! Started logfile: /image_prod/ug002_uva//J0403-2444_S_a_dfm.log on Wed Mar  4 20:09:13 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0403-2444_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0403-2444_S_a_uva.fits
! AN table 1: 74 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.988288 visibilities/baseline/integration-bin.
! Found source: J0403-2444
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9873 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0403-2444_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011119Jy  sigma=6.680046
! Fit after  self-cal, rms=0.894762Jy  sigma=5.900094
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.547 mas, bmaj=6.759 mas, bpa=-5.223 degrees
! Estimated noise=1.82792 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0836764 Jy
! Component: 100  -  total flux cleaned = 0.102044 Jy
! Total flux subtracted in 100 components = 0.102044 Jy
! Clean residual min=-0.004687 max=0.006164 Jy/beam
! Clean residual mean=-0.000007 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.102044 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.102044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089931Jy  sigma=0.471282
! Fit after  self-cal, rms=0.089887Jy  sigma=0.471101
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.176 mas, bmaj=8.122 mas, bpa=-5.055 degrees
! Estimated noise=1.12474 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595038 Jy
! Component: 100  -  total flux cleaned = 0.00845977 Jy
! Component: 150  -  total flux cleaned = 0.00912729 Jy
! Component: 200  -  total flux cleaned = 0.0092235 Jy
! Total flux subtracted in 200 components = 0.0092235 Jy
! Clean residual min=-0.003387 max=0.003609 Jy/beam
! Clean residual mean=-0.000010 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.111268 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.111268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089419Jy  sigma=0.468039
! Fit after  self-cal, rms=0.089429Jy  sigma=0.468021
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.176 x 8.122 at -5.055 degrees (North through East)
! Clean map  min=-0.0032479  max=0.10714 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.01     HN        1.16     KP        0.98     
!   LA        1.00     MK        0.97     NL        1.03     OV        1.04     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.17     KP        0.98     
!   LA        1.01     MK        1.00     NL        1.16     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.15     KP        1.01     
!   LA        0.99     MK        0.98     NL        0.84     OV        0.98     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.089429Jy  sigma=0.468021
! Fit after  self-cal, rms=0.089767Jy  sigma=0.464298
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.186 mas, bmaj=8.071 mas, bpa=-4.887 degrees
! Estimated noise=1.12263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00030075 Jy
! Component: 100  -  total flux cleaned = -0.000323173 Jy
! Component: 150  -  total flux cleaned = -0.000323144 Jy
! Component: 200  -  total flux cleaned = -0.000341355 Jy
! Total flux subtracted in 200 components = -0.000341355 Jy
! Clean residual min=-0.003010 max=0.002720 Jy/beam
! Clean residual mean=-0.000007 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.110926 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 22 components and 0.110926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089755Jy  sigma=0.464219
! Fit after  self-cal, rms=0.089823Jy  sigma=0.464120
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089823Jy  sigma=0.464120
! Fit after  self-cal, rms=0.086515Jy  sigma=0.460610
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.19 mas, bmaj=8.071 mas, bpa=-4.962 degrees
! Estimated noise=1.12651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488133 Jy
! Component: 100  -  total flux cleaned = 0.000548015 Jy
! Component: 150  -  total flux cleaned = 0.000595621 Jy
! Component: 200  -  total flux cleaned = 0.000637649 Jy
! Total flux subtracted in 200 components = 0.000637649 Jy
! Clean residual min=-0.001751 max=0.001924 Jy/beam
! Clean residual mean=-0.000005 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.111564 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.111564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086503Jy  sigma=0.460598
! Fit after  self-cal, rms=0.086543Jy  sigma=0.460547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.38129e-05 Jy
