! Started logfile: /image_prod/ug002_uva//J0505-2930_S_b_dfm.log on Wed Mar  4 20:39:38 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0505-2930_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0505-2930_S_b_uva.fits
! AN table 1: 55 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.885859 visibilities/baseline/integration-bin.
! Found source: J0505-2930
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5262 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0505-2930_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023299Jy  sigma=6.518851
! Fit after  self-cal, rms=0.737432Jy  sigma=4.548485
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=13.05 mas, bpa=7.915 degrees
! Estimated noise=2.42976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219811 Jy
! Component: 100  -  total flux cleaned = 0.26851 Jy
! Total flux subtracted in 100 components = 0.26851 Jy
! Clean residual min=-0.020845 max=0.027902 Jy/beam
! Clean residual mean=-0.000036 rms=0.005782 Jy/beam
! Combined flux in latest and established models = 0.26851 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.26851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115356Jy  sigma=0.618147
! Fit after  self-cal, rms=0.115285Jy  sigma=0.618024
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.053 mas, bmaj=14.68 mas, bpa=7.582 degrees
! Estimated noise=1.59341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022091 Jy
! Component: 100  -  total flux cleaned = 0.023122 Jy
! Component: 150  -  total flux cleaned = 0.0239745 Jy
! Component: 200  -  total flux cleaned = 0.0243522 Jy
! Total flux subtracted in 200 components = 0.0243522 Jy
! Clean residual min=-0.012579 max=0.018756 Jy/beam
! Clean residual mean=-0.000014 rms=0.004324 Jy/beam
! Combined flux in latest and established models = 0.292862 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.292862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109549Jy  sigma=0.580253
! Fit after  self-cal, rms=0.109578Jy  sigma=0.580167
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.053 x 14.68 at 7.582 degrees (North through East)
! Clean map  min=-0.011909  max=0.2624 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.81     FD        0.95     HN        1.10     KP        0.95     
!   LA        1.00     NL        0.96     OV        0.93     PT        0.99     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.45     FD        0.96     HN        1.11     KP        0.96     
!   LA        1.00     NL        0.91     OV        0.98     PT        0.98     
!   SC        0.81     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.92     FD        0.98     HN        1.17     KP        0.94     
!   LA        0.98     NL        0.92     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.109578Jy  sigma=0.580167
! Fit after  self-cal, rms=0.141724Jy  sigma=0.489879
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.007 mas, bmaj=14.64 mas, bpa=7.997 degrees
! Estimated noise=1.59588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000619865 Jy
! Component: 100  -  total flux cleaned = -0.000634137 Jy
! Component: 150  -  total flux cleaned = -0.000633332 Jy
! Component: 200  -  total flux cleaned = -0.000824249 Jy
! Total flux subtracted in 200 components = -0.000824249 Jy
! Clean residual min=-0.005036 max=0.004635 Jy/beam
! Clean residual mean=-0.000008 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.292038 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 35 components and 0.292038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.140874Jy  sigma=0.478440
! Fit after  self-cal, rms=0.141238Jy  sigma=0.478129
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141238Jy  sigma=0.478129
! Fit after  self-cal, rms=0.143331Jy  sigma=0.473249
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.004 mas, bmaj=14.66 mas, bpa=7.868 degrees
! Estimated noise=1.58475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000822823 Jy
! Component: 100  -  total flux cleaned = -0.00094415 Jy
! Component: 150  -  total flux cleaned = -0.00104986 Jy
! Component: 200  -  total flux cleaned = -0.0011454 Jy
! Total flux subtracted in 200 components = -0.0011454 Jy
! Clean residual min=-0.003527 max=0.003399 Jy/beam
! Clean residual mean=0.000001 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.290892 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 0.290892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143288Jy  sigma=0.472657
! Fit after  self-cal, rms=0.143276Jy  sigma=0.472629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180767 Jy
! Component: 100  -  total flux cleaned = -0.000141225 Jy
