! Started logfile: /image_prod/ug002_uva//J0508-1935_S_dfm.log on Wed Mar  4 20:41:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0508-1935_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0508-1935_S_uva.fits
! AN table 1: 30 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.887963 visibilities/baseline/integration-bin.
! Found source: J0508-1935
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2877 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0508-1935_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004617Jy  sigma=7.076363
! Fit after  self-cal, rms=0.930906Jy  sigma=6.522204
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.509 mas, bmaj=19.01 mas, bpa=-12.71 degrees
! Estimated noise=2.34402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0571354 Jy
! Component: 100  -  total flux cleaned = 0.0711063 Jy
! Total flux subtracted in 100 components = 0.0711063 Jy
! Clean residual min=-0.004569 max=0.005253 Jy/beam
! Clean residual mean=-0.000019 rms=0.001336 Jy/beam
! Combined flux in latest and established models = 0.0711063 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0711063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077064Jy  sigma=0.470456
! Fit after  self-cal, rms=0.076249Jy  sigma=0.464848
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.219 mas, bmaj=19.23 mas, bpa=-11.68 degrees
! Estimated noise=1.94893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00637581 Jy
! Component: 100  -  total flux cleaned = 0.00926894 Jy
! Component: 150  -  total flux cleaned = 0.0108174 Jy
! Component: 200  -  total flux cleaned = 0.0115708 Jy
! Total flux subtracted in 200 components = 0.0115708 Jy
! Clean residual min=-0.003518 max=0.003466 Jy/beam
! Clean residual mean=-0.000006 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.0826772 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 33 components and 0.0826772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075750Jy  sigma=0.461055
! Fit after  self-cal, rms=0.075715Jy  sigma=0.460864
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.219 x 19.23 at -11.68 degrees (North through East)
! Clean map  min=-0.0036202  max=0.073133 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.00     KP        1.01     
!   LA        1.13     MK        0.93     NL        0.94     OV        0.97     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.89     HN        0.99     KP        1.00     
!   LA        1.03     MK        1.07     NL        1.09     OV        1.01     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.04     KP        0.96     
!   LA        1.05     MK        1.12     NL        0.96     OV        1.03     
!   PT        1.03     
! 
! 
! Fit before self-cal, rms=0.075715Jy  sigma=0.460864
! Fit after  self-cal, rms=0.077091Jy  sigma=0.459451
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.25 mas, bmaj=19.18 mas, bpa=-11.61 degrees
! Estimated noise=1.95579 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000918187 Jy
! Component: 100  -  total flux cleaned = 0.000960916 Jy
! Component: 150  -  total flux cleaned = 0.00103204 Jy
! Component: 200  -  total flux cleaned = 0.00106216 Jy
! Total flux subtracted in 200 components = 0.00106216 Jy
! Clean residual min=-0.003397 max=0.003622 Jy/beam
! Clean residual mean=-0.000005 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.0837393 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0837393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077027Jy  sigma=0.459163
! Fit after  self-cal, rms=0.077077Jy  sigma=0.459020
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077077Jy  sigma=0.459020
! Fit after  self-cal, rms=0.075988Jy  sigma=0.457170
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.263 mas, bmaj=19.01 mas, bpa=-11.63 degrees
! Estimated noise=1.9527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.00352e-05 Jy
! Component: 100  -  total flux cleaned = 7.89132e-05 Jy
! Component: 150  -  total flux cleaned = 0.000141924 Jy
! Component: 200  -  total flux cleaned = 0.000113195 Jy
! Total flux subtracted in 200 components = 0.000113195 Jy
! Clean residual min=-0.003080 max=0.003456 Jy/beam
! Clean residual mean=0.000002 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.0838525 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.0838525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075944Jy  sigma=0.456969
! Fit after  self-cal, rms=0.075936Jy  sigma=0.456848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.007e-05 Jy
! Component: 100  -  total flux cleaned = 4.88517e-05 Jy
