! Started logfile: /image_prod/ug002_uva//J0508+8432_S_j_dfm.log on Wed Mar  4 20:41:03 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0508+8432_S_j_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0508+8432_S_j_uva.fits
! AN table 1: 8 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.934524 visibilities/baseline/integration-bin.
! Found source: J0508+8432
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 471 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0508+8432_S_j]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.079932Jy  sigma=11.590780
! Fit after  self-cal, rms=0.696406Jy  sigma=7.578944
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=14.58 mas, bpa=-49.1 degrees
! Estimated noise=4.10826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241608 Jy
! Component: 100  -  total flux cleaned = 0.255513 Jy
! Total flux subtracted in 100 components = 0.255513 Jy
! Clean residual min=-0.043433 max=0.040283 Jy/beam
! Clean residual mean=-0.000042 rms=0.012370 Jy/beam
! Combined flux in latest and established models = 0.255513 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.255513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.159624Jy  sigma=1.458676
! Fit after  self-cal, rms=0.159533Jy  sigma=1.458349
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.342 mas, bmaj=13.74 mas, bpa=-48.78 degrees
! Estimated noise=3.20472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00913635 Jy
! Component: 100  -  total flux cleaned = -0.0169883 Jy
! Component: 150  -  total flux cleaned = -0.0182448 Jy
! Component: 200  -  total flux cleaned = -0.0158792 Jy
! Total flux subtracted in 200 components = -0.0158792 Jy
! Clean residual min=-0.027053 max=0.023479 Jy/beam
! Clean residual mean=-0.000037 rms=0.007590 Jy/beam
! Combined flux in latest and established models = 0.239634 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.239634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137182Jy  sigma=1.251986
! Fit after  self-cal, rms=0.136935Jy  sigma=1.251308
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.342 x 13.74 at -48.78 degrees (North through East)
! Clean map  min=-0.027589  max=0.31783 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.03     KP        0.98     LA        0.99     
!   NL        1.11     OV        1.07     SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.59     FD        1.07     KP        1.10     LA        1.03     
!   NL        0.84     OV        1.05     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.02     KP        0.97     LA        1.06     
!   NL        1.02     OV        1.02     SC        1.12     
! 
! 
! Fit before self-cal, rms=0.136935Jy  sigma=1.251308
! Fit after  self-cal, rms=0.089726Jy  sigma=0.887653
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.401 mas, bmaj=13.17 mas, bpa=-47.82 degrees
! Estimated noise=3.15615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108683 Jy
! Component: 100  -  total flux cleaned = 0.0182685 Jy
! Component: 150  -  total flux cleaned = 0.0236127 Jy
! Component: 200  -  total flux cleaned = 0.0270695 Jy
! Total flux subtracted in 200 components = 0.0270695 Jy
! Clean residual min=-0.009740 max=0.008964 Jy/beam
! Clean residual mean=-0.000018 rms=0.002649 Jy/beam
! Combined flux in latest and established models = 0.266703 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.266703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088036Jy  sigma=0.868787
! Fit after  self-cal, rms=0.088338Jy  sigma=0.865976
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088338Jy  sigma=0.865976
! Fit after  self-cal, rms=0.087774Jy  sigma=0.862143
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.422 mas, bmaj=13.06 mas, bpa=-47.61 degrees
! Estimated noise=3.15358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00628351 Jy
! Component: 100  -  total flux cleaned = 0.00952757 Jy
! Component: 150  -  total flux cleaned = 0.0110346 Jy
! Component: 200  -  total flux cleaned = 0.0120975 Jy
! Total flux subtracted in 200 components = 0.0120975 Jy
! Clean residual min=-0.008751 max=0.007303 Jy/beam
! Clean residual mean=-0.000015 rms=0.002148 Jy/beam
! Combined flux in latest and established models = 0.278801 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.278801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087264Jy  sigma=0.856303
! Fit after  self-cal, rms=0.087257Jy  sigma=0.856258
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558457 Jy
