! Started logfile: /image_prod/ug002_uva//J0429+3319_X_dfm.log on Wed Mar 4 20:22:16 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0429+3319_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0429+3319_X_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.744444 visibilities/baseline/integration-bin. ! Found source: J0429+3319 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32160 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0429+3319_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.028610Jy sigma=8.714940 ! Fit after self-cal, rms=0.796715Jy sigma=6.727920 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7335 mas, bmaj=1.4 mas, bpa=-8.434 degrees ! Estimated noise=0.954998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149154 Jy ! Component: 100 - total flux cleaned = 0.197106 Jy ! Total flux subtracted in 100 components = 0.197106 Jy ! Clean residual min=-0.012307 max=0.054191 Jy/beam ! Clean residual mean=0.000004 rms=0.003186 Jy/beam ! Combined flux in latest and established models = 0.197106 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.197106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103584Jy sigma=0.843622 ! Fit after self-cal, rms=0.103475Jy sigma=0.842882 ! Inverting map ! Added new window around map position (-5.4, 4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460788 Jy ! Component: 100 - total flux cleaned = 0.069408 Jy ! Total flux subtracted in 100 components = 0.069408 Jy ! Clean residual min=-0.007302 max=0.013350 Jy/beam ! Clean residual mean=0.000004 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.266514 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.266514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077348Jy sigma=0.620582 ! Fit after self-cal, rms=0.075268Jy sigma=0.602289 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185056 Jy ! Component: 100 - total flux cleaned = 0.0311511 Jy ! Total flux subtracted in 100 components = 0.0311511 Jy ! Clean residual min=-0.005495 max=0.010962 Jy/beam ! Clean residual mean=0.000004 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.297665 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.297665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068444Jy sigma=0.543990 ! Fit after self-cal, rms=0.068263Jy sigma=0.542274 ! Inverting map ! Added new window around map position (-1, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115573 Jy ! Component: 100 - total flux cleaned = 0.0199681 Jy ! Total flux subtracted in 100 components = 0.0199681 Jy ! Clean residual min=-0.005681 max=0.007700 Jy/beam ! Clean residual mean=0.000003 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.317633 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.317633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065095Jy sigma=0.515381 ! Fit after self-cal, rms=0.064997Jy sigma=0.514694 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817559 Jy ! Component: 100 - total flux cleaned = 0.0145388 Jy ! Total flux subtracted in 100 components = 0.0145388 Jy ! Clean residual min=-0.005207 max=0.004960 Jy/beam ! Clean residual mean=0.000002 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.332172 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.332172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063211Jy sigma=0.499868 ! Fit after self-cal, rms=0.063179Jy sigma=0.499634 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.93 mas, bmaj=1.697 mas, bpa=-6.376 degrees ! Estimated noise=0.473982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00902807 Jy ! Component: 100 - total flux cleaned = 0.0158076 Jy ! Component: 150 - total flux cleaned = 0.0212701 Jy ! Component: 200 - total flux cleaned = 0.0257423 Jy ! Total flux subtracted in 200 components = 0.0257423 Jy ! Clean residual min=-0.004514 max=0.004643 Jy/beam ! Clean residual mean=-0.000002 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.357915 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 64 components and 0.357915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061185Jy sigma=0.483527 ! Fit after self-cal, rms=0.061128Jy sigma=0.483069 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.93 x 1.697 at -6.376 degrees (North through East) ! Clean map min=-0.0043733 max=0.20167 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.01 KP 1.03 ! LA 0.98 MK 1.01 NL 1.09 OV 1.01 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.97 KP 1.03 ! LA 0.99 MK 1.00 NL 1.08 OV 0.98 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.99 KP 1.03 ! LA 0.97 MK 1.02 NL 1.07 OV 0.99 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.02 KP 1.02 ! LA 1.01 MK 1.03 NL 1.05 OV 0.99 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 5. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.97 KP 1.04 ! LA 0.96 MK 1.01 NL 1.07 OV 1.00 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 6. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.97 KP 1.02 ! LA 0.95 MK 0.98 NL 1.09 OV 1.00 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 7. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.96 KP 1.04 ! LA 0.96 MK 1.09 NL 1.08 OV 0.97 ! PT 0.88 SC 1.03 ! ! ! Correcting IF 8. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.98 KP 1.05 ! LA 0.98 MK 1.01 NL 1.06 OV 1.02 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 9. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.02 KP 1.00 ! LA 0.99 MK 1.00 NL 1.08 OV 0.99 ! PT 0.90 SC 1.08 ! ! ! Correcting IF 10. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.99 KP 1.03 ! LA 0.96 MK 1.04 NL 1.10 OV 1.02 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 11. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.97 KP 1.04 ! LA 0.99 MK 1.00 NL 1.05 OV 0.99 ! PT 0.93 SC 1.08 ! ! ! Correcting IF 12. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.00 KP 1.05 ! LA 0.96 MK 1.03 NL 1.11 OV 1.03 ! PT 0.89 SC 1.04 ! ! ! Fit before self-cal, rms=0.061128Jy sigma=0.483069 ! Fit after self-cal, rms=0.058143Jy sigma=0.463536 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9326 mas, bmaj=1.704 mas, bpa=-6.696 degrees ! Estimated noise=0.475077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131868 Jy ! Component: 100 - total flux cleaned = 0.00216079 Jy ! Component: 150 - total flux cleaned = 0.00291379 Jy ! Component: 200 - total flux cleaned = 0.00354137 Jy ! Total flux subtracted in 200 components = 0.00354137 Jy ! Clean residual min=-0.002283 max=0.002527 Jy/beam ! Clean residual mean=0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.361456 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.361456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057835Jy sigma=0.460765 ! Fit after self-cal, rms=0.057804Jy sigma=0.460494 ! Inverting map ! Added new window around map position (-0.2, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176247 Jy ! Component: 100 - total flux cleaned = 0.00241368 Jy ! Component: 150 - total flux cleaned = 0.00303113 Jy ! Component: 200 - total flux cleaned = 0.00337895 Jy ! Total flux subtracted in 200 components = 0.00337895 Jy ! Clean residual min=-0.002034 max=0.001992 Jy/beam ! Clean residual mean=0.000002 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.364835 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 100 components and 0.364835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057666Jy sigma=0.459325 ! Fit after self-cal, rms=0.057660Jy sigma=0.459274 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057660Jy sigma=0.459274 ! Fit after self-cal, rms=0.057012Jy sigma=0.456163 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9302 mas, bmaj=1.71 mas, bpa=-6.399 degrees ! Estimated noise=0.474788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.22932e-05 Jy ! Component: 100 - total flux cleaned = 0.000248314 Jy ! Component: 150 - total flux cleaned = 0.000480729 Jy ! Component: 200 - total flux cleaned = 0.000480833 Jy ! Total flux subtracted in 200 components = 0.000480833 Jy ! Clean residual min=-0.001332 max=0.001630 Jy/beam ! Clean residual mean=0.000000 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.365316 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.365316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056914Jy sigma=0.455329 ! Fit after self-cal, rms=0.056908Jy sigma=0.455268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, -43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106259 Jy ! Component: 100 - total flux cleaned = 0.00122371 Jy ! Component: 150 - total flux cleaned = 0.0012592 Jy ! Component: 200 - total flux cleaned = 0.00125802 Jy ! Total flux subtracted in 200 components = 0.00125802 Jy ! Clean residual min=-0.001308 max=0.001341 Jy/beam ! Clean residual mean=0.000000 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.366574 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 124 components and 0.366574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056851Jy sigma=0.454793 ! Fit after self-cal, rms=0.056847Jy sigma=0.454774 ! Inverting map ! Added new window around map position (-13.2, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120223 Jy ! Component: 100 - total flux cleaned = 0.00171336 Jy ! Component: 150 - total flux cleaned = 0.00182647 Jy ! Component: 200 - total flux cleaned = 0.00187929 Jy ! Total flux subtracted in 200 components = 0.00187929 Jy ! Clean residual min=-0.001283 max=0.001172 Jy/beam ! Clean residual