! Started logfile: /image_prod/ug002_uva//J0430-2507_S_dfm.log on Wed Mar 4 20:22:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0430-2507_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0430-2507_S_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0430-2507 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6750 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0430-2507_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.000577Jy sigma=6.549862 ! Fit after self-cal, rms=0.948294Jy sigma=6.201891 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=7.033 mas, bpa=-6.965 degrees ! Estimated noise=1.76602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433889 Jy ! Component: 100 - total flux cleaned = 0.0532545 Jy ! Total flux subtracted in 100 components = 0.0532545 Jy ! Clean residual min=-0.003778 max=0.003929 Jy/beam ! Clean residual mean=-0.000015 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0532546 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0532546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082608Jy sigma=0.462748 ! Fit after self-cal, rms=0.082076Jy sigma=0.459222 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=8.168 mas, bpa=-4.83 degrees ! Estimated noise=1.3623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344621 Jy ! Component: 100 - total flux cleaned = 0.00459102 Jy ! Component: 150 - total flux cleaned = 0.0048014 Jy ! Component: 200 - total flux cleaned = 0.00488817 Jy ! Total flux subtracted in 200 components = 0.00488817 Jy ! Clean residual min=-0.003117 max=0.002471 Jy/beam ! Clean residual mean=-0.000020 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.0581427 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.0581427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081986Jy sigma=0.457986 ! Fit after self-cal, rms=0.081989Jy sigma=0.457979 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.155 x 8.168 at -4.83 degrees (North through East) ! Clean map min=-0.0030465 max=0.056289 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.13 KP 0.95 ! LA 1.01 MK 0.96 NL 1.01 OV 1.02 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.03 HN 1.15 KP 0.89 ! LA 0.95 MK 0.96 NL 0.97 OV 0.97 ! PT 1.05 SC 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.10 HN 1.10 KP 1.05 ! LA 0.79 MK 0.99 NL 1.04 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Fit before self-cal, rms=0.081989Jy sigma=0.457979 ! Fit after self-cal, rms=0.084970Jy sigma=0.456190 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.064 mas, bpa=-4.476 degrees ! Estimated noise=1.35102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330092 Jy ! Component: 100 - total flux cleaned = 0.000349797 Jy ! Component: 150 - total flux cleaned = 0.000333359 Jy ! Component: 200 - total flux cleaned = 0.000318011 Jy ! Total flux subtracted in 200 components = 0.000318011 Jy ! Clean residual min=-0.002799 max=0.002480 Jy/beam ! Clean residual mean=-0.000010 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0584607 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0584607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084962Jy sigma=0.456117 ! Fit after self-cal, rms=0.085128Jy sigma=0.455863 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085128Jy sigma=0.455863 ! Fit after self-cal, rms=0.086725Jy sigma=0.455186 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=8.044 mas, bpa=-4.388 degrees ! Estimated noise=1.35384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342913 Jy ! Component: 100 - total flux cleaned = 0.000378595 Jy ! Component: 150 - total flux cleaned = 0.000377276 Jy ! Component: 200 - total flux cleaned = 0.00036337 Jy ! Total flux subtracted in 200 components = 0.00036337 Jy ! Clean residual min=-0.002739 max=0.002439 Jy/beam ! Clean residual mean=-0.000006 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0588241 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0588241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086719Jy sigma=0.455130 ! Fit after self-cal, rms=0.086784Jy sigma=0.455071 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123175 Jy ! Component: 100 - total flux cleaned = -0.000123306 Jy ! Component: 150 - total flux