! Started logfile: /image_prod/ug002_uva//J0438-2012_S_dfm.log on Wed Mar  4 20:25:44 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0438-2012_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0438-2012_S_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.894222 visibilities/baseline/integration-bin.
! Found source: J0438-2012
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6036 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0438-2012_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009780Jy  sigma=7.127466
! Fit after  self-cal, rms=0.899965Jy  sigma=6.237649
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.712 mas, bmaj=8.587 mas, bpa=-11.76 degrees
! Estimated noise=1.96511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0771515 Jy
! Component: 100  -  total flux cleaned = 0.11168 Jy
! Total flux subtracted in 100 components = 0.11168 Jy
! Clean residual min=-0.010464 max=0.024168 Jy/beam
! Clean residual mean=-0.000060 rms=0.003330 Jy/beam
! Combined flux in latest and established models = 0.11168 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.11168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085646Jy  sigma=0.594896
! Fit after  self-cal, rms=0.085032Jy  sigma=0.590882
! Inverting map 
! Added new window around map position (-4.5, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258151 Jy
! Component: 100  -  total flux cleaned = 0.0424524 Jy
! Total flux subtracted in 100 components = 0.0424524 Jy
! Clean residual min=-0.007185 max=0.013554 Jy/beam
! Clean residual mean=-0.000045 rms=0.002169 Jy/beam
! Combined flux in latest and established models = 0.154132 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.154132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074408Jy  sigma=0.491815
! Fit after  self-cal, rms=0.073930Jy  sigma=0.489342
! Inverting map 
! Added new window around map position (4, -7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143874 Jy
! Component: 100  -  total flux cleaned = 0.0240523 Jy
! Total flux subtracted in 100 components = 0.0240523 Jy
! Clean residual min=-0.005425 max=0.007031 Jy/beam
! Clean residual mean=-0.000035 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.178184 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.178184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070359Jy  sigma=0.454586
! Fit after  self-cal, rms=0.070262Jy  sigma=0.453738
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=10.1 mas, bpa=-10.36 degrees
! Estimated noise=1.33275 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110747 Jy
! Component: 100  -  total flux cleaned = 0.0180752 Jy
! Component: 150  -  total flux cleaned = 0.0229444 Jy
! Component: 200  -  total flux cleaned = 0.0264633 Jy
! Total flux subtracted in 200 components = 0.0264633 Jy
! Clean residual min=-0.004561 max=0.007533 Jy/beam
! Clean residual mean=-0.000041 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 0.204648 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 79 components and 0.204648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068554Jy  sigma=0.435828
! Fit after  self-cal, rms=0.068460Jy  sigma=0.435280
! Inverting map 
! Added new window around map position (-11, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0072698 Jy
! Component: 100  -  total flux cleaned = 0.0111429 Jy
! Component: 150  -  total flux cleaned = 0.0139462 Jy
! Component: 200  -  total flux cleaned = 0.0161379 Jy
! Total flux subtracted in 200 components = 0.0161379 Jy
! Clean residual min=-0.003763 max=0.004288 Jy/beam
! Clean residual mean=-0.000026 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.220786 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 119 components and 0.220786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067664Jy  sigma=0.428596
! Fit after  self-cal, rms=0.067584Jy  sigma=0.427843
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.299 x 10.1 at -10.36 degrees (North through East)
! Clean map  min=-0.0033929  max=0.094223 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        0.98     KP        0.98     
!   LA        1.00     MK        0.96     NL        0.99     OV        1.02     
!   PT        0.94     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.02     HN        1.09     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.02     OV        0.98     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.07     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.03     OV        0.97     
!   PT        0.98     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.067584Jy  sigma=0.427843
! Fit after  self-cal, rms=0.068801Jy  sigma=0.425863
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.314 mas, bmaj=10.14 mas, bpa=-10.42 degrees
! Estimated noise=1.338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00054847 Jy
! Component: 100  -  total flux cleaned = -5.03522e-06 Jy
