! Started logfile: /image_prod/ug002_uva//J0418+3801_X_dfm.log on Wed Mar 4 20:17:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0418+3801_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0418+3801_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.95679 visibilities/baseline/integration-bin. ! Found source: J0418+3801 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 37200 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0418+3801_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.605145Jy sigma=8.019644 ! Fit after self-cal, rms=1.553368Jy sigma=3.927158 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5863 mas, bmaj=1.244 mas, bpa=-7.299 degrees ! Estimated noise=2.11932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27753 Jy ! Component: 100 - total flux cleaned = 1.74562 Jy ! Total flux subtracted in 100 components = 1.74562 Jy ! Clean residual min=-0.129209 max=0.372142 Jy/beam ! Clean residual mean=0.000137 rms=0.027257 Jy/beam ! Combined flux in latest and established models = 1.74562 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.74562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.078280Jy sigma=2.614353 ! Fit after self-cal, rms=1.075116Jy sigma=2.609019 ! Inverting map ! Added new window around map position (-1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.359282 Jy ! Component: 100 - total flux cleaned = 0.600402 Jy ! Total flux subtracted in 100 components = 0.600402 Jy ! Clean residual min=-0.107212 max=0.199550 Jy/beam ! Clean residual mean=0.000079 rms=0.019248 Jy/beam ! Combined flux in latest and established models = 2.34602 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 8 components and 2.34602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.776996Jy sigma=1.805632 ! Fit after self-cal, rms=0.766472Jy sigma=1.744578 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201701 Jy ! Component: 100 - total flux cleaned = 0.339899 Jy ! Total flux subtracted in 100 components = 0.339899 Jy ! Clean residual min=-0.088829 max=0.124952 Jy/beam ! Clean residual mean=0.000047 rms=0.014995 Jy/beam ! Combined flux in latest and established models = 2.68592 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 2.68592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.637223Jy sigma=1.421773 ! Fit after self-cal, rms=0.633569Jy sigma=1.396756 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118733 Jy ! Component: 100 - total flux cleaned = 0.176613 Jy ! Total flux subtracted in 100 components = 0.176613 Jy ! Clean residual min=-0.075073 max=0.082776 Jy/beam ! Clean residual mean=0.000031 rms=0.013290 Jy/beam ! Combined flux in latest and established models = 2.86253 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 2.86253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.581832Jy sigma=1.283482 ! Fit after self-cal, rms=0.580306Jy sigma=1.274380 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7484 mas, bmaj=1.477 mas, bpa=-6.826 degrees ! Estimated noise=1.05872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.078272 Jy ! Component: 100 - total flux cleaned = 0.0931455 Jy ! Component: 150 - total flux cleaned = 0.0972838 Jy ! Component: 200 - total flux cleaned = 0.0990194 Jy ! Total flux subtracted in 200 components = 0.0990194 Jy ! Clean residual min=-0.077132 max=0.070691 Jy/beam ! Clean residual mean=0.000024 rms=0.015705 Jy/beam ! Combined flux in latest and established models = 2.96155 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 2.96155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.544604Jy sigma=1.207052 ! Fit after self-cal, rms=0.544059Jy sigma=1.204022 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7484 x 1.477 at -6.826 degrees (North through East) ! Clean map min=-0.071975 max=1.9 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.95 HN 0.89 KP 1.09 ! LA 0.96 MK 1.01 NL 1.15 OV 1.04 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 0.90 KP 1.07 ! LA 0.99 MK 1.02 NL 1.12 OV 1.04 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 HN 0.91 KP 1.06 ! LA 0.97 MK 1.04 NL 1.15 OV 1.05 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 0.91 KP 1.08 ! LA 0.98 MK 1.06 NL 1.14 OV 1.03 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.98 HN 0.92 KP 1.07 ! LA 0.97 MK 1.04 NL 1.16 OV 1.03 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.99 HN 0.91 KP 1.09 ! LA 0.97 MK 1.01 NL 1.15 OV 1.03 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 0.92 KP 1.09 ! LA 0.98 MK 1.02 NL 1.13 OV 1.01 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 HN 0.91 KP 1.08 ! LA 0.98 MK 1.02 NL 1.16 OV 1.00 ! SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.91 KP 1.09 ! LA 0.97 