! Started logfile: /image_prod/ug002_uva//J0430-0523_S_dfm.log on Wed Mar  4 20:22:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0430-0523_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0430-0523_S_uva.fits
! AN table 1: 45 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.859259 visibilities/baseline/integration-bin.
! Found source: J0430-0523
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0430-0523_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005038Jy  sigma=8.231147
! Fit after  self-cal, rms=0.930515Jy  sigma=7.628655
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.896 mas, bmaj=15.45 mas, bpa=-17.47 degrees
! Estimated noise=1.75689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532656 Jy
! Component: 100  -  total flux cleaned = 0.0655733 Jy
! Total flux subtracted in 100 components = 0.0655733 Jy
! Clean residual min=-0.003948 max=0.004659 Jy/beam
! Clean residual mean=-0.000011 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.0655733 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0655733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066989Jy  sigma=0.471932
! Fit after  self-cal, rms=0.066785Jy  sigma=0.469775
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=15.99 mas, bpa=-16.75 degrees
! Estimated noise=1.37495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545547 Jy
! Component: 100  -  total flux cleaned = 0.00517328 Jy
! Component: 150  -  total flux cleaned = 0.00494185 Jy
! Component: 200  -  total flux cleaned = 0.00457212 Jy
! Total flux subtracted in 200 components = 0.00457212 Jy
! Clean residual min=-0.003075 max=0.003685 Jy/beam
! Clean residual mean=-0.000014 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.0701454 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.0701454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065937Jy  sigma=0.464456
! Fit after  self-cal, rms=0.065909Jy  sigma=0.464396
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.422 x 15.99 at -16.75 degrees (North through East)
! Clean map  min=-0.003005  max=0.071041 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.89     HN        1.02     KP        0.93     
!   LA        1.02     MK        1.08     NL        1.04     OV        1.06     
!   PT        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        0.95     HN        0.99     KP        0.97     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.89     
!   PT        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.94     HN        1.13     KP        0.96     
!   LA        1.11     MK        0.98     NL        0.90     OV        0.98     
!   PT        1.18     
! 
! 
! Fit before self-cal, rms=0.065909Jy  sigma=0.464396
! Fit after  self-cal, rms=0.062467Jy  sigma=0.459693
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.457 mas, bmaj=15.43 mas, bpa=-16.66 degrees
! Estimated noise=1.35055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000364763 Jy
! Component: 100  -  total flux cleaned = -0.000393293 Jy
! Component: 150  -  total flux cleaned = -0.00044102 Jy
! Component: 200  -  total flux cleaned = -0.000552056 Jy
! Total flux subtracted in 200 components = -0.000552056 Jy
! Clean residual min=-0.002885 max=0.003197 Jy/beam
! Clean residual mean=-0.000006 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.0695934 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 48 components and 0.0695934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062428Jy  sigma=0.459495
! Fit after  self-cal, rms=0.062476Jy  sigma=0.459253
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062476Jy  sigma=0.459253
! Fit after  self-cal, rms=0.064787Jy  sigma=0.453468
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=15.45 mas, bpa=-16.57 degrees
! Estimated noise=1.36399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87158e-05 Jy
! Component: 100  -  total flux cleaned = 0.000134792 Jy
! Component: 150  -  total flux cleaned = 0.000173597 Jy
! Component: 200  -  total flux cleaned = 0.00019135 Jy
! Total flux subtracted in 200 components = 0.00019135 Jy
! Clean residual min=-0.002165 max=0.002434 Jy/beam
! Clean residual mean=-0.000005 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.0697847 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.0697847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064770Jy  sigma=0.453346
! Fit after  self-cal, rms=0.064901Jy  sigma=0.453098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.4075e-05 Jy
