! Started logfile: /image_prod/ug002_uva//J0439+3045_X_dfm.log on Wed Mar  4 20:25:59 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0439+3045_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0439+3045_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.975926 visibilities/baseline/integration-bin.
! Found source: J0439+3045
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25296 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0439+3045_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.035322Jy  sigma=9.055932
! Fit after  self-cal, rms=0.753740Jy  sigma=6.611427
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7095 mas, bmaj=1.479 mas, bpa=3.682 degrees
! Estimated noise=0.944412 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181377 Jy
! Component: 100  -  total flux cleaned = 0.229091 Jy
! Total flux subtracted in 100 components = 0.229091 Jy
! Clean residual min=-0.008934 max=0.023291 Jy/beam
! Clean residual mean=0.000008 rms=0.002675 Jy/beam
! Combined flux in latest and established models = 0.229091 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.229091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085022Jy  sigma=0.728319
! Fit after  self-cal, rms=0.084978Jy  sigma=0.727968
! Inverting map 
! Added new window around map position (-1.2, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.025857 Jy
! Component: 100  -  total flux cleaned = 0.0427944 Jy
! Total flux subtracted in 100 components = 0.0427944 Jy
! Clean residual min=-0.007911 max=0.015334 Jy/beam
! Clean residual mean=0.000001 rms=0.002035 Jy/beam
! Combined flux in latest and established models = 0.271886 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.271886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072376Jy  sigma=0.617538
! Fit after  self-cal, rms=0.071811Jy  sigma=0.612137
! Inverting map 
! Added new window around map position (1.8, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149472 Jy
! Component: 100  -  total flux cleaned = 0.0257399 Jy
! Total flux subtracted in 100 components = 0.0257399 Jy
! Clean residual min=-0.006657 max=0.009562 Jy/beam
! Clean residual mean=-0.000003 rms=0.001704 Jy/beam
! Combined flux in latest and established models = 0.297626 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.297626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067074Jy  sigma=0.569612
! Fit after  self-cal, rms=0.067005Jy  sigma=0.569027
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=1.84 mas, bpa=3.862 degrees
! Estimated noise=0.5146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122655 Jy
! Component: 100  -  total flux cleaned = 0.0202859 Jy
! Component: 150  -  total flux cleaned = 0.0246529 Jy
! Component: 200  -  total flux cleaned = 0.0267359 Jy
! Total flux subtracted in 200 components = 0.0267359 Jy
! Clean residual min=-0.007149 max=0.009499 Jy/beam
! Clean residual mean=-0.000009 rms=0.001905 Jy/beam
! Combined flux in latest and established models = 0.324362 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 35 components and 0.324362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064267Jy  sigma=0.545265
! Fit after  self-cal, rms=0.064252Jy  sigma=0.545137
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9165 x 1.84 at 3.862 degrees (North through East)
! Clean map  min=-0.0068861  max=0.23525 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     KP        1.13     LA        1.00     
!   MK        1.04     NL        1.17     OV        0.93     PT        0.89     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     KP        1.10     LA        1.01     
!   MK        1.02     NL        1.20     OV        0.93     PT        0.90     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     KP        1.10     LA        1.00     
!   MK        1.03     NL        1.18     OV        0.93     PT        0.90     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     KP        1.09     LA        1.01     
!   MK        1.03     NL        1.16     OV        0.92     PT        0.91     
!   SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     KP        1.11     LA        1.00     
!   MK        1.02     NL        1.16     OV        0.91     PT        0.91     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     KP        1.12     LA        1.02     