mean=0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.368453 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 141 components and 0.368453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056808Jy sigma=0.454470 ! Fit after self-cal, rms=0.056806Jy sigma=0.454460 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056806Jy sigma=0.454460 ! Fit after self-cal, rms=0.056639Jy sigma=0.454260 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9287 mas, bmaj=1.711 mas, bpa=-6.312 degrees ! Estimated noise=0.474423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206712 Jy ! Component: 100 - total flux cleaned = -1.46026e-05 Jy ! Component: 150 - total flux cleaned = 0.000183675 Jy ! Component: 200 - total flux cleaned = 0.000365362 Jy ! Total flux subtracted in 200 components = 0.000365362 Jy ! Clean residual min=-0.001185 max=0.001131 Jy/beam ! Clean residual mean=-0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.368819 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 149 components and 0.368819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056605Jy sigma=0.453988 ! Fit after self-cal, rms=0.056602Jy sigma=0.453974 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233419 Jy ! Component: 100 - total flux cleaned = 0.000305155 Jy ! Component: 150 - total flux cleaned = 0.000350573 Jy ! Component: 200 - total flux cleaned = 0.000393943 Jy ! Total flux subtracted in 200 components = 0.000393943 Jy ! Clean residual min=-0.001166 max=0.001075 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.369213 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 159 components and 0.369213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056584Jy sigma=0.453839 ! Fit after self-cal, rms=0.056583Jy sigma=0.453835 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056583Jy sigma=0.453835 ! Fit after self-cal, rms=0.056524Jy sigma=0.453785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=2.672 mas, bpa=-1.873 degrees ! Estimated noise=0.592517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510535 Jy ! Component: 100 - total flux cleaned = 0.000781736 Jy ! Component: 150 - total flux cleaned = 0.00104689 Jy ! Component: 200 - total flux cleaned = 0.00121333 Jy ! Total flux subtracted in 200 components = 0.00121333 Jy ! Clean residual min=-0.000984 max=0.001008 Jy/beam ! Clean residual mean=-0.000000 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.370426 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 174 components and 0.370426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056515Jy sigma=0.453698 ! Fit after self-cal, rms=0.056513Jy sigma=0.453679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111776 Jy ! Component: 100 - total flux cleaned = 0.000166926 Jy ! Component: 150 - total flux cleaned = 0.000240685 Jy ! Component: 200 - total flux cleaned = 0.000263359 Jy ! Total flux subtracted in 200 components = 0.000263359 Jy ! Clean residual min=-0.000977 max=0.000968 Jy/beam ! Clean residual mean=-0.000000 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.370689 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 189 components and 0.370689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056510Jy sigma=0.453652 ! Fit after self-cal, rms=0.056509Jy sigma=0.453649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9279 mas, bmaj=1.711 mas, bpa=-6.287 degrees ! Estimated noise=0.474353 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9279 x 1.711 at -6.287 degrees (North through East) ! Clean map min=-0.00099014 max=0.19982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7347 mas, bmaj=1.414 mas, bpa=-8.159 degrees ! Estimated noise=0.959075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149851 Jy ! Component: 100 - total flux cleaned = 0.211259 Jy ! Component: 150 - total flux cleaned = 0.248029 Jy ! Component: 200 - total flux cleaned = 0.272107 Jy ! Total flux subtracted in 200 components = 0.272107 Jy ! Clean residual min=-0.005741 max=0.013135 Jy/beam ! Clean residual mean=0.000003 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.272107 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.272107 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9279 mas, bmaj=1.711 mas, bpa=-6.287 degrees ! Estimated noise=0.474353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234585 Jy ! Component: 100 - total flux cleaned = 0.0388654 Jy ! Component: 150 - total flux cleaned = 0.0500521 Jy ! Component: 200 - total flux cleaned = 0.0584792 Jy ! Total flux subtracted in 200 components = 0.0584792 Jy ! Clean residual min=-0.002374 max=0.004886 Jy/beam ! Clean residual mean=-0.000002 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.330586 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 