! Component: 100  -  total flux cleaned = -3.33564e-05 Jy
! Component: 150  -  total flux cleaned = -3.23299e-05 Jy
! Component: 200  -  total flux cleaned = -3.14849e-05 Jy
! Total flux subtracted in 200 components = -3.14849e-05 Jy
! Clean residual min=-0.001767 max=0.001921 Jy/beam
! Clean residual mean=-0.000005 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.111532 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.111532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086539Jy  sigma=0.460541
! Fit after  self-cal, rms=0.086539Jy  sigma=0.460538
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086539Jy  sigma=0.460538
! Fit after  self-cal, rms=0.085159Jy  sigma=0.459981
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.191 mas, bmaj=8.063 mas, bpa=-4.963 degrees
! Estimated noise=1.12655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.40428e-05 Jy
! Component: 100  -  total flux cleaned = 7.41414e-05 Jy
! Component: 150  -  total flux cleaned = 7.51507e-05 Jy
! Component: 200  -  total flux cleaned = 9.02136e-05 Jy
! Total flux subtracted in 200 components = 9.02136e-05 Jy
! Clean residual min=-0.001820 max=0.001939 Jy/beam
! Clean residual mean=-0.000006 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.111623 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.111623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085156Jy  sigma=0.459976
! Fit after  self-cal, rms=0.085147Jy  sigma=0.459966
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (71.5, 13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000812903 Jy
! Component: 100  -  total flux cleaned = 0.000861475 Jy
! Component: 150  -  total flux cleaned = 0.000898846 Jy
! Component: 200  -  total flux cleaned = 0.000929079 Jy
! Total flux subtracted in 200 components = 0.000929079 Jy
! Clean residual min=-0.001648 max=0.001656 Jy/beam
! Clean residual mean=-0.000009 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.112552 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 0.112552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085083Jy  sigma=0.459605
! Fit after  self-cal, rms=0.085072Jy  sigma=0.459584
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085072Jy  sigma=0.459584
! Fit after  self-cal, rms=0.084999Jy  sigma=0.459565
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.943 mas, bmaj=18.23 mas, bpa=-1.051 degrees
! Estimated noise=1.37058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.81891e-05 Jy
! Component: 100  -  total flux cleaned = 9.96928e-05 Jy
! Component: 150  -  total flux cleaned = 0.000125801 Jy
! Component: 200  -  total flux cleaned = 0.000162601 Jy
! Total flux subtracted in 200 components = 0.000162601 Jy
! Clean residual min=-0.001557 max=0.001921 Jy/beam
! Clean residual mean=-0.000020 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.112714 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 80 components and 0.112714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084995Jy  sigma=0.459532
! Fit after  self-cal, rms=0.084992Jy  sigma=0.459530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.58271e-05 Jy
! Component: 100  -  total flux cleaned = 8.45629e-06 Jy
! Component: 150  -  total flux cleaned = 3.02456e-05 Jy
! Component: 200  -  total flux cleaned = 6.12278e-05 Jy
! Total flux subtracted in 200 components = 6.12278e-05 Jy
! Clean residual min=-0.001525 max=0.001905 Jy/beam
! Clean residual mean=-0.000020 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.112776 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.112776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084989Jy  sigma=0.459514
! Fit after  self-cal, rms=0.084988Jy  sigma=0.459514
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=8.064 mas, bpa=-4.989 degrees
! Estimated noise=1.12595 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.192 x 8.064 at -4.989 degrees (North through East)
! Clean map  min=-0.0019932  max=0.10769 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.556 mas, bmaj=6.705 mas, bpa=-5.186 degrees
! Estimated noise=1.8259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0835445 Jy
! Component: 100  -  total flux cleaned = 0.102129 Jy
! Component: 150  -  total flux cleaned = 0.107122 Jy
! Component: 200  -  total flux cleaned = 0.107935 Jy
! Total flux subtracted in 200 components = 0.107935 Jy
