! Started logfile: /image_prod/ug002_uva//J0505-2930_X_a_dfm.log on Wed Mar  4 20:39:42 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0505-2930_X_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0505-2930_X_a_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.871296 visibilities/baseline/integration-bin.
! Found source: J0505-2930
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22584 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0505-2930_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.088697Jy  sigma=7.009811
! Fit after  self-cal, rms=0.579860Jy  sigma=3.587988
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5541 mas, bmaj=1.632 mas, bpa=-8.653 degrees
! Estimated noise=1.74191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325302 Jy
! Component: 100  -  total flux cleaned = 0.407224 Jy
! Total flux subtracted in 100 components = 0.407224 Jy
! Clean residual min=-0.021596 max=0.037586 Jy/beam
! Clean residual mean=-0.000006 rms=0.005111 Jy/beam
! Combined flux in latest and established models = 0.407224 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.407224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119577Jy  sigma=0.768752
! Fit after  self-cal, rms=0.119563Jy  sigma=0.768652
! Inverting map 
! Added new window around map position (-7.4, -8.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0409683 Jy
! Component: 100  -  total flux cleaned = 0.0642619 Jy
! Total flux subtracted in 100 components = 0.0642619 Jy
! Clean residual min=-0.017395 max=0.029584 Jy/beam
! Clean residual mean=-0.000002 rms=0.003991 Jy/beam
! Combined flux in latest and established models = 0.471486 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.471486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105067Jy  sigma=0.635249
! Fit after  self-cal, rms=0.104166Jy  sigma=0.628278
! Inverting map 
! Added new window around map position (1.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237359 Jy
! Component: 100  -  total flux cleaned = 0.0330675 Jy
! Total flux subtracted in 100 components = 0.0330675 Jy
! Clean residual min=-0.015660 max=0.022561 Jy/beam
! Clean residual mean=-0.000000 rms=0.003462 Jy/beam
! Combined flux in latest and established models = 0.504553 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.504553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099069Jy  sigma=0.588392
! Fit after  self-cal, rms=0.098643Jy  sigma=0.584037
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7304 mas, bmaj=1.97 mas, bpa=-8.023 degrees
! Estimated noise=0.748693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166938 Jy
! Component: 100  -  total flux cleaned = 0.0267599 Jy
! Component: 150  -  total flux cleaned = 0.0336538 Jy
! Component: 200  -  total flux cleaned = 0.037972 Jy
! Total flux subtracted in 200 components = 0.037972 Jy
! Clean residual min=-0.014796 max=0.018197 Jy/beam
! Clean residual mean=0.000012 rms=0.003854 Jy/beam
! Combined flux in latest and established models = 0.542525 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.542525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096484Jy  sigma=0.556543
! Fit after  self-cal, rms=0.096449Jy  sigma=0.555249
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7304 x 1.97 at -8.023 degrees (North through East)
! Clean map  min=-0.013735  max=0.42032 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        1.19     KP        1.01     
!   LA        0.94     MK        0.97     NL        1.09     OV        0.90     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.20     KP        1.02     
!   LA        0.94     MK        0.98     NL        1.08     OV        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.19     KP        1.02     
!   LA        0.93     MK        0.98     NL        1.09     OV        0.91     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.16     KP        1.03     
!   LA        0.94     MK        0.98     NL        1.07     OV        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.16     KP        1.02     
!   LA        0.94     MK        1.00     NL        1.08     OV        0.91     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.18     KP        1.02     
!   LA        0.94     MK        0.99     NL        1.08     OV        0.89     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.19     KP        1.01     