!   MK        1.03     NL        1.16     OV        0.93     PT        0.90     
!   SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     KP        1.11     LA        1.00     
!   MK        1.01     NL        1.18     OV        0.91     PT        0.90     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     KP        1.10     LA        1.00     
!   MK        1.04     NL        1.17     OV        0.93     PT        0.89     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     KP        1.09     LA        0.98     
!   MK        1.01     NL        1.19     OV        0.91     PT        0.91     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     KP        1.10     LA        1.00     
!   MK        1.04     NL        1.16     OV        0.92     PT        0.90     
!   SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     KP        1.08     LA        1.01     
!   MK        0.98     NL        1.15     OV        0.93     PT        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     KP        1.10     LA        1.02     
!   MK        1.02     NL        1.17     OV        0.91     PT        0.92     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.064252Jy  sigma=0.545137
! Fit after  self-cal, rms=0.058387Jy  sigma=0.496508
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9153 mas, bmaj=1.84 mas, bpa=5.002 degrees
! Estimated noise=0.516305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00481712 Jy
! Component: 100  -  total flux cleaned = -0.00568593 Jy
! Component: 150  -  total flux cleaned = -0.00637044 Jy
! Component: 200  -  total flux cleaned = -0.00692484 Jy
! Total flux subtracted in 200 components = -0.00692484 Jy
! Clean residual min=-0.005727 max=0.006036 Jy/beam
! Clean residual mean=-0.000000 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 0.317437 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.317437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057747Jy  sigma=0.490348
! Fit after  self-cal, rms=0.057761Jy  sigma=0.490190
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057761Jy  sigma=0.490190
! Fit after  self-cal, rms=0.054993Jy  sigma=0.457624
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9135 mas, bmaj=1.851 mas, bpa=5.083 degrees
! Estimated noise=0.517321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00425657 Jy
! Component: 100  -  total flux cleaned = -0.00554852 Jy
! Component: 150  -  total flux cleaned = -0.00593465 Jy
! Component: 200  -  total flux cleaned = -0.00617829 Jy
! Total flux subtracted in 200 components = -0.00617829 Jy
! Clean residual min=-0.002800 max=0.003913 Jy/beam
! Clean residual mean=0.000000 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.311259 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.311259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054609Jy  sigma=0.454319
! Fit after  self-cal, rms=0.054627Jy  sigma=0.454103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345791 Jy
! Component: 100  -  total flux cleaned = 0.00346027 Jy
! Component: 150  -  total flux cleaned = 0.00352305 Jy
! Component: 200  -  total flux cleaned = 0.00362286 Jy
! Total flux subtracted in 200 components = 0.00362286 Jy
! Clean residual min=-0.002323 max=0.001950 Jy/beam
! Clean residual mean=-0.000000 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.314881 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 82 components and 0.314881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054375Jy  sigma=0.451902
! Fit after  self-cal, rms=0.054359Jy  sigma=0.451764
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054359Jy  sigma=0.451764
! Fit after  self-cal, rms=0.054417Jy  sigma=0.450912
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9127 mas, bmaj=1.853 mas, bpa=5.128 degrees
! Estimated noise=0.517233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183899 Jy
! Component: 100  -  total flux cleaned = -0.00192171 Jy
! Component: 150  -  total flux cleaned = -0.00170097 Jy
! Component: 200  -  total flux cleaned = -0.00150753 Jy
! Total flux subtracted in 200 components = -0.00150753 Jy
! Clean residual min=-0.001934 max=0.001471 Jy/beam
! Clean residual mean=-0.000000 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.313374 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.313374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054266Jy  sigma=0.449728
