! Started logfile: /image_prod/ug002_uva//J0411+0843_S_dfm.log on Wed Mar  4 20:14:12 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0411+0843_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0411+0843_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.807407 visibilities/baseline/integration-bin.
! Found source: J0411+0843
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4905 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0411+0843_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999284Jy  sigma=8.330284
! Fit after  self-cal, rms=0.939483Jy  sigma=7.845319
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=7.413 mas, bpa=0.8292 degrees
! Estimated noise=1.51875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0472039 Jy
! Component: 100  -  total flux cleaned = 0.0579395 Jy
! Total flux subtracted in 100 components = 0.0579395 Jy
! Clean residual min=-0.003543 max=0.004906 Jy/beam
! Clean residual mean=0.000003 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.0579395 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0579395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060570Jy  sigma=0.473295
! Fit after  self-cal, rms=0.060042Jy  sigma=0.469480
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.53 mas, bmaj=8.439 mas, bpa=0.3654 degrees
! Estimated noise=1.23524 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00509852 Jy
! Component: 100  -  total flux cleaned = 0.00670355 Jy
! Component: 150  -  total flux cleaned = 0.0069312 Jy
! Component: 200  -  total flux cleaned = 0.00688831 Jy
! Total flux subtracted in 200 components = 0.00688831 Jy
! Clean residual min=-0.003297 max=0.003623 Jy/beam
! Clean residual mean=0.000006 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.0648278 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.0648278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059572Jy  sigma=0.466543
! Fit after  self-cal, rms=0.059564Jy  sigma=0.466465
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.53 x 8.439 at 0.3654 degrees (North through East)
! Clean map  min=-0.0031758  max=0.061982 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.11     HN        1.10     KP        0.93     
!   LA        1.01     MK        0.97     NL        0.91     OV        0.91     
!   PT        1.09     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.13     HN        1.00     KP        1.04     
!   LA        1.03     MK        1.01     NL        0.93     OV        0.89     
!   PT        1.13     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.01     KP        1.08     
!   LA        1.00     MK        0.98     NL        0.85     OV        0.87     
!   PT        1.12     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059564Jy  sigma=0.466465
! Fit after  self-cal, rms=0.057655Jy  sigma=0.462565
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=8.343 mas, bpa=0.6334 degrees
! Estimated noise=1.22313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457886 Jy
! Component: 100  -  total flux cleaned = 0.000345217 Jy
! Component: 150  -  total flux cleaned = 0.00032165 Jy
! Component: 200  -  total flux cleaned = 0.000343153 Jy
! Total flux subtracted in 200 components = 0.000343153 Jy
! Clean residual min=-0.002953 max=0.002840 Jy/beam
! Clean residual mean=0.000007 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.0651709 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.0651709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057628Jy  sigma=0.462356
! Fit after  self-cal, rms=0.057626Jy  sigma=0.462123
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057626Jy  sigma=0.462123
! Fit after  self-cal, rms=0.058415Jy  sigma=0.459142
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.505 mas, bmaj=8.293 mas, bpa=0.7572 degrees
! Estimated noise=1.22383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488182 Jy
! Component: 100  -  total flux cleaned = 0.000621567 Jy
! Component: 150  -  total flux cleaned = 0.000687775 Jy
! Component: 200  -  total flux cleaned = 0.000731771 Jy
! Total flux subtracted in 200 components = 0.000731771 Jy
! Clean residual min=-0.002823 max=0.002756 Jy/beam
! Clean residual mean=0.000002 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.0659027 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.0659027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058403Jy  sigma=0.459056
