! Started logfile: /image_prod/ug002_uva//J0434-2514_S_dfm.log on Wed Mar 4 20:24:12 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0434-2514_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0434-2514_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0434-2514 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4200 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0434-2514_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.006238Jy sigma=6.789373 ! Fit after self-cal, rms=0.927140Jy sigma=6.258548 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=6.23 mas, bpa=-2.875 degrees ! Estimated noise=2.59839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592435 Jy ! Component: 100 - total flux cleaned = 0.0722212 Jy ! Total flux subtracted in 100 components = 0.0722212 Jy ! Clean residual min=-0.005119 max=0.004851 Jy/beam ! Clean residual mean=0.000004 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.0722212 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0722212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081881Jy sigma=0.462608 ! Fit after self-cal, rms=0.081127Jy sigma=0.458161 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=7.452 mas, bpa=-3.165 degrees ! Estimated noise=1.67715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331459 Jy ! Component: 100 - total flux cleaned = 0.00423084 Jy ! Component: 150 - total flux cleaned = 0.00437607 Jy ! Component: 200 - total flux cleaned = 0.00446248 Jy ! Total flux subtracted in 200 components = 0.00446248 Jy ! Clean residual min=-0.003206 max=0.003132 Jy/beam ! Clean residual mean=0.000005 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0766837 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.0766837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080942Jy sigma=0.457263 ! Fit after self-cal, rms=0.080946Jy sigma=0.457240 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 7.452 at -3.165 degrees (North through East) ! Clean map min=-0.0030069 max=0.075541 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 KP 0.98 LA 1.03 ! MK 0.98 NL 1.02 OV 0.96 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 KP 1.02 LA 1.00 ! MK 1.01 NL 0.93 OV 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 KP 1.01 LA 0.99 ! MK 1.02 NL 1.02 OV 0.97 SC 0.94 ! ! ! Fit before self-cal, rms=0.080946Jy sigma=0.457240 ! Fit after self-cal, rms=0.080148Jy sigma=0.456638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=7.457 mas, bpa=-3.148 degrees ! Estimated noise=1.67888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229699 Jy ! Component: 100 - total flux cleaned = 0.000325149 Jy ! Component: 150 - total flux cleaned = 0.0003854 Jy ! Component: 200 - total flux cleaned = 0.000439973 Jy ! Total flux subtracted in 200 components = 0.000439973 Jy ! Clean residual min=-0.003245 max=0.003212 Jy/beam ! Clean residual mean=0.000006 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0771237 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.0771237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080129Jy sigma=0.456557 ! Fit after self-cal, rms=0.080143Jy sigma=0.456502 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080143Jy sigma=0.456502 ! Fit after self-cal, rms=0.078748Jy sigma=0.454841 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=7.453 mas, bpa=-3.251 degrees ! Estimated noise=1.69214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524847 Jy ! Component: 100 - total flux cleaned = 0.000590169 Jy ! Component: 150 - total flux cleaned = 0.000662234 Jy ! Component: 200 - total flux cleaned = 0.000708268 Jy ! Total flux subtracted in 200 components = 0.000708268 Jy ! Clean residual min=-0.003212 max=0.002865 Jy/beam ! Clean residual mean=0.000007 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0778319 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.0778319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078736Jy sigma=0.454770 ! Fit after self-cal, rms=0.078754Jy sigma=0.454718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06432e-05 Jy ! Component: 100 - total flux cleaned = 6.08691e-05 Jy ! Component: 150 - total flux cleaned = 8.60526e-05 Jy ! Component: 200 - total flux cleaned = 9.76371e-05 Jy ! Total