0.330586 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648028 Jy ! Component: 100 - total flux cleaned = 0.0115318 Jy ! Component: 150 - total flux cleaned = 0.0156281 Jy ! Component: 200 - total flux cleaned = 0.0190112 Jy ! Total flux subtracted in 200 components = 0.0190112 Jy ! Clean residual min=-0.001455 max=0.002523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.349597 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 67 components and 0.349597 Jy ! Inverting map ! Added new window around map position (-6.2, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292197 Jy ! Component: 100 - total flux cleaned = 0.00530268 Jy ! Component: 150 - total flux cleaned = 0.00729272 Jy ! Component: 200 - total flux cleaned = 0.00899701 Jy ! Total flux subtracted in 200 components = 0.00899701 Jy ! Clean residual min=-0.001213 max=0.001289 Jy/beam ! Clean residual mean=-0.000000 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.358594 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 81 components and 0.358594 Jy ! Inverting map ! Added new window around map position (-0.4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154085 Jy ! Component: 100 - total flux cleaned = 0.002888 Jy ! Component: 150 - total flux cleaned = 0.0040913 Jy ! Component: 200 - total flux cleaned = 0.0048755 Jy ! Total flux subtracted in 200 components = 0.0048755 Jy ! Clean residual min=-0.001129 max=0.001077 Jy/beam ! Clean residual mean=-0.000000 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.36347 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 99 components and 0.36347 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=2.672 mas, bpa=-1.873 degrees ! Estimated noise=0.592517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140411 Jy ! Component: 100 - total flux cleaned = 0.00240489 Jy ! Component: 150 - total flux cleaned = 0.00319923 Jy ! Component: 200 - total flux cleaned = 0.00386085 Jy ! Total flux subtracted in 200 components = 0.00386085 Jy ! Clean residual min=-0.001053 max=0.001016 Jy/beam ! Clean residual mean=-0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.36733 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475913 Jy ! Component: 100 - total flux cleaned = 0.000851453 Jy ! Component: 150 - total flux cleaned = 0.00120084 Jy ! Component: 200 - total flux cleaned = 0.00151109 Jy ! Total flux subtracted in 200 components = 0.00151109 Jy ! Clean residual min=-0.001002 max=0.001017 Jy/beam ! Clean residual mean=0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.368842 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 159 components and 0.368842 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9279 mas, bmaj=1.711 mas, bpa=-6.287 degrees ! Estimated noise=0.474353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110172 Jy ! Component: 100 - total flux cleaned = 1.04684e-05 Jy ! Component: 150 - total flux cleaned = 9.41543e-05 Jy ! Component: 200 - total flux cleaned = 0.00022628 Jy ! Total flux subtracted in 200 components = 0.00022628 Jy ! Clean residual min=-0.001030 max=0.001093 Jy/beam ! Clean residual mean=0.000000 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.369068 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 177 components and 0.369068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056523Jy sigma=0.453765 ! Fit after self-cal, rms=0.056511Jy sigma=0.453702 wmodel J0429+3319_X_map.mod ! Writing 177 model components to file: J0429+3319_X_map.mod wobs J0429+3319_X_uvs.fits ! Writing UV FITS file: J0429+3319_X_uvs.fits wwins J0429+3319_X_map.win ! wwins: Wrote 10 windows to J0429+3319_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266403 Jy ! Component: 100 - total flux cleaned = 0.000460992 Jy ! Component: 150 - total flux cleaned = 0.000596872 Jy ! Component: 200 - total flux cleaned = 0.000695963 Jy ! Component: 250 - total flux cleaned = 0.000775959 Jy ! Component: 300 - total flux cleaned = 0.000885407 Jy ! Component: 350 - total flux cleaned = 0.000977002 Jy ! Component: 400 - total flux cleaned = 0.00108176 Jy ! Component: 450 - total flux cleaned = 0.00119907 Jy ! Component: 500 - total flux cleaned = 0.00130001 Jy ! Component: 550 - total flux cleaned = 0.00141345 Jy ! Component: 600 - total flux cleaned = 0.00152521 Jy ! Component: 650 - total flux cleaned = 0.00162155 Jy ! Component: 700 - total flux cleaned = 0.00174379 Jy ! Component: 750 - total flux cleaned = 0.00183746 Jy ! Component: 800 - total flux cleaned = 0.0018906 Jy ! Component: 850 - total flux cleaned = 0.00198244 Jy ! Component: 900 - total flux cleaned = 0.0020602 Jy ! Component: 950 - total flux cleaned = 0.00212427 Jy ! Component: 1000 - total flux cleaned = 0.00218758 Jy ! Component: 1050 - total flux cleaned = 0.00221269 Jy ! Component: 1100 - total flux cleaned = 0.00226229 Jy ! Component: 1150 - total flux cleaned = 0.00233583 Jy ! Component: 1200 - total flux cleaned = 0.00235989 Jy ! Component: 1250 - total flux cleaned = 0.00237189 Jy ! Component: 1300 - total flux cleaned = 0.00238382 Jy ! Component: 1350 - total flux cleaned = 0.00243091 Jy ! Component: 1400 - total flux cleaned = 0.00239597 Jy ! Component: 1450 - total flux cleaned = 0.00244248 Jy ! Component: 1500 - total flux cleaned = 0.00247676 Jy ! Component: 1550 - total flux cleaned = 0.00249948 Jy ! Component: 1600 - total flux cleaned = 0.00248805 Jy ! Component: 1650 - total flux cleaned = 0.00251034 Jy ! Component: 1700 - total flux cleaned = 0.00251058 Jy ! Component: 1750 - total flux cleaned = 0.00251049 Jy ! Component: 1800 - total flux cleaned = 0.00254317 Jy ! Component: 1850 - total flux cleaned = 0.00256469 Jy ! Component: 1900 - total flux cleaned = 0.00256469 Jy ! Component: 1950 - total flux cleaned = 0.00257539 Jy ! Component: 2000 - total flux cleaned = 0.00260709 Jy ! Component: 2050 - total flux cleaned = 0.00263861 Jy ! Component: 2100 - total flux cleaned = 0.00263863 Jy ! Component: 2150 - total flux cleaned = 0.00265932 Jy ! Component: 2200 - total flux cleaned = 0.00269017 Jy ! Component: 2250 - total flux cleaned = 0.0026799 Jy ! Component: 2300 - total flux cleaned = 0.00271025 Jy ! Component: 2350 - total flux cleaned = 0.00270022 Jy ! Component: 2400 - total flux cleaned = 0.00273028 Jy ! Component: 2450 - total flux cleaned = 0.0027799 Jy ! Component: 2500 - total flux cleaned = 0.00276009 Jy ! Component: 2550 - total flux cleaned = 0.0027896 Jy ! Component: 2600 - total flux cleaned = 0.00280911 Jy ! Component: 2650 - total flux cleaned = 0.00286722 Jy ! Component: 2700 - total flux cleaned = 0.00285747 Jy ! Component: 2750 - total flux cleaned = 0.00288621 Jy ! Component: 2800 - total flux cleaned = 0.00289563 Jy ! Component: 2850 - total flux cleaned = 0.00291457 Jy ! Component: 2900 - total flux cleaned = 0.00294263 Jy ! Component: 2950 - total flux cleaned = 0.00294255 Jy ! Component: 3000 - total flux cleaned = 0.00297051 Jy ! Component: 3050 - total flux cleaned = 0.00297052 Jy ! Component: 3100 - total flux cleaned = 0.00301643 Jy ! Component: 3150 - total flux cleaned = 0.00303463 Jy ! Component: 3200 - total flux cleaned = 0.00305279 Jy ! Component: 3250 - total flux cleaned = 0.00303476 Jy ! Component: 3300 - total flux cleaned = 0.00303486 Jy ! Component: 3350 - total flux cleaned = 0.00305273 Jy ! Component: 3400 - total flux cleaned = 0.00307036 Jy ! Component: 3450 - total flux cleaned = 0.00308794 Jy ! Component: 3500 - total flux cleaned = 0.00311436 Jy ! Component: 3550 - total flux cleaned = 0.00313183 Jy ! Component: 3600 - total flux cleaned = 0.00314048 Jy ! Component: 3650 - total flux cleaned = 0.00317498 Jy ! Component: 3700 - total flux cleaned = 0.00317502 Jy ! Component: 3750 - total flux cleaned = 0.00316652 Jy ! Component: 3800 - total flux cleaned = 0.00322612 Jy ! Component: 3850 - total flux cleaned = 0.00323452 Jy ! Component: 3900 - total flux cleaned = 0.00323455 Jy ! Component: 3950 - total flux cleaned = 0.00326805 Jy ! Component: 4000 - total flux cleaned = 0.00327639 Jy ! Component: 4050 - total flux cleaned = 0.00328467 Jy ! Total flux subtracted in 4096 components = 0.00326819 Jy ! Clean residual min=-0.000512 max=0.000435 Jy/beam ! Clean residual mean=-0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.372336 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 491 components and 0.372336 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0429+3319_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9279 x 1.711 at -6.287 degrees (North through East) ! Clean map min=-0.00072399 max=0.20025 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0429+3319_X_map.fits wmodel /image_prod/ug002_uva//J0429+3319_X_map.mod ! Writing 491 model components to file: /image_prod/ug002_uva//J0429+3319_X_map.mod wobs /image_prod/ug002_uva//J0429+3319_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0429+3319_X_uvs.fits wwins /image_prod/ug002_uva//J0429+3319_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0429+3319_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.200247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.20966 0.20966 0.41932 0.83864 1.67728 3.35456 6.70912 13.4182 26.8365 53.6729 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.2 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1430.89 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0429+3319_X_dfm.log closed on Wed Mar 4 20:22:21 2020