! Started logfile: /image_prod/ug002_uva//J0429+1815_X_dfm.log on Wed Mar  4 20:21:56 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0429+1815_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0429+1815_X_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.985494 visibilities/baseline/integration-bin.
! Found source: J0429+1815
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 38316 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0429+1815_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011035Jy  sigma=9.673531
! Fit after  self-cal, rms=0.894558Jy  sigma=8.531422
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6601 mas, bmaj=1.588 mas, bpa=-1.824 degrees
! Estimated noise=0.762001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0777513 Jy
! Component: 100  -  total flux cleaned = 0.0999673 Jy
! Total flux subtracted in 100 components = 0.0999673 Jy
! Clean residual min=-0.003585 max=0.009710 Jy/beam
! Clean residual mean=-0.000001 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.0999673 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0999673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054411Jy  sigma=0.492345
! Fit after  self-cal, rms=0.054362Jy  sigma=0.491849
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108397 Jy
! Component: 100  -  total flux cleaned = 0.0165132 Jy
! Total flux subtracted in 100 components = 0.0165132 Jy
! Clean residual min=-0.002645 max=0.005382 Jy/beam
! Clean residual mean=-0.000001 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.11648 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.11648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051715Jy  sigma=0.464194
! Fit after  self-cal, rms=0.051725Jy  sigma=0.464098
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00471482 Jy
! Component: 100  -  total flux cleaned = 0.00593058 Jy
! Total flux subtracted in 100 components = 0.00593058 Jy
! Clean residual min=-0.002524 max=0.002929 Jy/beam
! Clean residual mean=-0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.122411 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.122411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051285Jy  sigma=0.460400
! Fit after  self-cal, rms=0.051272Jy  sigma=0.460254
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8709 mas, bmaj=1.885 mas, bpa=-1.425 degrees
! Estimated noise=0.385445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000947877 Jy
! Component: 100  -  total flux cleaned = 0.00114573 Jy
! Component: 150  -  total flux cleaned = 0.00131277 Jy
! Component: 200  -  total flux cleaned = 0.00137388 Jy
! Total flux subtracted in 200 components = 0.00137388 Jy
! Clean residual min=-0.002634 max=0.002602 Jy/beam
! Clean residual mean=-0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.123785 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.123785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051206Jy  sigma=0.459863
! Fit after  self-cal, rms=0.051203Jy  sigma=0.459834
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8709 x 1.885 at -1.425 degrees (North through East)
! Clean map  min=-0.0024979  max=0.10679 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.93     KP        1.07     
!   LA        1.04     MK        1.07     OV        0.93     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.92     KP        1.07     
!   LA        1.02     MK        1.04     OV        0.93     PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.91     KP        1.09     
!   LA        1.04     MK        1.09     OV        0.94     PT        0.94     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.94     KP        1.06     
!   LA        1.05     MK        1.10     OV        0.95     PT        0.94     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.91     KP        1.08     
!   LA        1.04     MK        1.06     OV        0.93     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.93     KP        1.09     
!   LA        1.07     MK        1.09     OV        0.93     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.93     KP        1.08     
!   LA        1.06     MK        1.05     OV        0.92     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.91     KP        1.08     
