! Started logfile: /image_prod/ug002_uva//J0437+2940_S_dfm.log on Wed Mar  4 20:24:42 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0437+2940_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0437+2940_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.910185 visibilities/baseline/integration-bin.
! Found source: J0437+2940
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5898 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0437+2940_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000247Jy  sigma=7.762512
! Fit after  self-cal, rms=0.933568Jy  sigma=7.244719
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.905 mas, bmaj=5.86 mas, bpa=-3.298 degrees
! Estimated noise=1.59438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0517281 Jy
! Component: 100  -  total flux cleaned = 0.0644903 Jy
! Total flux subtracted in 100 components = 0.0644903 Jy
! Clean residual min=-0.003865 max=0.005257 Jy/beam
! Clean residual mean=-0.000003 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.0644903 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0644903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070983Jy  sigma=0.472902
! Fit after  self-cal, rms=0.070518Jy  sigma=0.470557
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.379 mas, bmaj=6.359 mas, bpa=-3.053 degrees
! Estimated noise=1.23299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740469 Jy
! Component: 100  -  total flux cleaned = 0.0106892 Jy
! Component: 150  -  total flux cleaned = 0.0110881 Jy
! Component: 200  -  total flux cleaned = 0.0110349 Jy
! Total flux subtracted in 200 components = 0.0110349 Jy
! Clean residual min=-0.003045 max=0.004316 Jy/beam
! Clean residual mean=0.000001 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.0755252 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.0755252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069748Jy  sigma=0.464951
! Fit after  self-cal, rms=0.069728Jy  sigma=0.464744
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.379 x 6.359 at -3.053 degrees (North through East)
! Clean map  min=-0.0028406  max=0.068725 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.06     KP        0.93     
!   LA        1.00     MK        1.05     NL        0.99     OV        1.16     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.95     HN        1.06     KP        0.96     
!   LA        1.01     MK        0.95     NL        0.88     OV        1.17     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.04     KP        0.98     
!   LA        0.94     MK        0.92     NL        0.95     OV        1.19     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.069728Jy  sigma=0.464744
! Fit after  self-cal, rms=0.068752Jy  sigma=0.461280
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=6.371 mas, bpa=-3.568 degrees
! Estimated noise=1.22728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.21539e-05 Jy
! Component: 100  -  total flux cleaned = 4.71057e-05 Jy
! Component: 150  -  total flux cleaned = 1.77098e-05 Jy
! Component: 200  -  total flux cleaned = 1.76884e-05 Jy
! Total flux subtracted in 200 components = 1.76884e-05 Jy
! Clean residual min=-0.003048 max=0.003717 Jy/beam
! Clean residual mean=0.000004 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.0755428 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.0755428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068721Jy  sigma=0.461054
! Fit after  self-cal, rms=0.068736Jy  sigma=0.460843
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068736Jy  sigma=0.460843
! Fit after  self-cal, rms=0.068724Jy  sigma=0.454633
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=6.322 mas, bpa=-3.287 degrees
! Estimated noise=1.22376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.6441e-05 Jy
! Component: 100  -  total flux cleaned = 9.12827e-05 Jy
! Component: 150  -  total flux cleaned = 4.47111e-05 Jy
! Component: 200  -  total flux cleaned = 3.07332e-05 Jy
! Total flux subtracted in 200 components = 3.07332e-05 Jy
! Clean residual min=-0.002287 max=0.002608 Jy/beam
! Clean residual mean=0.000001 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0755736 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 35 components and 0.0755736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068712Jy  sigma=0.454540
! Fit after  self-cal, rms=0.068776Jy  sigma=0.454235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190915 Jy
