! Started logfile: /image_prod/ug002_uva//J0445+5124_S_dfm.log on Wed Mar 4 20:27:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0445+5124_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0445+5124_S_uva.fits ! AN table 1: 180 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J0445+5124 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7560 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0445+5124_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002836Jy sigma=9.503577 ! Fit after self-cal, rms=0.966858Jy sigma=9.200354 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.196 mas, bmaj=10.42 mas, bpa=1.38 degrees ! Estimated noise=1.72418 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247777 Jy ! Component: 100 - total flux cleaned = 0.0262783 Jy ! Total flux subtracted in 100 components = 0.0262783 Jy ! Clean residual min=-0.005068 max=0.004161 Jy/beam ! Clean residual mean=-0.000011 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.0262783 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0262783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061826Jy sigma=0.491015 ! Fit after self-cal, rms=0.060451Jy sigma=0.477517 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.625 mas, bmaj=11.2 mas, bpa=2.509 degrees ! Estimated noise=0.877861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181421 Jy ! Component: 100 - total flux cleaned = 0.000930352 Jy ! Component: 150 - total flux cleaned = 0.000111369 Jy ! Component: 200 - total flux cleaned = -0.000262646 Jy ! Total flux subtracted in 200 components = -0.000262646 Jy ! Clean residual min=-0.003677 max=0.002757 Jy/beam ! Clean residual mean=-0.000012 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.0260157 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0260157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058710Jy sigma=0.467026 ! Fit after self-cal, rms=0.057886Jy sigma=0.465316 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.625 x 11.2 at 2.509 degrees (North through East) ! Clean map min=-0.0047868 max=0.036956 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 KP 1.03 LA 1.03 ! MK 0.96 OV 1.01 PT 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.44 FD 1.04 KP 1.02 LA 1.12 ! MK 1.19 OV 1.02 PT 1.32 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.04 KP 1.00 LA 0.98 ! MK 1.19 OV 0.99 PT 1.13 ! ! ! Fit before self-cal, rms=0.057886Jy sigma=0.465316 ! Fit after self-cal, rms=0.050757Jy sigma=0.449667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.88 mas, bmaj=9.895 mas, bpa=2.43 degrees ! Estimated noise=0.88024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141281 Jy ! Component: 100 - total flux cleaned = 0.00152017 Jy ! Component: 150 - total flux cleaned = 0.00161033 Jy ! Component: 200 - total flux cleaned = 0.00166179 Jy ! Total flux subtracted in 200 components = 0.00166179 Jy ! Clean residual min=-0.001853 max=0.001748 Jy/beam ! Clean residual mean=-0.000017 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0276775 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.0276775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050705Jy sigma=0.449217 ! Fit after self-cal, rms=0.051227Jy sigma=0.442509 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.051227Jy sigma=0.442509 ! Fit after self-cal, rms=0.061786Jy sigma=0.436111 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.13 mas, bmaj=9.398 mas, bpa=1.295 degrees ! Estimated noise=0.910261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438208 Jy ! Component: 100 - total flux cleaned = 0.000484962 Jy ! Component: 150 - total flux cleaned = 0.000502944 Jy ! Component: 200 - total flux cleaned = 0.000510716 Jy ! Total flux subtracted in 200 components = 0.000510716 Jy ! Clean residual min=-0.001316 max=0.001629 Jy/beam ! Clean residual mean=-0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0281882 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0281882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061778Jy sigma=0.436085 ! Fit after self-cal, rms=0.062894Jy sigma=0.433399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154733 Jy ! Component: 100 - total flux cleaned = -0.00196559 Jy ! Component: 150 - total flux cleaned = -0.00194607 Jy ! Component: 200 - total flux cleaned = -0.00192996 Jy ! Total flux subtracted in 200 components = -0.00192996 Jy ! Clean residual min=-0.001557 max=0.001564 Jy/beam ! Clean residual mean=-0.000006 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0262582 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0262582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062824Jy sigma=0.433201 ! Fit after self-cal, rms=0.062837Jy sigma=0.433026 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062837Jy sigma=0.433026 ! Fit after self-cal, rms=0.087280Jy sigma=0.431792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.168 mas, bmaj=9.281 mas, bpa=0.9148 degrees ! Estimated noise=0.918423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223789 Jy ! Component: 100 - total flux cleaned = 0.000224082 Jy ! Component: 150 - total flux cleaned = 0.000233469 Jy ! Component: 200 - total flux cleaned = 0.000233383 Jy ! Total flux subtracted in 200 components = 0.000233383 Jy ! Clean residual min=-0.001365 max=0.001541 Jy/beam ! Clean residual mean=-0.000006 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0264916 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0264916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087273Jy sigma=0.431781 ! Fit after self-cal, rms=0.088030Jy sigma=0.431250 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (113.5, -82). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088528 Jy ! Component: 100 - total flux cleaned = 0.000669011 Jy ! Component: 150 - total flux cleaned = 0.000583504 Jy ! Component: 200 - total flux cleaned = 0.00048277 Jy ! Total flux subtracted in 200 components = 0.00048277 Jy ! Clean residual min=-0.001200 max=0.001131 Jy/beam ! Clean residual mean=-0.000009 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0269744 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 94 components and 0.0269744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087963Jy sigma=0.431001 ! Fit after self-cal, rms=0.087969Jy sigma=0.430860 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087969Jy sigma=0.430860 ! Fit after self-cal, rms=0.117405Jy sigma=0.430454 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.36 mas, bmaj=13.32 mas, bpa=76.63 degrees ! Estimated noise=1.00783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070245 Jy ! Component: 100 - total flux cleaned = 0.000593082 Jy ! Component: 150 - total flux cleaned = 0.000470088 Jy ! Component: 200 - total flux cleaned = 0.000380669 Jy ! Total flux subtracted in 200 components = 0.000380669 Jy ! Clean residual min=-0.001128 max=0.001060 Jy/beam ! Clean residual mean=-0.000009 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.027355 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.027355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.117384Jy sigma=0.430354 ! Fit after self-cal, rms=0.117708Jy sigma=0.430194 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264233 Jy ! Component: 100 - total flux cleaned = 0.00010078 Jy ! Component: 150 - total flux cleaned = -4.79859e-05 Jy ! Component: 200 - total flux cleaned = -0.000187136 Jy ! Total flux subtracted in 200 components = -0.000187136 Jy ! Clean residual min=-0.001176 max=0.001128 Jy/beam ! Clean residual mean=-0.000008 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0271679 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 138 components and 0.0271679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.117689Jy sigma=0.430192 ! Fit after self-cal, rms=0.117688Jy sigma=0.430106 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=6.178 mas, bmaj=9.236 mas, bpa=0.837 degrees ! Estimated noise=0.920506 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.178 x 9.236 at 0.837 degrees (North through East) ! Clean map min=-0.0051001 max=0.035358 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.557 mas, bmaj=8.881 mas, bpa=0.1014 degrees ! Estimated noise=1.77257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244336 Jy ! Component: 100 - total flux cleaned = 0.0245011 Jy ! Component: 150 - total flux cleaned = 0.0247168 Jy ! Component: 200 - total flux cleaned = 0.0248801 Jy ! Total flux subtracted in 200 components = 0.0248801 Jy ! Clean residual min=-0.003761 max=0.003086 Jy/beam ! Clean residual mean=-0.000004 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.0248801 