! Started logfile: /image_prod/ug002_uva//J0448+1127_S_dfm.log on Wed Mar  4 20:28:18 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0448+1127_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0448+1127_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.835185 visibilities/baseline/integration-bin.
! Found source: J0448+1127
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5412 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0448+1127_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005202Jy  sigma=8.722084
! Fit after  self-cal, rms=0.821452Jy  sigma=7.078056
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=12.64 mas, bpa=-14.81 degrees
! Estimated noise=1.51666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135664 Jy
! Component: 100  -  total flux cleaned = 0.181293 Jy
! Total flux subtracted in 100 components = 0.181293 Jy
! Clean residual min=-0.009029 max=0.020445 Jy/beam
! Clean residual mean=0.000001 rms=0.002845 Jy/beam
! Combined flux in latest and established models = 0.181293 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.181293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080100Jy  sigma=0.650441
! Fit after  self-cal, rms=0.079915Jy  sigma=0.649270
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225389 Jy
! Component: 100  -  total flux cleaned = 0.0344041 Jy
! Total flux subtracted in 100 components = 0.0344041 Jy
! Clean residual min=-0.006293 max=0.014388 Jy/beam
! Clean residual mean=0.000003 rms=0.001863 Jy/beam
! Combined flux in latest and established models = 0.215697 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.215697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072760Jy  sigma=0.584382
! Fit after  self-cal, rms=0.072679Jy  sigma=0.583924
! Inverting map 
! Added new window around map position (28, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012473 Jy
! Component: 100  -  total flux cleaned = 0.0184875 Jy
! Total flux subtracted in 100 components = 0.0184875 Jy
! Clean residual min=-0.004889 max=0.007796 Jy/beam
! Clean residual mean=0.000004 rms=0.001429 Jy/beam
! Combined flux in latest and established models = 0.234184 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 39 components and 0.234184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069859Jy  sigma=0.559189
! Fit after  self-cal, rms=0.069752Jy  sigma=0.558476
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.966 mas, bmaj=12.71 mas, bpa=-14.47 degrees
! Estimated noise=1.14008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00841916 Jy
! Component: 100  -  total flux cleaned = 0.0139476 Jy
! Component: 150  -  total flux cleaned = 0.0168884 Jy
! Component: 200  -  total flux cleaned = 0.0194662 Jy
! Total flux subtracted in 200 components = 0.0194662 Jy
! Clean residual min=-0.004587 max=0.006817 Jy/beam
! Clean residual mean=0.000014 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 0.253651 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 76 components and 0.253651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068283Jy  sigma=0.546548
! Fit after  self-cal, rms=0.068231Jy  sigma=0.546270
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.966 x 12.71 at -14.47 degrees (North through East)
! Clean map  min=-0.0047895  max=0.18244 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.03     KP        0.96     
!   LA        1.00     MK        1.06     NL        0.96     OV        1.00     
!   PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.02     NL        0.94     OV        1.01     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.04     KP        1.00     
!   LA        1.00     MK        1.02     NL        0.93     OV        1.01     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.068231Jy  sigma=0.546270
! Fit after  self-cal, rms=0.066541Jy  sigma=0.541145
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.71 mas, bpa=-14.49 degrees
! Estimated noise=1.13461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564587 Jy
! Component: 100  -  total flux cleaned = 0.00861761 Jy
! Component: 150  -  total flux cleaned = 0.0105512 Jy
! Component: 200  -  total flux cleaned = 0.0123503 Jy
! Total flux subtracted in 200 components = 0.0123503 Jy
! Clean residual min=-0.003111 max=0.003621 Jy/beam
! Clean residual mean=0.000005 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.266001 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 118 components and 0.266001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065883Jy  sigma=0.535991
! Fit after  self-cal, rms=0.065811Jy  sigma=0.535435
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065811Jy  sigma=0.535435
! Fit after  self-cal, rms=0.065532Jy  sigma=0.529854
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.73 mas, bpa=-14.53 degrees
! Estimated noise=1.13512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287392 Jy
! Component: 100  -  total flux cleaned = 0.00453483 Jy
! Component: 150  -  total flux cleaned = 0.00555494 Jy
! Component: 200  -  total flux cleaned = 0.00640475 Jy
! Total flux subtracted in 200 components = 0.00640475 Jy
! Clean residual min=-0.002508 max=0.002666 Jy/beam
! Clean residual mean=0.000003 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.272406 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 154 components and 0.272406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065353Jy  sigma=0.528718
! Fit after  self-cal, rms=0.065336Jy  sigma=0.528575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00087034 Jy
! Component: 100  -  total flux cleaned = 0.00156799 Jy
! Component: 150  -  total flux cleaned = 0.00192706 Jy
! Component: 200  -  total flux cleaned = 0.00237227 Jy
! Total flux subtracted in 200 components = 0.00237227 Jy
! Clean residual min=-0.002379 max=0.002502 Jy/beam
