! Started logfile: /image_prod/ug002_uva//J0448-2626_S_dfm.log on Wed Mar 4 20:28:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0448-2626_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0448-2626_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.992778 visibilities/baseline/integration-bin. ! Found source: J0448-2626 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5361 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0448-2626_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.010352Jy sigma=6.684420 ! Fit after self-cal, rms=0.906047Jy sigma=5.980776 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=6.638 mas, bpa=-6.186 degrees ! Estimated noise=2.513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731011 Jy ! Component: 100 - total flux cleaned = 0.0902271 Jy ! Total flux subtracted in 100 components = 0.0902271 Jy ! Clean residual min=-0.006252 max=0.006525 Jy/beam ! Clean residual mean=-0.000006 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.0902271 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0902271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091690Jy sigma=0.466730 ! Fit after self-cal, rms=0.091648Jy sigma=0.466516 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.921 mas, bpa=-5.474 degrees ! Estimated noise=1.52427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879375 Jy ! Component: 100 - total flux cleaned = 0.0121989 Jy ! Component: 150 - total flux cleaned = 0.0137721 Jy ! Component: 200 - total flux cleaned = 0.0145527 Jy ! Total flux subtracted in 200 components = 0.0145527 Jy ! Clean residual min=-0.004124 max=0.005346 Jy/beam ! Clean residual mean=-0.000022 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.10478 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.10478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090764Jy sigma=0.459754 ! Fit after self-cal, rms=0.090778Jy sigma=0.459673 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 7.921 at -5.474 degrees (North through East) ! Clean map min=-0.0041072 max=0.094298 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.05 KP 0.96 LA 0.98 ! MK 1.01 NL 1.10 OV 0.87 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.05 KP 0.95 LA 1.00 ! MK 0.96 NL 1.07 OV 0.96 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 KP 1.03 LA 0.99 ! MK 1.02 NL 1.02 OV 0.90 PT 1.00 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.090778Jy sigma=0.459673 ! Fit after self-cal, rms=0.098295Jy sigma=0.455954 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=7.932 mas, bpa=-5.307 degrees ! Estimated noise=1.53416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011126 Jy ! Component: 100 - total flux cleaned = 0.00127588 Jy ! Component: 150 - total flux cleaned = 0.00131341 Jy ! Component: 200 - total flux cleaned = 0.00134904 Jy ! Total flux subtracted in 200 components = 0.00134904 Jy ! Clean residual min=-0.003541 max=0.004879 Jy/beam ! Clean residual mean=-0.000022 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.106129 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.106129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098241Jy sigma=0.455907 ! Fit after self-cal, rms=0.098333Jy sigma=0.455801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098333Jy sigma=0.455801 ! Fit after self-cal, rms=0.097828Jy sigma=0.453893 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.902 mas, bpa=-5.358 degrees ! Estimated noise=1.55365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142428 Jy ! Component: 100 - total flux cleaned = 0.00189777 Jy ! Component: 150 - total flux cleaned = 0.00196865 Jy ! Component: 200 - total flux cleaned = 0.00201668 Jy ! Total flux subtracted in 200 components = 0.00201668 Jy ! Clean residual min=-0.003116 max=0.004756 Jy/beam ! Clean residual mean=-0.000022 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.108146 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.108146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097760Jy sigma=0.453861 ! Fit after self-cal, rms=0.097793Jy sigma=0.453833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045323 Jy ! Component: 100 - total flux cleaned = 0.0065984 Jy ! Component: 150 - total flux cleaned = 0.00761264 Jy ! Component: 