! Component: 150  -  total flux cleaned = 2.3313e-05 Jy
! Component: 200  -  total flux cleaned = -2.3285e-05 Jy
! Total flux subtracted in 200 components = -2.3285e-05 Jy
! Clean residual min=-0.003008 max=0.003380 Jy/beam
! Clean residual mean=0.000002 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.0838292 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.0838292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075907Jy  sigma=0.456733
! Fit after  self-cal, rms=0.075900Jy  sigma=0.456707
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075900Jy  sigma=0.456707
! Fit after  self-cal, rms=0.075714Jy  sigma=0.456680
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.274 mas, bmaj=18.92 mas, bpa=-11.61 degrees
! Estimated noise=1.95103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149787 Jy
! Component: 100  -  total flux cleaned = 0.00017639 Jy
! Component: 150  -  total flux cleaned = 0.000176681 Jy
! Component: 200  -  total flux cleaned = 0.000176646 Jy
! Total flux subtracted in 200 components = 0.000176646 Jy
! Clean residual min=-0.003000 max=0.003333 Jy/beam
! Clean residual mean=0.000003 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.0840059 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.0840059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075692Jy  sigma=0.456576
! Fit after  self-cal, rms=0.075689Jy  sigma=0.456558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.40663e-05 Jy
! Component: 100  -  total flux cleaned = -5.84808e-05 Jy
! Component: 150  -  total flux cleaned = -7.85719e-05 Jy
! Component: 200  -  total flux cleaned = -9.72886e-05 Jy
! Total flux subtracted in 200 components = -9.72886e-05 Jy
! Clean residual min=-0.003001 max=0.003299 Jy/beam
! Clean residual mean=0.000003 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.0839086 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.0839086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075674Jy  sigma=0.456490
! Fit after  self-cal, rms=0.075671Jy  sigma=0.456478
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075671Jy  sigma=0.456478
! Fit after  self-cal, rms=0.075562Jy  sigma=0.456468
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.387 mas, bmaj=21.52 mas, bpa=-3.935 degrees
! Estimated noise=2.1335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.63087e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109667 Jy
! Component: 150  -  total flux cleaned = -0.000109353 Jy
! Component: 200  -  total flux cleaned = -0.000109676 Jy
! Total flux subtracted in 200 components = -0.000109676 Jy
! Clean residual min=-0.003362 max=0.003532 Jy/beam
! Clean residual mean=0.000005 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0837989 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.0837989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075560Jy  sigma=0.456458
! Fit after  self-cal, rms=0.075560Jy  sigma=0.456449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.69628e-05 Jy
! Component: 100  -  total flux cleaned = -4.9837e-05 Jy
! Component: 150  -  total flux cleaned = -4.94646e-05 Jy
! Component: 200  -  total flux cleaned = -6.02437e-05 Jy
! Total flux subtracted in 200 components = -6.02437e-05 Jy
! Clean residual min=-0.003347 max=0.003517 Jy/beam
! Clean residual mean=0.000005 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.0837387 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 0.0837387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075558Jy  sigma=0.456440
! Fit after  self-cal, rms=0.075558Jy  sigma=0.456435
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=18.85 mas, bpa=-11.58 degrees
! Estimated noise=1.9511 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.282 x 18.85 at -11.58 degrees (North through East)
! Clean map  min=-0.0029911  max=0.072388 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.566 mas, bmaj=18.59 mas, bpa=-12.63 degrees
! Estimated noise=2.34714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0576784 Jy
! Component: 100  -  total flux cleaned = 0.0733403 Jy
! Component: 150  -  total flux cleaned = 0.0801134 Jy
! Component: 200  -  total flux cleaned = 0.0826051 Jy
! Total flux subtracted in 200 components = 0.0826051 Jy
! Clean residual min=-0.004465 max=0.004304 Jy/beam
! Clean residual mean=-0.000004 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.0826051 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0826051 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=18.85 mas, bpa=-11.58 degrees
! Estimated noise=1.9511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 45.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216115 Jy