!   LA        0.94     MK        1.02     NL        1.08     OV        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.18     KP        1.00     
!   LA        0.94     MK        1.00     NL        1.08     OV        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.19     KP        1.04     
!   LA        0.93     MK        0.99     NL        1.08     OV        0.89     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.20     KP        1.03     
!   LA        0.93     MK        0.98     NL        1.08     OV        0.90     
!   SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.22     KP        1.03     
!   LA        0.95     MK        0.99     NL        1.06     OV        0.90     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.22     KP        1.03     
!   LA        0.93     MK        0.97     NL        1.08     OV        0.92     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.096449Jy  sigma=0.555249
! Fit after  self-cal, rms=0.091985Jy  sigma=0.488250
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7322 mas, bmaj=1.957 mas, bpa=-7.74 degrees
! Estimated noise=0.753247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00669042 Jy
! Component: 100  -  total flux cleaned = -0.00823619 Jy
! Component: 150  -  total flux cleaned = -0.00940158 Jy
! Component: 200  -  total flux cleaned = -0.010465 Jy
! Total flux subtracted in 200 components = -0.010465 Jy
! Clean residual min=-0.010949 max=0.009695 Jy/beam
! Clean residual mean=0.000001 rms=0.002175 Jy/beam
! Combined flux in latest and established models = 0.53206 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.53206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090467Jy  sigma=0.479542
! Fit after  self-cal, rms=0.090338Jy  sigma=0.478571
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090338Jy  sigma=0.478571
! Fit after  self-cal, rms=0.088037Jy  sigma=0.459410
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7308 mas, bmaj=1.957 mas, bpa=-7.752 degrees
! Estimated noise=0.754609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00741809 Jy
! Component: 100  -  total flux cleaned = -0.00814368 Jy
! Component: 150  -  total flux cleaned = -0.00898768 Jy
! Component: 200  -  total flux cleaned = -0.00962951 Jy
! Total flux subtracted in 200 components = -0.00962951 Jy
! Clean residual min=-0.007928 max=0.006134 Jy/beam
! Clean residual mean=-0.000003 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 0.522431 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 0.522431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087031Jy  sigma=0.454139
! Fit after  self-cal, rms=0.086797Jy  sigma=0.453086
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00229184 Jy
! Component: 100  -  total flux cleaned = -0.0030663 Jy
! Component: 150  -  total flux cleaned = -0.00366436 Jy
! Component: 200  -  total flux cleaned = -0.0039795 Jy
! Total flux subtracted in 200 components = -0.0039795 Jy
! Clean residual min=-0.007082 max=0.005897 Jy/beam
! Clean residual mean=-0.000001 rms=0.001432 Jy/beam
! Combined flux in latest and established models = 0.518451 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 47 components and 0.518451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086564Jy  sigma=0.451906
! Fit after  self-cal, rms=0.086495Jy  sigma=0.451721
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086495Jy  sigma=0.451721
! Fit after  self-cal, rms=0.086633Jy  sigma=0.443942
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7301 mas, bmaj=1.955 mas, bpa=-7.73 degrees
! Estimated noise=0.754539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00620361 Jy
! Component: 100  -  total flux cleaned = -0.0074249 Jy
! Component: 150  -  total flux cleaned = -0.0080001 Jy
! Component: 200  -  total flux cleaned = -0.00830533 Jy
! Total flux subtracted in 200 components = -0.00830533 Jy
! Clean residual min=-0.005120 max=0.004305 Jy/beam
! Clean residual mean=-0.000004 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.510146 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 51 components and 0.510146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086004Jy  sigma=0.441004
! Fit after  self-cal, rms=0.085886Jy  sigma=0.440320
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00161569 Jy
! Component: 100  -  total flux cleaned = -0.00198144 Jy
! Component: 150  -  total flux cleaned = -0.0023515 Jy
! Component: 200  -  total flux cleaned = -0.00257575 Jy
! Total flux subtracted in 200 components = -0.00257575 Jy