! Component: 100  -  total flux cleaned = 0.00245822 Jy
! Component: 150  -  total flux cleaned = 0.00279708 Jy
! Component: 200  -  total flux cleaned = 0.0029537 Jy
! Total flux subtracted in 200 components = 0.0029537 Jy
! Clean residual min=-0.002279 max=0.002103 Jy/beam
! Clean residual mean=0.000002 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.0785273 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 62 components and 0.0785273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068640Jy  sigma=0.453441
! Fit after  self-cal, rms=0.068623Jy  sigma=0.453284
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068623Jy  sigma=0.453284
! Fit after  self-cal, rms=0.068154Jy  sigma=0.453074
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.373 mas, bmaj=6.295 mas, bpa=-3.073 degrees
! Estimated noise=1.22328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012673 Jy
! Component: 100  -  total flux cleaned = 0.00159392 Jy
! Component: 150  -  total flux cleaned = 0.00178616 Jy
! Component: 200  -  total flux cleaned = 0.00181175 Jy
! Total flux subtracted in 200 components = 0.00181175 Jy
! Clean residual min=-0.002289 max=0.001902 Jy/beam
! Clean residual mean=0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.080339 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 70 components and 0.0803391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068092Jy  sigma=0.452771
! Fit after  self-cal, rms=0.068077Jy  sigma=0.452700
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000521968 Jy
! Component: 100  -  total flux cleaned = 0.000547288 Jy
! Component: 150  -  total flux cleaned = 0.000503299 Jy
! Component: 200  -  total flux cleaned = 0.000483097 Jy
! Total flux subtracted in 200 components = 0.000483097 Jy
! Clean residual min=-0.002287 max=0.001871 Jy/beam
! Clean residual mean=0.000002 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.0808221 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 83 components and 0.0808222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068053Jy  sigma=0.452610
! Fit after  self-cal, rms=0.068055Jy  sigma=0.452598
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068055Jy  sigma=0.452598
! Fit after  self-cal, rms=0.067545Jy  sigma=0.452502
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.227 mas, bmaj=9.579 mas, bpa=-4.214 degrees
! Estimated noise=1.47288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000531226 Jy
! Component: 100  -  total flux cleaned = 0.000462493 Jy
! Component: 150  -  total flux cleaned = 0.000414169 Jy
! Component: 200  -  total flux cleaned = 0.000386966 Jy
! Total flux subtracted in 200 components = 0.000386966 Jy
! Clean residual min=-0.002333 max=0.001944 Jy/beam
! Clean residual mean=0.000002 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.0812091 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 92 components and 0.0812091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067526Jy  sigma=0.452475
! Fit after  self-cal, rms=0.067513Jy  sigma=0.452446
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122902 Jy
! Component: 100  -  total flux cleaned = 7.87824e-05 Jy
! Component: 150  -  total flux cleaned = 6.65156e-05 Jy
! Component: 200  -  total flux cleaned = 5.48194e-05 Jy
! Total flux subtracted in 200 components = 5.48194e-05 Jy
! Clean residual min=-0.002327 max=0.001939 Jy/beam
! Clean residual mean=0.000002 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0812639 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 95 components and 0.0812639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067509Jy  sigma=0.452478
! Fit after  self-cal, rms=0.067508Jy  sigma=0.452470
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.37 mas, bmaj=6.293 mas, bpa=-3.017 degrees
! Estimated noise=1.22285 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.37 x 6.293 at -3.017 degrees (North through East)
! Clean map  min=-0.0022472  max=0.067544 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.883 mas, bmaj=5.789 mas, bpa=-3.331 degrees
! Estimated noise=1.59317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516936 Jy
! Component: 100  -  total flux cleaned = 0.0651277 Jy
! Component: 150  -  total flux cleaned = 0.0716549 Jy
! Component: 200  -  total flux cleaned = 0.0758088 Jy
! Total flux subtracted in 200 components = 0.0758088 Jy
! Clean residual min=-0.002695 max=0.002707 Jy/beam