! Fit after  self-cal, rms=0.058471Jy  sigma=0.458859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.82947e-05 Jy
! Component: 100  -  total flux cleaned = 6.25379e-05 Jy
! Component: 150  -  total flux cleaned = 6.29191e-05 Jy
! Component: 200  -  total flux cleaned = 7.54556e-05 Jy
! Total flux subtracted in 200 components = 7.54556e-05 Jy
! Clean residual min=-0.002809 max=0.002728 Jy/beam
! Clean residual mean=0.000002 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.0659782 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.0659782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058466Jy  sigma=0.458813
! Fit after  self-cal, rms=0.058467Jy  sigma=0.458810
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058467Jy  sigma=0.458810
! Fit after  self-cal, rms=0.059726Jy  sigma=0.453113
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=8.279 mas, bpa=0.8366 degrees
! Estimated noise=1.22443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025074 Jy
! Component: 100  -  total flux cleaned = 0.000332829 Jy
! Component: 150  -  total flux cleaned = 0.000391947 Jy
! Component: 200  -  total flux cleaned = 0.000403107 Jy
! Total flux subtracted in 200 components = 0.000403107 Jy
! Clean residual min=-0.002121 max=0.002006 Jy/beam
! Clean residual mean=-0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0663813 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.0663813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059720Jy  sigma=0.453072
! Fit after  self-cal, rms=0.059802Jy  sigma=0.452841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.21075e-05 Jy
! Component: 100  -  total flux cleaned = 1.76913e-07 Jy
! Component: 150  -  total flux cleaned = 1.05574e-05 Jy
! Component: 200  -  total flux cleaned = 3.03239e-05 Jy
! Total flux subtracted in 200 components = 3.03239e-05 Jy
! Clean residual min=-0.002088 max=0.001951 Jy/beam
! Clean residual mean=-0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0664116 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.0664116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059798Jy  sigma=0.452812
! Fit after  self-cal, rms=0.059800Jy  sigma=0.452810
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059800Jy  sigma=0.452810
! Fit after  self-cal, rms=0.059994Jy  sigma=0.452795
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.43 mas, bmaj=11.94 mas, bpa=-6.371 degrees
! Estimated noise=1.48576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000432393 Jy
! Component: 100  -  total flux cleaned = 0.000515613 Jy
! Component: 150  -  total flux cleaned = 0.000547763 Jy
! Component: 200  -  total flux cleaned = 0.0005603 Jy
! Total flux subtracted in 200 components = 0.0005603 Jy
! Clean residual min=-0.002090 max=0.002113 Jy/beam
! Clean residual mean=-0.000003 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.0669719 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 0.0669719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060003Jy  sigma=0.452825
! Fit after  self-cal, rms=0.060001Jy  sigma=0.452774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.57908e-05 Jy
! Component: 100  -  total flux cleaned = 5.00101e-06 Jy
! Component: 150  -  total flux cleaned = 6.47845e-06 Jy
! Component: 200  -  total flux cleaned = 6.17827e-06 Jy
! Total flux subtracted in 200 components = 6.17827e-06 Jy
! Clean residual min=-0.002117 max=0.002095 Jy/beam
! Clean residual mean=-0.000003 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.0669781 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 0.0669781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060012Jy  sigma=0.452821
! Fit after  self-cal, rms=0.060005Jy  sigma=0.452788
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.488 mas, bmaj=8.269 mas, bpa=0.8293 degrees
! Estimated noise=1.22503 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.488 x 8.269 at 0.8293 degrees (North through East)
! Clean map  min=-0.0020406  max=0.060915 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.927 mas, bmaj=7.293 mas, bpa=1.315 degrees
! Estimated noise=1.49818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0467695 Jy
! Component: 100  -  total flux cleaned = 0.0579478 Jy
! Component: 150  -  total flux cleaned = 0.0627742 Jy
! Component: 200  -  total flux cleaned = 0.0647105 Jy
! Total flux subtracted in 200 components = 0.0647105 Jy
! Clean residual min=-0.002557 max=0.002849 Jy/beam