! Clean residual min=-0.004464 max=0.004119 Jy/beam
! Clean residual mean=-0.000003 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.50757 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.50757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085720Jy  sigma=0.439618
! Fit after  self-cal, rms=0.085684Jy  sigma=0.439511
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085684Jy  sigma=0.439511
! Fit after  self-cal, rms=0.086155Jy  sigma=0.437986
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.044 mas, bmaj=5.181 mas, bpa=-3.36 degrees
! Estimated noise=1.03838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0030007 Jy
! Component: 100  -  total flux cleaned = -0.00372692 Jy
! Component: 150  -  total flux cleaned = -0.00404586 Jy
! Component: 200  -  total flux cleaned = -0.00415154 Jy
! Total flux subtracted in 200 components = -0.00415154 Jy
! Clean residual min=-0.003638 max=0.003555 Jy/beam
! Clean residual mean=-0.000006 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.503419 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 62 components and 0.503419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086000Jy  sigma=0.437574
! Fit after  self-cal, rms=0.085963Jy  sigma=0.437351
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000748246 Jy
! Component: 100  -  total flux cleaned = -0.00106206 Jy
! Component: 150  -  total flux cleaned = -0.00122109 Jy
! Component: 200  -  total flux cleaned = -0.00125462 Jy
! Total flux subtracted in 200 components = -0.00125462 Jy
! Clean residual min=-0.003251 max=0.003346 Jy/beam
! Clean residual mean=-0.000004 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.502164 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 66 components and 0.502164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085918Jy  sigma=0.437402
! Fit after  self-cal, rms=0.085894Jy  sigma=0.437306
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7293 mas, bmaj=1.952 mas, bpa=-7.699 degrees
! Estimated noise=0.753426 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7293 x 1.952 at -7.699 degrees (North through East)
! Clean map  min=-0.0033523  max=0.43189 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5516 mas, bmaj=1.61 mas, bpa=-8.218 degrees
! Estimated noise=1.76248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.329048 Jy
! Component: 100  -  total flux cleaned = 0.412823 Jy
! Component: 150  -  total flux cleaned = 0.450809 Jy
! Component: 200  -  total flux cleaned = 0.469759 Jy
! Total flux subtracted in 200 components = 0.469759 Jy
! Clean residual min=-0.006668 max=0.009049 Jy/beam
! Clean residual mean=-0.000004 rms=0.001551 Jy/beam
! Combined flux in latest and established models = 0.469759 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.469759 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7293 mas, bmaj=1.952 mas, bpa=-7.699 degrees
! Estimated noise=0.753426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120968 Jy
! Component: 100  -  total flux cleaned = 0.0188854 Jy
! Component: 150  -  total flux cleaned = 0.0233346 Jy
! Component: 200  -  total flux cleaned = 0.0261634 Jy
! Total flux subtracted in 200 components = 0.0261634 Jy
! Clean residual min=-0.003599 max=0.003875 Jy/beam
! Clean residual mean=-0.000002 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.495922 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 0.495922 Jy
! Inverting map 
! Added new window around map position (8, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220832 Jy
! Component: 100  -  total flux cleaned = 0.00285964 Jy
! Component: 150  -  total flux cleaned = 0.00368061 Jy
! Component: 200  -  total flux cleaned = 0.0043329 Jy
! Total flux subtracted in 200 components = 0.0043329 Jy
! Clean residual min=-0.003051 max=0.003208 Jy/beam
! Clean residual mean=-0.000002 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.500255 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.500255 Jy
! Inverting map 
! Added new window around map position (2.6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183106 Jy
! Component: 100  -  total flux cleaned = 0.00267016 Jy
! Component: 150  -  total flux cleaned = 0.00298159 Jy
! Component: 200  -  total flux cleaned = 0.00315278 Jy
! Total flux subtracted in 200 components = 0.00315278 Jy
! Clean residual min=-0.002877 max=0.002981 Jy/beam