! Component: 150  -  total flux cleaned = -0.000141404 Jy
! Component: 200  -  total flux cleaned = -0.0001746 Jy
! Total flux subtracted in 200 components = -0.0001746 Jy
! Clean residual min=-0.003444 max=0.003405 Jy/beam
! Clean residual mean=0.000001 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.290718 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.290718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143258Jy  sigma=0.472382
! Fit after  self-cal, rms=0.143258Jy  sigma=0.472367
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143258Jy  sigma=0.472367
! Fit after  self-cal, rms=0.145047Jy  sigma=0.472038
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.007 mas, bmaj=14.67 mas, bpa=7.821 degrees
! Estimated noise=1.58233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000357078 Jy
! Component: 100  -  total flux cleaned = -0.000326071 Jy
! Component: 150  -  total flux cleaned = -0.000299642 Jy
! Component: 200  -  total flux cleaned = -0.000299418 Jy
! Total flux subtracted in 200 components = -0.000299418 Jy
! Clean residual min=-0.003197 max=0.003279 Jy/beam
! Clean residual mean=0.000005 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.290418 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 59 components and 0.290418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145028Jy  sigma=0.471924
! Fit after  self-cal, rms=0.145037Jy  sigma=0.471907
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.20306e-05 Jy
! Component: 100  -  total flux cleaned = -4.64292e-05 Jy
! Component: 150  -  total flux cleaned = -6.83601e-05 Jy
! Component: 200  -  total flux cleaned = -6.79542e-05 Jy
! Total flux subtracted in 200 components = -6.79542e-05 Jy
! Clean residual min=-0.003118 max=0.003289 Jy/beam
! Clean residual mean=0.000005 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.29035 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.29035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145025Jy  sigma=0.471830
! Fit after  self-cal, rms=0.145027Jy  sigma=0.471820
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145027Jy  sigma=0.471820
! Fit after  self-cal, rms=0.145322Jy  sigma=0.471809
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.876 mas, bmaj=22.07 mas, bpa=-2.882 degrees
! Estimated noise=1.81161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000501194 Jy
! Component: 100  -  total flux cleaned = -0.000489073 Jy
! Component: 150  -  total flux cleaned = -0.000488497 Jy
! Component: 200  -  total flux cleaned = -0.000497752 Jy
! Total flux subtracted in 200 components = -0.000497752 Jy
! Clean residual min=-0.002963 max=0.003646 Jy/beam
! Clean residual mean=0.000008 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.289853 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 66 components and 0.289853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145321Jy  sigma=0.471793
! Fit after  self-cal, rms=0.145319Jy  sigma=0.471775
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.79115e-07 Jy
! Component: 100  -  total flux cleaned = -1.15962e-05 Jy
! Component: 150  -  total flux cleaned = -2.16955e-05 Jy
! Component: 200  -  total flux cleaned = -3.06136e-05 Jy
! Total flux subtracted in 200 components = -3.06136e-05 Jy
! Clean residual min=-0.002930 max=0.003629 Jy/beam
! Clean residual mean=0.000008 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.289822 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 71 components and 0.289822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145321Jy  sigma=0.471762
! Fit after  self-cal, rms=0.145320Jy  sigma=0.471755
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=14.67 mas, bpa=7.826 degrees
! Estimated noise=1.58102 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.006 x 14.67 at 7.826 degrees (North through East)
! Clean map  min=-0.0028808  max=0.26836 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.267 mas, bmaj=13.13 mas, bpa=8.111 degrees
! Estimated noise=2.41092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218017 Jy
! Component: 100  -  total flux cleaned = 0.265629 Jy
! Component: 150  -  total flux cleaned = 0.277973 Jy
! Component: 200  -  total flux cleaned = 0.283272 Jy
! Total flux subtracted in 200 components = 0.283272 Jy
! Clean residual min=-0.004330 max=0.004759 Jy/beam
! Clean residual mean=-0.000002 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.283272 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.283272 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=14.67 mas, bpa=7.826 degrees