! Clean residual mean=-0.000001 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.0758087 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0758087 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.37 mas, bmaj=6.293 mas, bpa=-3.017 degrees
! Estimated noise=1.22285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00323185 Jy
! Component: 100  -  total flux cleaned = 0.00450033 Jy
! Component: 150  -  total flux cleaned = 0.00503151 Jy
! Component: 200  -  total flux cleaned = 0.00528337 Jy
! Total flux subtracted in 200 components = 0.00528337 Jy
! Clean residual min=-0.002203 max=0.001848 Jy/beam
! Clean residual mean=0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0810921 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.0810921 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.227 mas, bmaj=9.579 mas, bpa=-4.214 degrees
! Estimated noise=1.47288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000487426 Jy
! Component: 100  -  total flux cleaned = 0.000602609 Jy
! Component: 150  -  total flux cleaned = 0.000546679 Jy
! Component: 200  -  total flux cleaned = 0.000522912 Jy
! Total flux subtracted in 200 components = 0.000522912 Jy
! Clean residual min=-0.002296 max=0.001914 Jy/beam
! Clean residual mean=0.000002 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.081615 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.09271e-05 Jy
! Component: 100  -  total flux cleaned = -1.97173e-05 Jy
! Component: 150  -  total flux cleaned = -1.88681e-05 Jy
! Component: 200  -  total flux cleaned = -3.33226e-05 Jy
! Total flux subtracted in 200 components = -3.33226e-05 Jy
! Clean residual min=-0.002325 max=0.001918 Jy/beam
! Clean residual mean=0.000003 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0815817 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 73 components and 0.0815817 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.37 mas, bmaj=6.293 mas, bpa=-3.017 degrees
! Estimated noise=1.22285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014422 Jy
! Component: 100  -  total flux cleaned = 0.000296047 Jy
! Component: 150  -  total flux cleaned = 0.000362889 Jy
! Component: 200  -  total flux cleaned = 0.000362942 Jy
! Total flux subtracted in 200 components = 0.000362942 Jy
! Clean residual min=-0.002272 max=0.001771 Jy/beam
! Clean residual mean=0.000002 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.0819446 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.0819446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067520Jy  sigma=0.452580
! Fit after  self-cal, rms=0.067539Jy  sigma=0.452547
wmodel J0437+2940_S_map.mod
! Writing 86 model components to file: J0437+2940_S_map.mod
wobs   J0437+2940_S_uvs.fits
! Writing UV FITS file: J0437+2940_S_uvs.fits
wwins  J0437+2940_S_map.win
! wwins: Wrote 2 windows to J0437+2940_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000870215 Jy
! Component: 100  -  total flux cleaned = -0.00100032 Jy
! Component: 150  -  total flux cleaned = -0.0012193 Jy
! Component: 200  -  total flux cleaned = -0.00143081 Jy
! Component: 250  -  total flux cleaned = -0.001577 Jy
! Component: 300  -  total flux cleaned = -0.00174757 Jy
! Component: 350  -  total flux cleaned = -0.00191246 Jy
! Component: 400  -  total flux cleaned = -0.0020196 Jy
! Component: 450  -  total flux cleaned = -0.00220251 Jy
! Component: 500  -  total flux cleaned = -0.00230397 Jy
! Component: 550  -  total flux cleaned = -0.00240369 Jy
! Component: 600  -  total flux cleaned = -0.00240339 Jy
! Component: 650  -  total flux cleaned = -0.00254788 Jy
! Component: 700  -  total flux cleaned = -0.00252372 Jy
! Component: 750  -  total flux cleaned = -0.00250016 Jy
! Component: 800  -  total flux cleaned = -0.0024999 Jy
! Component: 850  -  total flux cleaned = -0.00252193 Jy
! Component: 900  -  total flux cleaned = -0.00252175 Jy
! Component: 950  -  total flux cleaned = -0.00249977 Jy
! Component: 1000  -  total flux cleaned = -0.00252134 Jy
! Component: 1050  -  total flux cleaned = -0.00245753 Jy
! Component: 1100  -  total flux cleaned = -0.00241615 Jy
! Component: 1150  -  total flux cleaned = -0.00241597 Jy
! Component: 1200  -  total flux cleaned = -0.00237556 Jy
! Component: 1250  -  total flux cleaned = -0.00235576 Jy
! Component: 1300  -  total flux cleaned = -0.00237612 Jy
! Component: 1350  -  total flux cleaned = -0.00237582 Jy
! Component: 1400  -  total flux cleaned = -0.00231798 Jy