! Clean residual mean=-0.000003 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.503408 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 62 components and 0.503408 Jy
! Inverting map 
! Added new window around map position (-0.8, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027766 Jy
! Component: 100  -  total flux cleaned = 0.00322679 Jy
! Component: 150  -  total flux cleaned = 0.00365809 Jy
! Component: 200  -  total flux cleaned = 0.0039335 Jy
! Total flux subtracted in 200 components = 0.0039335 Jy
! Clean residual min=-0.002551 max=0.002338 Jy/beam
! Clean residual mean=-0.000004 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.507342 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.507342 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.044 mas, bmaj=5.181 mas, bpa=-3.36 degrees
! Estimated noise=1.03838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394856 Jy
! Component: 100  -  total flux cleaned = 0.000575259 Jy
! Component: 150  -  total flux cleaned = 0.000652938 Jy
! Component: 200  -  total flux cleaned = 0.000618725 Jy
! Total flux subtracted in 200 components = 0.000618725 Jy
! Clean residual min=-0.002992 max=0.002723 Jy/beam
! Clean residual mean=-0.000011 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.50796 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.51808e-05 Jy
! Component: 100  -  total flux cleaned = -0.000214242 Jy
! Component: 150  -  total flux cleaned = -0.000350671 Jy
! Component: 200  -  total flux cleaned = -0.000427114 Jy
! Total flux subtracted in 200 components = -0.000427114 Jy
! Clean residual min=-0.002839 max=0.002539 Jy/beam
! Clean residual mean=-0.000010 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.507533 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 92 components and 0.507533 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7293 mas, bmaj=1.952 mas, bpa=-7.699 degrees
! Estimated noise=0.753426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.37075e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122136 Jy
! Component: 150  -  total flux cleaned = 0.000256267 Jy
! Component: 200  -  total flux cleaned = 0.00029864 Jy
! Total flux subtracted in 200 components = 0.00029864 Jy
! Clean residual min=-0.002423 max=0.001961 Jy/beam
! Clean residual mean=-0.000004 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.507832 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.507832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085289Jy  sigma=0.433825
! Fit after  self-cal, rms=0.085243Jy  sigma=0.433549
wmodel J0505-2930_X_a_map.mod
! Writing 102 model components to file: J0505-2930_X_a_map.mod
wobs   J0505-2930_X_a_uvs.fits
! Writing UV FITS file: J0505-2930_X_a_uvs.fits
wwins  J0505-2930_X_a_map.win
! wwins: Wrote 6 windows to J0505-2930_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000909384 Jy
! Component: 100  -  total flux cleaned = -0.00126996 Jy
! Component: 150  -  total flux cleaned = -0.00161313 Jy
! Component: 200  -  total flux cleaned = -0.0017791 Jy
! Component: 250  -  total flux cleaned = -0.0019389 Jy
! Component: 300  -  total flux cleaned = -0.0020322 Jy
! Component: 350  -  total flux cleaned = -0.00212295 Jy
! Component: 400  -  total flux cleaned = -0.0021823 Jy
! Component: 450  -  total flux cleaned = -0.00226798 Jy
! Component: 500  -  total flux cleaned = -0.00232431 Jy
! Component: 550  -  total flux cleaned = -0.00235147 Jy
! Component: 600  -  total flux cleaned = -0.00243078 Jy
! Component: 650  -  total flux cleaned = -0.00248256 Jy
! Component: 700  -  total flux cleaned = -0.00250821 Jy
! Component: 750  -  total flux cleaned = -0.00255885 Jy
! Component: 800  -  total flux cleaned = -0.00268211 Jy
! Component: 850  -  total flux cleaned = -0.00273079 Jy
! Component: 900  -  total flux cleaned = -0.00287249 Jy
! Component: 950  -  total flux cleaned = -0.00291905 Jy
! Component: 1000  -  total flux cleaned = -0.00303309 Jy
! Component: 1050  -  total flux cleaned = -0.00310053 Jy
! Component: 1100  -  total flux cleaned = -0.00325536 Jy
! Component: 1150  -  total flux cleaned = -0.00345082 Jy
! Component: 1200  -  total flux cleaned = -0.00349358 Jy
! Component: 1250  -  total flux cleaned = -0.00372683 Jy
! Component: 1300  -  total flux cleaned = -0.00383137 Jy
! Component: 1350  -  total flux cleaned = -0.00395501 Jy
! Component: 1400  -  total flux cleaned = -0.00413737 Jy
! Component: 1450  -  total flux cleaned = -0.00429769 Jy
