! Started logfile: /image_prod/ug002_uva//J0432+4138_X_dfm.log on Wed Mar 4 20:23:19 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0432+4138_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0432+4138_X_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.971481 visibilities/baseline/integration-bin. ! Found source: J0432+4138 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31476 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0432+4138_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.156410Jy sigma=8.755041 ! Fit after self-cal, rms=0.685429Jy sigma=5.813312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6774 mas, bmaj=1.164 mas, bpa=-2.583 degrees ! Estimated noise=1.16089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230496 Jy ! Component: 100 - total flux cleaned = 0.350845 Jy ! Total flux subtracted in 100 components = 0.350845 Jy ! Clean residual min=-0.039098 max=0.082509 Jy/beam ! Clean residual mean=0.000090 rms=0.009706 Jy/beam ! Combined flux in latest and established models = 0.350845 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.350845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.384483Jy sigma=2.422205 ! Fit after self-cal, rms=0.383237Jy sigma=2.413833 ! Inverting map ! Added new window around map position (17.2, 10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0979911 Jy ! Component: 100 - total flux cleaned = 0.173026 Jy ! Total flux subtracted in 100 components = 0.173026 Jy ! Clean residual min=-0.030569 max=0.054517 Jy/beam ! Clean residual mean=0.000071 rms=0.007763 Jy/beam ! Combined flux in latest and established models = 0.523871 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.523871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.315630Jy sigma=1.976824 ! Fit after self-cal, rms=0.313786Jy sigma=1.962014 ! Inverting map ! Added new window around map position (0, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703074 Jy ! Component: 100 - total flux cleaned = 0.127043 Jy ! Total flux subtracted in 100 components = 0.127043 Jy ! Clean residual min=-0.027533 max=0.057115 Jy/beam ! Clean residual mean=0.000058 rms=0.006493 Jy/beam ! Combined flux in latest and established models = 0.650914 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.650914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267478Jy sigma=1.667910 ! Fit after self-cal, rms=0.266833Jy sigma=1.664030 ! Inverting map ! Added new window around map position (30.4, 26.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583179 Jy ! Component: 100 - total flux cleaned = 0.10524 Jy ! Total flux subtracted in 100 components = 0.10524 Jy ! Clean residual min=-0.023887 max=0.032381 Jy/beam ! Clean residual mean=0.000055 rms=0.005472 Jy/beam ! Combined flux in latest and established models = 0.756154 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 71 components and 0.756154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.233538Jy sigma=1.440781 ! Fit after self-cal, rms=0.233017Jy sigma=1.437397 ! Inverting map ! Added new window around map position (1, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434463 Jy ! Component: 100 - total flux cleaned = 0.0815164 Jy ! Total flux subtracted in 100 components = 0.0815164 Jy ! Clean residual min=-0.020849 max=0.029685 Jy/beam ! Clean residual mean=0.000049 rms=0.004765 Jy/beam ! Combined flux in latest and established models = 0.83767 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.83767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.206454Jy sigma=1.269787 ! Fit after self-cal, rms=0.206212Jy sigma=1.267805 ! Inverting map ! Added new window around map position (0.6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362526 Jy ! Component: 100 - total flux cleaned = 0.0683072 Jy ! Total flux subtracted in 100 components = 0.0683072 Jy ! Clean residual min=-0.018481 max=0.024197 Jy/beam ! Clean residual mean=0.000044 rms=0.004189 Jy/beam ! Combined flux in latest and established models = 0.905977 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 91 components and 0.905977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184514Jy sigma=1.131881 ! Fit after self-cal, rms=0.184372Jy sigma=1.130733 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.852 mas, bmaj=1.396 mas, bpa=-1.279 degrees ! Estimated noise=0.519512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0663003 Jy ! Component: 100 - total flux cleaned = 0.116781 Jy ! Component: 150 - total flux cleaned = 0.159017 Jy ! Component: 200 - total flux cleaned = 0.195377 Jy ! Total flux subtracted in 200 components = 0.195377 Jy ! Clean residual min=-0.017608 max=0.023033 Jy/beam ! Clean residual mean=0.000058 rms=0.005285 Jy/beam ! Combined flux in latest and established models = 1.10135 