! Started logfile: /image_prod/ug002_uva//J0433+2905_S_a_dfm.log on Wed Mar 4 20:23:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0433+2905_S_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0433+2905_S_a_uva.fits ! AN table 1: 6 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.940476 visibilities/baseline/integration-bin. ! Found source: J0433+2905 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 474 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0433+2905_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.026290Jy sigma=12.081123 ! Fit after self-cal, rms=0.776930Jy sigma=9.291126 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=9.473 mas, bpa=-20.7 degrees ! Estimated noise=3.47421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177898 Jy ! Component: 100 - total flux cleaned = 0.205108 Jy ! Total flux subtracted in 100 components = 0.205108 Jy ! Clean residual min=-0.030579 max=0.027644 Jy/beam ! Clean residual mean=0.000034 rms=0.006629 Jy/beam ! Combined flux in latest and established models = 0.205108 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.205108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.110366Jy sigma=0.981707 ! Fit after self-cal, rms=0.110335Jy sigma=0.981539 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=9.63 mas, bpa=-20.6 degrees ! Estimated noise=3.03833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154246 Jy ! Component: 100 - total flux cleaned = 0.000913564 Jy ! Component: 150 - total flux cleaned = -0.000114433 Jy ! Component: 200 - total flux cleaned = -0.000947473 Jy ! Total flux subtracted in 200 components = -0.000947473 Jy ! Clean residual min=-0.018285 max=0.024662 Jy/beam ! Clean residual mean=0.000038 rms=0.005075 Jy/beam ! Combined flux in latest and established models = 0.20416 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.20416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103136Jy sigma=0.907986 ! Fit after self-cal, rms=0.102997Jy sigma=0.907447 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.474 x 9.63 at -20.6 degrees (North through East) ! Clean map min=-0.017731 max=0.21774 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.18 KP 0.92 LA 1.00 ! MK 0.92 NL 0.97 OV 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 1.29 KP 0.96 LA 0.98 ! MK 0.89 NL 1.04 OV 0.96 SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 1.43 KP 0.96 LA 0.97 ! MK 0.86 NL 1.11 OV 1.03 SC 0.90 ! ! ! Fit before self-cal, rms=0.102997Jy sigma=0.907447 ! Fit after self-cal, rms=0.085577Jy sigma=0.780153 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=9.245 mas, bpa=-21.13 degrees ! Estimated noise=2.98064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667342 Jy ! Component: 100 - total flux cleaned = 0.00989593 Jy ! Component: 150 - total flux cleaned = 0.0102747 Jy ! Component: 200 - total flux cleaned = 0.0105163 Jy ! Total flux subtracted in 200 components = 0.0105163 Jy ! Clean residual min=-0.006844 max=0.007762 Jy/beam ! Clean residual mean=0.000008 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.214677 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.214677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084688Jy sigma=0.775346 ! Fit after self-cal, rms=0.084622Jy sigma=0.774435 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084622Jy sigma=0.774435 ! Fit after self-cal, rms=0.083666Jy sigma=0.772256 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=9.165 mas, bpa=-21.25 degrees ! Estimated noise=2.97517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036721 Jy ! Component: 100 - total flux cleaned = 0.00472635 Jy ! Component: 150 - total flux cleaned = 0.00529333 Jy ! Component: 200 - total flux cleaned = 0.0056522 Jy ! Total flux subtracted in 200 components = 0.0056522 Jy ! Clean residual min=-0.006268 max=0.007236 Jy/beam ! Clean residual mean=0.000004 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.220329 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.220329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083301Jy sigma=0.771058 ! Fit after self-cal, rms=0.083281Jy sigma=0.770961 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420971 Jy ! Component: 100 - total flux cleaned = 0.000678786 Jy ! Component: 150 - total flux cleaned = 0.000825432 Jy ! Component: 200 - total flux cleaned = 0.000954412 Jy ! Total flux subtracted in 200 components = 