200 - total flux cleaned = 0.00788046 Jy ! Total flux subtracted in 200 components = 0.00788046 Jy ! Clean residual min=-0.002878 max=0.003547 Jy/beam ! Clean residual mean=-0.000014 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.116026 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 58 components and 0.116026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097504Jy sigma=0.452349 ! Fit after self-cal, rms=0.097455Jy sigma=0.452138 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097455Jy sigma=0.452138 ! Fit after self-cal, rms=0.087816Jy sigma=0.450288 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=7.874 mas, bpa=-5.255 degrees ! Estimated noise=1.54552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155692 Jy ! Component: 100 - total flux cleaned = 0.00194053 Jy ! Component: 150 - total flux cleaned = 0.00214571 Jy ! Component: 200 - total flux cleaned = 0.00224686 Jy ! Total flux subtracted in 200 components = 0.00224686 Jy ! Clean residual min=-0.002680 max=0.002913 Jy/beam ! Clean residual mean=-0.000016 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.118273 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.118273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087765Jy sigma=0.450082 ! Fit after self-cal, rms=0.087725Jy sigma=0.450019 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515927 Jy ! Component: 100 - total flux cleaned = 0.000560014 Jy ! Component: 150 - total flux cleaned = 0.000622079 Jy ! Component: 200 - total flux cleaned = 0.000661146 Jy ! Total flux subtracted in 200 components = 0.000661146 Jy ! Clean residual min=-0.002708 max=0.002848 Jy/beam ! Clean residual mean=-0.000015 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.118934 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.118934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087707Jy sigma=0.449965 ! Fit after self-cal, rms=0.087709Jy sigma=0.449960 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087709Jy sigma=0.449960 ! Fit after self-cal, rms=0.087387Jy sigma=0.449911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.915 mas, bmaj=20.85 mas, bpa=-4.158 degrees ! Estimated noise=1.93031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708641 Jy ! Component: 100 - total flux cleaned = 0.000785434 Jy ! Component: 150 - total flux cleaned = 0.000818348 Jy ! Component: 200 - total flux cleaned = 0.000833283 Jy ! Total flux subtracted in 200 components = 0.000833283 Jy ! Clean residual min=-0.002950 max=0.002845 Jy/beam ! Clean residual mean=-0.000031 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.119767 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.119767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087378Jy sigma=0.449876 ! Fit after self-cal, rms=0.087373Jy sigma=0.449866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183308 Jy ! Component: 100 - total flux cleaned = 0.000195929 Jy ! Component: 150 - total flux cleaned = 0.00019611 Jy ! Component: 200 - total flux cleaned = 0.00019646 Jy ! Total flux subtracted in 200 components = 0.00019646 Jy ! Clean residual min=-0.002924 max=0.002838 Jy/beam ! Clean residual mean=-0.000031 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.119964 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.119964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087369Jy sigma=0.449855 ! Fit after self-cal, rms=0.087371Jy sigma=0.449855 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=7.875 mas, bpa=-5.211 degrees ! Estimated noise=1.54642 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 7.875 at -5.211 degrees (North through East) ! Clean map min=-0.0026038 max=0.095297 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.595 mas, bpa=-5.956 degrees ! Estimated noise=2.5361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735968 Jy ! Component: 100 - total flux cleaned = 0.0919337 Jy ! Component: 150 - total flux cleaned = 0.0989382 Jy ! Component: 200 - total flux cleaned = 0.103083 Jy ! Total flux subtracted in 200 components = 0.103083 Jy ! Clean residual min=-0.004546 max=0.003990 Jy/beam ! Clean residual mean=-0.000010 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.103083 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.103083 