! Clean residual mean=0.000003 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.274778 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 172 components and 0.274778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065274Jy  sigma=0.528238
! Fit after  self-cal, rms=0.065269Jy  sigma=0.528213
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065269Jy  sigma=0.528213
! Fit after  self-cal, rms=0.064343Jy  sigma=0.525267
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=12.7 mas, bpa=-14.51 degrees
! Estimated noise=1.13403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151195 Jy
! Component: 100  -  total flux cleaned = 0.00254756 Jy
! Component: 150  -  total flux cleaned = 0.00324017 Jy
! Component: 200  -  total flux cleaned = 0.0038293 Jy
! Total flux subtracted in 200 components = 0.0038293 Jy
! Clean residual min=-0.002519 max=0.002208 Jy/beam
! Clean residual mean=0.000006 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.278607 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 196 components and 0.278607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064280Jy  sigma=0.524938
! Fit after  self-cal, rms=0.064268Jy  sigma=0.524892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00068617 Jy
! Component: 100  -  total flux cleaned = 0.00124288 Jy
! Component: 150  -  total flux cleaned = 0.00147291 Jy
! Component: 200  -  total flux cleaned = 0.00164071 Jy
! Total flux subtracted in 200 components = 0.00164071 Jy
! Clean residual min=-0.002492 max=0.002262 Jy/beam
! Clean residual mean=0.000005 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.280248 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 207 components and 0.280248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064242Jy  sigma=0.524763
! Fit after  self-cal, rms=0.064240Jy  sigma=0.524756
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064240Jy  sigma=0.524756
! Fit after  self-cal, rms=0.064351Jy  sigma=0.524688
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.595 mas, bmaj=12.67 mas, bpa=-12.95 degrees
! Estimated noise=1.29571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116429 Jy
! Component: 100  -  total flux cleaned = 0.00196264 Jy
! Component: 150  -  total flux cleaned = 0.00260689 Jy
! Component: 200  -  total flux cleaned = 0.00315913 Jy
! Total flux subtracted in 200 components = 0.00315913 Jy
! Clean residual min=-0.002193 max=0.002486 Jy/beam
! Clean residual mean=0.000008 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.283407 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 240 components and 0.283407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064329Jy  sigma=0.524618
! Fit after  self-cal, rms=0.064327Jy  sigma=0.524605
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000584702 Jy
! Component: 100  -  total flux cleaned = 0.00106736 Jy
! Component: 150  -  total flux cleaned = 0.00145693 Jy
! Component: 200  -  total flux cleaned = 0.00174457 Jy
! Total flux subtracted in 200 components = 0.00174457 Jy
! Clean residual min=-0.002192 max=0.002464 Jy/beam
! Clean residual mean=0.000007 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.285152 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 255 components and 0.285152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064317Jy  sigma=0.524601
! Fit after  self-cal, rms=0.064317Jy  sigma=0.524596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.003 mas, bmaj=12.69 mas, bpa=-14.51 degrees
! Estimated noise=1.13422 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.003 x 12.69 at -14.51 degrees (North through East)
! Clean map  min=-0.0024  max=0.18146 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.411 mas, bmaj=12.69 mas, bpa=-14.89 degrees
! Estimated noise=1.51846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13543 Jy
! Component: 100  -  total flux cleaned = 0.180782 Jy
! Component: 150  -  total flux cleaned = 0.203325 Jy
! Component: 200  -  total flux cleaned = 0.217934 Jy
! Total flux subtracted in 200 components = 0.217934 Jy
! Clean residual min=-0.005520 max=0.008143 Jy/beam
! Clean residual mean=0.000002 rms=0.001507 Jy/beam
! Combined flux in latest and established models = 0.217934 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.217934 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.003 mas, bmaj=12.69 mas, bpa=-14.51 degrees
! Estimated noise=1.13422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130944 Jy
! Component: 100  -  total flux cleaned = 0.0225431 Jy
! Component: 150  -  total flux cleaned = 0.0296921 Jy
! Component: 200  -  total flux cleaned = 0.0351993 Jy
! Total flux subtracted in 200 components = 0.0351993 Jy
! Clean residual min=-0.003244 max=0.003793 Jy/beam
! Clean residual mean=0.000013 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.253133 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 61 components and 0.253133 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.595 mas, bmaj=12.67 mas, bpa=-12.95 degrees
! Estimated noise=1.29571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00626692 Jy
! Component: 100  -  total flux cleaned = 0.0107668 Jy
! Component: 150  -  total flux cleaned = 0.0142148 Jy
! Component: 200  -  total flux cleaned = 0.0169197 Jy
! Total flux subtracted in 200 components = 0.0169197 Jy
! Clean residual min=-0.002802 max=0.002894 Jy/beam
! Clean residual mean=0.000015 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.270053 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217341 Jy
! Component: 100  -  total flux cleaned = 0.00398512 Jy
! Component: 150  -  total flux cleaned = 0.00556351 Jy
! Component: 200  -  total flux cleaned = 0.00695469 Jy
! Total flux subtracted in 200 components = 0.00695469 Jy
! Clean residual min=-0.002561 max=0.002800 Jy/beam
! Clean residual mean=0.000011 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.277008 Jy
! Adding 141 model components to the UV plane model.