!   LA        1.03     MK        1.05     OV        0.93     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.91     KP        1.08     
!   LA        1.08     MK        1.05     OV        0.93     PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.96     KP        1.07     
!   LA        1.03     MK        1.04     OV        0.93     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.92     KP        1.07     
!   LA        1.07     MK        1.06     OV        0.93     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.93     KP        1.06     
!   LA        1.05     MK        1.07     OV        0.94     PT        0.95     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.051203Jy  sigma=0.459834
! Fit after  self-cal, rms=0.050412Jy  sigma=0.453089
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8766 mas, bmaj=1.886 mas, bpa=-1.281 degrees
! Estimated noise=0.385179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235978 Jy
! Component: 100  -  total flux cleaned = 0.00373588 Jy
! Component: 150  -  total flux cleaned = 0.00470071 Jy
! Component: 200  -  total flux cleaned = 0.00530395 Jy
! Total flux subtracted in 200 components = 0.00530395 Jy
! Clean residual min=-0.000964 max=0.001061 Jy/beam
! Clean residual mean=0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.129089 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 43 components and 0.129089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050302Jy  sigma=0.451787
! Fit after  self-cal, rms=0.050293Jy  sigma=0.451597
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050293Jy  sigma=0.451597
! Fit after  self-cal, rms=0.050433Jy  sigma=0.450074
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=1.881 mas, bpa=-1.292 degrees
! Estimated noise=0.384998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000813156 Jy
! Component: 100  -  total flux cleaned = 0.00128411 Jy
! Component: 150  -  total flux cleaned = 0.00141831 Jy
! Component: 200  -  total flux cleaned = 0.00150145 Jy
! Total flux subtracted in 200 components = 0.00150145 Jy
! Clean residual min=-0.000769 max=0.000900 Jy/beam
! Clean residual mean=-0.000000 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.13059 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 60 components and 0.13059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050416Jy  sigma=0.449900
! Fit after  self-cal, rms=0.050424Jy  sigma=0.449872
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.2, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000821549 Jy
! Component: 100  -  total flux cleaned = 0.00131167 Jy
! Component: 150  -  total flux cleaned = 0.00158986 Jy
! Component: 200  -  total flux cleaned = 0.00173317 Jy
! Total flux subtracted in 200 components = 0.00173317 Jy
! Clean residual min=-0.000737 max=0.000814 Jy/beam
! Clean residual mean=-0.000000 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.132324 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 78 components and 0.132324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050408Jy  sigma=0.449708
! Fit after  self-cal, rms=0.050406Jy  sigma=0.449699
! Inverting map 
! Added new window around map position (-10.6, 26.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000649649 Jy
! Component: 100  -  total flux cleaned = 0.000825397 Jy
! Component: 150  -  total flux cleaned = 0.000927904 Jy
! Component: 200  -  total flux cleaned = 0.00100942 Jy
! Total flux subtracted in 200 components = 0.00100942 Jy
! Clean residual min=-0.000697 max=0.000672 Jy/beam
! Clean residual mean=-0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.133333 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 93 components and 0.133333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050395Jy  sigma=0.449598
! Fit after  self-cal, rms=0.050394Jy  sigma=0.449594
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050394Jy  sigma=0.449594
! Fit after  self-cal, rms=0.050386Jy  sigma=0.449557
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8771 mas, bmaj=1.88 mas, bpa=-1.343 degrees
! Estimated noise=0.384779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287553 Jy
! Component: 100  -  total flux cleaned = 0.000420249 Jy
! Component: 150  -  total flux cleaned = 0.000485016 Jy