cleaned = -0.000122728 Jy ! Component: 200 - total flux cleaned = -0.000122612 Jy ! Total flux subtracted in 200 components = -0.000122612 Jy ! Clean residual min=-0.002744 max=0.002362 Jy/beam ! Clean residual mean=-0.000007 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0587015 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.0587015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086780Jy sigma=0.455045 ! Fit after self-cal, rms=0.086780Jy sigma=0.455041 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086780Jy sigma=0.455041 ! Fit after self-cal, rms=0.087046Jy sigma=0.454973 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=8.004 mas, bpa=-4.356 degrees ! Estimated noise=1.3484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232132 Jy ! Component: 100 - total flux cleaned = 0.000234245 Jy ! Component: 150 - total flux cleaned = 0.000247789 Jy ! Component: 200 - total flux cleaned = 0.000258715 Jy ! Total flux subtracted in 200 components = 0.000258715 Jy ! Clean residual min=-0.002686 max=0.002370 Jy/beam ! Clean residual mean=-0.000005 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0589602 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0589602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087042Jy sigma=0.454933 ! Fit after self-cal, rms=0.087063Jy sigma=0.454923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101952 Jy ! Component: 100 - total flux cleaned = -8.9767e-05 Jy ! Component: 150 - total flux cleaned = -7.91113e-05 Jy ! Component: 200 - total flux cleaned = -6.97194e-05 Jy ! Total flux subtracted in 200 components = -6.97194e-05 Jy ! Clean residual min=-0.002687 max=0.002343 Jy/beam ! Clean residual mean=-0.000006 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0588905 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0588905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087061Jy sigma=0.454904 ! Fit after self-cal, rms=0.087061Jy sigma=0.454901 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087061Jy sigma=0.454901 ! Fit after self-cal, rms=0.086899Jy sigma=0.454889 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.891 mas, bmaj=18.54 mas, bpa=-0.3773 degrees ! Estimated noise=1.6842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485164 Jy ! Component: 100 - total flux cleaned = 0.000498201 Jy ! Component: 150 - total flux cleaned = 0.000518281 Jy ! Component: 200 - total flux cleaned = 0.000533323 Jy ! Total flux subtracted in 200 components = 0.000533323 Jy ! Clean residual min=-0.003214 max=0.002637 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0594238 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 0.0594238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086901Jy sigma=0.454909 ! Fit after self-cal, rms=0.086900Jy sigma=0.454893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.73968e-05 Jy ! Component: 100 - total flux cleaned = -1.59575e-05 Jy ! Component: 150 - total flux cleaned = 1.76372e-06 Jy ! Component: 200 - total flux cleaned = 8.44783e-06 Jy ! Total flux subtracted in 200 components = 8.44783e-06 Jy ! Clean residual min=-0.003202 max=0.002637 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0594323 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.0594323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086902Jy sigma=0.454917 ! Fit after self-cal, rms=0.086897Jy sigma=0.454905 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.968 mas, bpa=-4.336 degrees ! Estimated noise=1.34396 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.968 at -4.336 degrees (North through East) ! Clean map min=-0.0025681 max=0.055165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.892 mas, bpa=-6.247 degrees ! Estimated noise=1.737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431844 Jy ! Component: 100 - total flux cleaned = 0.0531856 Jy ! Component: 150 - total flux cleaned = 0.0568796 Jy ! Component: 200 - total flux cleaned = 0.057941 Jy ! Total flux subtracted in 200 components = 0.057941 Jy ! Clean residual min=-0.003425 max=0.003072 Jy/beam ! Clean residual mean=-0.000004 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.057941 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.057941 