! Clean residual min=-0.003137 max=0.003376 Jy/beam
! Clean residual mean=-0.000004 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.107935 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.107935 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=8.064 mas, bpa=-4.989 degrees
! Estimated noise=1.12595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254753 Jy
! Component: 100  -  total flux cleaned = 0.00317991 Jy
! Component: 150  -  total flux cleaned = 0.00362656 Jy
! Component: 200  -  total flux cleaned = 0.0039209 Jy
! Total flux subtracted in 200 components = 0.0039209 Jy
! Clean residual min=-0.001602 max=0.001743 Jy/beam
! Clean residual mean=-0.000009 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.111856 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.111856 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.943 mas, bmaj=18.23 mas, bpa=-1.051 degrees
! Estimated noise=1.37058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000631545 Jy
! Component: 100  -  total flux cleaned = 0.000753219 Jy
! Component: 150  -  total flux cleaned = 0.00079412 Jy
! Component: 200  -  total flux cleaned = 0.000833353 Jy
! Total flux subtracted in 200 components = 0.000833353 Jy
! Clean residual min=-0.001558 max=0.001942 Jy/beam
! Clean residual mean=-0.000019 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.112689 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.48551e-05 Jy
! Component: 100  -  total flux cleaned = 6.04308e-05 Jy
! Component: 150  -  total flux cleaned = 8.27803e-05 Jy
! Component: 200  -  total flux cleaned = 0.000114812 Jy
! Total flux subtracted in 200 components = 0.000114812 Jy
! Clean residual min=-0.001548 max=0.001937 Jy/beam
! Clean residual mean=-0.000020 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.112804 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.112804 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=8.064 mas, bpa=-4.989 degrees
! Estimated noise=1.12595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00044034 Jy
! Component: 100  -  total flux cleaned = -0.000439547 Jy
! Component: 150  -  total flux cleaned = -0.000439127 Jy
! Component: 200  -  total flux cleaned = -0.000398944 Jy
! Total flux subtracted in 200 components = -0.000398944 Jy
! Clean residual min=-0.001562 max=0.001754 Jy/beam
! Clean residual mean=-0.000010 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.112405 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.112405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084984Jy  sigma=0.459512
! Fit after  self-cal, rms=0.084982Jy  sigma=0.459501
wmodel J0403-2444_S_a_map.mod
! Writing 64 model components to file: J0403-2444_S_a_map.mod
wobs   J0403-2444_S_a_uvs.fits
! Writing UV FITS file: J0403-2444_S_a_uvs.fits
wwins  J0403-2444_S_a_map.win
! wwins: Wrote 2 windows to J0403-2444_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354299 Jy
! Component: 100  -  total flux cleaned = 0.000354839 Jy
! Component: 150  -  total flux cleaned = 0.000302992 Jy
! Component: 200  -  total flux cleaned = 0.000101943 Jy
! Component: 250  -  total flux cleaned = -0.000115056 Jy
! Component: 300  -  total flux cleaned = -0.00036979 Jy
! Component: 350  -  total flux cleaned = -0.000526204 Jy
! Component: 400  -  total flux cleaned = -0.000634581 Jy
! Component: 450  -  total flux cleaned = -0.000634873 Jy
! Component: 500  -  total flux cleaned = -0.000780398 Jy
! Component: 550  -  total flux cleaned = -0.000922412 Jy
! Component: 600  -  total flux cleaned = -0.0010412 Jy
! Component: 650  -  total flux cleaned = -0.00111839 Jy
! Component: 700  -  total flux cleaned = -0.00113715 Jy
! Component: 750  -  total flux cleaned = -0.00121196 Jy
! Component: 800  -  total flux cleaned = -0.00126736 Jy
! Component: 850  -  total flux cleaned = -0.00135767 Jy
! Component: 900  -  total flux cleaned = -0.00144634 Jy
! Component: 950  -  total flux cleaned = -0.0014813 Jy
! Component: 1000  -  total flux cleaned = -0.00161977 Jy
! Component: 1050  -  total flux cleaned = -0.00167082 Jy
! Component: 1100  -  total flux cleaned = -0.00183822 Jy
! Component: 1150  -  total flux cleaned = -0.00188763 Jy
! Component: 1200  -  total flux cleaned = -0.00205081 Jy
! Component: 1250  -  total flux cleaned = -0.00219538 Jy
! Component: 1300  -  total flux cleaned = -0.00227464 Jy
! Component: 1350  -  total flux cleaned = -0.00240027 Jy
! Component: 1400  -  total flux cleaned = -0.00252421 Jy