! Fit after  self-cal, rms=0.054266Jy  sigma=0.449694
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229231 Jy
! Component: 100  -  total flux cleaned = 0.000271692 Jy
! Component: 150  -  total flux cleaned = 0.000309008 Jy
! Component: 200  -  total flux cleaned = 0.000343379 Jy
! Total flux subtracted in 200 components = 0.000343379 Jy
! Clean residual min=-0.001738 max=0.001417 Jy/beam
! Clean residual mean=-0.000000 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.313717 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.313717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054211Jy  sigma=0.449285
! Fit after  self-cal, rms=0.054209Jy  sigma=0.449274
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054209Jy  sigma=0.449274
! Fit after  self-cal, rms=0.054276Jy  sigma=0.448958
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=3.007 mas, bpa=12.11 degrees
! Estimated noise=0.647085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103059 Jy
! Component: 100  -  total flux cleaned = -0.00110898 Jy
! Component: 150  -  total flux cleaned = -0.00102254 Jy
! Component: 200  -  total flux cleaned = -0.000999556 Jy
! Total flux subtracted in 200 components = -0.000999556 Jy
! Clean residual min=-0.001273 max=0.001219 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.312718 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 113 components and 0.312718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054237Jy  sigma=0.448636
! Fit after  self-cal, rms=0.054236Jy  sigma=0.448616
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.06814e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113419 Jy
! Component: 150  -  total flux cleaned = 0.000114066 Jy
! Component: 200  -  total flux cleaned = 9.8417e-05 Jy
! Total flux subtracted in 200 components = 9.8417e-05 Jy
! Clean residual min=-0.001245 max=0.001183 Jy/beam
! Clean residual mean=-0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.312816 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 116 components and 0.312816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054225Jy  sigma=0.448509
! Fit after  self-cal, rms=0.054223Jy  sigma=0.448495
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9121 mas, bmaj=1.853 mas, bpa=5.098 degrees
! Estimated noise=0.517199 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9121 x 1.853 at 5.098 degrees (North through East)
! Clean map  min=-0.0014318  max=0.23623 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7042 mas, bmaj=1.489 mas, bpa=5.208 degrees
! Estimated noise=0.957942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.183778 Jy
! Component: 100  -  total flux cleaned = 0.231362 Jy
! Component: 150  -  total flux cleaned = 0.253182 Jy
! Component: 200  -  total flux cleaned = 0.266518 Jy
! Total flux subtracted in 200 components = 0.266518 Jy
! Clean residual min=-0.003246 max=0.007044 Jy/beam
! Clean residual mean=0.000006 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.266519 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.266519 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9121 mas, bmaj=1.853 mas, bpa=5.098 degrees
! Estimated noise=0.517199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139781 Jy
! Component: 100  -  total flux cleaned = 0.0222464 Jy
! Component: 150  -  total flux cleaned = 0.0280934 Jy
! Component: 200  -  total flux cleaned = 0.0324698 Jy
! Total flux subtracted in 200 components = 0.0324698 Jy
! Clean residual min=-0.001863 max=0.003212 Jy/beam
! Clean residual mean=0.000001 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.298988 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 44 components and 0.298988 Jy
! Inverting map 
! Added new window around map position (-2.8, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353498 Jy
! Component: 100  -  total flux cleaned = 0.00616475 Jy
! Component: 150  -  total flux cleaned = 0.00824105 Jy
! Component: 200  -  total flux cleaned = 0.00991488 Jy
! Total flux subtracted in 200 components = 0.00991488 Jy
! Clean residual min=-0.001583 max=0.001686 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.308903 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 75 components and 0.308903 Jy
! Inverting map 