! Clean residual mean=-0.000002 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.0647105 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0647105 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.488 mas, bmaj=8.269 mas, bpa=0.8293 degrees
! Estimated noise=1.22503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238838 Jy
! Component: 100  -  total flux cleaned = 0.00304645 Jy
! Component: 150  -  total flux cleaned = 0.00332678 Jy
! Component: 200  -  total flux cleaned = 0.00335938 Jy
! Total flux subtracted in 200 components = 0.00335938 Jy
! Clean residual min=-0.002043 max=0.001840 Jy/beam
! Clean residual mean=-0.000002 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.0680699 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 31 components and 0.0680699 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.43 mas, bmaj=11.94 mas, bpa=-6.371 degrees
! Estimated noise=1.48576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000417296 Jy
! Component: 100  -  total flux cleaned = -0.000563408 Jy
! Component: 150  -  total flux cleaned = -0.000584065 Jy
! Component: 200  -  total flux cleaned = -0.00058419 Jy
! Total flux subtracted in 200 components = -0.00058419 Jy
! Clean residual min=-0.002215 max=0.001893 Jy/beam
! Clean residual mean=-0.000003 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.0674857 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.51911e-05 Jy
! Component: 100  -  total flux cleaned = 2.81332e-05 Jy
! Component: 150  -  total flux cleaned = 2.77827e-05 Jy
! Component: 200  -  total flux cleaned = 3.836e-05 Jy
! Total flux subtracted in 200 components = 3.836e-05 Jy
! Clean residual min=-0.002189 max=0.001917 Jy/beam
! Clean residual mean=-0.000003 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.067524 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 52 components and 0.067524 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.488 mas, bmaj=8.269 mas, bpa=0.8293 degrees
! Estimated noise=1.22503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253821 Jy
! Component: 100  -  total flux cleaned = 0.000173577 Jy
! Component: 150  -  total flux cleaned = 0.000123111 Jy
! Component: 200  -  total flux cleaned = 0.000121948 Jy
! Total flux subtracted in 200 components = 0.000121948 Jy
! Clean residual min=-0.002033 max=0.001842 Jy/beam
! Clean residual mean=-0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.067646 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.067646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059949Jy  sigma=0.452309
! Fit after  self-cal, rms=0.059953Jy  sigma=0.452243
wmodel J0411+0843_S_map.mod
! Writing 69 model components to file: J0411+0843_S_map.mod
wobs   J0411+0843_S_uvs.fits
! Writing UV FITS file: J0411+0843_S_uvs.fits
wwins  J0411+0843_S_map.win
! wwins: Wrote 2 windows to J0411+0843_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332655 Jy
! Component: 100  -  total flux cleaned = -0.000552316 Jy
! Component: 150  -  total flux cleaned = -0.000552547 Jy
! Component: 200  -  total flux cleaned = -0.000357319 Jy
! Component: 250  -  total flux cleaned = -0.000357115 Jy
! Component: 300  -  total flux cleaned = -0.000227848 Jy
! Component: 350  -  total flux cleaned = -0.00015241 Jy
! Component: 400  -  total flux cleaned = -0.000127593 Jy
! Component: 450  -  total flux cleaned = -3.184e-05 Jy
! Component: 500  -  total flux cleaned = -8.47178e-06 Jy
! Component: 550  -  total flux cleaned = 5.9396e-05 Jy
! Component: 600  -  total flux cleaned = 5.89068e-05 Jy
! Component: 650  -  total flux cleaned = 3.67435e-05 Jy
! Component: 700  -  total flux cleaned = 3.65551e-05 Jy
! Component: 750  -  total flux cleaned = 5.77882e-05 Jy
! Component: 800  -  total flux cleaned = -4.6808e-05 Jy
! Component: 850  -  total flux cleaned = -8.78445e-05 Jy
! Component: 900  -  total flux cleaned = -0.000108157 Jy
! Component: 950  -  total flux cleaned = -0.000228533 Jy
! Component: 1000  -  total flux cleaned = -0.000208833 Jy
! Component: 1050  -  total flux cleaned = -0.000267772 Jy
! Component: 1100  -  total flux cleaned = -0.000306457 Jy
! Component: 1150  -  total flux cleaned = -0.000439445 Jy
! Component: 1200  -  total flux cleaned = -0.000401712 Jy
! Component: 1250  -  total flux cleaned = -0.000346263 Jy
! Component: 1300  -  total flux cleaned = -0.000346467 Jy
! Component: 1350  -  total flux cleaned = -0.000274322 Jy
! Component: 1400  -  total flux cleaned = -0.000256499 Jy