Jy ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=7.875 mas, bpa=-5.211 degrees ! Estimated noise=1.54642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537786 Jy ! Component: 100 - total flux cleaned = 0.00890863 Jy ! Component: 150 - total flux cleaned = 0.0113838 Jy ! Component: 200 - total flux cleaned = 0.0131723 Jy ! Total flux subtracted in 200 components = 0.0131723 Jy ! Clean residual min=-0.002682 max=0.002808 Jy/beam ! Clean residual mean=-0.000020 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.116255 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 53 components and 0.116255 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.915 mas, bmaj=20.85 mas, bpa=-4.158 degrees ! Estimated noise=1.93031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175037 Jy ! Component: 100 - total flux cleaned = 0.00261657 Jy ! Component: 150 - total flux cleaned = 0.00285253 Jy ! Component: 200 - total flux cleaned = 0.00302293 Jy ! Total flux subtracted in 200 components = 0.00302293 Jy ! Clean residual min=-0.003013 max=0.002808 Jy/beam ! Clean residual mean=-0.000032 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.119278 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142678 Jy ! Component: 100 - total flux cleaned = 0.000246992 Jy ! Component: 150 - total flux cleaned = 0.000337384 Jy ! Component: 200 - total flux cleaned = 0.000390731 Jy ! Total flux subtracted in 200 components = 0.000390731 Jy ! Clean residual min=-0.003018 max=0.002794 Jy/beam ! Clean residual mean=-0.000031 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.119669 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 104 components and 0.119669 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=7.875 mas, bpa=-5.211 degrees ! Estimated noise=1.54642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.39759e-05 Jy ! Component: 100 - total flux cleaned = 2.04882e-05 Jy ! Component: 150 - total flux cleaned = 2.05923e-05 Jy ! Component: 200 - total flux cleaned = 4.49115e-05 Jy ! Total flux subtracted in 200 components = 4.49115e-05 Jy ! Clean residual min=-0.002593 max=0.002781 Jy/beam ! Clean residual mean=-0.000016 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.119714 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 124 components and 0.119714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087365Jy sigma=0.449849 ! Fit after self-cal, rms=0.087378Jy sigma=0.449824 wmodel J0448-2626_S_map.mod ! Writing 124 model components to file: J0448-2626_S_map.mod wobs J0448-2626_S_uvs.fits ! Writing UV FITS file: J0448-2626_S_uvs.fits wwins J0448-2626_S_map.win ! wwins: Wrote 3 windows to J0448-2626_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658449 Jy ! Component: 100 - total flux cleaned = 0.000841153 Jy ! Component: 150 - total flux cleaned = 0.000925487 Jy ! Component: 200 - total flux cleaned = 0.00112613 Jy ! Component: 250 - total flux cleaned = 0.00116601 Jy ! Component: 300 - total flux cleaned = 0.00127645 Jy ! Component: 350 - total flux cleaned = 0.00148718 Jy ! Component: 400 - total flux cleaned = 0.0016894 Jy ! Component: 450 - total flux cleaned = 0.00178692 Jy ! Component: 500 - total flux cleaned = 0.00185068 Jy ! Component: 550 - total flux cleaned = 0.00194262 Jy ! Component: 600 - total flux cleaned = 0.00191355 Jy ! Component: 650 - total flux cleaned = 0.00188512 Jy ! Component: 700 - total flux cleaned = 0.00185731 Jy ! Component: 750 - total flux cleaned = 0.0018566 Jy ! Component: 800 - total flux cleaned = 0.00182993 Jy ! Component: 850 - total flux cleaned = 0.00180412 Jy ! Component: 900 - total flux cleaned = 0.00180453 Jy ! Component: 950 - total flux cleaned = 0.00190289 Jy ! Component: 1000 - total flux cleaned = 0.00192641 Jy ! Component: 1050 - total flux cleaned = 0.00194973 Jy ! Component: 1100 - total flux cleaned = 0.00199591 Jy ! Component: 1150 - total flux cleaned = 0.00192712 Jy ! Component: 1200 - total flux cleaned = 0.00194977 Jy ! Component: 1250 - total flux cleaned = 0.00194959 Jy ! Component: 1300 - total flux cleaned = 0.00199306 Jy ! Component: 1350 - total flux cleaned = 0.00199274 Jy ! Component: 1400 - total flux cleaned = 0.00207649 Jy ! Component: 1450 - total flux cleaned = 