! Started logfile: /image_prod/ug002_uva//J0405-1308_S_a_dfm.log on Wed Mar 4 20:09:44 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0405-1308_S_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0405-1308_S_a_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.899306 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 777 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0405-1308_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.100757Jy sigma=11.578307 ! Fit after self-cal, rms=0.588669Jy sigma=6.137546 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=15.84 mas, bpa=-13.88 degrees ! Estimated noise=3.13019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.330964 Jy ! Component: 100 - total flux cleaned = 0.403784 Jy ! Total flux subtracted in 100 components = 0.403784 Jy ! Clean residual min=-0.025491 max=0.029570 Jy/beam ! Clean residual mean=0.000001 rms=0.008825 Jy/beam ! Combined flux in latest and established models = 0.403784 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.403784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.135591Jy sigma=1.387872 ! Fit after self-cal, rms=0.135565Jy sigma=1.387458 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=15.84 mas, bpa=-12.72 degrees ! Estimated noise=2.55635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264431 Jy ! Component: 100 - total flux cleaned = 0.0394609 Jy ! Component: 150 - total flux cleaned = 0.0449675 Jy ! Component: 200 - total flux cleaned = 0.0474655 Jy ! Total flux subtracted in 200 components = 0.0474655 Jy ! Clean residual min=-0.036314 max=0.034551 Jy/beam ! Clean residual mean=0.000037 rms=0.012139 Jy/beam ! Combined flux in latest and established models = 0.45125 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 50 components and 0.45125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.129937Jy sigma=1.337679 ! Fit after self-cal, rms=0.129937Jy sigma=1.337000 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.654 x 15.84 at -12.72 degrees (North through East) ! Clean map min=-0.035725 max=0.42261 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.99 KP 1.02 ! LA 1.09 MK 0.98 NL 0.89 OV 0.97 ! PT 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.01 KP 1.13 ! LA 0.95 MK 1.02 NL 0.92 OV 1.00 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.00 KP 1.06 ! LA 0.93 MK 1.03 NL 0.99 OV 1.04 ! PT 0.91 ! ! ! Fit before self-cal, rms=0.129937Jy sigma=1.337000 ! Fit after self-cal, rms=0.122753Jy sigma=1.287634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=15.86 mas, bpa=-12.71 degrees ! Estimated noise=2.545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433478 Jy ! Component: 100 - total flux cleaned = 0.00467899 Jy ! Component: 150 - total flux cleaned = 0.00481952 Jy ! Component: 200 - total flux cleaned = 0.00493679 Jy ! Total flux subtracted in 200 components = 0.00493679 Jy ! Clean residual min=-0.029196 max=0.037832 Jy/beam ! Clean residual mean=0.000013 rms=0.011681 Jy/beam ! Combined flux in latest and established models = 0.456186 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.456186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122321Jy sigma=1.283166 ! Fit after self-cal, rms=0.122584Jy sigma=1.282218 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122584Jy sigma=1.282218 ! Fit after self-cal, rms=0.122762Jy sigma=1.281949 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=15.85 mas, bpa=-12.71 degrees ! Estimated noise=2.53988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119524 Jy ! Component: 100 - total flux cleaned = 0.0013153 Jy ! Component: 150 - total flux cleaned = 0.00154132 Jy ! Component: 200 - total flux cleaned = 0.00175389 Jy ! Total flux subtracted in 200 components = 0.00175389 Jy ! Clean residual min=-0.029019 max=0.037715 Jy/beam ! Clean residual mean=0.000010 rms=0.011546 Jy/beam ! Combined flux in latest and established models = 0.45794 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.45794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122519Jy sigma=1.279590 ! Fit after self-cal, rms=0.122522Jy sigma=1.279465 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487012 Jy ! Component: 100 - total flux cleaned = 0.000584867 Jy ! Component: 150 - total flux cleaned = 0.000768948 Jy ! Component: 200 - total flux