! Component: 100  -  total flux cleaned = 0.00100391 Jy
! Component: 150  -  total flux cleaned = 0.00134594 Jy
! Component: 200  -  total flux cleaned = 0.00160633 Jy
! Total flux subtracted in 200 components = 0.00160633 Jy
! Clean residual min=-0.008601 max=0.007117 Jy/beam
! Clean residual mean=-0.000014 rms=0.002076 Jy/beam
! Combined flux in latest and established models = 0.280407 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.280407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087127Jy  sigma=0.855186
! Fit after  self-cal, rms=0.087130Jy  sigma=0.855171
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087130Jy  sigma=0.855171
! Fit after  self-cal, rms=0.087080Jy  sigma=0.853523
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.434 mas, bmaj=12.99 mas, bpa=-47.46 degrees
! Estimated noise=3.1588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037762 Jy
! Component: 100  -  total flux cleaned = 0.00469688 Jy
! Component: 150  -  total flux cleaned = 0.00523072 Jy
! Component: 200  -  total flux cleaned = 0.00544078 Jy
! Total flux subtracted in 200 components = 0.00544078 Jy
! Clean residual min=-0.008027 max=0.006760 Jy/beam
! Clean residual mean=-0.000013 rms=0.001826 Jy/beam
! Combined flux in latest and established models = 0.285848 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 65 components and 0.285848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086888Jy  sigma=0.851460
! Fit after  self-cal, rms=0.086893Jy  sigma=0.851436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157373 Jy
! Component: 100  -  total flux cleaned = 0.000256175 Jy
! Component: 150  -  total flux cleaned = 0.000352237 Jy
! Component: 200  -  total flux cleaned = 0.000395754 Jy
! Total flux subtracted in 200 components = 0.000395754 Jy
! Clean residual min=-0.007809 max=0.006619 Jy/beam
! Clean residual mean=-0.000012 rms=0.001782 Jy/beam
! Combined flux in latest and established models = 0.286243 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.286243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086834Jy  sigma=0.850981
! Fit after  self-cal, rms=0.086834Jy  sigma=0.850966
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086834Jy  sigma=0.850966
! Fit after  self-cal, rms=0.086795Jy  sigma=0.850186
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.145 mas, bmaj=12.99 mas, bpa=-39.5 degrees
! Estimated noise=3.34714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219412 Jy
! Component: 100  -  total flux cleaned = 0.00249076 Jy
! Component: 150  -  total flux cleaned = 0.00260419 Jy
! Component: 200  -  total flux cleaned = 0.00270429 Jy
! Total flux subtracted in 200 components = 0.00270429 Jy
! Clean residual min=-0.006604 max=0.006065 Jy/beam
! Clean residual mean=-0.000017 rms=0.001901 Jy/beam
! Combined flux in latest and established models = 0.288948 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.288948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086729Jy  sigma=0.849133
! Fit after  self-cal, rms=0.086719Jy  sigma=0.849118
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.44862e-05 Jy
! Component: 100  -  total flux cleaned = -9.38892e-05 Jy
! Component: 150  -  total flux cleaned = -5.46603e-05 Jy
! Component: 200  -  total flux cleaned = -5.29446e-05 Jy
! Total flux subtracted in 200 components = -5.29446e-05 Jy
! Clean residual min=-0.006405 max=0.005870 Jy/beam
! Clean residual mean=-0.000016 rms=0.001843 Jy/beam
! Combined flux in latest and established models = 0.288895 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.288895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086699Jy  sigma=0.848906
! Fit after  self-cal, rms=0.086695Jy  sigma=0.848903
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.44 mas, bmaj=12.95 mas, bpa=-47.36 degrees
! Estimated noise=3.16063 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.44 x 12.95 at -47.36 degrees (North through East)
! Clean map  min=-0.01374  max=0.31161 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.86 mas, bmaj=13.71 mas, bpa=-47.77 degrees
! Estimated noise=4.10413 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241243 Jy
! Component: 100  -  total flux cleaned = 0.280606 Jy
! Component: 150  -  total flux cleaned = 0.274155 Jy
! Component: 200  -  total flux cleaned = 0.267644 Jy
! Total flux subtracted in 200 components = 0.267644 Jy
! Clean residual min=-0.015442 max=0.012795 Jy/beam
! Clean residual mean=-0.000025 rms=0.004503 Jy/beam
