! Started logfile: /image_prod/ug002_uva//J0457-2324_S_j_dfm.log on Wed Mar  4 20:33:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0457-2324_S_j_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0457-2324_S_j_uva.fits
! AN table 1: 7 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0457-2324
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 210 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0457-2324_S_j]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=2.742557Jy  sigma=13.306536
! Fit after  self-cal, rms=1.890920Jy  sigma=9.620246
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.107 mas, bmaj=9.813 mas, bpa=6.946 degrees
! Estimated noise=12.2872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.26559 Jy
! Component: 100  -  total flux cleaned = 2.5689 Jy
! Total flux subtracted in 100 components = 2.5689 Jy
! Clean residual min=-0.284740 max=0.287646 Jy/beam
! Clean residual mean=-0.000019 rms=0.090290 Jy/beam
! Combined flux in latest and established models = 2.5689 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 2.5689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.542344Jy  sigma=2.766858
! Fit after  self-cal, rms=0.542233Jy  sigma=2.766449
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.499 mas, bmaj=10.29 mas, bpa=4.664 degrees
! Estimated noise=11.0775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0753129 Jy
! Component: 100  -  total flux cleaned = 0.0899622 Jy
! Component: 150  -  total flux cleaned = 0.106078 Jy
! Component: 200  -  total flux cleaned = 0.120318 Jy
! Total flux subtracted in 200 components = 0.120318 Jy
! Clean residual min=-0.071511 max=0.071859 Jy/beam
! Clean residual mean=0.000010 rms=0.025233 Jy/beam
! Combined flux in latest and established models = 2.68922 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 50 components and 2.68922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.371232Jy  sigma=1.679200
! Fit after  self-cal, rms=0.371078Jy  sigma=1.678030
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.499 x 10.29 at 4.664 degrees (North through East)
! Clean map  min=-0.16638  max=2.522 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.03     NL        0.99     OV        0.91     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.01     NL        0.98     OV        1.24     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.06     NL        0.97     OV        0.85     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.371078Jy  sigma=1.678030
! Fit after  self-cal, rms=0.142597Jy  sigma=0.561120
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=10.3 mas, bpa=4.565 degrees
! Estimated noise=10.9221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0136365 Jy
! Component: 100  -  total flux cleaned = -0.0178706 Jy
! Component: 150  -  total flux cleaned = -0.0178525 Jy
! Component: 200  -  total flux cleaned = -0.0138618 Jy
! Total flux subtracted in 200 components = -0.0138618 Jy
! Clean residual min=-0.012833 max=0.012875 Jy/beam
! Clean residual mean=0.000010 rms=0.004687 Jy/beam
! Combined flux in latest and established models = 2.67536 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 89 components and 2.67536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126516Jy  sigma=0.517060
! Fit after  self-cal, rms=0.126395Jy  sigma=0.515934
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126395Jy  sigma=0.515934
! Fit after  self-cal, rms=0.125510Jy  sigma=0.510577
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=10.3 mas, bpa=4.527 degrees
! Estimated noise=10.9437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00298162 Jy
! Component: 100  -  total flux cleaned = -0.000972032 Jy
! Component: 150  -  total flux cleaned = 0.00130656 Jy
! Component: 200  -  total flux cleaned = 0.0021872 Jy
! Total flux subtracted in 200 components = 0.0021872 Jy
! Clean residual min=-0.007134 max=0.007170 Jy/beam
! Clean residual mean=0.000004 rms=0.002501 Jy/beam
! Combined flux in latest and established models = 2.67755 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 130 components and 2.67755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120470Jy  sigma=0.499481
! Fit after  self-cal, rms=0.120461Jy  sigma=0.499391
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232005 Jy
! Component: 100  -  total flux cleaned = 0.00367294 Jy
! Component: 150  -  total flux cleaned = 0.00402796 Jy
! Component: 200  -  total flux cleaned = 0.00432703 Jy
! Total flux subtracted in 200 components = 0.00432703 Jy
! Clean residual min=-0.004383 max=0.004435 Jy/beam
! Clean residual mean=0.000001 rms=0.001578 Jy/beam
! Combined flux in latest and established models = 2.68187 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 163 components and 2.68187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118233Jy  sigma=0.494160