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0248801 Jy ! Inverting map and beam ! Estimated beam: bmin=6.178 mas, bmaj=9.236 mas, bpa=0.837 degrees ! Estimated noise=0.920506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886121 Jy ! Component: 100 - total flux cleaned = 0.00184047 Jy ! Component: 150 - total flux cleaned = 0.00199153 Jy ! Component: 200 - total flux cleaned = 0.00193659 Jy ! Total flux subtracted in 200 components = 0.00193659 Jy ! Clean residual min=-0.001978 max=0.001465 Jy/beam ! Clean residual mean=-0.000010 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0268167 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.0268167 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.36 mas, bmaj=13.32 mas, bpa=76.63 degrees ! Estimated noise=1.00783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189377 Jy ! Component: 100 - total flux cleaned = -0.000328536 Jy ! Component: 150 - total flux cleaned = -0.000428326 Jy ! Component: 200 - total flux cleaned = -0.000563092 Jy ! Total flux subtracted in 200 components = -0.000563092 Jy ! Clean residual min=-0.001506 max=0.001135 Jy/beam ! Clean residual mean=-0.000007 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0262536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.13402e-05 Jy ! Component: 100 - total flux cleaned = -7.99765e-05 Jy ! Component: 150 - total flux cleaned = -7.98079e-05 Jy ! Component: 200 - total flux cleaned = -9.70806e-05 Jy ! Total flux subtracted in 200 components = -9.70806e-05 Jy ! Clean residual min=-0.001385 max=0.001082 Jy/beam ! Clean residual mean=-0.000007 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0261565 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.0261565 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.178 mas, bmaj=9.236 mas, bpa=0.837 degrees ! Estimated noise=0.920506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15667e-05 Jy ! Component: 100 - total flux cleaned = 4.49711e-06 Jy ! Component: 150 - total flux cleaned = 3.38235e-05 Jy ! Component: 200 - total flux cleaned = 5.44145e-06 Jy ! Total flux subtracted in 200 components = 5.44145e-06 Jy ! Clean residual min=-0.001438 max=0.001131 Jy/beam ! Clean residual mean=-0.000007 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0261619 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.0261619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.117672Jy sigma=0.430335 ! Fit after self-cal, rms=0.117650Jy sigma=0.430144 wmodel J0445+5124_S_map.mod ! Writing 76 model components to file: J0445+5124_S_map.mod wobs J0445+5124_S_uvs.fits ! Writing UV FITS file: J0445+5124_S_uvs.fits wwins J0445+5124_S_map.win ! wwins: Wrote 2 windows to J0445+5124_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627348 Jy ! Component: 100 - total flux cleaned = -0.000756805 Jy ! Component: 150 - total flux cleaned = -0.000815576 Jy ! Component: 200 - total flux cleaned = -0.000888519 Jy ! Component: 250 - total flux cleaned = -0.00095592 Jy ! Component: 300 - total flux cleaned = -0.00101984 Jy ! Component: 350 - total flux cleaned = -0.00106562 Jy ! Component: 400 - total flux cleaned = -0.00109517 Jy ! Component: 450 - total flux cleaned = -0.00109554 Jy ! Component: 500 - total flux cleaned = -0.00104264 Jy ! Component: 550 - total flux cleaned = -0.000991239 Jy ! Component: 600 - total flux cleaned = -0.000916528 Jy ! Component: 650 - total flux cleaned = -0.00084381 Jy ! Component: 700 - total flux cleaned = -0.000843874 Jy ! Component: 750 - total flux cleaned = -0.000832177 Jy ! Component: 800 - total flux cleaned = -0.000843539 Jy ! Component: 850 - total flux cleaned = -0.0008438 Jy ! Component: 900 - total flux cleaned = -0.000832913 Jy ! Component: 950 - total flux cleaned = -0.000832918 Jy ! Component: 1000 - total flux cleaned = -0.000801505 Jy ! Component: 1050 - total flux cleaned = -0.000801703 Jy ! Component: 1100 - total flux cleaned = -0.000781429 Jy ! Component: 1150 - total flux cleaned = -0.000731541 Jy ! Component: 1200 - total flux cleaned = -0.000721656 Jy ! Component: 1250 - total flux cleaned = -0.000673078 Jy ! Component: 1300 - total flux cleaned = -0.000634686 Jy ! Component: 1350 - total flux cleaned = -0.000578178 Jy ! Component: 1400 - total flux cleaned = -0.000550314 Jy ! Component: 1450 - total flux