! Component: 1450  -  total flux cleaned = -0.00229877 Jy
! Component: 1500  -  total flux cleaned = -0.00226109 Jy
! Component: 1550  -  total flux cleaned = -0.0022607 Jy
! Component: 1600  -  total flux cleaned = -0.00213175 Jy
! Component: 1650  -  total flux cleaned = -0.00213213 Jy
! Component: 1700  -  total flux cleaned = -0.00205994 Jy
! Component: 1750  -  total flux cleaned = -0.00207756 Jy
! Component: 1800  -  total flux cleaned = -0.00195333 Jy
! Component: 1850  -  total flux cleaned = -0.00191836 Jy
! Component: 1900  -  total flux cleaned = -0.00186635 Jy
! Component: 1950  -  total flux cleaned = -0.00181462 Jy
! Component: 2000  -  total flux cleaned = -0.0017806 Jy
! Component: 2050  -  total flux cleaned = -0.0016796 Jy
! Component: 2100  -  total flux cleaned = -0.0016795 Jy
! Component: 2150  -  total flux cleaned = -0.00161314 Jy
! Component: 2200  -  total flux cleaned = -0.00148194 Jy
! Component: 2250  -  total flux cleaned = -0.00144958 Jy
! Component: 2300  -  total flux cleaned = -0.00143344 Jy
! Component: 2350  -  total flux cleaned = -0.00138568 Jy
! Component: 2400  -  total flux cleaned = -0.00129084 Jy
! Component: 2450  -  total flux cleaned = -0.00127529 Jy
! Component: 2500  -  total flux cleaned = -0.00124392 Jy
! Component: 2550  -  total flux cleaned = -0.00118199 Jy
! Component: 2600  -  total flux cleaned = -0.00110556 Jy
! Component: 2650  -  total flux cleaned = -0.00102991 Jy
! Component: 2700  -  total flux cleaned = -0.000969676 Jy
! Component: 2750  -  total flux cleaned = -0.000880486 Jy
! Component: 2800  -  total flux cleaned = -0.000850934 Jy
! Component: 2850  -  total flux cleaned = -0.000733651 Jy
! Component: 2900  -  total flux cleaned = -0.000704559 Jy
! Component: 2950  -  total flux cleaned = -0.00061792 Jy
! Component: 3000  -  total flux cleaned = -0.000575148 Jy
! Component: 3050  -  total flux cleaned = -0.000546777 Jy
! Component: 3100  -  total flux cleaned = -0.000532657 Jy
! Component: 3150  -  total flux cleaned = -0.000476496 Jy
! Component: 3200  -  total flux cleaned = -0.000406992 Jy
! Component: 3250  -  total flux cleaned = -0.0003931 Jy
! Component: 3300  -  total flux cleaned = -0.000379318 Jy
! Component: 3350  -  total flux cleaned = -0.000324813 Jy
! Component: 3400  -  total flux cleaned = -0.000243931 Jy
! Component: 3450  -  total flux cleaned = -0.00024382 Jy
! Component: 3500  -  total flux cleaned = -0.000243795 Jy
! Component: 3550  -  total flux cleaned = -0.000177764 Jy
! Component: 3600  -  total flux cleaned = -0.000177668 Jy
! Component: 3650  -  total flux cleaned = -0.000190761 Jy
! Component: 3700  -  total flux cleaned = -0.000138879 Jy
! Component: 3750  -  total flux cleaned = -0.000138938 Jy
! Component: 3800  -  total flux cleaned = -0.000126174 Jy
! Component: 3850  -  total flux cleaned = -7.53654e-05 Jy
! Component: 3900  -  total flux cleaned = -7.54132e-05 Jy
! Component: 3950  -  total flux cleaned = -8.79651e-05 Jy
! Component: 4000  -  total flux cleaned = -8.79065e-05 Jy
! Component: 4050  -  total flux cleaned = -3.82613e-05 Jy
! Total flux subtracted in 4096 components = -7.53146e-05 Jy
! Clean residual min=-0.000868 max=0.000916 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0818693 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 373 components and 0.0818694 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0437+2940_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.37 x 6.293 at -3.017 degrees (North through East)
! Clean map  min=-0.002027  max=0.06716 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0437+2940_S_map.fits
wmodel /image_prod/ug002_uva//J0437+2940_S_map.mod
! Writing 373 model components to file: /image_prod/ug002_uva//J0437+2940_S_map.mod
wobs   /image_prod/ug002_uva//J0437+2940_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0437+2940_S_uvs.fits
wwins  /image_prod/ug002_uva//J0437+2940_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0437+2940_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0671601 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000224764 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.00401 1.00401 2.00801 4.01602 8.03205 16.0641 32.1282 64.2564
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.067 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  298.802 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0437+2940_S_dfm.log closed on Wed Mar  4 20:24:45 2020