! Component: 100  -  total flux cleaned = 0.00311748 Jy
! Component: 150  -  total flux cleaned = 0.00317889 Jy
! Component: 200  -  total flux cleaned = 0.00324127 Jy
! Total flux subtracted in 200 components = 0.00324127 Jy
! Clean residual min=-0.003201 max=0.003399 Jy/beam
! Clean residual mean=0.000002 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.0858464 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 38 components and 0.0858464 Jy
! Inverting map 
! Added new window around map position (26, 45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195415 Jy
! Component: 100  -  total flux cleaned = 0.00252028 Jy
! Component: 150  -  total flux cleaned = 0.00297869 Jy
! Component: 200  -  total flux cleaned = 0.00315628 Jy
! Total flux subtracted in 200 components = 0.00315628 Jy
! Clean residual min=-0.002651 max=0.002774 Jy/beam
! Clean residual mean=0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0890026 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 57 components and 0.0890026 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.387 mas, bmaj=21.52 mas, bpa=-3.935 degrees
! Estimated noise=2.1335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.48838e-05 Jy
! Component: 100  -  total flux cleaned = -3.50485e-05 Jy
! Component: 150  -  total flux cleaned = -3.44939e-05 Jy
! Component: 200  -  total flux cleaned = 4.82611e-05 Jy
! Total flux subtracted in 200 components = 4.82611e-05 Jy
! Clean residual min=-0.002570 max=0.002747 Jy/beam
! Clean residual mean=0.000000 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.0890509 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189073 Jy
! Component: 100  -  total flux cleaned = 0.000363727 Jy
! Component: 150  -  total flux cleaned = 0.000526369 Jy
! Component: 200  -  total flux cleaned = 0.000556314 Jy
! Total flux subtracted in 200 components = 0.000556314 Jy
! Clean residual min=-0.002342 max=0.002588 Jy/beam
! Clean residual mean=0.000000 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.0896072 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 119 components and 0.0896072 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=18.85 mas, bpa=-11.58 degrees
! Estimated noise=1.9511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.65615e-05 Jy
! Component: 100  -  total flux cleaned = 0.000263357 Jy
! Component: 150  -  total flux cleaned = 0.000263551 Jy
! Component: 200  -  total flux cleaned = 0.000265037 Jy
! Total flux subtracted in 200 components = 0.000265037 Jy
! Clean residual min=-0.002574 max=0.002466 Jy/beam
! Clean residual mean=0.000000 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.0898723 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 143 components and 0.0898723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075254Jy  sigma=0.453902
! Fit after  self-cal, rms=0.075203Jy  sigma=0.453608
wmodel J0508-1935_S_map.mod
! Writing 143 model components to file: J0508-1935_S_map.mod
wobs   J0508-1935_S_uvs.fits
! Writing UV FITS file: J0508-1935_S_uvs.fits
wwins  J0508-1935_S_map.win
! wwins: Wrote 3 windows to J0508-1935_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000673487 Jy
! Component: 100  -  total flux cleaned = 0.00108003 Jy
! Component: 150  -  total flux cleaned = 0.00112088 Jy
! Component: 200  -  total flux cleaned = 0.00105068 Jy
! Component: 250  -  total flux cleaned = 0.00101732 Jy
! Component: 300  -  total flux cleaned = 0.00104915 Jy
! Component: 350  -  total flux cleaned = 0.0010488 Jy
! Component: 400  -  total flux cleaned = 0.000989379 Jy
! Component: 450  -  total flux cleaned = 0.000901848 Jy
! Component: 500  -  total flux cleaned = 0.000759826 Jy
! Component: 550  -  total flux cleaned = 0.000565829 Jy
! Component: 600  -  total flux cleaned = 0.000296072 Jy
! Component: 650  -  total flux cleaned = 0.000137561 Jy
! Component: 700  -  total flux cleaned = -1.7874e-05 Jy
! Component: 750  -  total flux cleaned = -0.000120241 Jy
! Component: 800  -  total flux cleaned = -0.000320559 Jy
! Component: 850  -  total flux cleaned = -0.00046816 Jy
! Component: 900  -  total flux cleaned = -0.000565176 Jy
! Component: 950  -  total flux cleaned = -0.000755003 Jy
! Component: 1000  -  total flux cleaned = -0.000801995 Jy
! Component: 1050  -  total flux cleaned = -0.000894388 Jy
! Component: 1100  -  total flux cleaned = -0.00100774 Jy
! Component: 1150  -  total flux cleaned = -0.0010969 Jy
! Component: 1200  -  total flux cleaned = -0.00120653 Jy
! Component: 1250  -  total flux cleaned = -0.00127106 Jy