! Component: 150  -  total flux cleaned = 5.007e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101274 Jy
! Total flux subtracted in 200 components = 0.000101274 Jy
! Clean residual min=-0.003399 max=0.003433 Jy/beam
! Clean residual mean=-0.000014 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.220887 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 139 components and 0.220887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068639Jy  sigma=0.424995
! Fit after  self-cal, rms=0.068638Jy  sigma=0.424814
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068638Jy  sigma=0.424814
! Fit after  self-cal, rms=0.069694Jy  sigma=0.424102
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.317 mas, bmaj=10.18 mas, bpa=-10.59 degrees
! Estimated noise=1.34164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000401982 Jy
! Component: 100  -  total flux cleaned = -0.000195587 Jy
! Component: 150  -  total flux cleaned = -0.000195792 Jy
! Component: 200  -  total flux cleaned = -0.000155841 Jy
! Total flux subtracted in 200 components = -0.000155841 Jy
! Clean residual min=-0.003203 max=0.003362 Jy/beam
! Clean residual mean=-0.000010 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.220731 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 158 components and 0.220731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069602Jy  sigma=0.423669
! Fit after  self-cal, rms=0.069594Jy  sigma=0.423577
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.09797e-06 Jy
! Component: 100  -  total flux cleaned = 0.000218832 Jy
! Component: 150  -  total flux cleaned = 0.000218776 Jy
! Component: 200  -  total flux cleaned = 0.000253258 Jy
! Total flux subtracted in 200 components = 0.000253258 Jy
! Clean residual min=-0.003116 max=0.003265 Jy/beam
! Clean residual mean=-0.000010 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.220984 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 166 components and 0.220984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069532Jy  sigma=0.423294
! Fit after  self-cal, rms=0.069518Jy  sigma=0.423233
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069518Jy  sigma=0.423233
! Fit after  self-cal, rms=0.070183Jy  sigma=0.423160
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=10.2 mas, bpa=-10.69 degrees
! Estimated noise=1.34259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000471339 Jy
! Component: 100  -  total flux cleaned = -0.000394168 Jy
! Component: 150  -  total flux cleaned = -0.000394356 Jy
! Component: 200  -  total flux cleaned = -0.000394693 Jy
! Total flux subtracted in 200 components = -0.000394693 Jy
! Clean residual min=-0.002991 max=0.003211 Jy/beam
! Clean residual mean=-0.000009 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.22059 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 173 components and 0.22059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070132Jy  sigma=0.422930
! Fit after  self-cal, rms=0.070126Jy  sigma=0.422882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.27925e-05 Jy
! Component: 100  -  total flux cleaned = 8.97984e-05 Jy
! Component: 150  -  total flux cleaned = 6.10623e-05 Jy
! Component: 200  -  total flux cleaned = 6.19571e-05 Jy
! Total flux subtracted in 200 components = 6.19571e-05 Jy
! Clean residual min=-0.002950 max=0.003140 Jy/beam
! Clean residual mean=-0.000009 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.220652 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 176 components and 0.220652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070086Jy  sigma=0.422714
! Fit after  self-cal, rms=0.070077Jy  sigma=0.422678
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070077Jy  sigma=0.422678
! Fit after  self-cal, rms=0.070162Jy  sigma=0.422671
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.885 mas, bmaj=19.1 mas, bpa=-2.796 degrees
! Estimated noise=1.59661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000863328 Jy
! Component: 100  -  total flux cleaned = 0.000990489 Jy
! Component: 150  -  total flux cleaned = 0.000940356 Jy
! Component: 200  -  total flux cleaned = 0.000919287 Jy
! Total flux subtracted in 200 components = 0.000919287 Jy
! Clean residual min=-0.002846 max=0.004244 Jy/beam
! Clean residual mean=-0.000013 rms=0.001190 Jy/beam
! Combined flux in latest and established models = 0.221571 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 186 components and 0.221571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070152Jy  sigma=0.422620
! Fit after  self-cal, rms=0.070139Jy  sigma=0.422581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.59996e-05 Jy
! Component: 100  -  total flux cleaned = 0.000196297 Jy
! Component: 150  -  total flux cleaned = 0.000196344 Jy
! Component: 200  -  total flux cleaned = 0.000213514 Jy
! Total flux subtracted in 200 components = 0.000213514 Jy
! Clean residual min=-0.002776 max=0.004239 Jy/beam