flux subtracted in 200 components = 9.76371e-05 Jy ! Clean residual min=-0.003232 max=0.002876 Jy/beam ! Clean residual mean=0.000007 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0779296 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.0779296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078749Jy sigma=0.454682 ! Fit after self-cal, rms=0.078746Jy sigma=0.454675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078746Jy sigma=0.454675 ! Fit after self-cal, rms=0.077279Jy sigma=0.454249 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=7.445 mas, bpa=-3.249 degrees ! Estimated noise=1.69061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40054e-05 Jy ! Component: 100 - total flux cleaned = -1.62192e-05 Jy ! Component: 150 - total flux cleaned = -6.24926e-05 Jy ! Component: 200 - total flux cleaned = -5.2137e-05 Jy ! Total flux subtracted in 200 components = -5.2137e-05 Jy ! Clean residual min=-0.003178 max=0.002738 Jy/beam ! Clean residual mean=0.000005 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.0778774 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0778774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077275Jy sigma=0.454211 ! Fit after self-cal, rms=0.077263Jy sigma=0.454191 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.75934e-05 Jy ! Component: 100 - total flux cleaned = 3.72601e-05 Jy ! Component: 150 - total flux cleaned = 2.81311e-05 Jy ! Component: 200 - total flux cleaned = 3.65363e-05 Jy ! Total flux subtracted in 200 components = 3.65363e-05 Jy ! Clean residual min=-0.003197 max=0.002766 Jy/beam ! Clean residual mean=0.000005 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.077914 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.077914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077261Jy sigma=0.454171 ! Fit after self-cal, rms=0.077260Jy sigma=0.454169 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077260Jy sigma=0.454169 ! Fit after self-cal, rms=0.077166Jy sigma=0.454162 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.033 mas, bmaj=17.94 mas, bpa=-0.4996 degrees ! Estimated noise=2.16209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.4427e-05 Jy ! Component: 100 - total flux cleaned = -1.74704e-05 Jy ! Component: 150 - total flux cleaned = 1.62516e-05 Jy ! Component: 200 - total flux cleaned = 4.66377e-05 Jy ! Total flux subtracted in 200 components = 4.66377e-05 Jy ! Clean residual min=-0.003141 max=0.002845 Jy/beam ! Clean residual mean=0.000010 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.0779606 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 0.0779606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077167Jy sigma=0.454181 ! Fit after self-cal, rms=0.077166Jy sigma=0.454170 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0576e-05 Jy ! Component: 100 - total flux cleaned = -5.19197e-06 Jy ! Component: 150 - total flux cleaned = 3.40417e-05 Jy ! Component: 200 - total flux cleaned = 5.74045e-05 Jy ! Total flux subtracted in 200 components = 5.74045e-05 Jy ! Clean residual min=-0.003137 max=0.002836 Jy/beam ! Clean residual mean=0.000010 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.078018 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 45 components and 0.078018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077172Jy sigma=0.454220 ! Fit after self-cal, rms=0.077171Jy sigma=0.454212 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.443 mas, bpa=-3.202 degrees ! Estimated noise=1.68967 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.443 at -3.202 degrees (North through East) ! Clean map min=-0.0029706 max=0.074775 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=6.214 mas, bpa=-2.744 degrees ! Estimated noise=2.59808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595953 Jy ! Component: 100 - total flux cleaned = 0.073108 Jy ! Component: 150 - total flux cleaned = 0.0758994 Jy ! Component: 200 - total flux cleaned = 0.0764189 Jy ! Total flux subtracted in 200 components = 0.0764189 Jy ! Clean residual min=-0.004500 max=0.004169 Jy/beam ! Clean residual mean=0.000004 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.0764189 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0764189 