! Combined flux in latest and established models = 0.267644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.267644 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.44 mas, bmaj=12.95 mas, bpa=-47.36 degrees
! Estimated noise=3.16063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.46282e-05 Jy
! Component: 100  -  total flux cleaned = 0.00162296 Jy
! Component: 150  -  total flux cleaned = 0.0036722 Jy
! Component: 200  -  total flux cleaned = 0.00590882 Jy
! Total flux subtracted in 200 components = 0.00590882 Jy
! Clean residual min=-0.010334 max=0.009022 Jy/beam
! Clean residual mean=-0.000016 rms=0.002924 Jy/beam
! Combined flux in latest and established models = 0.273553 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 0.273553 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.145 mas, bmaj=12.99 mas, bpa=-39.5 degrees
! Estimated noise=3.34714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369706 Jy
! Component: 100  -  total flux cleaned = 0.00445896 Jy
! Component: 150  -  total flux cleaned = 0.0051156 Jy
! Component: 200  -  total flux cleaned = 0.00567847 Jy
! Total flux subtracted in 200 components = 0.00567847 Jy
! Clean residual min=-0.008352 max=0.008055 Jy/beam
! Clean residual mean=-0.000028 rms=0.002574 Jy/beam
! Combined flux in latest and established models = 0.279232 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491608 Jy
! Component: 100  -  total flux cleaned = 0.000922604 Jy
! Component: 150  -  total flux cleaned = 0.0013114 Jy
! Component: 200  -  total flux cleaned = 0.00167208 Jy
! Total flux subtracted in 200 components = 0.00167208 Jy
! Clean residual min=-0.007667 max=0.007561 Jy/beam
! Clean residual mean=-0.000027 rms=0.002380 Jy/beam
! Combined flux in latest and established models = 0.280904 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 80 components and 0.280904 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.44 mas, bmaj=12.95 mas, bpa=-47.36 degrees
! Estimated noise=3.16063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103461 Jy
! Component: 100  -  total flux cleaned = 0.000889423 Jy
! Component: 150  -  total flux cleaned = 0.000782701 Jy
! Component: 200  -  total flux cleaned = 0.000783093 Jy
! Total flux subtracted in 200 components = 0.000783093 Jy
! Clean residual min=-0.007964 max=0.007418 Jy/beam
! Clean residual mean=-0.000018 rms=0.002115 Jy/beam
! Combined flux in latest and established models = 0.281687 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 0.281687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087326Jy  sigma=0.855450
! Fit after  self-cal, rms=0.087322Jy  sigma=0.855342
wmodel J0508+8432_S_j_map.mod
! Writing 98 model components to file: J0508+8432_S_j_map.mod
wobs   J0508+8432_S_j_uvs.fits
! Writing UV FITS file: J0508+8432_S_j_uvs.fits
wwins  J0508+8432_S_j_map.win
! wwins: Wrote 1 windows to J0508+8432_S_j_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000998057 Jy
! Component: 100  -  total flux cleaned = -0.00135249 Jy
! Component: 150  -  total flux cleaned = -0.00198759 Jy
! Component: 200  -  total flux cleaned = -0.0023809 Jy
! Component: 250  -  total flux cleaned = -0.00255881 Jy
! Component: 300  -  total flux cleaned = -0.00255978 Jy
! Component: 350  -  total flux cleaned = -0.0025573 Jy
! Component: 400  -  total flux cleaned = -0.00233731 Jy
! Component: 450  -  total flux cleaned = -0.00199486 Jy
! Component: 500  -  total flux cleaned = -0.00166803 Jy
! Component: 550  -  total flux cleaned = -0.00148041 Jy
! Component: 600  -  total flux cleaned = -0.0014213 Jy
! Component: 650  -  total flux cleaned = -0.0013653 Jy
! Component: 700  -  total flux cleaned = -0.0012559 Jy
! Component: 750  -  total flux cleaned = -0.00114948 Jy
! Component: 800  -  total flux cleaned = -0.00141032 Jy
! Component: 850  -  total flux cleaned = -0.00161467 Jy
! Component: 900  -  total flux cleaned = -0.00176617 Jy
! Component: 950  -  total flux cleaned = -0.00206445 Jy
! Component: 1000  -  total flux cleaned = -0.00226078 Jy
! Component: 1050  -  total flux cleaned = -0.00250429 Jy
! Component: 1100  -  total flux cleaned = -0.00274555 Jy
! Component: 1150  -  total flux cleaned = -0.00298586 Jy
! Component: 1200  -  total flux cleaned = -0.00312911 Jy
! Component: 1250  -  total flux cleaned = -0.00341427 Jy
! Component: 1300  -  total flux cleaned = -0.0036511 Jy
! Component: 1350  -  total flux cleaned = -0.00393462 Jy
! Component: 1400  -  total flux cleaned = -0.00421797 Jy
! Component: 1450  -  total flux cleaned = -0.00436029 Jy