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 141 components and 1.10135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127347Jy sigma=0.799026 ! Fit after self-cal, rms=0.126772Jy sigma=0.794221 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.852 x 1.396 at -1.279 degrees (North through East) ! Clean map min=-0.016978 max=0.34621 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.97 KP 0.94 ! LA 0.97 MK 1.11 OV 0.90 PT 0.83 ! SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.96 KP 0.94 ! LA 0.98 MK 1.10 OV 0.90 PT 0.83 ! SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.97 KP 0.94 ! LA 0.99 MK 1.10 OV 0.90 PT 0.83 ! SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.97 KP 0.95 ! LA 1.01 MK 1.10 OV 0.91 PT 0.84 ! SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.98 KP 0.95 ! LA 0.99 MK 1.08 OV 0.94 PT 0.84 ! SC 1.12 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.97 KP 0.94 ! LA 1.00 MK 1.06 OV 0.92 PT 0.82 ! SC 1.12 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.98 KP 0.95 ! LA 1.01 MK 1.11 OV 0.92 PT 0.85 ! SC 1.13 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.97 KP 0.97 ! LA 1.00 MK 1.09 OV 0.92 PT 0.82 ! SC 1.14 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.96 KP 0.95 ! LA 0.99 MK 1.09 OV 0.93 PT 0.84 ! SC 1.14 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.98 KP 0.94 ! LA 1.00 MK 1.10 OV 0.94 PT 0.84 ! SC 1.12 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.96 KP 0.94 ! LA 1.00 MK 1.16 OV 0.92 PT 0.84 ! SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.98 KP 0.96 ! LA 1.00 MK 1.21 OV 0.93 PT 0.82 ! SC 1.09 ! ! ! Fit before self-cal, rms=0.126772Jy sigma=0.794221 ! Fit after self-cal, rms=0.082669Jy sigma=0.631369 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.886 mas, bmaj=1.439 mas, bpa=-1.77 degrees ! Estimated noise=0.506017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.4, 10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228719 Jy ! Component: 100 - total flux cleaned = 0.0388022 Jy ! Component: 150 - total flux cleaned = 0.0509247 Jy ! Component: 200 - total flux cleaned = 0.0589247 Jy ! Total flux subtracted in 200 components = 0.0589247 Jy ! Clean residual min=-0.009627 max=0.015618 Jy/beam ! Clean residual mean=0.000043 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 1.16028 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 168 components and 1.16028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073947Jy sigma=0.554986 ! Fit after self-cal, rms=0.073404Jy sigma=0.552675 ! Inverting map ! Added new window around map position (19.8, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134452 Jy ! Component: 100 - total flux cleaned = 0.0212712 Jy ! Component: 150 - total flux cleaned = 0.0270781 Jy ! Component: 200 - total flux cleaned = 0.0311336 Jy ! Total flux subtracted in 200 components = 0.0311336 Jy ! Clean residual min=-0.009081 max=0.012401 Jy/beam ! Clean residual mean=0.000042 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 1.19141 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 184 components and 1.19141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069893Jy sigma=0.521869 ! Fit after self-cal, rms=0.069686Jy sigma=0.520782 ! Inverting map ! Added new window around map position (-1, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116526 Jy ! Component: 100 - total flux cleaned = 0.0184704 Jy ! Component: 150 - total flux cleaned = 0.0229712 Jy ! Component: 200 - total flux cleaned = 0.0261885 Jy ! Total flux subtracted in 200 components = 0.0261885 Jy ! Clean residual min=-0.008972 max=0.009780 Jy/beam ! Clean residual mean=0.000039 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 1.2176 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 216 components and 1.2176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066861Jy sigma=0.501707 ! Fit after self-cal, rms=0.066667Jy sigma=0.500828 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066667Jy sigma=0.500828 ! Fit after self-cal, rms=0.061830Jy sigma=0.472398 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.884 mas, bmaj=1.43 mas, bpa=-0.6978 degrees ! Estimated noise=0.50227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589263 Jy ! Component: 100 - total flux cleaned = 0.0107179 Jy ! Component: 150 - total flux cleaned = 0.0134782 Jy ! Component: 200 - total flux cleaned = 0.0152145 Jy ! Total flux subtracted in 200 components = 0.0152145 Jy ! Clean residual min=-0.006732 max=0.007442 Jy/beam ! Clean residual mean=0.000024 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 1.23282 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 229 components and 1.23282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060817Jy sigma=0.463684 ! Fit