! Component: 1500  -  total flux cleaned = -0.00437677 Jy
! Component: 1550  -  total flux cleaned = -0.00449415 Jy
! Component: 1600  -  total flux cleaned = -0.0046677 Jy
! Component: 1650  -  total flux cleaned = -0.00470576 Jy
! Component: 1700  -  total flux cleaned = -0.00487492 Jy
! Component: 1750  -  total flux cleaned = -0.00485668 Jy
! Component: 1800  -  total flux cleaned = -0.00502174 Jy
! Component: 1850  -  total flux cleaned = -0.00514838 Jy
! Component: 1900  -  total flux cleaned = -0.00518409 Jy
! Component: 1950  -  total flux cleaned = -0.00532546 Jy
! Component: 2000  -  total flux cleaned = -0.00539546 Jy
! Component: 2050  -  total flux cleaned = -0.00543001 Jy
! Component: 2100  -  total flux cleaned = -0.00551546 Jy
! Component: 2150  -  total flux cleaned = -0.00554937 Jy
! Component: 2200  -  total flux cleaned = -0.00563262 Jy
! Component: 2250  -  total flux cleaned = -0.0056985 Jy
! Component: 2300  -  total flux cleaned = -0.00576391 Jy
! Component: 2350  -  total flux cleaned = -0.00582887 Jy
! Component: 2400  -  total flux cleaned = -0.00586064 Jy
! Component: 2450  -  total flux cleaned = -0.00595563 Jy
! Component: 2500  -  total flux cleaned = -0.00597143 Jy
! Component: 2550  -  total flux cleaned = -0.00601814 Jy
! Component: 2600  -  total flux cleaned = -0.0061261 Jy
! Component: 2650  -  total flux cleaned = -0.00618728 Jy
! Component: 2700  -  total flux cleaned = -0.00626276 Jy
! Component: 2750  -  total flux cleaned = -0.00632284 Jy
! Component: 2800  -  total flux cleaned = -0.00636757 Jy
! Component: 2850  -  total flux cleaned = -0.00645573 Jy
! Component: 2900  -  total flux cleaned = -0.00644096 Jy
! Component: 2950  -  total flux cleaned = -0.00649881 Jy
! Component: 3000  -  total flux cleaned = -0.00659893 Jy
! Component: 3050  -  total flux cleaned = -0.00658462 Jy
! Component: 3100  -  total flux cleaned = -0.00664096 Jy
! Component: 3150  -  total flux cleaned = -0.00665497 Jy
! Component: 3200  -  total flux cleaned = -0.00669666 Jy
! Component: 3250  -  total flux cleaned = -0.00677925 Jy
! Component: 3300  -  total flux cleaned = -0.00680678 Jy
! Component: 3350  -  total flux cleaned = -0.0068745 Jy
! Component: 3400  -  total flux cleaned = -0.00687453 Jy
! Component: 3450  -  total flux cleaned = -0.00691441 Jy
! Component: 3500  -  total flux cleaned = -0.00694089 Jy
! Component: 3550  -  total flux cleaned = -0.00699358 Jy
! Component: 3600  -  total flux cleaned = -0.00701984 Jy
! Component: 3650  -  total flux cleaned = -0.00703266 Jy
! Component: 3700  -  total flux cleaned = -0.00708414 Jy
! Component: 3750  -  total flux cleaned = -0.00713521 Jy
! Component: 3800  -  total flux cleaned = -0.00713519 Jy
! Component: 3850  -  total flux cleaned = -0.00713513 Jy
! Component: 3900  -  total flux cleaned = -0.00718539 Jy
! Component: 3950  -  total flux cleaned = -0.00722275 Jy
! Component: 4000  -  total flux cleaned = -0.00722277 Jy
! Component: 4050  -  total flux cleaned = -0.0072718 Jy
! Total flux subtracted in 4096 components = -0.00728402 Jy
! Clean residual min=-0.000680 max=0.000823 Jy/beam
! Clean residual mean=-0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.500548 Jy
keep
! Adding 323 model components to the UV plane model.
! The established model now contains 425 components and 0.500548 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0505-2930_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7293 x 1.952 at -7.699 degrees (North through East)
! Clean map  min=-0.0020794  max=0.43492 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0505-2930_X_a_map.fits
wmodel /image_prod/ug002_uva//J0505-2930_X_a_map.mod
! Writing 425 model components to file: /image_prod/ug002_uva//J0505-2930_X_a_map.mod
wobs   /image_prod/ug002_uva//J0505-2930_X_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0505-2930_X_a_uvs.fits
wwins  /image_prod/ug002_uva//J0505-2930_X_a_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0505-2930_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.434918 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216048 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.149027 0.149027 0.298054 0.596107 1.19221 2.38443 4.76886 9.53771 19.0754 38.1509 76.3017
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.434 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2013.06 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0505-2930_X_a_dfm.log closed on Wed Mar  4 20:39:47 2020