! Estimated noise=1.58102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, 23.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00256874 Jy
! Component: 100  -  total flux cleaned = 0.00256497 Jy
! Component: 150  -  total flux cleaned = 0.00263739 Jy
! Component: 200  -  total flux cleaned = 0.00277292 Jy
! Total flux subtracted in 200 components = 0.00277292 Jy
! Clean residual min=-0.002997 max=0.003819 Jy/beam
! Clean residual mean=0.000004 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.286045 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.286045 Jy
! Inverting map 
! Added new window around map position (-83, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030781 Jy
! Component: 100  -  total flux cleaned = 0.00347285 Jy
! Component: 150  -  total flux cleaned = 0.00347161 Jy
! Component: 200  -  total flux cleaned = 0.00336808 Jy
! Total flux subtracted in 200 components = 0.00336808 Jy
! Clean residual min=-0.002642 max=0.002722 Jy/beam
! Clean residual mean=-0.000004 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.289413 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 50 components and 0.289413 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.876 mas, bmaj=22.07 mas, bpa=-2.882 degrees
! Estimated noise=1.81161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021842 Jy
! Component: 100  -  total flux cleaned = 0.000261128 Jy
! Component: 150  -  total flux cleaned = 0.00022165 Jy
! Component: 200  -  total flux cleaned = 0.000187258 Jy
! Total flux subtracted in 200 components = 0.000187258 Jy
! Clean residual min=-0.002545 max=0.003237 Jy/beam
! Clean residual mean=-0.000004 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.2896 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-111.5, -71.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243065 Jy
! Component: 100  -  total flux cleaned = 0.00194999 Jy
! Component: 150  -  total flux cleaned = 0.00153041 Jy
! Component: 200  -  total flux cleaned = 0.0013196 Jy
! Total flux subtracted in 200 components = 0.0013196 Jy
! Clean residual min=-0.002352 max=0.002126 Jy/beam
! Clean residual mean=0.000002 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.29092 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 95 components and 0.29092 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=14.67 mas, bpa=7.826 degrees
! Estimated noise=1.58102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000557431 Jy
! Component: 100  -  total flux cleaned = -0.000983768 Jy
! Component: 150  -  total flux cleaned = -0.00127041 Jy
! Component: 200  -  total flux cleaned = -0.0014461 Jy
! Total flux subtracted in 200 components = -0.0014461 Jy
! Clean residual min=-0.002508 max=0.002235 Jy/beam
! Clean residual mean=0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.289474 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 128 components and 0.289474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145146Jy  sigma=0.469950
! Fit after  self-cal, rms=0.145144Jy  sigma=0.469812
wmodel J0505-2930_S_b_map.mod
! Writing 128 model components to file: J0505-2930_S_b_map.mod
wobs   J0505-2930_S_b_uvs.fits
! Writing UV FITS file: J0505-2930_S_b_uvs.fits
wwins  J0505-2930_S_b_map.win
! wwins: Wrote 4 windows to J0505-2930_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000627002 Jy
! Component: 100  -  total flux cleaned = -0.000783134 Jy
! Component: 150  -  total flux cleaned = -0.000744998 Jy
! Component: 200  -  total flux cleaned = -0.000780158 Jy
! Component: 250  -  total flux cleaned = -0.000780344 Jy
! Component: 300  -  total flux cleaned = -0.000813393 Jy
! Component: 350  -  total flux cleaned = -0.000812641 Jy
! Component: 400  -  total flux cleaned = -0.000842652 Jy
! Component: 450  -  total flux cleaned = -0.000962985 Jy
! Component: 500  -  total flux cleaned = -0.0011382 Jy
! Component: 550  -  total flux cleaned = -0.00122368 Jy
! Component: 600  -  total flux cleaned = -0.00139014 Jy
! Component: 650  -  total flux cleaned = -0.00147162 Jy
! Component: 700  -  total flux cleaned = -0.00157832 Jy
! Component: 750  -  total flux cleaned = -0.00178552 Jy
! Component: 800  -  total flux cleaned = -0.00188672 Jy
! Component: 850  -  total flux cleaned = -0.00198668 Jy
! Component: 900  -  total flux cleaned = -0.00223092 Jy
! Component: 950  -  total flux cleaned = -0.0023266 Jy
! Component: 1000  -  total flux cleaned = -0.00237406 Jy
! Component: 1050  -  total flux cleaned = -0.00239731 Jy
! Component: 1100  -  total flux cleaned = -0.00242001 Jy
! Component: 1150  -  total flux cleaned = -0.00244218 Jy
! Component: 1200  -  total flux cleaned = -0.00239801 Jy
! Component: 1250  -  total flux cleaned = -0.00239824 Jy