0.00211766 Jy ! Component: 1500 - total flux cleaned = 0.00217874 Jy ! Component: 1550 - total flux cleaned = 0.00227965 Jy ! Component: 1600 - total flux cleaned = 0.00229924 Jy ! Component: 1650 - total flux cleaned = 0.00237767 Jy ! Component: 1700 - total flux cleaned = 0.00241629 Jy ! Component: 1750 - total flux cleaned = 0.00245473 Jy ! Component: 1800 - total flux cleaned = 0.00247404 Jy ! Component: 1850 - total flux cleaned = 0.0025115 Jy ! Component: 1900 - total flux cleaned = 0.00253008 Jy ! Component: 1950 - total flux cleaned = 0.00260338 Jy ! Component: 2000 - total flux cleaned = 0.00269366 Jy ! Component: 2050 - total flux cleaned = 0.002658 Jy ! Component: 2100 - total flux cleaned = 0.0026933 Jy ! Component: 2150 - total flux cleaned = 0.00272817 Jy ! Component: 2200 - total flux cleaned = 0.00276289 Jy ! Component: 2250 - total flux cleaned = 0.00278011 Jy ! Component: 2300 - total flux cleaned = 0.00284805 Jy ! Component: 2350 - total flux cleaned = 0.0029152 Jy ! Component: 2400 - total flux cleaned = 0.00301486 Jy ! Component: 2450 - total flux cleaned = 0.0030804 Jy ! Component: 2500 - total flux cleaned = 0.00309666 Jy ! Component: 2550 - total flux cleaned = 0.00316151 Jy ! Component: 2600 - total flux cleaned = 0.00322554 Jy ! Component: 2650 - total flux cleaned = 0.00327326 Jy ! Component: 2700 - total flux cleaned = 0.00333638 Jy ! Component: 2750 - total flux cleaned = 0.00339887 Jy ! Component: 2800 - total flux cleaned = 0.00350736 Jy ! Component: 2850 - total flux cleaned = 0.00355333 Jy ! Component: 2900 - total flux cleaned = 0.00364497 Jy ! Component: 2950 - total flux cleaned = 0.00373573 Jy ! Component: 3000 - total flux cleaned = 0.00381089 Jy ! Component: 3050 - total flux cleaned = 0.00382596 Jy ! Component: 3100 - total flux cleaned = 0.00394457 Jy ! Component: 3150 - total flux cleaned = 0.0040035 Jy ! Component: 3200 - total flux cleaned = 0.00409123 Jy ! Component: 3250 - total flux cleaned = 0.00413493 Jy ! Component: 3300 - total flux cleaned = 0.00422145 Jy ! Component: 3350 - total flux cleaned = 0.00427865 Jy ! Component: 3400 - total flux cleaned = 0.00437811 Jy ! Component: 3450 - total flux cleaned = 0.00440638 Jy ! Component: 3500 - total flux cleaned = 0.00449058 Jy ! Component: 3550 - total flux cleaned = 0.0045882 Jy ! Component: 3600 - total flux cleaned = 0.00461592 Jy ! Component: 3650 - total flux cleaned = 0.00469859 Jy ! Component: 3700 - total flux cleaned = 0.00476702 Jy ! Component: 3750 - total flux cleaned = 0.00480784 Jy ! Component: 3800 - total flux cleaned = 0.00490249 Jy ! Component: 3850 - total flux cleaned = 0.00498312 Jy ! Component: 3900 - total flux cleaned = 0.0050232 Jy ! Component: 3950 - total flux cleaned = 0.00508967 Jy ! Component: 4000 - total flux cleaned = 0.00514254 Jy ! Component: 4050 - total flux cleaned = 0.00519522 Jy ! Total flux subtracted in 4096 components = 0.00531308 Jy ! Clean residual min=-0.000675 max=0.000761 Jy/beam ! Clean residual mean=0.000003 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.125027 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 401 components and 0.125027 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0448-2626_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 7.875 at -5.211 degrees (North through East) ! Clean map min=-0.0015529 max=0.095411 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0448-2626_S_map.fits wmodel /image_prod/ug002_uva//J0448-2626_S_map.mod ! Writing 401 model components to file: /image_prod/ug002_uva//J0448-2626_S_map.mod wobs /image_prod/ug002_uva//J0448-2626_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0448-2626_S_uvs.fits wwins /image_prod/ug002_uva//J0448-2626_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0448-2626_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0954106 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228323 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.717917 0.717917 1.43583 2.87167 5.74334 11.4867 22.9734 45.9467 91.8934 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.095 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 417.875 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0448-2626_S_dfm.log closed on Wed Mar 4 20:29:02 2020