cleaned = -0.000531793 Jy ! Component: 1500 - total flux cleaned = -0.000459489 Jy ! Component: 1550 - total flux cleaned = -0.000450616 Jy ! Component: 1600 - total flux cleaned = -0.000415305 Jy ! Component: 1650 - total flux cleaned = -0.000363121 Jy ! Component: 1700 - total flux cleaned = -0.000328758 Jy ! Component: 1750 - total flux cleaned = -0.000294751 Jy ! Component: 1800 - total flux cleaned = -0.00029477 Jy ! Component: 1850 - total flux cleaned = -0.000261312 Jy ! Component: 1900 - total flux cleaned = -0.000244702 Jy ! Component: 1950 - total flux cleaned = -0.000236532 Jy ! Component: 2000 - total flux cleaned = -0.000228463 Jy ! Component: 2050 - total flux cleaned = -0.000228494 Jy ! Component: 2100 - total flux cleaned = -0.000252389 Jy ! Component: 2150 - total flux cleaned = -0.000244471 Jy ! Component: 2200 - total flux cleaned = -0.000244481 Jy ! Component: 2250 - total flux cleaned = -0.00027569 Jy ! Component: 2300 - total flux cleaned = -0.000283432 Jy ! Component: 2350 - total flux cleaned = -0.000298831 Jy ! Component: 2400 - total flux cleaned = -0.000314124 Jy ! Component: 2450 - total flux cleaned = -0.00031409 Jy ! Component: 2500 - total flux cleaned = -0.00031414 Jy ! Component: 2550 - total flux cleaned = -0.000351649 Jy ! Component: 2600 - total flux cleaned = -0.000366568 Jy ! Component: 2650 - total flux cleaned = -0.000381424 Jy ! Component: 2700 - total flux cleaned = -0.00039622 Jy ! Component: 2750 - total flux cleaned = -0.000418284 Jy ! Component: 2800 - total flux cleaned = -0.000440197 Jy ! Component: 2850 - total flux cleaned = -0.000440179 Jy ! Component: 2900 - total flux cleaned = -0.000461881 Jy ! Component: 2950 - total flux cleaned = -0.000490663 Jy ! Component: 3000 - total flux cleaned = -0.000497791 Jy ! Component: 3050 - total flux cleaned = -0.0005049 Jy ! Component: 3100 - total flux cleaned = -0.000519094 Jy ! Component: 3150 - total flux cleaned = -0.000519058 Jy ! Component: 3200 - total flux cleaned = -0.000533167 Jy ! Component: 3250 - total flux cleaned = -0.000561263 Jy ! Component: 3300 - total flux cleaned = -0.000575251 Jy ! Component: 3350 - total flux cleaned = -0.000589208 Jy ! Component: 3400 - total flux cleaned = -0.000596179 Jy ! Component: 3450 - total flux cleaned = -0.000616998 Jy ! Component: 3500 - total flux cleaned = -0.000630861 Jy ! Component: 3550 - total flux cleaned = -0.000644648 Jy ! Component: 3600 - total flux cleaned = -0.000623997 Jy ! Component: 3650 - total flux cleaned = -0.000617101 Jy ! Component: 3700 - total flux cleaned = -0.00063084 Jy ! Component: 3750 - total flux cleaned = -0.000637649 Jy ! Component: 3800 - total flux cleaned = -0.000617164 Jy ! Component: 3850 - total flux cleaned = -0.000617164 Jy ! Component: 3900 - total flux cleaned = -0.000603567 Jy ! Component: 3950 - total flux cleaned = -0.000603545 Jy ! Component: 4000 - total flux cleaned = -0.000589986 Jy ! Component: 4050 - total flux cleaned = -0.000576419 Jy ! Total flux subtracted in 4096 components = -0.000562846 Jy ! Clean residual min=-0.000541 max=0.000386 Jy/beam ! Clean residual mean=-0.000001 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.0255991 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 335 components and 0.0255991 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0445+5124_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.178 x 9.236 at 0.837 degrees (North through East) ! Clean map min=-0.0048029 max=0.034596 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0445+5124_S_map.fits wmodel /image_prod/ug002_uva//J0445+5124_S_map.mod ! Writing 335 model components to file: /image_prod/ug002_uva//J0445+5124_S_map.mod wobs /image_prod/ug002_uva//J0445+5124_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0445+5124_S_uvs.fits wwins /image_prod/ug002_uva//J0445+5124_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0445+5124_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0345963 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000119902 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03973 1.03973 2.07945 4.1589 8.3178 16.6356 33.2712 66.5424 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 288.537 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0445+5124_S_dfm.log closed on Wed Mar 4 20:27:49 2020