! Clean residual mean=-0.000012 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.221784 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 194 components and 0.221784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070128Jy  sigma=0.422546
! Fit after  self-cal, rms=0.070122Jy  sigma=0.422525
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=10.21 mas, bpa=-10.74 degrees
! Estimated noise=1.34216 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.316 x 10.21 at -10.74 degrees (North through East)
! Clean map  min=-0.0027646  max=0.094096 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.721 mas, bmaj=8.669 mas, bpa=-12.11 degrees
! Estimated noise=1.98093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0777412 Jy
! Component: 100  -  total flux cleaned = 0.115913 Jy
! Component: 150  -  total flux cleaned = 0.140251 Jy
! Component: 200  -  total flux cleaned = 0.15733 Jy
! Total flux subtracted in 200 components = 0.15733 Jy
! Clean residual min=-0.006256 max=0.009646 Jy/beam
! Clean residual mean=-0.000036 rms=0.001984 Jy/beam
! Combined flux in latest and established models = 0.15733 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.15733 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=10.21 mas, bpa=-10.74 degrees
! Estimated noise=1.34216 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018067 Jy
! Component: 100  -  total flux cleaned = 0.0299183 Jy
! Component: 150  -  total flux cleaned = 0.0382571 Jy
! Component: 200  -  total flux cleaned = 0.0444667 Jy
! Total flux subtracted in 200 components = 0.0444667 Jy
! Clean residual min=-0.004318 max=0.004546 Jy/beam
! Clean residual mean=-0.000025 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.201797 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 109 components and 0.201797 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.885 mas, bmaj=19.1 mas, bpa=-2.796 degrees
! Estimated noise=1.59661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00724552 Jy
! Component: 100  -  total flux cleaned = 0.0118528 Jy
! Component: 150  -  total flux cleaned = 0.0149596 Jy
! Component: 200  -  total flux cleaned = 0.0169802 Jy
! Total flux subtracted in 200 components = 0.0169802 Jy
! Clean residual min=-0.003352 max=0.004360 Jy/beam
! Clean residual mean=-0.000018 rms=0.001274 Jy/beam
! Combined flux in latest and established models = 0.218777 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000798155 Jy
! Component: 100  -  total flux cleaned = 0.00133845 Jy
! Component: 150  -  total flux cleaned = 0.00174832 Jy
! Component: 200  -  total flux cleaned = 0.0019453 Jy
! Total flux subtracted in 200 components = 0.0019453 Jy
! Clean residual min=-0.003060 max=0.004356 Jy/beam
! Clean residual mean=-0.000014 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 0.220722 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 179 components and 0.220722 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=10.21 mas, bpa=-10.74 degrees
! Estimated noise=1.34216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.32434e-05 Jy
! Component: 100  -  total flux cleaned = -0.000172231 Jy
! Component: 150  -  total flux cleaned = -0.000300279 Jy
! Component: 200  -  total flux cleaned = -0.000417909 Jy
! Total flux subtracted in 200 components = -0.000417909 Jy
! Clean residual min=-0.003060 max=0.003288 Jy/beam
! Clean residual mean=-0.000008 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.220304 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 201 components and 0.220304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070251Jy  sigma=0.423412
! Fit after  self-cal, rms=0.070216Jy  sigma=0.423256
wmodel J0438-2012_S_map.mod
! Writing 201 model components to file: J0438-2012_S_map.mod
wobs   J0438-2012_S_uvs.fits
! Writing UV FITS file: J0438-2012_S_uvs.fits
wwins  J0438-2012_S_map.win
! wwins: Wrote 4 windows to J0438-2012_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117201 Jy
! Component: 100  -  total flux cleaned = 0.00169482 Jy
! Component: 150  -  total flux cleaned = 0.00207911 Jy
! Component: 200  -  total flux cleaned = 0.00207816 Jy
! Component: 250  -  total flux cleaned = 0.00186349 Jy
! Component: 300  -  total flux cleaned = 0.00165879 Jy
! Component: 350  -  total flux cleaned = 0.00161985 Jy
! Component: 400  -  total flux cleaned = 0.00165755 Jy
! Component: 450  -  total flux cleaned = 0.00173102 Jy
! Component: 500  -  total flux cleaned = 0.0018368 Jy
! Component: 550  -  total flux cleaned = 0.00183656 Jy
! Component: 600  -  total flux cleaned = 0.00196981 Jy
! Component: 650  -  total flux cleaned = 0.00203379 Jy
! Component: 700  -  total flux cleaned = 0.0020339 Jy
! Component: 750  -  total flux cleaned = 0.00218781 Jy
! Component: 800  -  total flux cleaned = 0.00224739 Jy
! Component: 850  -  total flux cleaned = 0.00230625 Jy
! Component: 900  -  total flux cleaned = 0.00242178 Jy