! Component: 1300  -  total flux cleaned = -0.00137732 Jy
! Component: 1350  -  total flux cleaned = -0.00148196 Jy
! Component: 1400  -  total flux cleaned = -0.00152348 Jy
! Component: 1450  -  total flux cleaned = -0.00166626 Jy
! Component: 1500  -  total flux cleaned = -0.00168645 Jy
! Component: 1550  -  total flux cleaned = -0.00172652 Jy
! Component: 1600  -  total flux cleaned = -0.00182463 Jy
! Component: 1650  -  total flux cleaned = -0.00186322 Jy
! Component: 1700  -  total flux cleaned = -0.0018631 Jy
! Component: 1750  -  total flux cleaned = -0.0019198 Jy
! Component: 1800  -  total flux cleaned = -0.00190099 Jy
! Component: 1850  -  total flux cleaned = -0.00190082 Jy
! Component: 1900  -  total flux cleaned = -0.00190083 Jy
! Component: 1950  -  total flux cleaned = -0.0019367 Jy
! Component: 2000  -  total flux cleaned = -0.00190083 Jy
! Component: 2050  -  total flux cleaned = -0.00190054 Jy
! Component: 2100  -  total flux cleaned = -0.00191784 Jy
! Component: 2150  -  total flux cleaned = -0.00188302 Jy
! Component: 2200  -  total flux cleaned = -0.00191728 Jy
! Component: 2250  -  total flux cleaned = -0.00191753 Jy
! Component: 2300  -  total flux cleaned = -0.00195125 Jy
! Component: 2350  -  total flux cleaned = -0.00196778 Jy
! Component: 2400  -  total flux cleaned = -0.00200064 Jy
! Component: 2450  -  total flux cleaned = -0.00196792 Jy
! Component: 2500  -  total flux cleaned = -0.00201651 Jy
! Component: 2550  -  total flux cleaned = -0.00204864 Jy
! Component: 2600  -  total flux cleaned = -0.00203242 Jy
! Component: 2650  -  total flux cleaned = -0.00200071 Jy
! Component: 2700  -  total flux cleaned = -0.00204793 Jy
! Component: 2750  -  total flux cleaned = -0.0021106 Jy
! Component: 2800  -  total flux cleaned = -0.00209498 Jy
! Component: 2850  -  total flux cleaned = -0.0021414 Jy
! Component: 2900  -  total flux cleaned = -0.00212603 Jy
! Component: 2950  -  total flux cleaned = -0.00220212 Jy
! Component: 3000  -  total flux cleaned = -0.00218701 Jy
! Component: 3050  -  total flux cleaned = -0.00227698 Jy
! Component: 3100  -  total flux cleaned = -0.00226204 Jy
! Component: 3150  -  total flux cleaned = -0.00230658 Jy
! Component: 3200  -  total flux cleaned = -0.00232126 Jy
! Component: 3250  -  total flux cleaned = -0.00236505 Jy
! Component: 3300  -  total flux cleaned = -0.00243755 Jy
! Component: 3350  -  total flux cleaned = -0.0023798 Jy
! Component: 3400  -  total flux cleaned = -0.00240866 Jy
! Component: 3450  -  total flux cleaned = -0.00243726 Jy
! Component: 3500  -  total flux cleaned = -0.00245142 Jy
! Component: 3550  -  total flux cleaned = -0.00240905 Jy
! Component: 3600  -  total flux cleaned = -0.00246521 Jy
! Component: 3650  -  total flux cleaned = -0.00250713 Jy
! Component: 3700  -  total flux cleaned = -0.00245175 Jy
! Component: 3750  -  total flux cleaned = -0.00250706 Jy
! Component: 3800  -  total flux cleaned = -0.0024933 Jy
! Component: 3850  -  total flux cleaned = -0.0025069 Jy
! Component: 3900  -  total flux cleaned = -0.00247978 Jy
! Component: 3950  -  total flux cleaned = -0.00249338 Jy
! Component: 4000  -  total flux cleaned = -0.00246652 Jy
! Component: 4050  -  total flux cleaned = -0.00247999 Jy
! Total flux subtracted in 4096 components = -0.00251994 Jy
! Clean residual min=-0.000961 max=0.000776 Jy/beam
! Clean residual mean=0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.0873524 Jy
keep
! Adding 249 model components to the UV plane model.
! The established model now contains 392 components and 0.0873523 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0508-1935_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.282 x 18.85 at -11.58 degrees (North through East)
! Clean map  min=-0.0023098  max=0.071737 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0508-1935_S_map.fits
wmodel /image_prod/ug002_uva//J0508-1935_S_map.mod
! Writing 392 model components to file: /image_prod/ug002_uva//J0508-1935_S_map.mod
wobs   /image_prod/ug002_uva//J0508-1935_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0508-1935_S_uvs.fits
wwins  /image_prod/ug002_uva//J0508-1935_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0508-1935_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0717371 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000255141 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.06698 1.06698 2.13397 4.26793 8.53587 17.0717 34.1435 68.2869
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  281.166 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0508-1935_S_dfm.log closed on Wed Mar  4 20:41:57 2020