! The established model now contains 199 components and 0.277008 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.003 mas, bmaj=12.69 mas, bpa=-14.51 degrees
! Estimated noise=1.13422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018899 Jy
! Component: 100  -  total flux cleaned = 0.00249363 Jy
! Component: 150  -  total flux cleaned = 0.00303855 Jy
! Component: 200  -  total flux cleaned = 0.00348612 Jy
! Total flux subtracted in 200 components = 0.00348612 Jy
! Clean residual min=-0.002597 max=0.002321 Jy/beam
! Clean residual mean=0.000005 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.280494 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 219 components and 0.280494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064449Jy  sigma=0.525255
! Fit after  self-cal, rms=0.064421Jy  sigma=0.525141
wmodel J0448+1127_S_map.mod
! Writing 219 model components to file: J0448+1127_S_map.mod
wobs   J0448+1127_S_uvs.fits
! Writing UV FITS file: J0448+1127_S_uvs.fits
wwins  J0448+1127_S_map.win
! wwins: Wrote 3 windows to J0448+1127_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.46271e-05 Jy
! Component: 100  -  total flux cleaned = 0.000179409 Jy
! Component: 150  -  total flux cleaned = 0.000181585 Jy
! Component: 200  -  total flux cleaned = 5.46069e-05 Jy
! Component: 250  -  total flux cleaned = -6.79339e-05 Jy
! Component: 300  -  total flux cleaned = -6.71497e-05 Jy
! Component: 350  -  total flux cleaned = -6.71201e-05 Jy
! Component: 400  -  total flux cleaned = -6.75786e-05 Jy
! Component: 450  -  total flux cleaned = -0.000122492 Jy
! Component: 500  -  total flux cleaned = -0.000202198 Jy
! Component: 550  -  total flux cleaned = -0.000228466 Jy
! Component: 600  -  total flux cleaned = -0.000254302 Jy
! Component: 650  -  total flux cleaned = -0.000328028 Jy
! Component: 700  -  total flux cleaned = -0.000327213 Jy
! Component: 750  -  total flux cleaned = -0.000255916 Jy
! Component: 800  -  total flux cleaned = -0.000256238 Jy
! Component: 850  -  total flux cleaned = -0.000301084 Jy
! Component: 900  -  total flux cleaned = -0.000189795 Jy
! Component: 950  -  total flux cleaned = -0.000190018 Jy
! Component: 1000  -  total flux cleaned = -0.000211222 Jy
! Component: 1050  -  total flux cleaned = -0.000168896 Jy
! Component: 1100  -  total flux cleaned = -0.000127091 Jy
! Component: 1150  -  total flux cleaned = -6.63299e-05 Jy
! Component: 1200  -  total flux cleaned = -0.0001065 Jy
! Component: 1250  -  total flux cleaned = -8.66322e-05 Jy
! Component: 1300  -  total flux cleaned = -2.82706e-05 Jy
! Component: 1350  -  total flux cleaned = -4.7843e-05 Jy
! Component: 1400  -  total flux cleaned = -4.8013e-05 Jy
! Component: 1450  -  total flux cleaned = -0.000103965 Jy
! Component: 1500  -  total flux cleaned = -0.000104002 Jy
! Component: 1550  -  total flux cleaned = -8.63312e-05 Jy
! Component: 1600  -  total flux cleaned = -5.12535e-05 Jy
! Component: 1650  -  total flux cleaned = -5.13036e-05 Jy
! Component: 1700  -  total flux cleaned = -1.66752e-05 Jy
! Component: 1750  -  total flux cleaned = 3.0293e-07 Jy
! Component: 1800  -  total flux cleaned = 1.71108e-05 Jy
! Component: 1850  -  total flux cleaned = 6.70017e-05 Jy
! Component: 1900  -  total flux cleaned = 0.000116056 Jy
! Component: 1950  -  total flux cleaned = 9.96977e-05 Jy
! Component: 2000  -  total flux cleaned = 0.00016372 Jy
! Component: 2050  -  total flux cleaned = 0.000163396 Jy
! Component: 2100  -  total flux cleaned = 0.000163252 Jy
! Component: 2150  -  total flux cleaned = 0.000193948 Jy