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.968 mas, bpa=-4.336 degrees ! Estimated noise=1.34396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000815416 Jy ! Component: 100 - total flux cleaned = 0.000965507 Jy ! Component: 150 - total flux cleaned = 0.00105319 Jy ! Component: 200 - total flux cleaned = 0.00107537 Jy ! Total flux subtracted in 200 components = 0.00107537 Jy ! Clean residual min=-0.002683 max=0.002335 Jy/beam ! Clean residual mean=-0.000005 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0590163 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.0590163 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.891 mas, bmaj=18.54 mas, bpa=-0.3773 degrees ! Estimated noise=1.6842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372611 Jy ! Component: 100 - total flux cleaned = 0.000389482 Jy ! Component: 150 - total flux cleaned = 0.000389838 Jy ! Component: 200 - total flux cleaned = 0.000401312 Jy ! Total flux subtracted in 200 components = 0.000401312 Jy ! Clean residual min=-0.003185 max=0.002640 Jy/beam ! Clean residual mean=-0.000009 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0594176 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.27707e-06 Jy ! Component: 100 - total flux cleaned = 8.01698e-06 Jy ! Component: 150 - total flux cleaned = 1.35099e-05 Jy ! Component: 200 - total flux cleaned = 1.34558e-05 Jy ! Total flux subtracted in 200 components = 1.34558e-05 Jy ! Clean residual min=-0.003200 max=0.002643 Jy/beam ! Clean residual mean=-0.000009 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0594311 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.0594311 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.968 mas, bpa=-4.336 degrees ! Estimated noise=1.34396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313073 Jy ! Component: 100 - total flux cleaned = -0.000328972 Jy ! Component: 150 - total flux cleaned = -0.000329106 Jy ! Component: 200 - total flux cleaned = -0.000305253 Jy ! Total flux subtracted in 200 components = -0.000305253 Jy ! Clean residual min=-0.002717 max=0.002356 Jy/beam ! Clean residual mean=-0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0591258 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0591258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086898Jy sigma=0.454900 ! Fit after self-cal, rms=0.086904Jy sigma=0.454887 wmodel J0430-2507_S_map.mod ! Writing 44 model components to file: J0430-2507_S_map.mod wobs J0430-2507_S_uvs.fits ! Writing UV FITS file: J0430-2507_S_uvs.fits wwins J0430-2507_S_map.win ! wwins: Wrote 1 windows to J0430-2507_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102424 Jy ! Component: 100 - total flux cleaned = -0.00123693 Jy ! Component: 150 - total flux cleaned = -0.00123816 Jy ! Component: 200 - total flux cleaned = -0.00120082 Jy ! Component: 250 - total flux cleaned = -0.00105857 Jy ! Component: 300 - total flux cleaned = -0.00102528 Jy ! Component: 350 - total flux cleaned = -0.00102539 Jy ! Component: 400 - total flux cleaned = -0.000993406 Jy ! Component: 450 - total flux cleaned = -0.000961276 Jy ! Component: 500 - total flux cleaned = -0.000869391 Jy ! Component: 550 - total flux cleaned = -0.000899131 Jy ! Component: 600 - total flux cleaned = -0.000869392 Jy ! Component: 650 - total flux cleaned = -0.000840144 Jy ! Component: 700 - total flux cleaned = -0.000868485 Jy ! Component: 750 - total flux cleaned = -0.000950796 Jy ! Component: 800 - total flux cleaned = -0.000922992 Jy ! Component: 850 - total flux cleaned = -0.000949422 Jy ! Component: 900 - total flux cleaned = -0.000871476 Jy ! Component: 950 - total flux cleaned = -0.00100063 Jy ! Component: 1000 - total flux cleaned = -0.00100079 Jy ! Component: 1050 - total flux cleaned = -0.00105086 Jy ! Component: 1100 - total flux cleaned = -0.00119775 Jy ! Component: 1150 - total flux cleaned = -0.00110015 Jy ! Component: 1200 - total flux cleaned = -0.00112426 Jy ! Component: 1250 - total flux cleaned = -0.00126411 Jy ! Component: 1300 - total flux cleaned = -0.00117173 Jy ! Component: 1350 - total flux cleaned = -0.00133117 Jy ! Component: 1400 - total flux cleaned = -0.00137598 Jy ! Component: 1450 - total flux cleaned = -0.00142076 