! Component: 200  -  total flux cleaned = 0.000545104 Jy
! Total flux subtracted in 200 components = 0.000545104 Jy
! Clean residual min=-0.000655 max=0.000643 Jy/beam
! Clean residual mean=-0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.133878 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 101 components and 0.133878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050381Jy  sigma=0.449513
! Fit after  self-cal, rms=0.050381Jy  sigma=0.449509
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.22121e-05 Jy
! Component: 100  -  total flux cleaned = 5.14015e-05 Jy
! Component: 150  -  total flux cleaned = 6.01992e-05 Jy
! Component: 200  -  total flux cleaned = 6.90218e-05 Jy
! Total flux subtracted in 200 components = 6.90218e-05 Jy
! Clean residual min=-0.000648 max=0.000642 Jy/beam
! Clean residual mean=-0.000000 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.133947 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 111 components and 0.133947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050378Jy  sigma=0.449485
! Fit after  self-cal, rms=0.050377Jy  sigma=0.449484
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050377Jy  sigma=0.449484
! Fit after  self-cal, rms=0.050340Jy  sigma=0.449479
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.911 mas, bpa=9.744 degrees
! Estimated noise=0.489252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290938 Jy
! Component: 100  -  total flux cleaned = 0.000427016 Jy
! Component: 150  -  total flux cleaned = 0.000542324 Jy
! Component: 200  -  total flux cleaned = 0.000622215 Jy
! Total flux subtracted in 200 components = 0.000622215 Jy
! Clean residual min=-0.000711 max=0.000797 Jy/beam
! Clean residual mean=-0.000000 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.134569 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 120 components and 0.134569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050339Jy  sigma=0.449467
! Fit after  self-cal, rms=0.050339Jy  sigma=0.449464
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.6, 31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535549 Jy
! Component: 100  -  total flux cleaned = 0.000740348 Jy
! Component: 150  -  total flux cleaned = 0.000776143 Jy
! Component: 200  -  total flux cleaned = 0.000756348 Jy
! Total flux subtracted in 200 components = 0.000756348 Jy
! Clean residual min=-0.000666 max=0.000617 Jy/beam
! Clean residual mean=-0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.135326 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 154 components and 0.135326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050334Jy  sigma=0.449408
! Fit after  self-cal, rms=0.050333Jy  sigma=0.449406
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=1.88 mas, bpa=-1.381 degrees
! Estimated noise=0.384544 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8768 x 1.88 at -1.381 degrees (North through East)
! Clean map  min=-0.00057253  max=0.10648 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6686 mas, bmaj=1.584 mas, bpa=-1.804 degrees
! Estimated noise=0.762415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0776222 Jy
! Component: 100  -  total flux cleaned = 0.0996699 Jy
! Component: 150  -  total flux cleaned = 0.110274 Jy
! Component: 200  -  total flux cleaned = 0.116152 Jy
! Total flux subtracted in 200 components = 0.116152 Jy
! Clean residual min=-0.001804 max=0.002970 Jy/beam
! Clean residual mean=0.000000 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.116152 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.116152 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=1.88 mas, bpa=-1.381 degrees
! Estimated noise=0.384544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479555 Jy
! Component: 100  -  total flux cleaned = 0.00762441 Jy
! Component: 150  -  total flux cleaned = 0.00969437 Jy
! Component: 200  -  total flux cleaned = 0.0112655 Jy
! Total flux subtracted in 200 components = 0.0112655 Jy
! Clean residual min=-0.000906 max=0.001124 Jy/beam
! Clean residual mean=0.000001 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.127417 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.127417 Jy
! Inverting map 
! Added new window around map position (-2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128085 Jy