cleaned = 0.000766828 Jy ! Total flux subtracted in 200 components = 0.000766828 Jy ! Clean residual min=-0.028925 max=0.037739 Jy/beam ! Clean residual mean=0.000012 rms=0.011526 Jy/beam ! Combined flux in latest and established models = 0.458707 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.458707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122377Jy sigma=1.278051 ! Fit after self-cal, rms=0.122380Jy sigma=1.277998 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122380Jy sigma=1.277998 ! Fit after self-cal, rms=0.122381Jy sigma=1.277810 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=15.84 mas, bpa=-12.7 degrees ! Estimated noise=2.53622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353125 Jy ! Component: 100 - total flux cleaned = 0.000534593 Jy ! Component: 150 - total flux cleaned = 0.000700514 Jy ! Component: 200 - total flux cleaned = 0.000861969 Jy ! Total flux subtracted in 200 components = 0.000861969 Jy ! Clean residual min=-0.028912 max=0.037553 Jy/beam ! Clean residual mean=0.000007 rms=0.011491 Jy/beam ! Combined flux in latest and established models = 0.459569 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.459569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122250Jy sigma=1.276585 ! Fit after self-cal, rms=0.122254Jy sigma=1.276543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344857 Jy ! Component: 100 - total flux cleaned = 0.000419806 Jy ! Component: 150 - total flux cleaned = 0.000491919 Jy ! Component: 200 - total flux cleaned = 0.000561677 Jy ! Total flux subtracted in 200 components = 0.000561677 Jy ! Clean residual min=-0.028880 max=0.037544 Jy/beam ! Clean residual mean=0.000008 rms=0.011479 Jy/beam ! Combined flux in latest and established models = 0.460131 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.460131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122166Jy sigma=1.275705 ! Fit after self-cal, rms=0.122169Jy sigma=1.275685 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122169Jy sigma=1.275685 ! Fit after self-cal, rms=0.122121Jy sigma=1.275621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.084 mas, bmaj=19.38 mas, bpa=0.6541 degrees ! Estimated noise=2.86612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486097 Jy ! Component: 100 - total flux cleaned = 0.00571556 Jy ! Component: 150 - total flux cleaned = 0.00626758 Jy ! Component: 200 - total flux cleaned = 0.00656748 Jy ! Total flux subtracted in 200 components = 0.00656748 Jy ! Clean residual min=-0.041685 max=0.051364 Jy/beam ! Clean residual mean=0.000023 rms=0.018617 Jy/beam ! Combined flux in latest and established models = 0.466698 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 89 components and 0.466698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122089Jy sigma=1.275249 ! Fit after self-cal, rms=0.122088Jy sigma=1.274999 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360089 Jy ! Component: 100 - total flux cleaned = 0.000628631 Jy ! Component: 150 - total flux cleaned = 0.000784473 Jy ! Component: 200 - total flux cleaned = 0.000939624 Jy ! Total flux subtracted in 200 components = 0.000939624 Jy ! Clean residual min=-0.041721 max=0.051459 Jy/beam ! Clean residual mean=0.000024 rms=0.018593 Jy/beam ! Combined flux in latest and established models = 0.467638 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 94 components and 0.467638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122144Jy sigma=1.275318 ! Fit after self-cal, rms=0.122143Jy sigma=1.275197 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=15.84 mas, bpa=-12.69 degrees ! Estimated noise=2.53436 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.657 x 15.84 at -12.69 degrees (North through East) ! Clean map min=-0.028361 max=0.42487 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=15.76 mas, bpa=-13.9 degrees ! Estimated noise=3.12834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.330724 Jy ! Component: 100 - total flux cleaned = 0.404488 Jy ! Component: 150 - total flux cleaned = 0.428749 Jy ! Component: 200 - total flux cleaned = 0.439585 Jy ! Total flux subtracted in 200 components = 0.439585 Jy ! Clean residual min=-0.021232 max=0.029990 Jy/beam ! Clean residual mean=0.000029 rms=0.008027 Jy/beam ! Combined flux in latest and established models = 0.439585 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.439585 Jy ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=15.84 mas, bpa=-12.69 degrees ! Estimated noise=2.53436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00905732 Jy ! Component: 100 - total flux cleaned = 0.0120678 Jy ! Component: 150 - total flux cleaned = 0.014128 Jy ! Component: 200 - total flux cleaned = 0.0160082 Jy ! Total flux subtracted in 200 components = 0.0160082 Jy ! Clean residual min=-0.028086 max=0.037300 Jy/beam ! Clean residual mean=-0.000003 rms=0.011560 Jy/beam ! Combined flux in latest and established models = 0.455593 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.455593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.084 mas, bmaj=19.38 mas, bpa=0.6541 degrees ! Estimated noise=2.86612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563194 Jy ! Component: 100 - total flux cleaned = 0.00722328 Jy ! Component: 150 - total flux cleaned = 0.00789596 Jy ! Component: 200 - total flux cleaned = 0.00835421 Jy ! Total flux subtracted in 200 components = 0.00835421 Jy ! Clean residual min=-0.040585 max=0.051193 Jy/beam ! Clean residual mean=0.000015 rms=0.018679 Jy/beam ! Combined flux in latest and established models = 0.463947 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424811 Jy ! Component: 100 - total flux cleaned = 0.000816831 Jy ! Component: 150 - total flux cleaned = 0.00106277 Jy ! Component: 200 - total flux cleaned = 0.00130133 Jy ! Total flux subtracted in 200 components = 0.00130133 Jy ! Clean residual min=-0.040856 max=0.051338 Jy/beam ! Clean residual mean=0.000019 rms=0.018650 Jy/beam ! Combined flux in latest and established models = 0.465249 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.465249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=15.84 mas, bpa=-12.69 degrees ! Estimated noise=2.53436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831187 Jy ! Component: 100 - total flux cleaned = -0.00206053 Jy ! Component: 150 - total flux cleaned = -0.00277131 Jy ! Component: 200 - total flux cleaned = -0.0030058 Jy ! Total flux subtracted in 200 components = -0.0030058 Jy ! Clean residual min=-0.028266 max=0.037988 Jy/beam ! Clean residual mean=0.000009 rms=0.011487 Jy/beam ! Combined flux in latest and established models = 0.462243 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.462243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122319Jy sigma=1.277403 ! Fit after self-cal, rms=0.122328Jy sigma=1.277210 wmodel J0405-1308_S_a_map.mod ! Writing 78 model components to file: J0405-1308_S_a_map.mod wobs J0405-1308_S_a_uvs.fits ! Writing UV FITS file: J0405-1308_S_a_uvs.fits wwins J0405-1308_S_a_map.win ! wwins: Wrote 1 windows to J0405-1308_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162462 Jy ! Component: 100 - total flux cleaned = 0.0239739 Jy ! Component: 150 - total flux cleaned = 0.0303926 Jy ! Component: 200 - total flux cleaned = 0.0339928 Jy ! Component: 250 - total flux cleaned = 0.0344139 Jy ! Component: 300 - total flux cleaned = 0.0344188 Jy ! Component: 350 - total flux cleaned = 0.0344157 Jy ! Component: 400 - total flux cleaned = 0.0344062 Jy ! Component: 450 - total flux cleaned = 0.0350659 Jy ! Component: 500 - total flux cleaned = 0.0356852 Jy ! Component: 550 - total flux cleaned = 0.0368742 Jy ! Component: 600 - total flux cleaned = 0.0371584 Jy ! Component: 650 - total flux cleaned = 0.0371579 Jy ! Component: 700 - total flux cleaned = 0.036895 Jy ! Component: 750 - total flux cleaned = 0.0361289 Jy ! Component: 800 - total flux cleaned = 0.0353917 Jy ! Component: 850 - total flux cleaned = 0.0351513 Jy ! Component: 900 - total flux cleaned = 0.0353844 Jy ! Component: 950 - total flux cleaned = 0.0356161 Jy ! Component: 1000 - total flux cleaned = 0.0362768 Jy ! Component: 1050 - total flux cleaned = 0.0367029 Jy ! Component: 1100 - total flux cleaned = 0.0371225 Jy ! Component: 1150 - total flux cleaned = 0.0375343 Jy ! Component: 1200 - total flux cleaned = 0.0377368 Jy ! Component: 1250 - total flux cleaned = 0.0381336 Jy ! Component: 1300 - total flux cleaned = 0.0381343 Jy ! Component: 1350 - total flux cleaned = 0.0385223 Jy ! Component: 1400 - total flux cleaned = 0.0387133 Jy ! Component: 1450 - total flux cleaned = 0.0389026 Jy ! Component: 1500 - total flux cleaned = 0.0390889 Jy ! Component: 1550 - total flux cleaned = 0.0394496 Jy ! Component: 1600 - total flux cleaned = 0.0392712 Jy ! Component: 1650 - total flux cleaned = 0.039802 Jy ! Component: 1700 - total flux cleaned = 0.0401518 Jy ! Component: 1750 - total flux cleaned = 0.0410163 Jy ! Component: 1800 - total flux cleaned = 0.0417033 Jy ! Component: 1850 - total flux cleaned = 0.0423876 Jy ! Component: 1900 - total flux cleaned = 0.0425599 Jy ! Component: 1950 - total flux cleaned = 0.0435781 Jy ! Component: 2000 - total flux cleaned = 0.0444271 Jy ! Component: 2050 - total flux cleaned = 0.0456134 Jy ! Component: 2100 - total flux cleaned = 0.0468019 Jy ! Component: 2150 - total flux cleaned = 0.047993 Jy ! Component: 2200 - total flux cleaned = 0.048676 Jy ! Component: 2250 - total flux cleaned = 0.0497018 Jy ! Component: 2300 - total flux cleaned = 0.0509018 Jy ! Component: 2350 - total flux cleaned = 0.0522778 Jy ! Component: 2400 - total flux cleaned = 0.0534868 Jy ! Component: 2450 - total flux cleaned = 0.0543539 Jy ! Component: 2500 - total flux cleaned = 0.0555721 Jy ! Component: 2550 - total flux cleaned = 0.0566239 Jy ! Component: 2600 - total flux cleaned = 0.0569779 Jy ! Component: 2650 - total flux cleaned = 0.0576868 Jy ! Component: 2700 - total flux cleaned = 0.058224 Jy ! Component: 2750 - total flux cleaned = 0.0587641 Jy ! Component: 2800 - total flux cleaned = 0.0594901 Jy ! Component: 2850 - total flux cleaned = 0.0602256 Jy ! Component: 2900 - total flux cleaned = 0.0609695 Jy ! Component: 2950 - total flux cleaned = 0.0617209 Jy ! Component: 3000 - total flux cleaned = 0.0624784 Jy ! Component: 3050 - total flux cleaned = 0.063245 Jy ! Component: 3100 - total flux cleaned = 0.0640215 Jy ! Component: 3150 - total flux cleaned = 0.0646147 Jy ! Component: 3200 - total flux cleaned = 0.0654109 Jy ! Component: 3250 - total flux cleaned = 0.0660201 Jy ! Component: 3300 - total flux cleaned = 0.0670478 Jy ! Component: 3350 - total flux cleaned = 0.0680929 Jy ! Component: 3400 - total flux cleaned = 0.0689443 Jy ! Component: 3450 - total flux cleaned = 0.0698113 Jy ! Component: 3500 - total flux cleaned = 0.0706908 Jy ! Component: 3550 - total flux cleaned = 0.07159 Jy ! Component: 3600 - total flux cleaned = 0.0725073 Jy ! Component: 3650 - total flux cleaned = 0.0734449 Jy ! Component: 3700 - total flux cleaned = 0.0743963 Jy ! Component: 3750 - total flux cleaned = 0.0753658 Jy ! Component: 3800 - total flux cleaned = 0.0763536 Jy ! Component: 3850 - total flux cleaned = 0.0773592 Jy ! Component: 3900 - total flux cleaned = 0.0781276 Jy ! Component: 3950 - total flux cleaned = 0.0783895 Jy ! Component: 4000 - total flux cleaned = 0.0786556 Jy ! Component: 4050 - total flux cleaned = 0.0792034 Jy ! Total flux subtracted in 4096 components = 0.0794847 Jy ! Clean residual min=-0.015541 max=0.017600 Jy/beam ! Clean residual mean=0.000040 rms=0.004586 Jy/beam ! Combined flux in latest and established models = 0.541727 Jy keep ! Adding 501 model components to the UV plane model. ! The established model now contains 579 components and 0.541727 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0405-1308_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.657 x 15.84 at -12.69 degrees (North through East) ! Clean map min=-0.040173 max=0.42282 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0405-1308_S_a_map.fits wmodel /image_prod/ug002_uva//J0405-1308_S_a_map.mod ! Writing 579 model components to file: /image_prod/ug002_uva//J0405-1308_S_a_map.mod wobs /image_prod/ug002_uva//J0405-1308_S_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0405-1308_S_a_uvs.fits wwins /image_prod/ug002_uva//J0405-1308_S_a_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0405-1308_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.422825 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00419852 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.9789 2.9789 5.95781 11.9156 23.8312 47.6625 95.3249 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0125 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.422 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 100.708 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0405-1308_S_a_dfm.log closed on Wed Mar 4 20:09:47 2020