Jy ! Component: 1500 - total flux cleaned = -0.00155215 Jy ! Component: 1550 - total flux cleaned = -0.00161677 Jy ! Component: 1600 - total flux cleaned = -0.00170189 Jy ! Component: 1650 - total flux cleaned = -0.00174425 Jy ! Component: 1700 - total flux cleaned = -0.00176529 Jy ! Component: 1750 - total flux cleaned = -0.0018062 Jy ! Component: 1800 - total flux cleaned = -0.00178596 Jy ! Component: 1850 - total flux cleaned = -0.00176622 Jy ! Component: 1900 - total flux cleaned = -0.00182619 Jy ! Component: 1950 - total flux cleaned = -0.00182615 Jy ! Component: 2000 - total flux cleaned = -0.00182595 Jy ! Component: 2050 - total flux cleaned = -0.00184494 Jy ! Component: 2100 - total flux cleaned = -0.00186408 Jy ! Component: 2150 - total flux cleaned = -0.00184541 Jy ! Component: 2200 - total flux cleaned = -0.00188288 Jy ! Component: 2250 - total flux cleaned = -0.00188266 Jy ! Component: 2300 - total flux cleaned = -0.0018462 Jy ! Component: 2350 - total flux cleaned = -0.00188247 Jy ! Component: 2400 - total flux cleaned = -0.00188263 Jy ! Component: 2450 - total flux cleaned = -0.00186489 Jy ! Component: 2500 - total flux cleaned = -0.00184724 Jy ! Component: 2550 - total flux cleaned = -0.00184719 Jy ! Component: 2600 - total flux cleaned = -0.00179525 Jy ! Component: 2650 - total flux cleaned = -0.00169262 Jy ! Component: 2700 - total flux cleaned = -0.00167571 Jy ! Component: 2750 - total flux cleaned = -0.00159146 Jy ! Component: 2800 - total flux cleaned = -0.00155805 Jy ! Component: 2850 - total flux cleaned = -0.00154158 Jy ! Component: 2900 - total flux cleaned = -0.00150893 Jy ! Component: 2950 - total flux cleaned = -0.00144379 Jy ! Component: 3000 - total flux cleaned = -0.00134693 Jy ! Component: 3050 - total flux cleaned = -0.00141108 Jy ! Component: 3100 - total flux cleaned = -0.0013951 Jy ! Component: 3150 - total flux cleaned = -0.00131597 Jy ! Component: 3200 - total flux cleaned = -0.00131598 Jy ! Component: 3250 - total flux cleaned = -0.00133152 Jy ! Component: 3300 - total flux cleaned = -0.00120761 Jy ! Component: 3350 - total flux cleaned = -0.00114618 Jy ! Component: 3400 - total flux cleaned = -0.00113086 Jy ! Component: 3450 - total flux cleaned = -0.00108564 Jy ! Component: 3500 - total flux cleaned = -0.00108583 Jy ! Component: 3550 - total flux cleaned = -0.00110062 Jy ! Component: 3600 - total flux cleaned = -0.00105614 Jy ! Component: 3650 - total flux cleaned = -0.00104145 Jy ! Component: 3700 - total flux cleaned = -0.00107068 Jy ! Component: 3750 - total flux cleaned = -0.00101247 Jy ! Component: 3800 - total flux cleaned = -0.00102685 Jy ! Component: 3850 - total flux cleaned = -0.00104106 Jy ! Component: 3900 - total flux cleaned = -0.00101258 Jy ! Component: 3950 - total flux cleaned = -0.00101271 Jy ! Component: 4000 - total flux cleaned = -0.00101279 Jy ! Component: 4050 - total flux cleaned = -0.00105481 Jy ! Total flux subtracted in 4096 components = -0.00104101 Jy ! Clean residual min=-0.000789 max=0.001120 Jy/beam ! Clean residual mean=0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.0580848 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 328 components and 0.0580848 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0430-2507_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.968 at -4.336 degrees (North through East) ! Clean map min=-0.0017879 max=0.054964 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0430-2507_S_map.fits wmodel /image_prod/ug002_uva//J0430-2507_S_map.mod ! Writing 328 model components to file: /image_prod/ug002_uva//J0430-2507_S_map.mod wobs /image_prod/ug002_uva//J0430-2507_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0430-2507_S_uvs.fits wwins /image_prod/ug002_uva//J0430-2507_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0430-2507_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0549637 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253548 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.3839 1.3839 2.76781 5.53561 11.0712 22.1425 44.2849 88.5698 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 216.778 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0430-2507_S_dfm.log closed on Wed Mar 4 20:22:35 2020