! Component: 100  -  total flux cleaned = -5.00505e-05 Jy
! Component: 150  -  total flux cleaned = -3.52827e-05 Jy
! Component: 200  -  total flux cleaned = -3.56001e-05 Jy
! Total flux subtracted in 200 components = -3.56001e-05 Jy
! Clean residual min=-0.002172 max=0.002479 Jy/beam
! Clean residual mean=-0.000006 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.0697491 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 76 components and 0.0697491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064891Jy  sigma=0.453048
! Fit after  self-cal, rms=0.064891Jy  sigma=0.453043
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064891Jy  sigma=0.453043
! Fit after  self-cal, rms=0.067574Jy  sigma=0.452255
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.462 mas, bmaj=15.39 mas, bpa=-16.55 degrees
! Estimated noise=1.36168 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109591 Jy
! Component: 100  -  total flux cleaned = -3.01792e-05 Jy
! Component: 150  -  total flux cleaned = 4.14695e-05 Jy
! Component: 200  -  total flux cleaned = 4.16246e-05 Jy
! Total flux subtracted in 200 components = 4.16246e-05 Jy
! Clean residual min=-0.001989 max=0.002444 Jy/beam
! Clean residual mean=-0.000006 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.0697908 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.0697908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067564Jy  sigma=0.452208
! Fit after  self-cal, rms=0.067602Jy  sigma=0.452170
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.95875e-05 Jy
! Component: 100  -  total flux cleaned = -4.94653e-05 Jy
! Component: 150  -  total flux cleaned = -3.69723e-05 Jy
! Component: 200  -  total flux cleaned = -3.70839e-05 Jy
! Total flux subtracted in 200 components = -3.70839e-05 Jy
! Clean residual min=-0.002009 max=0.002455 Jy/beam
! Clean residual mean=-0.000006 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.0697537 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 0.0697537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067595Jy  sigma=0.452140
! Fit after  self-cal, rms=0.067595Jy  sigma=0.452138
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067595Jy  sigma=0.452138
! Fit after  self-cal, rms=0.068155Jy  sigma=0.452128
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.764 mas, bmaj=16.43 mas, bpa=-7.397 degrees
! Estimated noise=1.59451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.05146e-05 Jy
! Component: 100  -  total flux cleaned = 1.59369e-05 Jy
! Component: 150  -  total flux cleaned = -2.54013e-05 Jy
! Component: 200  -  total flux cleaned = -5.22117e-05 Jy
! Total flux subtracted in 200 components = -5.22117e-05 Jy
! Clean residual min=-0.002161 max=0.002487 Jy/beam
! Clean residual mean=-0.000010 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0697015 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 106 components and 0.0697015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068152Jy  sigma=0.452136
! Fit after  self-cal, rms=0.068157Jy  sigma=0.452124
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.67884e-05 Jy
! Component: 100  -  total flux cleaned = 6.59284e-06 Jy
! Component: 150  -  total flux cleaned = -1.33501e-06 Jy
! Component: 200  -  total flux cleaned = -1.67132e-05 Jy
! Total flux subtracted in 200 components = -1.67132e-05 Jy
! Clean residual min=-0.002159 max=0.002489 Jy/beam
! Clean residual mean=-0.000010 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.0696848 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 115 components and 0.0696848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068156Jy  sigma=0.452126
! Fit after  self-cal, rms=0.068157Jy  sigma=0.452120
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.467 mas, bmaj=15.37 mas, bpa=-16.53 degrees
! Estimated noise=1.36125 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.467 x 15.37 at -16.53 degrees (North through East)
! Clean map  min=-0.0020089  max=0.070146 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.925 mas, bmaj=14.9 mas, bpa=-17.33 degrees
! Estimated noise=1.76406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0535208 Jy
! Component: 100  -  total flux cleaned = 0.0656207 Jy
! Component: 150  -  total flux cleaned = 0.0701009 Jy
! Component: 200  -  total flux cleaned = 0.0703536 Jy
! Total flux subtracted in 200 components = 0.0703536 Jy
! Clean residual min=-0.003256 max=0.003177 Jy/beam