after self-cal, rms=0.060760Jy sigma=0.463437 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631403 Jy ! Component: 100 - total flux cleaned = 0.00955543 Jy ! Component: 150 - total flux cleaned = 0.0121418 Jy ! Component: 200 - total flux cleaned = 0.0140266 Jy ! Total flux subtracted in 200 components = 0.0140266 Jy ! Clean residual min=-0.006761 max=0.006562 Jy/beam ! Clean residual mean=0.000022 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 1.24684 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 246 components and 1.24684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059840Jy sigma=0.456115 ! Fit after self-cal, rms=0.059759Jy sigma=0.455868 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059759Jy sigma=0.455868 ! Fit after self-cal, rms=0.059516Jy sigma=0.455122 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8822 mas, bmaj=1.43 mas, bpa=-0.4056 degrees ! Estimated noise=0.502113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380465 Jy ! Component: 100 - total flux cleaned = 0.00646461 Jy ! Component: 150 - total flux cleaned = 0.00866845 Jy ! Component: 200 - total flux cleaned = 0.010514 Jy ! Total flux subtracted in 200 components = 0.010514 Jy ! Clean residual min=-0.006454 max=0.006255 Jy/beam ! Clean residual mean=0.000021 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 1.25736 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 258 components and 1.25736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059033Jy sigma=0.451428 ! Fit after self-cal, rms=0.059008Jy sigma=0.451325 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196901 Jy ! Component: 100 - total flux cleaned = 0.00297864 Jy ! Component: 150 - total flux cleaned = 0.00375085 Jy ! Component: 200 - total flux cleaned = 0.00439958 Jy ! Total flux subtracted in 200 components = 0.00439958 Jy ! Clean residual min=-0.006277 max=0.006087 Jy/beam ! Clean residual mean=0.000021 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 1.26176 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 265 components and 1.26176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058713Jy sigma=0.449003 ! Fit after self-cal, rms=0.058702Jy sigma=0.448956 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058702Jy sigma=0.448956 ! Fit after self-cal, rms=0.058568Jy sigma=0.448628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.147 mas, bmaj=2.384 mas, bpa=23.92 degrees ! Estimated noise=0.736183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717899 Jy ! Component: 100 - total flux cleaned = 0.0111783 Jy ! Component: 150 - total flux cleaned = 0.0135947 Jy ! Component: 200 - total flux cleaned = 0.0151268 Jy ! Total flux subtracted in 200 components = 0.0151268 Jy ! Clean residual min=-0.011738 max=0.010634 Jy/beam ! Clean residual mean=0.000054 rms=0.002969 Jy/beam ! Combined flux in latest and established models = 1.27688 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 281 components and 1.27688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058332Jy sigma=0.448033 ! Fit after self-cal, rms=0.058274Jy sigma=0.447424 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219306 Jy ! Component: 100 - total flux cleaned = 0.0034167 Jy ! Component: 150 - total flux cleaned = 0.00426301 Jy ! Component: 200 - total flux cleaned = 0.0047148 Jy ! Total flux subtracted in 200 components = 0.0047148 Jy ! Clean residual min=-0.011428 max=0.010187 Jy/beam ! Clean residual mean=0.000053 rms=0.002895 Jy/beam ! Combined flux in latest and established models = 1.2816 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 295 components and 1.2816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058239Jy sigma=0.447496 ! Fit after self-cal, rms=0.058220Jy sigma=0.447248 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=1.429 mas, bpa=-0.2882 degrees ! Estimated noise=0.501773 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.881 x 1.429 at -0.2882 degrees (North through East) ! Clean map min=-0.0054534 max=0.33026 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6964 mas, bmaj=1.187 mas, bpa=-1.425 degrees ! Estimated noise=1.1593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229404 Jy ! Component: 100 - total flux cleaned = 0.355042 Jy ! Component: 150 - total flux cleaned = 0.448525 Jy ! Component: 200 - total flux cleaned = 0.524947 Jy ! Total flux subtracted in 200 components = 0.524947 Jy ! Clean residual min=-0.027857 max=0.046610 Jy/beam ! Clean residual mean=0.000069 rms=0.007224 Jy/beam ! Combined flux in latest and established models = 0.524947 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.524947 Jy ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=1.429 mas, bpa=-0.2882 degrees ! Estimated noise=0.501773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119493 