! Component: 100  -  total flux cleaned = 0.00230235 Jy
! Component: 150  -  total flux cleaned = 0.0031519 Jy
! Component: 200  -  total flux cleaned = 0.00384951 Jy
! Total flux subtracted in 200 components = 0.00384951 Jy
! Clean residual min=-0.000747 max=0.000677 Jy/beam
! Clean residual mean=0.000000 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.131267 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 62 components and 0.131267 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.911 mas, bpa=9.744 degrees
! Estimated noise=0.489252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001018 Jy
! Component: 100  -  total flux cleaned = 0.00174791 Jy
! Component: 150  -  total flux cleaned = 0.00232522 Jy
! Component: 200  -  total flux cleaned = 0.00278604 Jy
! Total flux subtracted in 200 components = 0.00278604 Jy
! Clean residual min=-0.000768 max=0.000617 Jy/beam
! Clean residual mean=0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.134053 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311484 Jy
! Component: 100  -  total flux cleaned = 0.000498857 Jy
! Component: 150  -  total flux cleaned = 0.000692869 Jy
! Component: 200  -  total flux cleaned = 0.000810268 Jy
! Total flux subtracted in 200 components = 0.000810268 Jy
! Clean residual min=-0.000725 max=0.000590 Jy/beam
! Clean residual mean=0.000000 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.134863 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 134 components and 0.134863 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=1.88 mas, bpa=-1.381 degrees
! Estimated noise=0.384544 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121855 Jy
! Component: 100  -  total flux cleaned = -0.000136551 Jy
! Component: 150  -  total flux cleaned = -0.000136452 Jy
! Component: 200  -  total flux cleaned = -0.000136608 Jy
! Total flux subtracted in 200 components = -0.000136608 Jy
! Clean residual min=-0.000619 max=0.000631 Jy/beam
! Clean residual mean=0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.134727 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 162 components and 0.134727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050323Jy  sigma=0.449346
! Fit after  self-cal, rms=0.050317Jy  sigma=0.449329
wmodel J0429+1815_X_map.mod
! Writing 162 model components to file: J0429+1815_X_map.mod
wobs   J0429+1815_X_uvs.fits
! Writing UV FITS file: J0429+1815_X_uvs.fits
wwins  J0429+1815_X_map.win
! wwins: Wrote 7 windows to J0429+1815_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117896 Jy
! Component: 100  -  total flux cleaned = 3.48708e-05 Jy
! Component: 150  -  total flux cleaned = -4.48897e-05 Jy
! Component: 200  -  total flux cleaned = -0.000141415 Jy
! Component: 250  -  total flux cleaned = -0.000254357 Jy
! Component: 300  -  total flux cleaned = -0.000374005 Jy
! Component: 350  -  total flux cleaned = -0.000446199 Jy
! Component: 400  -  total flux cleaned = -0.000535237 Jy
! Component: 450  -  total flux cleaned = -0.000614028 Jy
! Component: 500  -  total flux cleaned = -0.000683144 Jy
! Component: 550  -  total flux cleaned = -0.000742818 Jy
! Component: 600  -  total flux cleaned = -0.00080168 Jy
! Component: 650  -  total flux cleaned = -0.0008348 Jy
! Component: 700  -  total flux cleaned = -0.0008922 Jy
! Component: 750  -  total flux cleaned = -0.000932557 Jy
! Component: 800  -  total flux cleaned = -0.000948437 Jy
! Component: 850  -  total flux cleaned = -0.000987857 Jy
! Component: 900  -  total flux cleaned = -0.000964382 Jy
! Component: 950  -  total flux cleaned = -0.000972315 Jy
! Component: 1000  -  total flux cleaned = -0.000987698 Jy
! Component: 1050  -  total flux cleaned = -0.00101053 Jy
! Component: 1100  -  total flux cleaned = -0.00101797 Jy
! Component: 1150  -  total flux cleaned = -0.00102545 Jy
! Component: 1200  -  total flux cleaned = -0.00102544 Jy
! Component: 1250  -  total flux cleaned = -0.00102543 Jy
! Component: 1300  -  total flux cleaned = -0.00102538 Jy
! Component: 1350  -  total flux cleaned = -0.00101102 Jy
! Component: 1400  -  total flux cleaned = -0.00102538 Jy
! Component: 1450  -  total flux cleaned = -0.0010254 Jy
! Component: 1500  -  total flux cleaned = -0.00106057 Jy
! Component: 1550  -  total flux cleaned = -0.00106752 Jy
