! Started logfile: /image_prod/ug002_uva//J0457-2324_X_g_dfm.log on Wed Mar 4 20:34:43 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0457-2324_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0457-2324_X_g_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! AN table 2: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.894097 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6180 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0457-2324_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=2.316519Jy sigma=8.203160 ! Fit after self-cal, rms=1.132485Jy sigma=3.833941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6045 mas, bmaj=2.044 mas, bpa=-12.98 degrees ! Estimated noise=3.45778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4333 Jy ! Component: 100 - total flux cleaned = 1.80323 Jy ! Total flux subtracted in 100 components = 1.80323 Jy ! Clean residual min=-0.070458 max=0.169564 Jy/beam ! Clean residual mean=0.000138 rms=0.019573 Jy/beam ! Combined flux in latest and established models = 1.80323 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.80323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.490524Jy sigma=1.602177 ! Fit after self-cal, rms=0.490041Jy sigma=1.600603 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195752 Jy ! Component: 100 - total flux cleaned = 0.308282 Jy ! Total flux subtracted in 100 components = 0.308282 Jy ! Clean residual min=-0.047496 max=0.085126 Jy/beam ! Clean residual mean=0.000078 rms=0.012871 Jy/beam ! Combined flux in latest and established models = 2.11151 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 2.11151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.323330Jy sigma=1.070232 ! Fit after self-cal, rms=0.322480Jy sigma=1.066687 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883388 Jy ! Component: 100 - total flux cleaned = 0.148903 Jy ! Total flux subtracted in 100 components = 0.148903 Jy ! Clean residual min=-0.043298 max=0.071756 Jy/beam ! Clean residual mean=0.000067 rms=0.010808 Jy/beam ! Combined flux in latest and established models = 2.26041 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 2.26041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267019Jy sigma=0.893073 ! Fit after self-cal, rms=0.265512Jy sigma=0.887258 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7545 mas, bmaj=2.397 mas, bpa=-12.13 degrees ! Estimated noise=2.58863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106414 Jy ! Component: 100 - total flux cleaned = 0.179133 Jy ! Component: 150 - total flux cleaned = 0.233004 Jy ! Component: 200 - total flux cleaned = 0.273945 Jy ! Total flux subtracted in 200 components = 0.273945 Jy ! Clean residual min=-0.041143 max=0.040957 Jy/beam ! Clean residual mean=0.000082 rms=0.011225 Jy/beam ! Combined flux in latest and established models = 2.53436 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 82 components and 2.53436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.193966Jy sigma=0.673982 ! Fit after self-cal, rms=0.193287Jy sigma=0.671556 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7545 x 2.397 at -12.13 degrees (North through East) ! Clean map min=-0.037825 max=1.9354 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.03 KP 1.07 ! MK 1.03 NL 1.02 OV 1.02 PT 0.87 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.00 HN 1.14 KP 1.06 ! LA 1.03 MK 1.00 NL 1.08 OV 1.01 ! PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.00 KP 1.04 ! MK 1.00 NL 1.01 OV 0.99 PT 0.92 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 1.10 KP 1.05 ! LA 1.03 MK 0.97 NL 1.07 OV 1.00 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.00 KP 1.04 ! MK 1.02 NL 1.00 OV 1.00 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 1.12 KP 1.04 ! LA 1.01 MK 0.99 NL 1.08 OV 0.99 ! PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.04 KP 1.03 ! MK 1.04 NL 0.97 OV 1.01 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 HN 1.15 KP 1.02 ! LA 1.06 MK 1.01 NL 1.04 OV 1.01 ! PT 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 0.98 KP 1.03 ! MK 1.01 NL 1.00 OV 1.00 PT 0.88 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.02 HN 1.12 KP 1.03 ! LA 1.00 MK 0.99 NL 1.07 OV 0.99 ! PT 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.98 KP 1.04 ! MK 1.00 NL 1.01 OV 1.01 PT 0.88 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00 HN 1.05 KP 1.04 ! LA 0.99 MK 0.98 NL 1.10 OV 1.01 ! PT 0.89 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.98 KP 1.04 ! MK 1.09 NL 1.01 OV 0.98 PT 0.87 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.99 HN 1.08 KP 