MK 1.02 NL 1.12 OV 1.02 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.91 KP 1.07 ! LA 0.98 MK 1.04 NL 1.15 OV 1.02 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.91 KP 1.07 ! LA 0.96 MK 1.01 NL 1.17 OV 1.03 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 0.92 KP 1.09 ! LA 0.99 MK 1.05 NL 1.13 OV 1.04 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.544059Jy sigma=1.204022 ! Fit after self-cal, rms=0.422896Jy sigma=0.986603 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7497 mas, bmaj=1.467 mas, bpa=-6.762 degrees ! Estimated noise=1.05707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489338 Jy ! Component: 100 - total flux cleaned = 0.0621137 Jy ! Component: 150 - total flux cleaned = 0.0678139 Jy ! Component: 200 - total flux cleaned = 0.0678741 Jy ! Total flux subtracted in 200 components = 0.0678741 Jy ! Clean residual min=-0.059145 max=0.056880 Jy/beam ! Clean residual mean=0.000011 rms=0.012548 Jy/beam ! Combined flux in latest and established models = 3.02943 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 3.02943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.407694Jy sigma=0.967007 ! Fit after self-cal, rms=0.406740Jy sigma=0.961929 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.406740Jy sigma=0.961929 ! Fit after self-cal, rms=0.130095Jy sigma=0.423514 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7527 mas, bmaj=1.444 mas, bpa=-7.475 degrees ! Estimated noise=1.06168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200467 Jy ! Component: 100 - total flux cleaned = 0.027344 Jy ! Component: 150 - total flux cleaned = 0.033662 Jy ! Component: 200 - total flux cleaned = 0.0378975 Jy ! Total flux subtracted in 200 components = 0.0378975 Jy ! Clean residual min=-0.016140 max=0.031763 Jy/beam ! Clean residual mean=0.000002 rms=0.004109 Jy/beam ! Combined flux in latest and established models = 3.06732 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 3.06732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124165Jy sigma=0.398262 ! Fit after self-cal, rms=0.123005Jy sigma=0.396288 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240557 Jy ! Component: 100 - total flux cleaned = 0.0352272 Jy ! Component: 150 - total flux cleaned = 0.0412357 Jy ! Component: 200 - total flux cleaned = 0.0451745 Jy ! Total flux subtracted in 200 components = 0.0451745 Jy ! Clean residual min=-0.016819 max=0.028364 Jy/beam ! Clean residual mean=-0.000002 rms=0.003735 Jy/beam ! Combined flux in latest and established models = 3.1125 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 3.1125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117402Jy sigma=0.375503 ! Fit after self-cal, rms=0.117008Jy sigma=0.374502 ! Inverting map ! Added new window around map position (5.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245414 Jy ! Component: 100 - total flux cleaned = 0.0377173 Jy ! Component: 150 - total flux cleaned = 0.0479529 Jy ! Component: 200 - total flux cleaned = 0.0562943 Jy ! Total flux subtracted in 200 components = 0.0562943 Jy ! Clean residual min=-0.017826 max=0.025179 Jy/beam ! Clean residual mean=-0.000003 rms=0.003300 Jy/beam ! Combined flux in latest and established models = 3.16879 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 3.16879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108772Jy sigma=0.355039 ! Fit after self-cal, rms=0.108211Jy sigma=0.354050 ! Inverting map ! Added new window around map position (4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225407 Jy ! Component: 100 - total flux cleaned = 0.03441 Jy ! Component: 150 - total flux cleaned = 0.0406991 Jy ! Component: 200 - total flux cleaned = 0.0467517 Jy ! Total flux subtracted in 200 components = 0.0467517 Jy ! Clean residual min=-0.016899 max=0.014791 Jy/beam ! Clean residual mean=-0.000003 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 3.21555 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 3.21554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100735Jy sigma=0.338242 ! Fit after self-cal, rms=0.100132Jy sigma=0.336962 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100132Jy sigma=0.336962 ! Fit after self-cal, rms=0.091207Jy sigma=0.320761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7521 mas, bmaj=1.44 mas, bpa=-7.631 degrees ! Estimated noise=1.05902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129255 Jy ! Component: 100 - total flux cleaned = 0.0234452 Jy ! Component: 150 - total flux cleaned = 0.0324751 Jy ! Component: 200 - total flux cleaned = 0.0400867 Jy ! Total flux subtracted in 200 components = 0.0400867 Jy ! Clean residual min=-0.011857 max=0.011976 Jy/beam ! Clean residual