! Component: 1450  -  total flux cleaned = -0.000239051 Jy
! Component: 1500  -  total flux cleaned = -0.000151693 Jy
! Component: 1550  -  total flux cleaned = -0.000117351 Jy
! Component: 1600  -  total flux cleaned = -0.000117519 Jy
! Component: 1650  -  total flux cleaned = -8.36626e-05 Jy
! Component: 1700  -  total flux cleaned = -8.36213e-05 Jy
! Component: 1750  -  total flux cleaned = -5.04683e-05 Jy
! Component: 1800  -  total flux cleaned = -1.04709e-06 Jy
! Component: 1850  -  total flux cleaned = 6.45434e-05 Jy
! Component: 1900  -  total flux cleaned = 6.46518e-05 Jy
! Component: 1950  -  total flux cleaned = 9.65933e-05 Jy
! Component: 2000  -  total flux cleaned = 9.65849e-05 Jy
! Component: 2050  -  total flux cleaned = 0.000143926 Jy
! Component: 2100  -  total flux cleaned = 0.000128731 Jy
! Component: 2150  -  total flux cleaned = 9.80731e-05 Jy
! Component: 2200  -  total flux cleaned = 0.000189837 Jy
! Component: 2250  -  total flux cleaned = 0.000129224 Jy
! Component: 2300  -  total flux cleaned = 0.000144022 Jy
! Component: 2350  -  total flux cleaned = 9.95289e-05 Jy
! Component: 2400  -  total flux cleaned = 0.000188112 Jy
! Component: 2450  -  total flux cleaned = 0.000158708 Jy
! Component: 2500  -  total flux cleaned = 8.61786e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000115225 Jy
! Component: 2600  -  total flux cleaned = 0.00010115 Jy
! Component: 2650  -  total flux cleaned = 0.000115355 Jy
! Component: 2700  -  total flux cleaned = 0.000157428 Jy
! Component: 2750  -  total flux cleaned = 8.76848e-05 Jy
! Component: 2800  -  total flux cleaned = 8.76608e-05 Jy
! Component: 2850  -  total flux cleaned = 0.000128924 Jy
! Component: 2900  -  total flux cleaned = 1.96499e-05 Jy
! Component: 2950  -  total flux cleaned = 4.66974e-05 Jy
! Component: 3000  -  total flux cleaned = 6.02857e-05 Jy
! Component: 3050  -  total flux cleaned = -1.98739e-05 Jy
! Component: 3100  -  total flux cleaned = 7.30473e-05 Jy
! Component: 3150  -  total flux cleaned = 5.97212e-05 Jy
! Component: 3200  -  total flux cleaned = -1.86246e-05 Jy
! Component: 3250  -  total flux cleaned = 7.51277e-06 Jy
! Component: 3300  -  total flux cleaned = -5.37956e-06 Jy
! Component: 3350  -  total flux cleaned = 0.000109844 Jy
! Component: 3400  -  total flux cleaned = 4.62099e-05 Jy
! Component: 3450  -  total flux cleaned = 8.41701e-05 Jy
! Component: 3500  -  total flux cleaned = 0.000109218 Jy
! Component: 3550  -  total flux cleaned = 9.67904e-05 Jy
! Component: 3600  -  total flux cleaned = 8.45068e-05 Jy
! Component: 3650  -  total flux cleaned = 7.19926e-05 Jy
! Component: 3700  -  total flux cleaned = 8.42767e-05 Jy
! Component: 3750  -  total flux cleaned = 6.00737e-05 Jy
! Component: 3800  -  total flux cleaned = 0.000108426 Jy
! Component: 3850  -  total flux cleaned = 7.24358e-05 Jy
! Component: 3900  -  total flux cleaned = 7.24532e-05 Jy
! Component: 3950  -  total flux cleaned = 9.61558e-05 Jy
! Component: 4000  -  total flux cleaned = 4.908e-05 Jy
! Component: 4050  -  total flux cleaned = 6.07976e-05 Jy
! Total flux subtracted in 4096 components = 8.41477e-05 Jy
! Clean residual min=-0.000729 max=0.000714 Jy/beam
! Clean residual mean=-0.000001 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0677301 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 373 components and 0.0677301 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0411+0843_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.488 x 8.269 at 0.8293 degrees (North through East)
! Clean map  min=-0.0020439  max=0.061045 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0411+0843_S_map.fits
wmodel /image_prod/ug002_uva//J0411+0843_S_map.mod
! Writing 373 model components to file: /image_prod/ug002_uva//J0411+0843_S_map.mod
wobs   /image_prod/ug002_uva//J0411+0843_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0411+0843_S_uvs.fits
wwins  /image_prod/ug002_uva//J0411+0843_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0411+0843_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0610448 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000218166 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.07216 1.07216 2.14432 4.28864 8.57728 17.1546 34.3091 68.6182
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.061 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  279.809 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0411+0843_S_dfm.log closed on Wed Mar  4 20:14:16 2020