! Clean residual mean=-0.000007 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0703537 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0703537 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.467 mas, bmaj=15.37 mas, bpa=-16.53 degrees
! Estimated noise=1.36125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111538 Jy
! Component: 100  -  total flux cleaned = 0.000600291 Jy
! Component: 150  -  total flux cleaned = 0.000230834 Jy
! Component: 200  -  total flux cleaned = -3.26388e-05 Jy
! Total flux subtracted in 200 components = -3.26388e-05 Jy
! Clean residual min=-0.002096 max=0.002554 Jy/beam
! Clean residual mean=-0.000007 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.070321 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 44 components and 0.070321 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.764 mas, bmaj=16.43 mas, bpa=-7.397 degrees
! Estimated noise=1.59451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131592 Jy
! Component: 100  -  total flux cleaned = -6.53127e-05 Jy
! Component: 150  -  total flux cleaned = -0.000202163 Jy
! Component: 200  -  total flux cleaned = -0.000317194 Jy
! Total flux subtracted in 200 components = -0.000317194 Jy
! Clean residual min=-0.002209 max=0.002412 Jy/beam
! Clean residual mean=-0.000011 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.0700038 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.64244e-05 Jy
! Component: 100  -  total flux cleaned = -0.000177997 Jy
! Component: 150  -  total flux cleaned = -0.000247293 Jy
! Component: 200  -  total flux cleaned = -0.000295479 Jy
! Total flux subtracted in 200 components = -0.000295479 Jy
! Clean residual min=-0.002186 max=0.002473 Jy/beam
! Clean residual mean=-0.000010 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0697083 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 75 components and 0.0697083 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.467 mas, bmaj=15.37 mas, bpa=-16.53 degrees
! Estimated noise=1.36125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168448 Jy
! Component: 100  -  total flux cleaned = 0.000123353 Jy
! Component: 150  -  total flux cleaned = 6.2383e-05 Jy
! Component: 200  -  total flux cleaned = 6.2825e-05 Jy
! Total flux subtracted in 200 components = 6.2825e-05 Jy
! Clean residual min=-0.002119 max=0.002487 Jy/beam
! Clean residual mean=-0.000006 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.0697711 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 85 components and 0.0697711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068167Jy  sigma=0.452234
! Fit after  self-cal, rms=0.068166Jy  sigma=0.452212
wmodel J0430-0523_S_map.mod
! Writing 85 model components to file: J0430-0523_S_map.mod
wobs   J0430-0523_S_uvs.fits
! Writing UV FITS file: J0430-0523_S_uvs.fits
wwins  J0430-0523_S_map.win
! wwins: Wrote 1 windows to J0430-0523_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108783 Jy
! Component: 100  -  total flux cleaned = 0.00151837 Jy
! Component: 150  -  total flux cleaned = 0.00166429 Jy
! Component: 200  -  total flux cleaned = 0.00180272 Jy
! Component: 250  -  total flux cleaned = 0.00166968 Jy
! Component: 300  -  total flux cleaned = 0.00166904 Jy
! Component: 350  -  total flux cleaned = 0.00163766 Jy
! Component: 400  -  total flux cleaned = 0.00160691 Jy
! Component: 450  -  total flux cleaned = 0.00154754 Jy
! Component: 500  -  total flux cleaned = 0.00146059 Jy
! Component: 550  -  total flux cleaned = 0.00148948 Jy
! Component: 600  -  total flux cleaned = 0.00140543 Jy
! Component: 650  -  total flux cleaned = 0.00135145 Jy
! Component: 700  -  total flux cleaned = 0.0013512 Jy
! Component: 750  -  total flux cleaned = 0.00129817 Jy
! Component: 800  -  total flux cleaned = 0.00127231 Jy
! Component: 850  -  total flux cleaned = 0.00114605 Jy
! Component: 900  -  total flux cleaned = 0.00107166 Jy
! Component: 950  -  total flux cleaned = 0.00102378 Jy
! Component: 1000  -  total flux cleaned = 0.0010242 Jy
! Component: 1050  -  total flux cleaned = 0.00102414 Jy
! Component: 1100  -  total flux cleaned = 0.00104732 Jy
! Component: 1150  -  total flux cleaned = 0.00100175 Jy
! Component: 1200  -  total flux cleaned = 0.00104652 Jy
! Component: 1250  -  total flux cleaned = 0.00104642 Jy
! Component: 1300  -  total flux cleaned = 0.00102477 Jy
! Component: 1350  -  total flux cleaned = 0.00102458 Jy