! Component: 1500  -  total flux cleaned = -0.00455092 Jy
! Component: 1550  -  total flux cleaned = -0.00479103 Jy
! Component: 1600  -  total flux cleaned = -0.00503233 Jy
! Component: 1650  -  total flux cleaned = -0.0052264 Jy
! Component: 1700  -  total flux cleaned = -0.00542202 Jy
! Component: 1750  -  total flux cleaned = -0.00566738 Jy
! Component: 1800  -  total flux cleaned = -0.00586583 Jy
! Component: 1850  -  total flux cleaned = -0.00611452 Jy
! Component: 1900  -  total flux cleaned = -0.00631562 Jy
! Component: 1950  -  total flux cleaned = -0.00646769 Jy
! Component: 2000  -  total flux cleaned = -0.00662099 Jy
! Component: 2050  -  total flux cleaned = -0.0067242 Jy
! Component: 2100  -  total flux cleaned = -0.00688017 Jy
! Component: 2150  -  total flux cleaned = -0.0070386 Jy
! Component: 2200  -  total flux cleaned = -0.00709254 Jy
! Component: 2250  -  total flux cleaned = -0.00720076 Jy
! Component: 2300  -  total flux cleaned = -0.00736409 Jy
! Component: 2350  -  total flux cleaned = -0.00747452 Jy
! Component: 2400  -  total flux cleaned = -0.00769869 Jy
! Component: 2450  -  total flux cleaned = -0.00787072 Jy
! Component: 2500  -  total flux cleaned = -0.00804467 Jy
! Component: 2550  -  total flux cleaned = -0.00828165 Jy
! Component: 2600  -  total flux cleaned = -0.00846457 Jy
! Component: 2650  -  total flux cleaned = -0.00865151 Jy
! Component: 2700  -  total flux cleaned = -0.00877986 Jy
! Component: 2750  -  total flux cleaned = -0.00891158 Jy
! Component: 2800  -  total flux cleaned = -0.00904841 Jy
! Component: 2850  -  total flux cleaned = -0.00918945 Jy
! Component: 2900  -  total flux cleaned = -0.00933479 Jy
! Component: 2950  -  total flux cleaned = -0.00941042 Jy
! Component: 3000  -  total flux cleaned = -0.00948691 Jy
! Component: 3050  -  total flux cleaned = -0.00956537 Jy
! Component: 3100  -  total flux cleaned = -0.00964594 Jy
! Component: 3150  -  total flux cleaned = -0.00972905 Jy
! Component: 3200  -  total flux cleaned = -0.00973148 Jy
! Component: 3250  -  total flux cleaned = -0.00973045 Jy
! Component: 3300  -  total flux cleaned = -0.00982463 Jy
! Component: 3350  -  total flux cleaned = -0.00972762 Jy
! Component: 3400  -  total flux cleaned = -0.00982511 Jy
! Component: 3450  -  total flux cleaned = -0.00992886 Jy
! Component: 3500  -  total flux cleaned = -0.00992902 Jy
! Component: 3550  -  total flux cleaned = -0.00992928 Jy
! Component: 3600  -  total flux cleaned = -0.0100427 Jy
! Component: 3650  -  total flux cleaned = -0.0100437 Jy
! Component: 3700  -  total flux cleaned = -0.0100431 Jy
! Component: 3750  -  total flux cleaned = -0.00991825 Jy
! Component: 3800  -  total flux cleaned = -0.00978958 Jy
! Component: 3850  -  total flux cleaned = -0.0093841 Jy
! Component: 3900  -  total flux cleaned = -0.00910347 Jy
! Component: 3950  -  total flux cleaned = -0.00881279 Jy
! Component: 4000  -  total flux cleaned = -0.00866039 Jy
! Component: 4050  -  total flux cleaned = -0.00834635 Jy
! Total flux subtracted in 4096 components = -0.00818277 Jy
! Clean residual min=-0.009746 max=0.009079 Jy/beam
! Clean residual mean=0.000006 rms=0.002272 Jy/beam
! Combined flux in latest and established models = 0.273504 Jy
keep
! Adding 175 model components to the UV plane model.
! The established model now contains 273 components and 0.273504 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0508+8432_S_j_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.44 x 12.95 at -47.36 degrees (North through East)
! Clean map  min=-0.016477  max=0.30798 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0508+8432_S_j_map.fits
wmodel /image_prod/ug002_uva//J0508+8432_S_j_map.mod
! Writing 273 model components to file: /image_prod/ug002_uva//J0508+8432_S_j_map.mod
wobs   /image_prod/ug002_uva//J0508+8432_S_j_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0508+8432_S_j_uvs.fits
wwins  /image_prod/ug002_uva//J0508+8432_S_j_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0508+8432_S_j_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.307985 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00220527 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.14809 2.14809 4.29619 8.59237 17.1847 34.3695 68.739
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0066 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.307 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  139.658 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0508+8432_S_j_dfm.log closed on Wed Mar  4 20:41:06 2020