! Component: 1600  -  total flux cleaned = -0.00106755 Jy
! Component: 1650  -  total flux cleaned = -0.00108808 Jy
! Component: 1700  -  total flux cleaned = -0.00106081 Jy
! Component: 1750  -  total flux cleaned = -0.00105405 Jy
! Component: 1800  -  total flux cleaned = -0.00103399 Jy
! Component: 1850  -  total flux cleaned = -0.00108065 Jy
! Component: 1900  -  total flux cleaned = -0.00104748 Jy
! Component: 1950  -  total flux cleaned = -0.00104746 Jy
! Component: 2000  -  total flux cleaned = -0.00102785 Jy
! Component: 2050  -  total flux cleaned = -0.00105377 Jy
! Component: 2100  -  total flux cleaned = -0.00103443 Jy
! Component: 2150  -  total flux cleaned = -0.00105353 Jy
! Component: 2200  -  total flux cleaned = -0.00104088 Jy
! Component: 2250  -  total flux cleaned = -0.00105352 Jy
! Component: 2300  -  total flux cleaned = -0.00105978 Jy
! Component: 2350  -  total flux cleaned = -0.00105357 Jy
! Component: 2400  -  total flux cleaned = -0.00104734 Jy
! Component: 2450  -  total flux cleaned = -0.00105345 Jy
! Component: 2500  -  total flux cleaned = -0.0010473 Jy
! Component: 2550  -  total flux cleaned = -0.00102305 Jy
! Component: 2600  -  total flux cleaned = -0.00102906 Jy
! Component: 2650  -  total flux cleaned = -0.00101697 Jy
! Component: 2700  -  total flux cleaned = -0.000999106 Jy
! Component: 2750  -  total flux cleaned = -0.000999127 Jy
! Component: 2800  -  total flux cleaned = -0.000987347 Jy
! Component: 2850  -  total flux cleaned = -0.000952197 Jy
! Component: 2900  -  total flux cleaned = -0.000940633 Jy
! Component: 2950  -  total flux cleaned = -0.000923323 Jy
! Component: 3000  -  total flux cleaned = -0.000963539 Jy
! Component: 3050  -  total flux cleaned = -0.000906356 Jy
! Component: 3100  -  total flux cleaned = -0.000934827 Jy
! Component: 3150  -  total flux cleaned = -0.000912205 Jy
! Component: 3200  -  total flux cleaned = -0.000923466 Jy
! Component: 3250  -  total flux cleaned = -0.000917809 Jy
! Component: 3300  -  total flux cleaned = -0.000940097 Jy
! Component: 3350  -  total flux cleaned = -0.000923476 Jy
! Component: 3400  -  total flux cleaned = -0.000912492 Jy
! Component: 3450  -  total flux cleaned = -0.000912459 Jy
! Component: 3500  -  total flux cleaned = -0.000907013 Jy
! Component: 3550  -  total flux cleaned = -0.000885299 Jy
! Component: 3600  -  total flux cleaned = -0.000912334 Jy
! Component: 3650  -  total flux cleaned = -0.000917728 Jy
! Component: 3700  -  total flux cleaned = -0.000923079 Jy
! Component: 3750  -  total flux cleaned = -0.000928383 Jy
! Component: 3800  -  total flux cleaned = -0.000917771 Jy
! Component: 3850  -  total flux cleaned = -0.000928345 Jy
! Component: 3900  -  total flux cleaned = -0.000896866 Jy
! Component: 3950  -  total flux cleaned = -0.000928182 Jy
! Component: 4000  -  total flux cleaned = -0.000938539 Jy
! Component: 4050  -  total flux cleaned = -0.000922962 Jy
! Total flux subtracted in 4096 components = -0.000943614 Jy
! Clean residual min=-0.000381 max=0.000345 Jy/beam
! Clean residual mean=0.000000 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.133783 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 482 components and 0.133783 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0429+1815_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8768 x 1.88 at -1.381 degrees (North through East)
! Clean map  min=-0.00044332  max=0.10618 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0429+1815_X_map.fits
wmodel /image_prod/ug002_uva//J0429+1815_X_map.mod
! Writing 482 model components to file: /image_prod/ug002_uva//J0429+1815_X_map.mod
wobs   /image_prod/ug002_uva//J0429+1815_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0429+1815_X_uvs.fits
wwins  /image_prod/ug002_uva//J0429+1815_X_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0429+1815_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10618 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.94979e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.252866 0.252866 0.505732 1.01146 2.02293 4.04586 8.09171 16.1834 32.3668 64.7337
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1186.4 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0429+1815_X_dfm.log closed on Wed Mar  4 20:22:01 2020