! Added new window around map position (5.6, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151569 Jy
! Component: 100  -  total flux cleaned = 0.00222005 Jy
! Component: 150  -  total flux cleaned = 0.00275492 Jy
! Component: 200  -  total flux cleaned = 0.00311611 Jy
! Total flux subtracted in 200 components = 0.00311611 Jy
! Clean residual min=-0.001464 max=0.001256 Jy/beam
! Clean residual mean=0.000000 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.312019 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 90 components and 0.312019 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=3.007 mas, bpa=12.11 degrees
! Estimated noise=0.647085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129682 Jy
! Component: 100  -  total flux cleaned = 0.00161893 Jy
! Component: 150  -  total flux cleaned = 0.0018443 Jy
! Component: 200  -  total flux cleaned = 0.0019635 Jy
! Total flux subtracted in 200 components = 0.0019635 Jy
! Clean residual min=-0.001286 max=0.001332 Jy/beam
! Clean residual mean=0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.313983 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.31486e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100509 Jy
! Component: 150  -  total flux cleaned = 0.000100513 Jy
! Component: 200  -  total flux cleaned = 0.000100983 Jy
! Total flux subtracted in 200 components = 0.000100983 Jy
! Clean residual min=-0.001226 max=0.001266 Jy/beam
! Clean residual mean=0.000000 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.314084 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 130 components and 0.314084 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9121 mas, bmaj=1.853 mas, bpa=5.098 degrees
! Estimated noise=0.517199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.38718e-05 Jy
! Component: 100  -  total flux cleaned = -0.000115048 Jy
! Component: 150  -  total flux cleaned = -0.00014227 Jy
! Component: 200  -  total flux cleaned = -0.000191816 Jy
! Total flux subtracted in 200 components = -0.000191816 Jy
! Clean residual min=-0.001346 max=0.001166 Jy/beam
! Clean residual mean=0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.313892 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 143 components and 0.313892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054068Jy  sigma=0.447575
! Fit after  self-cal, rms=0.054052Jy  sigma=0.447477
wmodel J0439+3045_X_map.mod
! Writing 143 model components to file: J0439+3045_X_map.mod
wobs   J0439+3045_X_uvs.fits
! Writing UV FITS file: J0439+3045_X_uvs.fits
wwins  J0439+3045_X_map.win
! wwins: Wrote 6 windows to J0439+3045_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000436675 Jy
! Component: 100  -  total flux cleaned = -0.000631129 Jy
! Component: 150  -  total flux cleaned = -0.000856766 Jy
! Component: 200  -  total flux cleaned = -0.000995743 Jy
! Component: 250  -  total flux cleaned = -0.001092 Jy
! Component: 300  -  total flux cleaned = -0.00111087 Jy
! Component: 350  -  total flux cleaned = -0.00112949 Jy
! Component: 400  -  total flux cleaned = -0.00118243 Jy
! Component: 450  -  total flux cleaned = -0.00114769 Jy
! Component: 500  -  total flux cleaned = -0.00108046 Jy
! Component: 550  -  total flux cleaned = -0.00103084 Jy
! Component: 600  -  total flux cleaned = -0.000965627 Jy
! Component: 650  -  total flux cleaned = -0.000901664 Jy
! Component: 700  -  total flux cleaned = -0.000870251 Jy
! Component: 750  -  total flux cleaned = -0.000808483 Jy
! Component: 800  -  total flux cleaned = -0.000793404 Jy
! Component: 850  -  total flux cleaned = -0.000763126 Jy
! Component: 900  -  total flux cleaned = -0.000689102 Jy
! Component: 950  -  total flux cleaned = -0.000659735 Jy
! Component: 1000  -  total flux cleaned = -0.000587689 Jy
! Component: 1050  -  total flux cleaned = -0.000601729 Jy
! Component: 1100  -  total flux cleaned = -0.000489136 Jy
! Component: 1150  -  total flux cleaned = -0.000419775 Jy
! Component: 1200  -  total flux cleaned = -0.000392292 Jy
! Component: 1250  -  total flux cleaned = -0.000311073 Jy
! Component: 1300  -  total flux cleaned = -0.000271247 Jy
! Component: 1350  -  total flux cleaned = -0.000271214 Jy
! Component: 1400  -  total flux cleaned = -0.000231867 Jy
! Component: 1450  -  total flux cleaned = -0.000206 Jy
! Component: 1500  -  total flux cleaned = -0.000167487 Jy
