prod/ug002_uva//J0508-3308_S_map.mod ! Writing 267 model components to file: /image_prod/ug002_uva//J0508-3308_S_map.mod wobs /image_prod/ug002_uva//J0508-3308_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0508-3308_S_uvs.fits wwins /image_prod/ug002_uva//J0508-3308_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0508-3308_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0683464 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270841 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18883 1.18883 2.37766 4.75532 9.51064 19.0213 38.0425 76.0851 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.068 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 252.349 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0508-3308_S_dfm.log closed on Wed Mar 4 20:42:07 2020