! Component: 2200  -  total flux cleaned = 0.000254759 Jy
! Component: 2250  -  total flux cleaned = 0.000239372 Jy
! Component: 2300  -  total flux cleaned = 0.000239099 Jy
! Component: 2350  -  total flux cleaned = 0.000283034 Jy
! Component: 2400  -  total flux cleaned = 0.000297506 Jy
! Component: 2450  -  total flux cleaned = 0.000326165 Jy
! Component: 2500  -  total flux cleaned = 0.000354492 Jy
! Component: 2550  -  total flux cleaned = 0.000312089 Jy
! Component: 2600  -  total flux cleaned = 0.000256829 Jy
! Component: 2650  -  total flux cleaned = 0.000284507 Jy
! Component: 2700  -  total flux cleaned = 0.000230085 Jy
! Component: 2750  -  total flux cleaned = 0.000297623 Jy
! Component: 2800  -  total flux cleaned = 0.000230594 Jy
! Component: 2850  -  total flux cleaned = 0.000203931 Jy
! Component: 2900  -  total flux cleaned = 0.000190628 Jy
! Component: 2950  -  total flux cleaned = 0.00016467 Jy
! Component: 3000  -  total flux cleaned = 0.000177573 Jy
! Component: 3050  -  total flux cleaned = 0.000190425 Jy
! Component: 3100  -  total flux cleaned = 0.000202862 Jy
! Component: 3150  -  total flux cleaned = 0.000177596 Jy
! Component: 3200  -  total flux cleaned = 0.000115496 Jy
! Component: 3250  -  total flux cleaned = 0.000164775 Jy
! Component: 3300  -  total flux cleaned = 0.000140195 Jy
! Component: 3350  -  total flux cleaned = 0.000103732 Jy
! Component: 3400  -  total flux cleaned = 7.9602e-05 Jy
! Component: 3450  -  total flux cleaned = 9.1598e-05 Jy
! Component: 3500  -  total flux cleaned = 5.61691e-05 Jy
! Component: 3550  -  total flux cleaned = 6.78195e-05 Jy
! Component: 3600  -  total flux cleaned = 3.27879e-05 Jy
! Component: 3650  -  total flux cleaned = -1.86428e-06 Jy
! Component: 3700  -  total flux cleaned = -3.61969e-05 Jy
! Component: 3750  -  total flux cleaned = -5.88325e-05 Jy
! Component: 3800  -  total flux cleaned = -7.00961e-05 Jy
! Component: 3850  -  total flux cleaned = -9.25252e-05 Jy
! Component: 3900  -  total flux cleaned = -9.24467e-05 Jy
! Component: 3950  -  total flux cleaned = -0.000147681 Jy
! Component: 4000  -  total flux cleaned = -0.000114758 Jy
! Component: 4050  -  total flux cleaned = -0.000136627 Jy
! Total flux subtracted in 4096 components = -0.000158311 Jy
! Clean residual min=-0.000703 max=0.000625 Jy/beam
! Clean residual mean=0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.280335 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 525 components and 0.280335 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0448+1127_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.003 x 12.69 at -14.51 degrees (North through East)
! Clean map  min=-0.0015877  max=0.18221 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0448+1127_S_map.fits
wmodel /image_prod/ug002_uva//J0448+1127_S_map.mod
! Writing 525 model components to file: /image_prod/ug002_uva//J0448+1127_S_map.mod
wobs   /image_prod/ug002_uva//J0448+1127_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0448+1127_S_uvs.fits
wwins  /image_prod/ug002_uva//J0448+1127_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0448+1127_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.182208 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205827 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.338887 0.338887 0.677774 1.35555 2.7111 5.42219 10.8444 21.6888 43.3776 86.7551
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.182 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  885.25 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0448+1127_S_dfm.log closed on Wed Mar  4 20:28:22 2020