! Fit after  self-cal, rms=0.118194Jy  sigma=0.494020
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118194Jy  sigma=0.494020
! Fit after  self-cal, rms=0.118057Jy  sigma=0.491715
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=10.3 mas, bpa=4.513 degrees
! Estimated noise=10.9517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149786 Jy
! Component: 100  -  total flux cleaned = -0.00268661 Jy
! Component: 150  -  total flux cleaned = -0.00352153 Jy
! Component: 200  -  total flux cleaned = -0.00460387 Jy
! Total flux subtracted in 200 components = -0.00460387 Jy
! Clean residual min=-0.004447 max=0.004557 Jy/beam
! Clean residual mean=0.000004 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 2.67727 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 209 components and 2.67727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116250Jy  sigma=0.489016
! Fit after  self-cal, rms=0.116212Jy  sigma=0.488880
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00290995 Jy
! Component: 100  -  total flux cleaned = -0.00311144 Jy
! Component: 150  -  total flux cleaned = -0.00311569 Jy
! Component: 200  -  total flux cleaned = -0.00330033 Jy
! Total flux subtracted in 200 components = -0.00330033 Jy
! Clean residual min=-0.003025 max=0.003034 Jy/beam
! Clean residual mean=0.000001 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 2.67397 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 240 components and 2.67397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115474Jy  sigma=0.486929
! Fit after  self-cal, rms=0.115482Jy  sigma=0.486904
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115482Jy  sigma=0.486904
! Fit after  self-cal, rms=0.115676Jy  sigma=0.485537
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.431 mas, bmaj=10.98 mas, bpa=1.457 degrees
! Estimated noise=13.8027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00717387 Jy
! Component: 100  -  total flux cleaned = -0.00988907 Jy
! Component: 150  -  total flux cleaned = -0.0120839 Jy
! Component: 200  -  total flux cleaned = -0.0136355 Jy
! Total flux subtracted in 200 components = -0.0136355 Jy
! Clean residual min=-0.003381 max=0.003354 Jy/beam
! Clean residual mean=0.000005 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 2.66033 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 266 components and 2.66033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114832Jy  sigma=0.485316
! Fit after  self-cal, rms=0.114808Jy  sigma=0.485181
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187925 Jy
! Component: 100  -  total flux cleaned = 0.00119264 Jy
! Component: 150  -  total flux cleaned = 0.000175942 Jy
! Component: 200  -  total flux cleaned = -0.000846164 Jy
! Total flux subtracted in 200 components = -0.000846164 Jy
! Clean residual min=-0.002165 max=0.002147 Jy/beam
! Clean residual mean=-0.000002 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 2.65949 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 304 components and 2.65949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114647Jy  sigma=0.484366
! Fit after  self-cal, rms=0.114638Jy  sigma=0.484316
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=10.31 mas, bpa=4.51 degrees
! Estimated noise=10.9521 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.483 x 10.31 at 4.51 degrees (North through East)
! Clean map  min=-0.10588  max=2.4734 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114638Jy  sigma=0.484316
! Fit after  self-cal, rms=0.089917Jy  sigma=0.343715
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=10.31 mas, bpa=4.505 degrees
! Estimated noise=10.9524 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188969 Jy
! Component: 100  -  total flux cleaned = 0.00170265 Jy
! Component: 150  -  total flux cleaned = 0.0015104 Jy
! Component: 200  -  total flux cleaned = 0.0013314 Jy
! Total flux subtracted in 200 components = 0.0013314 Jy
! Clean residual min=-0.003128 max=0.003098 Jy/beam
! Clean residual mean=0.000002 rms=0.000991 Jy/beam
! Combined flux in latest and established models = 2.66082 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 334 components and 2.66082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089066Jy  sigma=0.342214
! Fit after  self-cal, rms=0.089051Jy  sigma=0.342144
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149887 Jy
! Component: 100  -  total flux cleaned = 0.00124685 Jy
! Component: 150  -  total flux cleaned = 0.00112401 Jy
! Component: 200  -  total flux cleaned = 0.00112288 Jy
! Total flux subtracted in 200 components = 0.00112288 Jy
! Clean residual min=-0.001909 max=0.001909 Jy/beam