! Component: 1400  -  total flux cleaned = 0.000981887 Jy
! Component: 1450  -  total flux cleaned = 0.000918707 Jy
! Component: 1500  -  total flux cleaned = 0.000898251 Jy
! Component: 1550  -  total flux cleaned = 0.000775961 Jy
! Component: 1600  -  total flux cleaned = 0.000815968 Jy
! Component: 1650  -  total flux cleaned = 0.000755932 Jy
! Component: 1700  -  total flux cleaned = 0.000638348 Jy
! Component: 1750  -  total flux cleaned = 0.000541518 Jy
! Component: 1800  -  total flux cleaned = 0.000541938 Jy
! Component: 1850  -  total flux cleaned = 0.000447169 Jy
! Component: 1900  -  total flux cleaned = 0.000334454 Jy
! Component: 1950  -  total flux cleaned = 0.000223297 Jy
! Component: 2000  -  total flux cleaned = 0.000205063 Jy
! Component: 2050  -  total flux cleaned = 0.000150412 Jy
! Component: 2100  -  total flux cleaned = -1.09535e-05 Jy
! Component: 2150  -  total flux cleaned = -4.64339e-05 Jy
! Component: 2200  -  total flux cleaned = -0.000116679 Jy
! Component: 2250  -  total flux cleaned = -0.000221335 Jy
! Component: 2300  -  total flux cleaned = -0.000307413 Jy
! Component: 2350  -  total flux cleaned = -0.000358593 Jy
! Component: 2400  -  total flux cleaned = -0.000409192 Jy
! Component: 2450  -  total flux cleaned = -0.000526144 Jy
! Component: 2500  -  total flux cleaned = -0.000493009 Jy
! Component: 2550  -  total flux cleaned = -0.000608002 Jy
! Component: 2600  -  total flux cleaned = -0.000624384 Jy
! Component: 2650  -  total flux cleaned = -0.000737191 Jy
! Component: 2700  -  total flux cleaned = -0.00072105 Jy
! Component: 2750  -  total flux cleaned = -0.00076866 Jy
! Component: 2800  -  total flux cleaned = -0.00083166 Jy
! Component: 2850  -  total flux cleaned = -0.000831592 Jy
! Component: 2900  -  total flux cleaned = -0.000970644 Jy
! Component: 2950  -  total flux cleaned = -0.000940055 Jy
! Component: 3000  -  total flux cleaned = -0.000955545 Jy
! Component: 3050  -  total flux cleaned = -0.00109113 Jy
! Component: 3100  -  total flux cleaned = -0.00112078 Jy
! Component: 3150  -  total flux cleaned = -0.00113552 Jy
! Component: 3200  -  total flux cleaned = -0.00119424 Jy
! Component: 3250  -  total flux cleaned = -0.00117973 Jy
! Component: 3300  -  total flux cleaned = -0.00117978 Jy
! Component: 3350  -  total flux cleaned = -0.0012515 Jy
! Component: 3400  -  total flux cleaned = -0.00125151 Jy
! Component: 3450  -  total flux cleaned = -0.00125154 Jy
! Component: 3500  -  total flux cleaned = -0.00126537 Jy
! Component: 3550  -  total flux cleaned = -0.00127928 Jy
! Component: 3600  -  total flux cleaned = -0.0012792 Jy
! Component: 3650  -  total flux cleaned = -0.00130671 Jy
! Component: 3700  -  total flux cleaned = -0.00126605 Jy
! Component: 3750  -  total flux cleaned = -0.00127966 Jy
! Component: 3800  -  total flux cleaned = -0.00133335 Jy
! Component: 3850  -  total flux cleaned = -0.00132001 Jy
! Component: 3900  -  total flux cleaned = -0.00134657 Jy
! Component: 3950  -  total flux cleaned = -0.00132009 Jy
! Component: 4000  -  total flux cleaned = -0.00135922 Jy
! Component: 4050  -  total flux cleaned = -0.00132028 Jy
! Total flux subtracted in 4096 components = -0.00134603 Jy
! Clean residual min=-0.000656 max=0.000899 Jy/beam
! Clean residual mean=-0.000002 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0684251 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 377 components and 0.0684251 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0430-0523_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.467 x 15.37 at -16.53 degrees (North through East)
! Clean map  min=-0.0015339  max=0.070176 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0430-0523_S_map.fits
wmodel /image_prod/ug002_uva//J0430-0523_S_map.mod
! Writing 377 model components to file: /image_prod/ug002_uva//J0430-0523_S_map.mod
wobs   /image_prod/ug002_uva//J0430-0523_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0430-0523_S_uvs.fits
wwins  /image_prod/ug002_uva//J0430-0523_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0430-0523_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0701763 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000244592 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04562 1.04562 2.09124 4.18248 8.36495 16.7299 33.4598 66.9196
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  286.911 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0430-0523_S_dfm.log closed on Wed Mar  4 20:22:26 2020