1.04 ! LA 0.99 MK 1.05 NL 1.12 OV 0.97 ! PT 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.00 KP 1.05 ! MK 0.99 NL 0.99 OV 1.01 PT 0.89 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 1.08 KP 1.05 ! LA 1.02 MK 0.98 NL 1.05 OV 1.02 ! PT 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.03 KP 1.01 ! MK 1.00 NL 0.98 OV 0.99 PT 0.89 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HN 1.13 KP 1.01 ! LA 1.02 MK 0.98 NL 1.06 OV 0.98 ! PT 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.02 KP 1.04 ! MK 1.04 NL 1.01 OV 1.01 PT 0.89 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 HN 1.09 KP 1.04 ! LA 1.01 MK 1.02 NL 1.05 OV 1.00 ! PT 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.98 KP 1.04 ! MK 1.04 NL 0.98 OV 0.98 PT 0.92 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00 HN 1.09 KP 1.03 ! LA 1.02 MK 0.98 NL 1.04 OV 0.98 ! PT 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.96 HN 1.03 KP 1.04 ! MK 1.09 NL 0.99 OV 1.00 PT 0.87 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.95 HN 1.14 KP 1.05 ! LA 1.01 MK 1.03 NL 1.05 OV 1.00 ! PT 0.89 ! ! ! Fit before self-cal, rms=0.193287Jy sigma=0.671556 ! Fit after self-cal, rms=0.096997Jy sigma=0.343924 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7639 mas, bmaj=2.397 mas, bpa=-12.16 degrees ! Estimated noise=2.57499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0213248 Jy ! Component: 100 - total flux cleaned = -0.0248314 Jy ! Component: 150 - total flux cleaned = -0.0268848 Jy ! Component: 200 - total flux cleaned = -0.0278429 Jy ! Total flux subtracted in 200 components = -0.0278429 Jy ! Clean residual min=-0.019890 max=0.012120 Jy/beam ! Clean residual mean=0.000005 rms=0.003334 Jy/beam ! Combined flux in latest and established models = 2.50651 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 2.50651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088719Jy sigma=0.313336 ! Fit after self-cal, rms=0.088440Jy sigma=0.312380 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088440Jy sigma=0.312380 ! Fit after self-cal, rms=0.085462Jy sigma=0.303506 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7641 mas, bmaj=2.396 mas, bpa=-12.23 degrees ! Estimated noise=2.57717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0146091 Jy ! Component: 100 - total flux cleaned = -0.0175553 Jy ! Component: 150 - total flux cleaned = -0.019375 Jy ! Component: 200 - total flux cleaned = -0.0204435 Jy ! Total flux subtracted in 200 components = -0.0204435 Jy ! Clean residual min=-0.015492 max=0.009878 Jy/beam ! Clean residual mean=0.000006 rms=0.002689 Jy/beam ! Combined flux in latest and established models = 2.48607 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 103 components and 2.48607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081998Jy sigma=0.290205 ! Fit after self-cal, rms=0.081913Jy sigma=0.289936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000650331 Jy ! Component: 100 - total flux cleaned = -0.00116587 Jy ! Component: 150 - total flux cleaned = -0.00132613 Jy ! Component: 200 - total flux cleaned = -0.00132217 Jy ! Total flux subtracted in 200 components = -0.00132217 Jy ! Clean residual min=-0.014482 max=0.009682 Jy/beam ! Clean residual mean=0.000006 rms=0.002641 Jy/beam ! Combined flux in latest and established models = 2.48475 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 2.48475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081359Jy sigma=0.287531 ! Fit after self-cal, rms=0.081336Jy sigma=0.287440 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081336Jy sigma=0.287440 ! Fit after self-cal, rms=0.079236Jy sigma=0.282045 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7644 mas, bmaj=2.395 mas, bpa=-12.26 degrees ! Estimated noise=2.57764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110449 Jy ! Component: 100 - total flux cleaned = -0.0142637 Jy ! Component: 150 - total flux cleaned = -0.0157137 Jy ! Component: 200 - total flux cleaned = -0.0167387 Jy ! Total flux subtracted in 200 components = -0.0167387 Jy ! Clean residual min=-0.011511 max=0.008596 Jy/beam ! Clean residual mean=0.000004 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 2.46801 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 112 components and 2.46801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077590Jy sigma=0.275717 ! Fit after self-cal, rms=0.077566Jy sigma=0.275658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441242 Jy ! Component: 100 - total flux cleaned = -0.000774048 Jy ! Component: 150 - total flux cleaned = -0.00077307 Jy ! Component: 200 - total flux cleaned = -0.00086492 Jy ! Total flux subtracted in 200 components = -0.00086492 Jy ! Clean residual min=-0.010966 max=0.008468 Jy/beam ! Clean residual mean=0.000004 rms=0.002198 Jy/beam ! Combined flux in latest and established models = 2.46714 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 121 components and 2.46714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077342Jy sigma=0.274662 ! Fit after self-cal, rms=0.077334Jy sigma=0.274636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077334Jy sigma=0.274636 ! Fit after self-cal, rms=0.075977Jy sigma=0.271467 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.991 mas, bmaj=4.717 mas, bpa=-0.2241 degrees ! Estimated noise=3.73262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00891981 Jy ! Component: 100 - total flux cleaned = -0.0128584 Jy ! Component: 150 - total flux cleaned = -0.0143558 Jy ! Component: 200 - total flux cleaned = -0.0146832 Jy ! Total flux subtracted in 200 components = -0.0146832 Jy ! Clean residual min=-0.015975 max=0.010868 Jy/beam ! Clean residual mean=-0.000000 rms=0.003150 Jy/beam ! Combined flux in latest and established models = 2.45246 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 136 components and 2.45246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075556Jy sigma=0.270572 ! Fit after self-cal, rms=0.075529Jy sigma=0.270472 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512797 Jy ! Component: 100 - total flux cleaned = -0.000518054 Jy ! Component: 150 - total flux cleaned = -0.000518608 Jy ! Component: 200 - total flux cleaned = -0.00038369 Jy ! Total flux subtracted in 200 components = -0.00038369 Jy ! Clean residual min=-0.015637 max=0.010834 Jy/beam ! Clean residual mean=-0.000001 rms=0.003141 Jy/beam ! Combined flux in latest and established models = 2.45208 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 142 components and 2.45208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075405Jy sigma=0.269945 ! Fit after self-cal, rms=0.075400Jy sigma=0.269924 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7645 mas, bmaj=2.393 mas, bpa=-12.28 degrees ! Estimated noise=2.57728 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7645 x 2.393 at -12.28 degrees (North through East) ! Clean map min=-0.0095191 max=1.9275 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075400Jy sigma=0.269924 ! Fit after self-cal, rms=0.071091Jy sigma=0.248662 ! Inverting map and beam ! Estimated beam: bmin=0.7651 mas, bmaj=2.394 mas, bpa=-12.28 degrees ! Estimated noise=2.57821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00729248 Jy ! Component: 100 - total flux cleaned = -0.00946422 Jy ! Component: 150 - total flux cleaned = -0.00960699 Jy ! Component: 200 - total flux cleaned = -0.00961119 Jy ! Total flux subtracted in 200 components = -0.00961119 Jy ! Clean residual min=-0.008811 max=0.007466 Jy/beam ! Clean residual mean=0.000000 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 2.44247 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 152 components and 2.44247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070288Jy sigma=0.245074 ! Fit after self-cal, rms=0.070266Jy sigma=0.245030 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364155 Jy ! Component: 100 - total flux cleaned = -0.000264298 Jy ! Component: 150 - total flux cleaned = -0.000447666 Jy ! Component: 200 - total flux cleaned = -0.000533188 Jy ! Total flux subtracted in 200 components = -0.000533188 Jy ! Clean residual min=-0.008171 max=0.007300 Jy/beam ! Clean residual mean=-0.000000 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 2.44193 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 159 components and 2.44193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070060Jy sigma=0.244072 ! Fit after self-cal, rms=0.070056Jy sigma=0.244057 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070056Jy sigma=0.244057 ! Fit after self-cal, rms=0.069305Jy sigma=0.242566 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6112 mas, bmaj=2.028 mas, bpa=-13.08 degrees ! Estimated noise=3.4865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4448 Jy ! Component: 100 - total flux cleaned = 1.80685 Jy ! Component: 150 - total flux cleaned = 1.99281 Jy ! Component: 200 - total flux cleaned = 2.09742 Jy ! Total flux subtracted in 200 components = 2.09742 Jy ! Clean residual min=-0.020084 max=0.052633 Jy/beam ! Clean residual mean=0.000041 rms=0.006783 Jy/beam ! Combined flux in latest and established models = 2.09742 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 2.09742 Jy ! Inverting