Jy ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.443 mas, bpa=-3.202 degrees ! Estimated noise=1.68967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852243 Jy ! Component: 100 - total flux cleaned = 0.00102935 Jy ! Component: 150 - total flux cleaned = 0.00113245 Jy ! Component: 200 - total flux cleaned = 0.00118948 Jy ! Total flux subtracted in 200 components = 0.00118948 Jy ! Clean residual min=-0.003193 max=0.002778 Jy/beam ! Clean residual mean=0.000005 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0776084 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.0776084 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.033 mas, bmaj=17.94 mas, bpa=-0.4996 degrees ! Estimated noise=2.16209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018618 Jy ! Component: 100 - total flux cleaned = 0.000189931 Jy ! Component: 150 - total flux cleaned = 0.000209194 Jy ! Component: 200 - total flux cleaned = 0.000241615 Jy ! Total flux subtracted in 200 components = 0.000241615 Jy ! Clean residual min=-0.003154 max=0.002881 Jy/beam ! Clean residual mean=0.000010 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.07785 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.8671e-05 Jy ! Component: 100 - total flux cleaned = 5.42282e-05 Jy ! Component: 150 - total flux cleaned = 7.81012e-05 Jy ! Component: 200 - total flux cleaned = 9.88272e-05 Jy ! Total flux subtracted in 200 components = 9.88272e-05 Jy ! Clean residual min=-0.003141 max=0.002855 Jy/beam ! Clean residual mean=0.000010 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.0779488 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0779488 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.443 mas, bpa=-3.202 degrees ! Estimated noise=1.68967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.25563e-05 Jy ! Component: 100 - total flux cleaned = -7.15102e-05 Jy ! Component: 150 - total flux cleaned = -3.25756e-05 Jy ! Component: 200 - total flux cleaned = -3.29755e-05 Jy ! Total flux subtracted in 200 components = -3.29755e-05 Jy ! Clean residual min=-0.003163 max=0.002729 Jy/beam ! Clean residual mean=0.000005 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0779159 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.0779158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077182Jy sigma=0.454270 ! Fit after self-cal, rms=0.077177Jy sigma=0.454245 wmodel J0434-2514_S_map.mod ! Writing 36 model components to file: J0434-2514_S_map.mod wobs J0434-2514_S_uvs.fits ! Writing UV FITS file: J0434-2514_S_uvs.fits wwins J0434-2514_S_map.win ! wwins: Wrote 1 windows to J0434-2514_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113438 Jy ! Component: 100 - total flux cleaned = -0.00153159 Jy ! Component: 150 - total flux cleaned = -0.00190275 Jy ! Component: 200 - total flux cleaned = -0.00194701 Jy ! Component: 250 - total flux cleaned = -0.00173658 Jy ! Component: 300 - total flux cleaned = -0.00165437 Jy ! Component: 350 - total flux cleaned = -0.00153633 Jy ! Component: 400 - total flux cleaned = -0.00138515 Jy ! Component: 450 - total flux cleaned = -0.00131234 Jy ! Component: 500 - total flux cleaned = -0.00110084 Jy ! Component: 550 - total flux cleaned = -0.000963323 Jy ! Component: 600 - total flux cleaned = -0.000762281 Jy ! Component: 650 - total flux cleaned = -0.000566514 Jy ! Component: 700 - total flux cleaned = -0.000249542 Jy ! Component: 750 - total flux cleaned = -0.000157113 Jy ! Component: 800 - total flux cleaned = -5.73268e-06 Jy ! Component: 850 - total flux cleaned = 0.000171578 Jy ! Component: 900 - total flux cleaned = 0.00037302 Jy ! Component: 950 - total flux cleaned = 0.000513481 Jy ! Component: 1000 - total flux cleaned = 0.000651242 Jy ! Component: 1050 - total flux cleaned = 0.000758011 Jy ! Component: 1100 - total flux cleaned = 0.000757844 Jy ! Component: 1150 - total flux cleaned = 0.000861587 Jy ! Component: 1200 - total flux cleaned = 0.000913186 Jy ! Component: 1250 - total flux cleaned = 0.00101306 Jy ! Component: 1300 - total flux cleaned = 0.00103755 Jy ! Component: 1350 - total flux cleaned = 0.00108594 Jy ! Component: 1400 - total flux cleaned = 0.00118006 Jy ! Component: 1450 - total flux cleaned = 0.00118025 