mean=-0.000000 rms=0.002231 Jy/beam ! Combined flux in latest and established models = 3.25563 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 3.25563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087110Jy sigma=0.310601 ! Fit after self-cal, rms=0.086989Jy sigma=0.310415 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819745 Jy ! Component: 100 - total flux cleaned = 0.0134857 Jy ! Component: 150 - total flux cleaned = 0.0181397 Jy ! Component: 200 - total flux cleaned = 0.0207255 Jy ! Total flux subtracted in 200 components = 0.0207255 Jy ! Clean residual min=-0.010555 max=0.009518 Jy/beam ! Clean residual mean=-0.000001 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 3.27636 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 111 components and 3.27636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084677Jy sigma=0.303326 ! Fit after self-cal, rms=0.084535Jy sigma=0.303007 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084535Jy sigma=0.303007 ! Fit after self-cal, rms=0.082991Jy sigma=0.300790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.661 mas, bmaj=2.234 mas, bpa=-9.727 degrees ! Estimated noise=1.87535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145658 Jy ! Component: 100 - total flux cleaned = 0.0252906 Jy ! Component: 150 - total flux cleaned = 0.0304218 Jy ! Component: 200 - total flux cleaned = 0.032422 Jy ! Total flux subtracted in 200 components = 0.032422 Jy ! Clean residual min=-0.012730 max=0.012568 Jy/beam ! Clean residual mean=-0.000002 rms=0.003475 Jy/beam ! Combined flux in latest and established models = 3.30878 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 3.30878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081159Jy sigma=0.298879 ! Fit after self-cal, rms=0.081100Jy sigma=0.298555 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454944 Jy ! Component: 100 - total flux cleaned = 0.00618856 Jy ! Component: 150 - total flux cleaned = 0.00679618 Jy ! Component: 200 - total flux cleaned = 0.00626405 Jy ! Total flux subtracted in 200 components = 0.00626405 Jy ! Clean residual min=-0.012664 max=0.012544 Jy/beam ! Clean residual mean=-0.000003 rms=0.003350 Jy/beam ! Combined flux in latest and established models = 3.31504 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 3.31504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080713Jy sigma=0.299183 ! Fit after self-cal, rms=0.080744Jy sigma=0.299085 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.752 mas, bmaj=1.438 mas, bpa=-7.69 degrees ! Estimated noise=1.05904 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.752 x 1.438 at -7.69 degrees (North through East) ! Clean map min=-0.0087775 max=1.9082 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080744Jy sigma=0.299085 ! Fit after self-cal, rms=0.077566Jy sigma=0.273765 ! Inverting map and beam ! Estimated beam: bmin=0.7517 mas, bmaj=1.436 mas, bpa=-7.745 degrees ! Estimated noise=1.05937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376007 Jy ! Component: 100 - total flux cleaned = 0.00647408 Jy ! Component: 150 - total flux cleaned = 0.00776875 Jy ! Component: 200 - total flux cleaned = 0.00894386 Jy ! Total flux subtracted in 200 components = 0.00894386 Jy ! Clean residual min=-0.008881 max=0.008292 Jy/beam ! Clean residual mean=-0.000000 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 3.32399 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 3.32399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076343Jy sigma=0.268276 ! Fit after self-cal, rms=0.076240Jy sigma=0.268135 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131187 Jy ! Component: 100 - total flux cleaned = 0.00199014 Jy ! Component: 150 - total flux cleaned = 0.002787 Jy ! Component: 200 - total flux cleaned = 0.00338248 Jy ! Total flux subtracted in 200 components = 0.00338248 Jy ! Clean residual min=-0.008558 max=0.008026 Jy/beam ! Clean residual mean=-0.000000 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 3.32737 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 159 components and 3.32737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075636Jy sigma=0.265531 ! Fit after self-cal, rms=0.075589Jy sigma=0.265477 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075589Jy sigma=0.265477 ! Fit after self-cal, rms=0.074777Jy sigma=0.264683 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5907 mas, bmaj=1.21 mas, bpa=-8.325 degrees ! Estimated noise=2.11682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26329 Jy ! Component: 100 - total flux cleaned = 1.78864 Jy ! Component: 150 - total flux cleaned = 2.15132 Jy ! Component: 200 - total flux cleaned = 2.40761 Jy ! Total flux