Jy ! Component: 100 - total flux cleaned = 0.206152 Jy ! Component: 150 - total flux cleaned = 0.277098 Jy ! Component: 200 - total flux cleaned = 0.336333 Jy ! Total flux subtracted in 200 components = 0.336333 Jy ! Clean residual min=-0.021924 max=0.035981 Jy/beam ! Clean residual mean=0.000060 rms=0.006614 Jy/beam ! Combined flux in latest and established models = 0.861279 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 84 components and 0.86128 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0498647 Jy ! Component: 100 - total flux cleaned = 0.092048 Jy ! Component: 150 - total flux cleaned = 0.127868 Jy ! Component: 200 - total flux cleaned = 0.158375 Jy ! Total flux subtracted in 200 components = 0.158375 Jy ! Clean residual min=-0.014107 max=0.018701 Jy/beam ! Clean residual mean=0.000046 rms=0.004015 Jy/beam ! Combined flux in latest and established models = 1.01965 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 110 components and 1.01965 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260615 Jy ! Component: 100 - total flux cleaned = 0.0485989 Jy ! Component: 150 - total flux cleaned = 0.0683994 Jy ! Component: 200 - total flux cleaned = 0.0859846 Jy ! Total flux subtracted in 200 components = 0.0859846 Jy ! Clean residual min=-0.010238 max=0.011179 Jy/beam ! Clean residual mean=0.000039 rms=0.002825 Jy/beam ! Combined flux in latest and established models = 1.10564 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 137 components and 1.10564 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.147 mas, bmaj=2.384 mas, bpa=23.92 degrees ! Estimated noise=0.736183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324821 Jy ! Component: 100 - total flux cleaned = 0.0553986 Jy ! Component: 150 - total flux cleaned = 0.0735222 Jy ! Component: 200 - total flux cleaned = 0.08878 Jy ! Total flux subtracted in 200 components = 0.08878 Jy ! Clean residual min=-0.015650 max=0.012335 Jy/beam ! Clean residual mean=0.000075 rms=0.004028 Jy/beam ! Combined flux in latest and established models = 1.19442 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130683 Jy ! Component: 100 - total flux cleaned = 0.0242895 Jy ! Component: 150 - total flux cleaned = 0.0339554 Jy ! Component: 200 - total flux cleaned = 0.0423176 Jy ! Total flux subtracted in 200 components = 0.0423176 Jy ! Clean residual min=-0.013351 max=0.010813 Jy/beam ! Clean residual mean=0.000065 rms=0.003300 Jy/beam ! Combined flux in latest and established models = 1.23674 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 207 components and 1.23674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=1.429 mas, bpa=-0.2882 degrees ! Estimated noise=0.501773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733361 Jy ! Component: 100 - total flux cleaned = 0.0119746 Jy ! Component: 150 - total flux cleaned = 0.0163447 Jy ! Component: 200 - total flux cleaned = 0.020311 Jy ! Total flux subtracted in 200 components = 0.020311 Jy ! Clean residual min=-0.006361 max=0.007067 Jy/beam ! Clean residual mean=0.000023 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 1.25705 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 237 components and 1.25705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060040Jy sigma=0.462030 ! Fit after self-cal, rms=0.059782Jy sigma=0.459286 wmodel J0432+4138_X_map.mod ! Writing 237 model components to file: J0432+4138_X_map.mod wobs J0432+4138_X_uvs.fits ! Writing UV FITS file: J0432+4138_X_uvs.fits wwins J0432+4138_X_map.win ! wwins: Wrote 11 windows to J0432+4138_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000833218 Jy ! Component: 100 - total flux cleaned = -0.00171051 Jy ! Component: 150 - total flux cleaned = -0.00201942 Jy ! Component: 200 - total flux cleaned = -0.00211915 Jy ! Component: 250 - total flux cleaned = -0.00221394 Jy ! Component: 300 - total flux cleaned = -0.00221552 Jy ! Component: 350 - total flux cleaned = -0.00230359 Jy ! Component: 400 - total flux cleaned = -0.0022159 Jy ! Component: 450 - total flux cleaned = -0.00221554 Jy ! Component: 500 - total flux cleaned = -0.00221661 Jy ! Component: 550 - total flux cleaned = -0.00229737 Jy ! Component: 600 - total flux cleaned = -0.00237617 Jy ! Component: 650 - total flux cleaned = -0.0025292 Jy ! Component: 700 - total flux cleaned = -0.00252784 Jy ! Component: 750 - total flux cleaned = -0.00275214 Jy ! Component: 800 - total flux cleaned = -0.00297088 Jy ! Component: 850 - total flux cleaned = -0.00339799 Jy ! Component: 900 - total flux cleaned = -0.00325609 Jy ! Component: 950 - total flux cleaned = -0.0036016 Jy ! Component: 1000 - total flux cleaned = -0.003805 Jy ! Component: 1050 - total flux cleaned = -0.00426878 Jy ! Component: 1100 - total flux cleaned = -0.00426755 Jy ! Component: 1150 - total flux cleaned = -0.00458874 Jy ! Component: 1200 - total flux cleaned = -0.00484237 Jy ! Component: 1250 - total flux cleaned = -0.00496622 Jy ! Component: 1300 - total flux cleaned = -0.00502863 Jy ! Component: 1350 - total flux cleaned = -0.00521063 Jy ! Component: 1400 - total flux cleaned = -0.00532941 Jy ! Component: 1450 - total flux cleaned = -0.00550582 Jy ! Component: 1500 - total flux cleaned = -0.00556439 Jy ! Component: 1550 - total flux cleaned = -0.00550756 Jy ! Component: 1600 - total flux cleaned = -0.00561989 Jy ! Component: 1650 - total flux cleaned = -0.005565 Jy ! Component: 1700 - total flux cleaned = -0.00551172 Jy ! Component: 1750 - total flux cleaned = -0.00567556 Jy ! Component: 1800 - total flux cleaned = -0.0057817 Jy ! Component: 1850 - total flux cleaned = -0.00594054 Jy ! Component: 1900 - total flux cleaned = -0.0058364 Jy ! Component: 1950 - total flux cleaned = -0.00588868 Jy ! Component: 2000 - total flux cleaned = -0.00609133 Jy ! Component: 2050 - total flux cleaned = -0.00609068 Jy ! Component: 2100 - total flux cleaned = -0.00613943 Jy ! Component: 2150 - total flux cleaned = -0.00613936 Jy ! Component: 2200 - total flux cleaned = -0.0060911 Jy ! Component: 2250 - total flux cleaned = -0.00613811 Jy ! Component: 2300 - total flux cleaned = -0.00618481 Jy ! Component: 2350 - total flux cleaned = -0.00600032 Jy ! Component: 2400 - total flux cleaned = -0.00618233 Jy ! Component: 2450 - total flux cleaned = -0.00600221 Jy ! Component: 2500 - total flux cleaned = -0.00600203 Jy ! Component: 2550 - total flux cleaned = -0.00587122 Jy ! Component: 2600 - total flux cleaned = -0.00600089 Jy ! Component: 2650 - total flux cleaned = -0.00595878 Jy ! Component: 2700 - total flux cleaned = -0.00608609 Jy ! Component: 2750 - total flux cleaned = -0.0058774 Jy ! Component: 2800 - total flux cleaned = -0.00604184 Jy ! Component: 2850 - total flux cleaned = -0.00608287 Jy ! Component: 2900 - total flux cleaned = -0.00620307 Jy ! Component: 2950 - total flux cleaned = -0.00600417 Jy ! Component: 3000 - total flux cleaned = -0.00608362 Jy ! Component: 3050 - total flux cleaned = -0.00600536 Jy ! Component: 3100 - total flux cleaned = -0.00596725 Jy ! Component: 3150 - total flux cleaned = -0.00596722 Jy ! Component: 3200 - total flux cleaned = -0.00589274 Jy ! Component: 3250 - total flux cleaned = -0.00592954 Jy ! Component: 3300 - total flux cleaned = -0.00589219 Jy ! Component: 3350 - total flux cleaned = -0.0058924 Jy ! Component: 3400 - total flux cleaned = -0.00582046 Jy ! Component: 3450 - total flux cleaned = -0.00571405 Jy ! Component: 3500 - total flux cleaned = -0.00567964 Jy ! Component: 3550 - total flux cleaned = -0.00547167 Jy ! Component: 3600 - total flux cleaned = -0.0055404 Jy ! Component: 3650 - total flux cleaned = -0.0054044 Jy ! Component: 3700 - total flux cleaned = -0.00533725 Jy ! Component: 3750 - total flux cleaned = -0.00527143 Jy ! Component: 3800 - total flux cleaned = -0.00523898 Jy ! Component: 3850 - total flux cleaned = -0.00520639 Jy ! Component: 3900 - total flux cleaned = -0.00507771 Jy ! Component: 3950 - total flux cleaned = -0.00510929 Jy ! Component: 4000 - total flux cleaned = -0.0051719 Jy ! Component: 4050 - total flux cleaned = -0.00510912 Jy ! Total flux subtracted in 4096 components = -0.00507802 Jy ! Clean residual min=-0.001542 max=0.001729 Jy/beam ! Clean residual mean=0.000009 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 1.25197 Jy keep ! Adding 348 model components to the UV plane model. ! The established model now contains 583 components and 1.25197 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0432+4138_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.881 x 1.429 at -0.2882 degrees (North through East) ! Clean map min=-0.0040298 max=0.33102 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0432+4138_X_map.fits wmodel /image_prod/ug002_uva//J0432+4138_X_map.mod ! Writing 583 model components to file: /image_prod/ug002_uva//J0432+4138_X_map.mod wobs /image_prod/ug002_uva//J0432+4138_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0432+4138_X_uvs.fits wwins /image_prod/ug002_uva//J0432+4138_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0432+4138_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.331022 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000550555 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.49896 0.49896 0.997919 1.99584 3.99168 7.98335 15.9667 31.9334 63.8668 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.331 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 601.251 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0432+4138_X_dfm.log closed on Wed Mar 4 20:23:26 2020