! Clean residual mean=0.000000 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 2.66194 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 377 components and 2.66194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088755Jy  sigma=0.340683
! Fit after  self-cal, rms=0.088761Jy  sigma=0.340665
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088761Jy  sigma=0.340665
! Fit after  self-cal, rms=0.088736Jy  sigma=0.339814
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=9.834 mas, bpa=6.677 degrees
! Estimated noise=12.0535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.22246 Jy
! Component: 100  -  total flux cleaned = 2.56087 Jy
! Component: 150  -  total flux cleaned = 2.60049 Jy
! Component: 200  -  total flux cleaned = 2.65259 Jy
! Total flux subtracted in 200 components = 2.65259 Jy
! Clean residual min=-0.103646 max=0.104385 Jy/beam
! Clean residual mean=0.000008 rms=0.029792 Jy/beam
! Combined flux in latest and established models = 2.65259 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 2.65259 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=10.31 mas, bpa=4.504 degrees
! Estimated noise=10.9495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00577843 Jy
! Component: 100  -  total flux cleaned = 0.0171053 Jy
! Component: 150  -  total flux cleaned = 0.01966 Jy
! Component: 200  -  total flux cleaned = 0.0196355 Jy
! Total flux subtracted in 200 components = 0.0196355 Jy
! Clean residual min=-0.039597 max=0.038639 Jy/beam
! Clean residual mean=0.000051 rms=0.012583 Jy/beam
! Combined flux in latest and established models = 2.67223 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 70 components and 2.67223 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.43 mas, bmaj=10.99 mas, bpa=1.436 degrees
! Estimated noise=13.7941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655084 Jy
! Component: 100  -  total flux cleaned = 0.0274487 Jy
! Component: 150  -  total flux cleaned = 0.0488846 Jy
! Component: 200  -  total flux cleaned = 0.0659876 Jy
! Total flux subtracted in 200 components = 0.0659876 Jy
! Clean residual min=-0.023942 max=0.023716 Jy/beam
! Clean residual mean=0.000073 rms=0.007489 Jy/beam
! Combined flux in latest and established models = 2.73821 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00887857 Jy
! Component: 100  -  total flux cleaned = 0.0214647 Jy
! Component: 150  -  total flux cleaned = 0.0367839 Jy
! Component: 200  -  total flux cleaned = 0.0539091 Jy
! Total flux subtracted in 200 components = 0.0539091 Jy
! Clean residual min=-0.033162 max=0.033686 Jy/beam
! Clean residual mean=0.000060 rms=0.008599 Jy/beam
! Combined flux in latest and established models = 2.79212 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 159 components and 2.79212 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=10.31 mas, bpa=4.504 degrees
! Estimated noise=10.9495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0234357 Jy
! Component: 100  -  total flux cleaned = -0.0192297 Jy
! Component: 150  -  total flux cleaned = -0.0166201 Jy
! Component: 200  -  total flux cleaned = -0.0205061 Jy
! Total flux subtracted in 200 components = -0.0205061 Jy
! Clean residual min=-0.021464 max=0.021418 Jy/beam
! Clean residual mean=-0.000006 rms=0.005920 Jy/beam
! Combined flux in latest and established models = 2.77162 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 189 components and 2.77162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103391Jy  sigma=0.379526
! Fit after  self-cal, rms=0.102747Jy  sigma=0.376445
wmodel J0457-2324_S_j_map.mod
! Writing 189 model components to file: J0457-2324_S_j_map.mod
wobs   J0457-2324_S_j_uvs.fits
! Writing UV FITS file: J0457-2324_S_j_uvs.fits
wwins  J0457-2324_S_j_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uva//J0457-2324_S_j_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.484 x 10.31 at 4.504 degrees (North through East)
! Clean map  min=-0.11985  max=2.4334 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0457-2324_S_j_map.fits
wmodel /image_prod/ug002_uva//J0457-2324_S_j_map.mod
! Writing 189 model components to file: /image_prod/ug002_uva//J0457-2324_S_j_map.mod
wobs   /image_prod/ug002_uva//J0457-2324_S_j_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0457-2324_S_j_uvs.fits
wwins  /image_prod/ug002_uva//J0457-2324_S_j_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.43339 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00491186 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.605556 0.605556 1.21111 2.42222 4.84445 9.6889 19.3778 38.7556 77.5112
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0147 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.433 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  495.412 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0457-2324_S_j_dfm.log closed on Wed Mar  4 20:33:50 2020