subtracted in 200 components = 2.40761 Jy ! Clean residual min=-0.054850 max=0.142288 Jy/beam ! Clean residual mean=0.000074 rms=0.012523 Jy/beam ! Combined flux in latest and established models = 2.40761 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.40761 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7517 mas, bmaj=1.435 mas, bpa=-7.767 degrees ! Estimated noise=1.05954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.265825 Jy ! Component: 100 - total flux cleaned = 0.425322 Jy ! Component: 150 - total flux cleaned = 0.526703 Jy ! Component: 200 - total flux cleaned = 0.595389 Jy ! Total flux subtracted in 200 components = 0.595389 Jy ! Clean residual min=-0.021555 max=0.037855 Jy/beam ! Clean residual mean=0.000022 rms=0.005168 Jy/beam ! Combined flux in latest and established models = 3.003 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 3.003 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0482083 Jy ! Component: 100 - total flux cleaned = 0.0860958 Jy ! Component: 150 - total flux cleaned = 0.11709 Jy ! Component: 200 - total flux cleaned = 0.14338 Jy ! Total flux subtracted in 200 components = 0.14338 Jy ! Clean residual min=-0.016746 max=0.016542 Jy/beam ! Clean residual mean=0.000010 rms=0.003267 Jy/beam ! Combined flux in latest and established models = 3.14638 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 39 components and 3.14638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.659 mas, bmaj=2.231 mas, bpa=-9.906 degrees ! Estimated noise=1.88048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500662 Jy ! Component: 100 - total flux cleaned = 0.0850325 Jy ! Component: 150 - total flux cleaned = 0.111185 Jy ! Component: 200 - total flux cleaned = 0.131504 Jy ! Total flux subtracted in 200 components = 0.131504 Jy ! Clean residual min=-0.014151 max=0.015328 Jy/beam ! Clean residual mean=0.000008 rms=0.003798 Jy/beam ! Combined flux in latest and established models = 3.27788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129795 Jy ! Component: 100 - total flux cleaned = 0.0219419 Jy ! Component: 150 - total flux cleaned = 0.029353 Jy ! Component: 200 - total flux cleaned = 0.0359078 Jy ! Total flux subtracted in 200 components = 0.0359078 Jy ! Clean residual min=-0.011951 max=0.011931 Jy/beam ! Clean residual mean=0.000001 rms=0.002991 Jy/beam ! Combined flux in latest and established models = 3.31379 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 82 components and 3.31379 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7517 mas, bmaj=1.435 mas, bpa=-7.767 degrees ! Estimated noise=1.05954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077297 Jy ! Component: 100 - total flux cleaned = 0.00489537 Jy ! Component: 150 - total flux cleaned = 0.00826079 Jy ! Component: 200 - total flux cleaned = 0.01043 Jy ! Total flux subtracted in 200 components = 0.01043 Jy ! Clean residual min=-0.011832 max=0.010740 Jy/beam ! Clean residual mean=0.000001 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 3.32422 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 3.32422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079556Jy sigma=0.285955 ! Fit after self-cal, rms=0.078782Jy sigma=0.282461 wmodel J0418+3801_X_map.mod ! Writing 108 model components to file: J0418+3801_X_map.mod wobs J0418+3801_X_uvs.fits ! Writing UV FITS file: J0418+3801_X_uvs.fits wwins J0418+3801_X_map.win ! wwins: Wrote 6 windows to J0418+3801_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00279515 Jy ! Component: 100 - total flux cleaned = -0.00504235 Jy ! Component: 150 - total flux cleaned = -0.00521484 Jy ! Component: 200 - total flux cleaned = -0.00567322 Jy ! Component: 250 - total flux cleaned = -0.00596508 Jy ! Component: 300 - total flux cleaned = -0.00596868 Jy ! Component: 350 - total flux cleaned = -0.00624218 Jy ! Component: 400 - total flux cleaned = -0.0062431 Jy ! Component: 450 - total flux cleaned = -0.00624289 Jy ! Component: 500 - total flux cleaned = -0.00611763 Jy ! Component: 550 - total flux cleaned = -0.00575968 Jy ! Component: 600 - total flux cleaned = -0.00587656 Jy ! Component: 650 - total flux cleaned = -0.00541803 Jy ! Component: 700 - total flux cleaned = -0.00530548 Jy ! Component: 750 - total flux cleaned = -0.00552094 Jy ! Component: 800 - total flux cleaned = -0.00540671 Jy ! Component: 850 - total flux cleaned = -0.00508987 Jy ! Component: 900 - total flux cleaned = -0.00550753 Jy ! Component: 950 - total flux cleaned = -0.00540473 Jy ! Component: 1000 - total flux cleaned = -0.00520559 Jy ! Component: 1050 - total flux cleaned = -0.00530628 Jy ! Component: 1100 - total flux cleaned = -0.00530853 Jy ! Component: 1150 - total flux cleaned = -0.00540322 Jy ! Component: 1200 - total flux cleaned = -0.00549446 Jy ! Component: 1250 - total flux cleaned = -0.00512179 Jy ! Component: 1300 - total flux cleaned = -0.0048491 Jy ! Component: 1350 - total flux cleaned = -0.00467219 Jy ! Component: 1400 - total flux cleaned = -0.0044965 Jy ! Component: 1450 - total flux cleaned = -0.00432385 Jy ! Component: 1500 - total flux cleaned = -0.00449562 Jy ! Component: 1550 - total flux cleaned = -0.00466469 Jy ! Component: 1600 - total flux cleaned = -0.00441578 Jy ! Component: 1650 - total flux cleaned = -0.00457982 Jy ! Component: 1700 - total flux cleaned = -0.00449698 Jy ! Component: 1750 - total flux cleaned = -0.0047345 Jy ! Component: 1800 - total flux cleaned = -0.0044199 Jy ! Component: 1850 - total flux cleaned = -0.00426356 Jy ! Component: 1900 - total flux cleaned = -0.00441759 Jy ! Component: 1950 - total flux cleaned = -0.00434198 Jy ! Component: 2000 - total flux cleaned = -0.00426915 Jy ! Component: 2050 - total flux cleaned = -0.0044156 Jy ! Component: 2100 - total flux cleaned = -0.00434413 Jy ! Component: 2150 - total flux cleaned = -0.00441496 Jy ! Component: 2200 - total flux cleaned = -0.00469889 Jy ! Component: 2250 - total flux cleaned = -0.00483725 Jy ! Component: 2300 - total flux cleaned = -0.00476915 Jy ! Component: 2350 - total flux cleaned = -0.00517762 Jy ! Component: 2400 - total flux cleaned = -0.00531101 Jy ! Component: 2450 - total flux cleaned = -0.00491298 Jy ! Component: 2500 - total flux cleaned = -0.00517569 Jy ! Component: 2550 - total flux cleaned = -0.00543305 Jy ! Component: 2600 - total flux cleaned = -0.00511211 Jy ! Component: 2650 - total flux cleaned = -0.00511165 Jy ! Component: 2700 - total flux cleaned = -0.00542368 Jy ! Component: 2750 - total flux cleaned = -0.00542262 Jy ! Component: 2800 - total flux cleaned = -0.00548319 Jy ! Component: 2850 - total flux cleaned = -0.00524244 Jy ! Component: 2900 - total flux cleaned = -0.00542157 Jy ! Component: 2950 - total flux cleaned = -0.00565738 Jy ! Component: 3000 - total flux cleaned = -0.00548174 Jy ! Component: 3050 - total flux cleaned = -0.00548236 Jy ! Component: 3100 - total flux cleaned = -0.00588138 Jy ! Component: 3150 - total flux cleaned = -0.00599481 Jy ! Component: 3200 - total flux cleaned = -0.00616109 Jy ! Component: 3250 - total flux cleaned = -0.00627189 Jy ! Component: 3300 - total flux cleaned = -0.00654486 Jy ! Component: 3350 - total flux cleaned = -0.00659804 Jy ! Component: 3400 - total flux cleaned = -0.00697219 Jy ! Component: 3450 - total flux cleaned = -0.00692079 Jy ! Component: 3500 - total flux cleaned = -0.00739026 Jy ! Component: 3550 - total flux cleaned = -0.00759644 Jy ! Component: 3600 - total flux cleaned = -0.00769859 Jy ! Component: 3650 - total flux cleaned = -0.00769739 Jy ! Component: 3700 - total flux cleaned = -0.0077966 Jy ! Component: 3750 - total flux cleaned = -0.00789536 Jy ! Component: 3800 - total flux cleaned = -0.00779764 Jy ! Component: 3850 - total flux cleaned = -0.0080403 Jy ! Component: 3900 - total flux cleaned = -0.00804091 Jy ! Component: 3950 - total flux cleaned = -0.0081361 Jy ! Component: 4000 - total flux cleaned = -0.00837203 Jy ! Component: 4050 - total flux cleaned = -0.00841856 Jy ! Total flux subtracted in 4096 components = -0.00832664 Jy ! Clean residual min=-0.002328 max=0.002299 Jy/beam ! Clean residual mean=0.000000 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 3.31589 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 407 components and 3.3159 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0418+3801_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7517 x 1.435 at -7.767 degrees (North through East) ! Clean map min=-0.00879 max=1.9137 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0418+3801_X_map.fits wmodel /image_prod/ug002_uva//J0418+3801_X_map.mod ! Writing 407 model components to file: /image_prod/ug002_uva//J0418+3801_X_map.mod wobs /image_prod/ug002_uva//J0418+3801_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0418+3801_X_uvs.fits wwins /image_prod/ug002_uva//J0418+3801_X_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0418+3801_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.91369 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000739443 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.115919 0.115919 0.231837 0.463675 0.927349 1.8547 3.7094 7.4188 14.8376 29.6752 59.3504 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.913 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2588.02 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0418+3801_X_dfm.log closed on Wed Mar 4 20:17:43 2020