! Component: 1550  -  total flux cleaned = -0.000142178 Jy
! Component: 1600  -  total flux cleaned = -0.000104602 Jy
! Component: 1650  -  total flux cleaned = -5.4953e-05 Jy
! Component: 1700  -  total flux cleaned = -5.49744e-05 Jy
! Component: 1750  -  total flux cleaned = 6.06441e-06 Jy
! Component: 1800  -  total flux cleaned = 4.19958e-05 Jy
! Component: 1850  -  total flux cleaned = 5.38458e-05 Jy
! Component: 1900  -  total flux cleaned = 5.37237e-05 Jy
! Component: 1950  -  total flux cleaned = 6.53402e-05 Jy
! Component: 2000  -  total flux cleaned = 3.05266e-05 Jy
! Component: 2050  -  total flux cleaned = 6.52465e-05 Jy
! Component: 2100  -  total flux cleaned = 0.000110839 Jy
! Component: 2150  -  total flux cleaned = 8.81853e-05 Jy
! Component: 2200  -  total flux cleaned = 7.68936e-05 Jy
! Component: 2250  -  total flux cleaned = 9.91352e-05 Jy
! Component: 2300  -  total flux cleaned = 8.80764e-05 Jy
! Component: 2350  -  total flux cleaned = 0.000109857 Jy
! Component: 2400  -  total flux cleaned = 9.89982e-05 Jy
! Component: 2450  -  total flux cleaned = 9.91289e-05 Jy
! Component: 2500  -  total flux cleaned = 0.000141788 Jy
! Component: 2550  -  total flux cleaned = 9.9306e-05 Jy
! Component: 2600  -  total flux cleaned = 8.89056e-05 Jy
! Component: 2650  -  total flux cleaned = 0.000109832 Jy
! Component: 2700  -  total flux cleaned = 0.000151234 Jy
! Component: 2750  -  total flux cleaned = 0.000140925 Jy
! Component: 2800  -  total flux cleaned = 0.000181713 Jy
! Component: 2850  -  total flux cleaned = 0.000131002 Jy
! Component: 2900  -  total flux cleaned = 0.000120948 Jy
! Component: 2950  -  total flux cleaned = 0.000101043 Jy
! Component: 3000  -  total flux cleaned = 0.000140798 Jy
! Component: 3050  -  total flux cleaned = 0.000120922 Jy
! Component: 3100  -  total flux cleaned = 0.000120945 Jy
! Component: 3150  -  total flux cleaned = 0.000159878 Jy
! Component: 3200  -  total flux cleaned = 0.000130847 Jy
! Component: 3250  -  total flux cleaned = 0.000130861 Jy
! Component: 3300  -  total flux cleaned = 0.000130916 Jy
! Component: 3350  -  total flux cleaned = 0.000149861 Jy
! Component: 3400  -  total flux cleaned = 0.000159283 Jy
! Component: 3450  -  total flux cleaned = 0.000159336 Jy
! Component: 3500  -  total flux cleaned = 0.000168649 Jy
! Component: 3550  -  total flux cleaned = 0.000150186 Jy
! Component: 3600  -  total flux cleaned = 0.0001595 Jy
! Component: 3650  -  total flux cleaned = 0.000159489 Jy
! Component: 3700  -  total flux cleaned = 0.0001777 Jy
! Component: 3750  -  total flux cleaned = 0.000195697 Jy
! Component: 3800  -  total flux cleaned = 0.000195652 Jy
! Component: 3850  -  total flux cleaned = 0.000195637 Jy
! Component: 3900  -  total flux cleaned = 0.00021335 Jy
! Component: 3950  -  total flux cleaned = 0.000266332 Jy
! Component: 4000  -  total flux cleaned = 0.000292767 Jy
! Component: 4050  -  total flux cleaned = 0.000345179 Jy
! Total flux subtracted in 4096 components = 0.000379949 Jy
! Clean residual min=-0.000433 max=0.000491 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.314272 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 465 components and 0.314272 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0439+3045_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9121 x 1.853 at 5.098 degrees (North through East)
! Clean map  min=-0.0011754  max=0.23863 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0439+3045_X_map.fits
wmodel /image_prod/ug002_uva//J0439+3045_X_map.mod
! Writing 465 model components to file: /image_prod/ug002_uva//J0439+3045_X_map.mod
wobs   /image_prod/ug002_uva//J0439+3045_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0439+3045_X_uvs.fits
wwins  /image_prod/ug002_uva//J0439+3045_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0439+3045_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.238627 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015156 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.19054 0.19054 0.381079 0.762159 1.52432 3.04864 6.09727 12.1945 24.3891 48.7782 97.5563
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.238 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1574.47 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0439+3045_X_dfm.log closed on Wed Mar  4 20:26:03 2020