! Component: 950  -  total flux cleaned = 0.00256277 Jy
! Component: 1000  -  total flux cleaned = 0.00259014 Jy
! Component: 1050  -  total flux cleaned = 0.00269904 Jy
! Component: 1100  -  total flux cleaned = 0.00261812 Jy
! Component: 1150  -  total flux cleaned = 0.00264424 Jy
! Component: 1200  -  total flux cleaned = 0.00269598 Jy
! Component: 1250  -  total flux cleaned = 0.00279706 Jy
! Component: 1300  -  total flux cleaned = 0.00272206 Jy
! Component: 1350  -  total flux cleaned = 0.00289445 Jy
! Component: 1400  -  total flux cleaned = 0.00286993 Jy
! Component: 1450  -  total flux cleaned = 0.00291796 Jy
! Component: 1500  -  total flux cleaned = 0.00296481 Jy
! Component: 1550  -  total flux cleaned = 0.00291826 Jy
! Component: 1600  -  total flux cleaned = 0.00294103 Jy
! Component: 1650  -  total flux cleaned = 0.00294091 Jy
! Component: 1700  -  total flux cleaned = 0.00294106 Jy
! Component: 1750  -  total flux cleaned = 0.00294069 Jy
! Component: 1800  -  total flux cleaned = 0.00291912 Jy
! Component: 1850  -  total flux cleaned = 0.00289791 Jy
! Component: 1900  -  total flux cleaned = 0.00287702 Jy
! Component: 1950  -  total flux cleaned = 0.00287684 Jy
! Component: 2000  -  total flux cleaned = 0.00279441 Jy
! Component: 2050  -  total flux cleaned = 0.00281471 Jy
! Component: 2100  -  total flux cleaned = 0.00277466 Jy
! Component: 2150  -  total flux cleaned = 0.00269557 Jy
! Component: 2200  -  total flux cleaned = 0.002774 Jy
! Component: 2250  -  total flux cleaned = 0.00269638 Jy
! Component: 2300  -  total flux cleaned = 0.00269665 Jy
! Component: 2350  -  total flux cleaned = 0.00269677 Jy
! Component: 2400  -  total flux cleaned = 0.00269684 Jy
! Component: 2450  -  total flux cleaned = 0.0027154 Jy
! Component: 2500  -  total flux cleaned = 0.00273373 Jy
! Component: 2550  -  total flux cleaned = 0.00278831 Jy
! Component: 2600  -  total flux cleaned = 0.0028242 Jy
! Component: 2650  -  total flux cleaned = 0.00277108 Jy
! Component: 2700  -  total flux cleaned = 0.00278896 Jy
! Component: 2750  -  total flux cleaned = 0.00289338 Jy
! Component: 2800  -  total flux cleaned = 0.00292781 Jy
! Component: 2850  -  total flux cleaned = 0.00296181 Jy
! Component: 2900  -  total flux cleaned = 0.0029111 Jy
! Component: 2950  -  total flux cleaned = 0.00294433 Jy
! Component: 3000  -  total flux cleaned = 0.00292795 Jy
! Component: 3050  -  total flux cleaned = 0.00289506 Jy
! Component: 3100  -  total flux cleaned = 0.0029113 Jy
! Component: 3150  -  total flux cleaned = 0.00289534 Jy
! Component: 3200  -  total flux cleaned = 0.00297505 Jy
! Component: 3250  -  total flux cleaned = 0.00297497 Jy
! Component: 3300  -  total flux cleaned = 0.00300634 Jy
! Component: 3350  -  total flux cleaned = 0.00302182 Jy
! Component: 3400  -  total flux cleaned = 0.00303755 Jy
! Component: 3450  -  total flux cleaned = 0.00314447 Jy
! Component: 3500  -  total flux cleaned = 0.00312933 Jy
! Component: 3550  -  total flux cleaned = 0.00315944 Jy
! Component: 3600  -  total flux cleaned = 0.00318925 Jy
! Component: 3650  -  total flux cleaned = 0.00324847 Jy
! Component: 3700  -  total flux cleaned = 0.00326305 Jy
! Component: 3750  -  total flux cleaned = 0.00327768 Jy
! Component: 3800  -  total flux cleaned = 0.00330648 Jy
! Component: 3850  -  total flux cleaned = 0.00330659 Jy
! Component: 3900  -  total flux cleaned = 0.00333519 Jy
! Component: 3950  -  total flux cleaned = 0.00341973 Jy
! Component: 4000  -  total flux cleaned = 0.00343378 Jy
! Component: 4050  -  total flux cleaned = 0.00353096 Jy
! Total flux subtracted in 4096 components = 0.00358596 Jy
! Clean residual min=-0.000762 max=0.000779 Jy/beam
! Clean residual mean=0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.22389 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 505 components and 0.22389 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0438-2012_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.316 x 10.21 at -10.74 degrees (North through East)
! Clean map  min=-0.0017034  max=0.096117 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0438-2012_S_map.fits
wmodel /image_prod/ug002_uva//J0438-2012_S_map.mod
! Writing 505 model components to file: /image_prod/ug002_uva//J0438-2012_S_map.mod
wobs   /image_prod/ug002_uva//J0438-2012_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0438-2012_S_uvs.fits
wwins  /image_prod/ug002_uva//J0438-2012_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0438-2012_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0961172 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000253676 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.791772 0.791772 1.58354 3.16709 6.33417 12.6683 25.3367 50.6734
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  378.897 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0438-2012_S_dfm.log closed on Wed Mar  4 20:25:48 2020