map and beam ! Estimated beam: bmin=0.765 mas, bmaj=2.393 mas, bpa=-12.28 degrees ! Estimated noise=2.57709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108277 Jy ! Component: 100 - total flux cleaned = 0.171116 Jy ! Component: 150 - total flux cleaned = 0.212487 Jy ! Component: 200 - total flux cleaned = 0.241627 Jy ! Total flux subtracted in 200 components = 0.241627 Jy ! Clean residual min=-0.010696 max=0.017811 Jy/beam ! Clean residual mean=-0.000000 rms=0.003341 Jy/beam ! Combined flux in latest and established models = 2.33905 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 60 components and 2.33905 Jy ! Inverting map ! Added new window around map position (2.2, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218094 Jy ! Component: 100 - total flux cleaned = 0.0382182 Jy ! Component: 150 - total flux cleaned = 0.0508057 Jy ! Component: 200 - total flux cleaned = 0.060526 Jy ! Total flux subtracted in 200 components = 0.060526 Jy ! Clean residual min=-0.008942 max=0.007328 Jy/beam ! Clean residual mean=-0.000003 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 2.39957 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 104 components and 2.39957 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.996 mas, bmaj=4.718 mas, bpa=-0.1927 degrees ! Estimated noise=3.72569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133229 Jy ! Component: 100 - total flux cleaned = 0.0209472 Jy ! Component: 150 - total flux cleaned = 0.0249843 Jy ! Component: 200 - total flux cleaned = 0.0261662 Jy ! Total flux subtracted in 200 components = 0.0261662 Jy ! Clean residual min=-0.012373 max=0.009033 Jy/beam ! Clean residual mean=-0.000008 rms=0.002574 Jy/beam ! Combined flux in latest and established models = 2.42574 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367949 Jy ! Component: 100 - total flux cleaned = 0.000581927 Jy ! Component: 150 - total flux cleaned = 0.000775716 Jy ! Component: 200 - total flux cleaned = 0.000953115 Jy ! Total flux subtracted in 200 components = 0.000953115 Jy ! Clean residual min=-0.011951 max=0.008904 Jy/beam ! Clean residual mean=-0.000009 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 2.42669 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 165 components and 2.42669 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.765 mas, bmaj=2.393 mas, bpa=-12.28 degrees ! Estimated noise=2.57709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287068 Jy ! Component: 100 - total flux cleaned = 0.00385878 Jy ! Component: 150 - total flux cleaned = 0.00410196 Jy ! Component: 200 - total flux cleaned = 0.00421256 Jy ! Total flux subtracted in 200 components = 0.00421256 Jy ! Clean residual min=-0.008949 max=0.006548 Jy/beam ! Clean residual mean=-0.000004 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 2.43091 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 177 components and 2.43091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068807Jy sigma=0.240997 ! Fit after self-cal, rms=0.068703Jy sigma=0.240525 wmodel J0457-2324_X_g_map.mod ! Writing 177 model components to file: J0457-2324_X_g_map.mod wobs J0457-2324_X_g_uvs.fits ! Writing UV FITS file: J0457-2324_X_g_uvs.fits wwins J0457-2324_X_g_map.win ! wwins: Wrote 4 windows to J0457-2324_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331108 Jy ! Component: 100 - total flux cleaned = -0.00553651 Jy ! Component: 150 - total flux cleaned = -0.00768257 Jy ! Component: 200 - total flux cleaned = -0.00989791 Jy ! Component: 250 - total flux cleaned = -0.0116856 Jy ! Component: 300 - total flux cleaned = -0.0130046 Jy ! Component: 350 - total flux cleaned = -0.0139949 Jy ! Component: 400 - total flux cleaned = -0.0149435 Jy ! Component: 450 - total flux cleaned = -0.0158519 Jy ! Component: 500 - total flux cleaned = -0.0165711 Jy ! Component: 550 - total flux cleaned = -0.0173478 Jy ! Component: 600 - total flux cleaned = -0.0178737 Jy ! Component: 650 - total flux cleaned = -0.0182391 Jy ! Component: 700 - total flux cleaned = -0.0184522 Jy ! Component: 750 - total flux cleaned = -0.0187278 Jy ! Component: 800 - total flux cleaned = -0.0187957 Jy ! Component: 850 - total flux cleaned = -0.0191266 Jy ! Component: 900 - total flux cleaned = -0.0193202 Jy ! Component: 950 - total flux cleaned = -0.0195089 Jy ! Component: 1000 - total flux cleaned = -0.0196315 Jy ! Component: 1050 - total flux cleaned = -0.0196906 Jy ! Component: 1100 - total flux cleaned = -0.0199245 Jy ! Component: 1150 - total flux cleaned = -0.0198666 Jy ! Component: 1200 - total flux cleaned = -0.0200925 Jy ! Component: 1250 - total flux cleaned = -0.0200367 Jy ! Component: 1300 - total flux cleaned = -0.0200372 Jy ! Component: 1350 - total flux cleaned = -0.0200375 Jy ! Component: 1400 - total flux cleaned = -0.0200379 Jy ! Component: 1450 - total flux cleaned = -0.0201929 Jy ! Component: 1500 - total flux cleaned = -0.0203954 Jy ! Component: 1550 - total flux cleaned = -0.0203448 Jy ! Component: 1600 - total flux cleaned = -0.0205406 Jy ! Component: 1650 - total flux cleaned = -0.0206844 Jy ! Component: 1700 - total flux cleaned = -0.0208269 Jy ! Component: 1750 - total flux cleaned = -0.0209676 Jy ! Component: 1800 - total flux cleaned = -0.0211052 Jy ! Component: 1850 - total flux cleaned = -0.021241 Jy ! Component: 1900 - total flux cleaned = -0.021508 Jy ! Component: 1950 - total flux cleaned = -0.0215079 Jy ! Component: 2000 - total flux cleaned = -0.0217672 Jy ! Component: 2050 - total flux cleaned = -0.0219373 Jy ! Component: 2100 - total flux cleaned = -0.0221057 Jy ! Component: 2150 - total flux cleaned = -0.0223135 Jy ! Component: 2200 - total flux cleaned = -0.0226405 Jy ! Component: 2250 - total flux cleaned = -0.0227205 Jy ! Component: 2300 - total flux cleaned = -0.0229197 Jy ! Component: 2350 - total flux cleaned = -0.0230771 Jy ! Component: 2400 - total flux cleaned = -0.0233092 Jy ! Component: 2450 - total flux cleaned = -0.0236153 Jy ! Component: 2500 - total flux cleaned = -0.02369 Jy ! Component: 2550 - total flux cleaned = -0.0239126 Jy ! Component: 2600 - total flux cleaned = -0.0239861 Jy ! Component: 2650 - total flux cleaned = -0.0240952 Jy ! Component: 2700 - total flux cleaned = -0.0244185 Jy ! Component: 2750 - total flux cleaned = -0.0245602 Jy ! Component: 2800 - total flux cleaned = -0.0247698 Jy ! Component: 2850 - total flux cleaned = -0.0249427 Jy ! Component: 2900 - total flux cleaned = -0.0250797 Jy ! Component: 2950 - total flux cleaned = -0.0252484 Jy ! Component: 3000 - total flux cleaned = -0.0255151 Jy ! Component: 3050 - total flux cleaned = -0.02568 Jy ! Component: 3100 - total flux cleaned = -0.0258106 Jy ! Component: 3150 - total flux cleaned = -0.0259714 Jy ! Component: 3200 - total flux cleaned = -0.026131 Jy ! Component: 3250 - total flux cleaned = -0.0264148 Jy ! Component: 3300 - total flux cleaned = -0.0265398 Jy ! Component: 3350 - total flux cleaned = -0.0267247 Jy ! Component: 3400 - total flux cleaned = -0.026969 Jy ! Component: 3450 - total flux cleaned = -0.0271502 Jy ! Component: 3500 - total flux cleaned = -0.0272995 Jy ! Component: 3550 - total flux cleaned = -0.0274774 Jy ! Component: 3600 - total flux cleaned = -0.0276826 Jy ! Component: 3650 - total flux cleaned = -0.0277405 Jy ! Component: 3700 - total flux cleaned = -0.0278848 Jy ! Component: 3750 - total flux cleaned = -0.0280266 Jy ! Component: 3800 - total flux cleaned = -0.0281676 Jy ! Component: 3850 - total flux cleaned = -0.0282794 Jy ! Component: 3900 - total flux cleaned = -0.0284458 Jy ! Component: 3950 - total flux cleaned = -0.0286376 Jy ! Component: 4000 - total flux cleaned = -0.0287192 Jy ! Component: 4050 - total flux cleaned = -0.0288538 Jy ! Total flux subtracted in 4096 components = -0.0290402 Jy ! Clean residual min=-0.001360 max=0.001461 Jy/beam ! Clean residual mean=-0.000002 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 2.40187 Jy keep ! Adding 366 model components to the UV plane model. ! The established model now contains 543 components and 2.40187 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0457-2324_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.765 x 2.393 at -12.28 degrees (North through East) ! Clean map min=-0.0053634 max=1.9458 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0457-2324_X_g_map.fits wmodel /image_prod/ug002_uva//J0457-2324_X_g_map.mod ! Writing 543 model components to file: /image_prod/ug002_uva//J0457-2324_X_g_map.mod wobs /image_prod/ug002_uva//J0457-2324_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0457-2324_X_g_uvs.fits wwins /image_prod/ug002_uva//J0457-2324_X_g_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0457-2324_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.94578 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000512202 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0789711 0.0789711 0.157942 0.315885 0.631769 1.26354 2.52708 5.05415 10.1083 20.2166 40.4332 80.8665 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.945 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3798.85 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0457-2324_X_g_dfm.log closed on Wed Mar 4 20:34:47 2020