0.000954412 Jy ! Clean residual min=-0.006282 max=0.007172 Jy/beam ! Clean residual mean=0.000005 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.221283 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.221283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083188Jy sigma=0.770894 ! Fit after self-cal, rms=0.083199Jy sigma=0.770818 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083199Jy sigma=0.770818 ! Fit after self-cal, rms=0.082513Jy sigma=0.769885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=9.107 mas, bpa=-21.27 degrees ! Estimated noise=2.9705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205495 Jy ! Component: 100 - total flux cleaned = 0.00251341 Jy ! Component: 150 - total flux cleaned = 0.00294003 Jy ! Component: 200 - total flux cleaned = 0.00321916 Jy ! Total flux subtracted in 200 components = 0.00321916 Jy ! Clean residual min=-0.006403 max=0.006850 Jy/beam ! Clean residual mean=0.000002 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.224502 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.224502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082353Jy sigma=0.769603 ! Fit after self-cal, rms=0.082343Jy sigma=0.769566 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175012 Jy ! Component: 100 - total flux cleaned = 0.000371694 Jy ! Component: 150 - total flux cleaned = 0.000461251 Jy ! Component: 200 - total flux cleaned = 0.000517883 Jy ! Total flux subtracted in 200 components = 0.000517883 Jy ! Clean residual min=-0.006371 max=0.006836 Jy/beam ! Clean residual mean=0.000002 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.22502 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.22502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082292Jy sigma=0.769488 ! Fit after self-cal, rms=0.082301Jy sigma=0.769457 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082301Jy sigma=0.769457 ! Fit after self-cal, rms=0.081832Jy sigma=0.769081 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=10.62 mas, bpa=-3.855 degrees ! Estimated noise=3.36723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148548 Jy ! Component: 100 - total flux cleaned = 0.00173898 Jy ! Component: 150 - total flux cleaned = 0.00185475 Jy ! Component: 200 - total flux cleaned = 0.00190093 Jy ! Total flux subtracted in 200 components = 0.00190093 Jy ! Clean residual min=-0.007196 max=0.006744 Jy/beam ! Clean residual mean=0.000002 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.226921 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.226921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081809Jy sigma=0.769015 ! Fit after self-cal, rms=0.081795Jy sigma=0.768938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.04835e-05 Jy ! Component: 100 - total flux cleaned = -4.47337e-05 Jy ! Component: 150 - total flux cleaned = -2.41612e-05 Jy ! Component: 200 - total flux cleaned = -2.43111e-05 Jy ! Total flux subtracted in 200 components = -2.43111e-05 Jy ! Clean residual min=-0.007168 max=0.006696 Jy/beam ! Clean residual mean=0.000002 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.226897 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.226897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081785Jy sigma=0.769007 ! Fit after self-cal, rms=0.081789Jy sigma=0.768966 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=9.072 mas, bpa=-21.26 degrees ! Estimated noise=2.96709 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 9.072 at -21.26 degrees (North through East) ! Clean map min=-0.0061221 max=0.21333 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=9.004 mas, bpa=-21.4 degrees ! Estimated noise=3.35089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171546 Jy ! Component: 100 - total flux cleaned = 0.210048 Jy ! Component: 150 - total flux cleaned = 0.21619 Jy ! Component: 200 - total flux cleaned = 0.219021 Jy ! Total flux subtracted in 200 components = 0.219021 Jy ! Clean residual min=-0.011535 max=0.010085 Jy/beam ! Clean residual mean=-0.000003 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.219021 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.219021 Jy ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=9.072 mas, bpa=-21.26 degrees ! Estimated noise=2.96709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243631 Jy ! Component: 100 - total flux cleaned = 0.00336284 Jy ! Component: 150 - total flux cleaned = 0.00426844 Jy ! Component: 200 - total flux cleaned = 0.00498811 Jy ! Total flux subtracted in 200 components = 0.00498811 Jy ! Clean residual min=-0.006443 max=0.008185 Jy/beam ! Clean residual mean=-0.000001 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.224009 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.224009 Jy ! Inverting map ! Added new window around map position (108.5, -81). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352018 Jy ! Component: 100 - total flux cleaned = 0.0033638 Jy ! Component: 150 - total flux cleaned = 0.00335931 Jy ! Component: 200 - total flux cleaned = 0.00325262 Jy ! Total flux subtracted in 200 components = 0.00325262 Jy ! Clean residual min=-0.005888 max=0.005602 Jy/beam ! Clean residual mean=0.000001 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.227262 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 0.227262 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=10.62 mas, bpa=-3.855 degrees ! Estimated noise=3.36723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148064 Jy ! Component: 100 - total flux cleaned = -5.11415e-05 Jy ! Component: 150 - total flux cleaned = 9.52085e-06 Jy ! Component: 200 - total flux cleaned = 0.00014915 Jy ! Total flux subtracted in 200 components = 0.00014915 Jy ! Clean residual min=-0.005499 max=0.005234 Jy/beam ! Clean residual mean=0.000001 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.227411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.41894e-06 Jy ! Component: 100 - total flux cleaned = -3.85762e-05 Jy ! Component: 150 - total flux cleaned = -5.79783e-06 Jy ! Component: 200 - total flux cleaned = -6.77692e-06 Jy ! Total flux subtracted in 200 components = -6.77692e-06 Jy ! Clean residual min=-0.005343 max=0.005019 Jy/beam ! Clean residual mean=0.000002 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.227404 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 81 components and 0.227404 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=9.072 mas, bpa=-21.26 degrees ! Estimated noise=2.96709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108189 Jy ! Component: 100 - total flux cleaned = -0.00145897 Jy ! Component: 150 - total flux cleaned = -0.00118309 Jy ! Component: 200 - total flux cleaned = -0.000925419 Jy ! Total flux subtracted in 200 components = -0.000925419 Jy ! Clean residual min=-0.005295 max=0.004830 Jy/beam ! Clean residual mean=0.000001 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.226479 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.226479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081022Jy sigma=0.761211 ! Fit after self-cal, rms=0.080995Jy sigma=0.760647 wmodel J0433+2905_S_a_map.mod ! Writing 95 model components to file: J0433+2905_S_a_map.mod wobs J0433+2905_S_a_uvs.fits ! Writing UV FITS file: J0433+2905_S_a_uvs.fits wwins J0433+2905_S_a_map.win ! wwins: Wrote 2 windows to J0433+2905_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161283 Jy ! Component: 100 - total flux cleaned = -0.00290384 Jy ! Component: 150 - total flux cleaned = -0.00364157 Jy ! Component: 200 - total flux cleaned = -0.0038516 Jy ! Component: 250 - total flux cleaned = -0.00365891 Jy ! Component: 300 - total flux cleaned = -0.00353576 Jy ! Component: 350 - total flux cleaned = -0.00341676 Jy ! Component: 400 - total flux cleaned = -0.003194 Jy ! Component: 450 - total flux cleaned = -0.00303639 Jy ! Component: 500 - total flux cleaned = -0.00273309 Jy ! Component: 550 - total flux cleaned = -0.00258642 Jy ! Component: 600 - total flux cleaned = -0.00253908 Jy ! Component: 650 - total flux cleaned = -0.00240334 Jy ! Component: 700 - total flux cleaned = -0.00231566 Jy ! Component: 750 - total flux cleaned = -0.00227282 Jy ! Component: 800 - total flux cleaned = -0.00223115 Jy ! Component: 850 - total flux cleaned = -0.00219007 Jy ! Component: 900 - total flux cleaned = -0.00214895 Jy ! Component: 950 - total flux cleaned = -0.00210885 Jy ! Component: 1000 - total flux cleaned = -0.00203101 Jy ! Component: 1050 - total flux cleaned = -0.0020313 Jy ! Component: 1100 - total flux cleaned = -0.00191862 Jy ! Component: 1150 - total flux cleaned = -0.00180736 Jy ! Component: 1200 - total flux cleaned = -0.00180761 Jy ! Component: 1250 - total flux cleaned = -0.00166357 Jy ! Component: 1300 - total flux cleaned = -0.00155689 Jy ! Component: 1350 - total flux cleaned = -0.00145197 Jy ! Component: 1400 - total flux cleaned = -0.00131408 Jy ! Component: 1450 - total flux cleaned = -0.00124674 Jy ! Component: 1500 - total flux cleaned = -0.00124712 Jy ! Component: 1550 - total flux cleaned = -0.00134753 Jy ! Component: 1600 - total flux cleaned = -0.00144645 Jy ! Component: 1650 - total flux cleaned = -0.00154471 Jy ! Component: 1700 - total flux cleaned = -0.00160959 Jy ! Component: 1750 - total flux cleaned = -0.00173924 Jy ! Component: 1800 - total flux cleaned = -0.00186795 Jy ! Component: 1850 - total flux cleaned = -0.00189999 Jy ! Component: 1900 - total flux cleaned = -0.00199584 Jy ! Component: 1950 - total flux cleaned = -0.00205935 Jy ! Component: 2000 - total flux cleaned = -0.00215401 Jy ! Component: 2050 - total flux cleaned = -0.00221711 Jy ! Component: 2100 - total flux cleaned = -0.00234284 Jy ! Component: 2150 - total flux cleaned = -0.00253124 Jy ! Component: 2200 - total flux cleaned = -0.00265648 Jy ! Component: 2250 - total flux cleaned = -0.00284429 Jy ! Component: 2300 - total flux cleaned = -0.0029691 Jy ! Component: 2350 - total flux cleaned = -0.00312536 Jy ! Component: 2400 - total flux cleaned = -0.0033128 Jy ! Component: 2450 - total flux cleaned = -0.00346887 Jy ! Component: 2500 - total flux cleaned = -0.00362535 Jy ! Component: 2550 - total flux cleaned = -0.00381316 Jy ! Component: 2600 - total flux cleaned = -0.0039072 Jy ! Component: 2650 - total flux cleaned = -0.00409586 Jy ! Component: 2700 - total flux cleaned = -0.00425365 Jy ! Component: 2750 - total flux cleaned = -0.0043803 Jy ! Component: 2800 - total flux cleaned = -0.0045072 Jy ! Component: 2850 - total flux cleaned = -0.00457114 Jy ! Component: 2900 - total flux cleaned = -0.00473148 Jy ! Component: 2950 - total flux cleaned = -0.00486036 Jy ! Component: 3000 - total flux cleaned = -0.00492517 Jy ! Component: 3050 - total flux cleaned = -0.0050554 Jy ! Component: 3100 - total flux cleaned = -0.00515376 Jy ! Component: 3150 - total flux cleaned = -0.0053188 Jy ! Component: 3200 - total flux cleaned = -0.00535201 Jy ! Component: 3250 - total flux cleaned = -0.00541903 Jy ! Component: 3300 - total flux cleaned = -0.00545296 Jy ! Component: 3350 - total flux cleaned = -0.00552087 Jy ! Component: 3400 - total flux cleaned = -0.00558996 Jy ! Component: 3450 - total flux cleaned = -0.00562504 Jy ! Component: 3500 - total flux cleaned = -0.00566055 Jy ! Component: 3550 - total flux cleaned = -0.00569623 Jy ! Component: 3600 - total flux cleaned = -0.00573194 Jy ! Component: 3650 - total flux cleaned = -0.00580509 Jy ! Component: 3700 - total flux cleaned = -0.00580492 Jy ! Component: 3750 - total flux cleaned = -0.00587968 Jy ! Component: 3800 - total flux cleaned = -0.00591755 Jy ! Component: 3850 - total flux cleaned = -0.00595568 Jy ! Component: 3900 - total flux cleaned = -0.00599482 Jy ! Component: 3950 - total flux cleaned = -0.00603392 Jy ! Component: 4000 - total flux cleaned = -0.006074 Jy ! Component: 4050 - total flux cleaned = -0.00611398 Jy ! Total flux subtracted in 4096 components = -0.00615466 Jy ! Clean residual min=-0.002749 max=0.002564 Jy/beam ! Clean residual mean=0.000004 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.220324 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 325 components and 0.220324 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0433+2905_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 9.072 at -21.26 degrees (North through East) ! Clean map min=-0.0043111 max=0.21183 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0433+2905_S_a_map.fits wmodel /image_prod/ug002_uva//J0433+2905_S_a_map.mod ! Writing 325 model components to file: /image_prod/ug002_uva//J0433+2905_S_a_map.mod wobs /image_prod/ug002_uva//J0433+2905_S_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0433+2905_S_a_uvs.fits wwins /image_prod/ug002_uva//J0433+2905_S_a_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0433+2905_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.211827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000612783 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.867852 0.867852 1.7357 3.47141 6.94282 13.8856 27.7713 55.5425 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.211 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 345.681 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0433+2905_S_a_dfm.log closed on Wed Mar 4 20:23:49 2020