! Component: 1300  -  total flux cleaned = -0.00241961 Jy
! Component: 1350  -  total flux cleaned = -0.00241959 Jy
! Component: 1400  -  total flux cleaned = -0.00241938 Jy
! Component: 1450  -  total flux cleaned = -0.00246052 Jy
! Component: 1500  -  total flux cleaned = -0.00246045 Jy
! Component: 1550  -  total flux cleaned = -0.00252002 Jy
! Component: 1600  -  total flux cleaned = -0.0025202 Jy
! Component: 1650  -  total flux cleaned = -0.00261765 Jy
! Component: 1700  -  total flux cleaned = -0.00265607 Jy
! Component: 1750  -  total flux cleaned = -0.00275099 Jy
! Component: 1800  -  total flux cleaned = -0.00278841 Jy
! Component: 1850  -  total flux cleaned = -0.00286271 Jy
! Component: 1900  -  total flux cleaned = -0.00297272 Jy
! Component: 1950  -  total flux cleaned = -0.00302716 Jy
! Component: 2000  -  total flux cleaned = -0.00309889 Jy
! Component: 2050  -  total flux cleaned = -0.00313434 Jy
! Component: 2100  -  total flux cleaned = -0.00322218 Jy
! Component: 2150  -  total flux cleaned = -0.00325684 Jy
! Component: 2200  -  total flux cleaned = -0.00332571 Jy
! Component: 2250  -  total flux cleaned = -0.00337679 Jy
! Component: 2300  -  total flux cleaned = -0.00339377 Jy
! Component: 2350  -  total flux cleaned = -0.00347722 Jy
! Component: 2400  -  total flux cleaned = -0.00354332 Jy
! Component: 2450  -  total flux cleaned = -0.00355957 Jy
! Component: 2500  -  total flux cleaned = -0.00360838 Jy
! Component: 2550  -  total flux cleaned = -0.00365663 Jy
! Component: 2600  -  total flux cleaned = -0.00370441 Jy
! Component: 2650  -  total flux cleaned = -0.00368866 Jy
! Component: 2700  -  total flux cleaned = -0.00370422 Jy
! Component: 2750  -  total flux cleaned = -0.00368879 Jy
! Component: 2800  -  total flux cleaned = -0.00374998 Jy
! Component: 2850  -  total flux cleaned = -0.00376512 Jy
! Component: 2900  -  total flux cleaned = -0.00378026 Jy
! Component: 2950  -  total flux cleaned = -0.00385479 Jy
! Component: 3000  -  total flux cleaned = -0.00388444 Jy
! Component: 3050  -  total flux cleaned = -0.0038991 Jy
! Component: 3100  -  total flux cleaned = -0.00392829 Jy
! Component: 3150  -  total flux cleaned = -0.00389956 Jy
! Component: 3200  -  total flux cleaned = -0.00395696 Jy
! Component: 3250  -  total flux cleaned = -0.00395689 Jy
! Component: 3300  -  total flux cleaned = -0.00394265 Jy
! Component: 3350  -  total flux cleaned = -0.00398481 Jy
! Component: 3400  -  total flux cleaned = -0.00397087 Jy
! Component: 3450  -  total flux cleaned = -0.00395702 Jy
! Component: 3500  -  total flux cleaned = -0.0040124 Jy
! Component: 3550  -  total flux cleaned = -0.0039848 Jy
! Component: 3600  -  total flux cleaned = -0.00402578 Jy
! Component: 3650  -  total flux cleaned = -0.00398505 Jy
! Component: 3700  -  total flux cleaned = -0.00402559 Jy
! Component: 3750  -  total flux cleaned = -0.00403905 Jy
! Component: 3800  -  total flux cleaned = -0.00402578 Jy
! Component: 3850  -  total flux cleaned = -0.0040392 Jy
! Component: 3900  -  total flux cleaned = -0.00407882 Jy
! Component: 3950  -  total flux cleaned = -0.0041314 Jy
! Component: 4000  -  total flux cleaned = -0.00413138 Jy
! Component: 4050  -  total flux cleaned = -0.00413139 Jy
! Total flux subtracted in 4096 components = -0.0041703 Jy
! Clean residual min=-0.000727 max=0.001110 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.285303 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 426 components and 0.285303 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0505-2930_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.006 x 14.67 at 7.826 degrees (North through East)
! Clean map  min=-0.0021765  max=0.27336 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0505-2930_S_b_map.fits
wmodel /image_prod/ug002_uva//J0505-2930_S_b_map.mod
! Writing 426 model components to file: /image_prod/ug002_uva//J0505-2930_S_b_map.mod
wobs   /image_prod/ug002_uva//J0505-2930_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0505-2930_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J0505-2930_S_b_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0505-2930_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.273357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247435 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.271551 0.271551 0.543102 1.0862 2.17241 4.34481 8.68963 17.3793 34.7585 69.517
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.273 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1104.77 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0505-2930_S_b_dfm.log closed on Wed Mar  4 20:39:41 2020