! Component: 1450  -  total flux cleaned = -0.00264656 Jy
! Component: 1500  -  total flux cleaned = -0.00275222 Jy
! Component: 1550  -  total flux cleaned = -0.00281222 Jy
! Component: 1600  -  total flux cleaned = -0.00295992 Jy
! Component: 1650  -  total flux cleaned = -0.00309127 Jy
! Component: 1700  -  total flux cleaned = -0.00313463 Jy
! Component: 1750  -  total flux cleaned = -0.00330596 Jy
! Component: 1800  -  total flux cleaned = -0.00343275 Jy
! Component: 1850  -  total flux cleaned = -0.0035023 Jy
! Component: 1900  -  total flux cleaned = -0.00359909 Jy
! Component: 1950  -  total flux cleaned = -0.00372212 Jy
! Component: 2000  -  total flux cleaned = -0.00384375 Jy
! Component: 2050  -  total flux cleaned = -0.0039108 Jy
! Component: 2100  -  total flux cleaned = -0.0040039 Jy
! Component: 2150  -  total flux cleaned = -0.00412235 Jy
! Component: 2200  -  total flux cleaned = -0.00420051 Jy
! Component: 2250  -  total flux cleaned = -0.00427804 Jy
! Component: 2300  -  total flux cleaned = -0.00440605 Jy
! Component: 2350  -  total flux cleaned = -0.00445666 Jy
! Component: 2400  -  total flux cleaned = -0.00453208 Jy
! Component: 2450  -  total flux cleaned = -0.00455703 Jy
! Component: 2500  -  total flux cleaned = -0.00463116 Jy
! Component: 2550  -  total flux cleaned = -0.00466794 Jy
! Component: 2600  -  total flux cleaned = -0.00476509 Jy
! Component: 2650  -  total flux cleaned = -0.00480135 Jy
! Component: 2700  -  total flux cleaned = -0.00487304 Jy
! Component: 2750  -  total flux cleaned = -0.0048849 Jy
! Component: 2800  -  total flux cleaned = -0.00492041 Jy
! Component: 2850  -  total flux cleaned = -0.00493221 Jy
! Component: 2900  -  total flux cleaned = -0.00501346 Jy
! Component: 2950  -  total flux cleaned = -0.00501344 Jy
! Component: 3000  -  total flux cleaned = -0.00508201 Jy
! Component: 3050  -  total flux cleaned = -0.00509331 Jy
! Component: 3100  -  total flux cleaned = -0.00510445 Jy
! Component: 3150  -  total flux cleaned = -0.00513807 Jy
! Component: 3200  -  total flux cleaned = -0.00512691 Jy
! Component: 3250  -  total flux cleaned = -0.00514907 Jy
! Component: 3300  -  total flux cleaned = -0.00514908 Jy
! Component: 3350  -  total flux cleaned = -0.00520391 Jy
! Component: 3400  -  total flux cleaned = -0.00524724 Jy
! Component: 3450  -  total flux cleaned = -0.00526876 Jy
! Component: 3500  -  total flux cleaned = -0.00526878 Jy
! Component: 3550  -  total flux cleaned = -0.00530077 Jy
! Component: 3600  -  total flux cleaned = -0.00531142 Jy
! Component: 3650  -  total flux cleaned = -0.00531134 Jy
! Component: 3700  -  total flux cleaned = -0.00527981 Jy
! Component: 3750  -  total flux cleaned = -0.00531115 Jy
! Component: 3800  -  total flux cleaned = -0.00530077 Jy
! Component: 3850  -  total flux cleaned = -0.0053318 Jy
! Component: 3900  -  total flux cleaned = -0.00535239 Jy
! Component: 3950  -  total flux cleaned = -0.00535243 Jy
! Component: 4000  -  total flux cleaned = -0.00532189 Jy
! Component: 4050  -  total flux cleaned = -0.00535225 Jy
! Total flux subtracted in 4096 components = -0.00536234 Jy
! Clean residual min=-0.000584 max=0.000586 Jy/beam
! Clean residual mean=-0.000003 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.107042 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 360 components and 0.107042 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0403-2444_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.192 x 8.064 at -4.989 degrees (North through East)
! Clean map  min=-0.0020812  max=0.10742 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0403-2444_S_a_map.fits
wmodel /image_prod/ug002_uva//J0403-2444_S_a_map.mod
! Writing 360 model components to file: /image_prod/ug002_uva//J0403-2444_S_a_map.mod
wobs   /image_prod/ug002_uva//J0403-2444_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0403-2444_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J0403-2444_S_a_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0403-2444_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.107425 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181513 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.506902 0.506902 1.0138 2.02761 4.05522 8.11043 16.2209 32.4417 64.8835
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  591.83 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0403-2444_S_a_dfm.log closed on Wed Mar  4 20:09:16 2020