Jy ! Component: 1500 - total flux cleaned = 0.0012262 Jy ! Component: 1550 - total flux cleaned = 0.00127097 Jy ! Component: 1600 - total flux cleaned = 0.00135865 Jy ! Component: 1650 - total flux cleaned = 0.00138015 Jy ! Component: 1700 - total flux cleaned = 0.00144403 Jy ! Component: 1750 - total flux cleaned = 0.00152759 Jy ! Component: 1800 - total flux cleaned = 0.0015891 Jy ! Component: 1850 - total flux cleaned = 0.0016498 Jy ! Component: 1900 - total flux cleaned = 0.00172948 Jy ! Component: 1950 - total flux cleaned = 0.00172949 Jy ! Component: 2000 - total flux cleaned = 0.00174913 Jy ! Component: 2050 - total flux cleaned = 0.00184516 Jy ! Component: 2100 - total flux cleaned = 0.00180729 Jy ! Component: 2150 - total flux cleaned = 0.00190049 Jy ! Component: 2200 - total flux cleaned = 0.00197399 Jy ! Component: 2250 - total flux cleaned = 0.00197372 Jy ! Component: 2300 - total flux cleaned = 0.00200975 Jy ! Component: 2350 - total flux cleaned = 0.00206287 Jy ! Component: 2400 - total flux cleaned = 0.00218482 Jy ! Component: 2450 - total flux cleaned = 0.0021848 Jy ! Component: 2500 - total flux cleaned = 0.00228672 Jy ! Component: 2550 - total flux cleaned = 0.00235378 Jy ! Component: 2600 - total flux cleaned = 0.00242057 Jy ! Component: 2650 - total flux cleaned = 0.00245332 Jy ! Component: 2700 - total flux cleaned = 0.00248591 Jy ! Component: 2750 - total flux cleaned = 0.00258238 Jy ! Component: 2800 - total flux cleaned = 0.00259821 Jy ! Component: 2850 - total flux cleaned = 0.00259818 Jy ! Component: 2900 - total flux cleaned = 0.00266064 Jy ! Component: 2950 - total flux cleaned = 0.00266059 Jy ! Component: 3000 - total flux cleaned = 0.00264553 Jy ! Component: 3050 - total flux cleaned = 0.00263048 Jy ! Component: 3100 - total flux cleaned = 0.0027056 Jy ! Component: 3150 - total flux cleaned = 0.00273551 Jy ! Component: 3200 - total flux cleaned = 0.00279434 Jy ! Component: 3250 - total flux cleaned = 0.00286708 Jy ! Component: 3300 - total flux cleaned = 0.00296796 Jy ! Component: 3350 - total flux cleaned = 0.00293941 Jy ! Component: 3400 - total flux cleaned = 0.0029819 Jy ! Component: 3450 - total flux cleaned = 0.00303785 Jy ! Component: 3500 - total flux cleaned = 0.0030655 Jy ! Component: 3550 - total flux cleaned = 0.00303792 Jy ! Component: 3600 - total flux cleaned = 0.00305174 Jy ! Component: 3650 - total flux cleaned = 0.00301108 Jy ! Component: 3700 - total flux cleaned = 0.00299762 Jy ! Component: 3750 - total flux cleaned = 0.00298438 Jy ! Component: 3800 - total flux cleaned = 0.00294466 Jy ! Component: 3850 - total flux cleaned = 0.00291851 Jy ! Component: 3900 - total flux cleaned = 0.00291841 Jy ! Component: 3950 - total flux cleaned = 0.00289251 Jy ! Component: 4000 - total flux cleaned = 0.0028797 Jy ! Component: 4050 - total flux cleaned = 0.00286693 Jy ! Total flux subtracted in 4096 components = 0.00284148 Jy ! Clean residual min=-0.000792 max=0.000709 Jy/beam ! Clean residual mean=0.000002 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0807573 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 313 components and 0.0807573 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0434-2514_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.443 at -3.202 degrees (North through East) ! Clean map min=-0.0017011 max=0.07489 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0434-2514_S_map.fits wmodel /image_prod/ug002_uva//J0434-2514_S_map.mod ! Writing 313 model components to file: /image_prod/ug002_uva//J0434-2514_S_map.mod wobs /image_prod/ug002_uva//J0434-2514_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0434-2514_S_uvs.fits wwins /image_prod/ug002_uva//J0434-2514_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0434-2514_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0748896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218471 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.875174 0.875174 1.75035 3.5007 7.00139 14.0028 28.0056 56.0111 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.074 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 342.789 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0434-2514_S_dfm.log closed on Wed Mar 4 20:24:15 2020