! Started logfile: /image_prod/ug002_uva//J0359-2615_S_dfm.log on Wed Mar  4 20:07:38 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0359-2615_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0359-2615_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881481 visibilities/baseline/integration-bin.
! Found source: J0359-2615
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5712 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0359-2615_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.069379Jy  sigma=6.689473
! Fit after  self-cal, rms=0.730694Jy  sigma=4.454936
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.832 mas, bmaj=13.6 mas, bpa=-20.55 degrees
! Estimated noise=2.73687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.205522 Jy
! Component: 100  -  total flux cleaned = 0.296164 Jy
! Total flux subtracted in 100 components = 0.296164 Jy
! Clean residual min=-0.023827 max=0.047987 Jy/beam
! Clean residual mean=-0.000366 rms=0.008865 Jy/beam
! Combined flux in latest and established models = 0.296164 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.296164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.168507Jy  sigma=0.996393
! Fit after  self-cal, rms=0.168096Jy  sigma=0.994419
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.352 mas, bmaj=15.13 mas, bpa=-19.08 degrees
! Estimated noise=1.57481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0863523 Jy
! Component: 100  -  total flux cleaned = 0.137304 Jy
! Component: 150  -  total flux cleaned = 0.171377 Jy
! Component: 200  -  total flux cleaned = 0.195299 Jy
! Total flux subtracted in 200 components = 0.195299 Jy
! Clean residual min=-0.014510 max=0.028321 Jy/beam
! Clean residual mean=-0.000213 rms=0.005252 Jy/beam
! Combined flux in latest and established models = 0.491463 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 114 components and 0.491463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118483Jy  sigma=0.566235
! Fit after  self-cal, rms=0.116860Jy  sigma=0.554077
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.352 x 15.13 at -19.08 degrees (North through East)
! Clean map  min=-0.013606  max=0.24495 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.89     HN        1.11     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.05     OV        1.06     
!   PT        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.91     HN        1.11     KP        0.97     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.91     HN        1.10     KP        0.96     
!   LA        1.03     MK        1.01     NL        0.97     OV        1.07     
!   PT        0.92     
! 
! 
! Fit before self-cal, rms=0.116860Jy  sigma=0.554077
! Fit after  self-cal, rms=0.125309Jy  sigma=0.499150
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.406 mas, bmaj=15.62 mas, bpa=-19.33 degrees
! Estimated noise=1.54701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.5, 25.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161127 Jy
! Component: 100  -  total flux cleaned = 0.0245642 Jy
! Component: 150  -  total flux cleaned = 0.0290339 Jy
! Component: 200  -  total flux cleaned = 0.0309001 Jy
! Total flux subtracted in 200 components = 0.0309001 Jy
! Clean residual min=-0.009459 max=0.009818 Jy/beam
! Clean residual mean=-0.000061 rms=0.002530 Jy/beam
! Combined flux in latest and established models = 0.522363 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 156 components and 0.522363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122961Jy  sigma=0.477741
! Fit after  self-cal, rms=0.122962Jy  sigma=0.475657
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122962Jy  sigma=0.475657
! Fit after  self-cal, rms=0.118322Jy  sigma=0.467479
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.411 mas, bmaj=15.66 mas, bpa=-19.34 degrees
! Estimated noise=1.55104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487427 Jy
! Component: 100  -  total flux cleaned = 0.00633633 Jy
! Component: 150  -  total flux cleaned = 0.00708636 Jy
! Component: 200  -  total flux cleaned = 0.00772644 Jy
! Total flux subtracted in 200 components = 0.00772644 Jy
! Clean residual min=-0.009123 max=0.008480 Jy/beam
! Clean residual mean=-0.000054 rms=0.002112 Jy/beam
! Combined flux in latest and established models = 0.530089 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 180 components and 0.530089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117665Jy  sigma=0.463263
! Fit after  self-cal, rms=0.117561Jy  sigma=0.462449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158923 Jy
! Component: 100  -  total flux cleaned = 0.00224572 Jy
! Component: 150  -  total flux cleaned = 0.00224114 Jy
! Component: 200  -  total flux cleaned = 0.0024416 Jy
! Total flux subtracted in 200 components = 0.0024416 Jy
! Clean residual min=-0.008941 max=0.007819 Jy/beam
! Clean residual mean=-0.000048 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.532531 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 204 components and 0.532531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117219Jy  sigma=0.460582
! Fit after  self-cal, rms=0.117155Jy  sigma=0.460122
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117155Jy  sigma=0.460122
! Fit after  self-cal, rms=0.112535Jy  sigma=0.458158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.415 mas, bmaj=15.68 mas, bpa=-19.37 degrees
! Estimated noise=1.55013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141692 Jy
! Component: 100  -  total flux cleaned = 0.00221963 Jy
! Component: 150  -  total flux cleaned = 0.003024 Jy
! Component: 200  -  total flux cleaned = 0.00333466 Jy
! Total flux subtracted in 200 components = 0.00333466 Jy
! Clean residual min=-0.008439 max=0.007313 Jy/beam
! Clean residual mean=-0.000046 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 0.535866 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 229 components and 0.535866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112112Jy  sigma=0.456342
! Fit after  self-cal, rms=0.112049Jy  sigma=0.455982
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103769 Jy
! Component: 100  -  total flux cleaned = 0.00113695 Jy
! Component: 150  -  total flux cleaned = 0.00104907 Jy
! Component: 200  -  total flux cleaned = 0.00105247 Jy
! Total flux subtracted in 200 components = 0.00105247 Jy
! Clean residual min=-0.008261 max=0.007085 Jy/beam
! Clean residual mean=-0.000043 rms=0.001783 Jy/beam
! Combined flux in latest and established models = 0.536918 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 255 components and 0.536918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111803Jy  sigma=0.454929
! Fit after  self-cal, rms=0.111775Jy  sigma=0.454666
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111775Jy  sigma=0.454666
! Fit after  self-cal, rms=0.111135Jy  sigma=0.454353
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.285 mas, bmaj=24.44 mas, bpa=-6.672 degrees
! Estimated noise=1.84437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405463 Jy
! Component: 100  -  total flux cleaned = 0.00472776 Jy
! Component: 150  -  total flux cleaned = 0.00521201 Jy
! Component: 200  -  total flux cleaned = 0.00555184 Jy
! Total flux subtracted in 200 components = 0.00555184 Jy
! Clean residual min=-0.008795 max=0.008104 Jy/beam
! Clean residual mean=-0.000067 rms=0.002401 Jy/beam
! Combined flux in latest and established models = 0.54247 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 278 components and 0.54247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110989Jy  sigma=0.453240
! Fit after  self-cal, rms=0.110960Jy  sigma=0.452948
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012025 Jy
! Component: 100  -  total flux cleaned = 0.00112336 Jy
! Component: 150  -  total flux cleaned = 0.00119864 Jy
! Component: 200  -  total flux cleaned = 0.0013272 Jy
! Total flux subtracted in 200 components = 0.0013272 Jy
! Clean residual min=-0.008671 max=0.007807 Jy/beam
! Clean residual mean=-0.000062 rms=0.002318 Jy/beam
! Combined flux in latest and established models = 0.543797 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 309 components and 0.543797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110835Jy  sigma=0.452522
! Fit after  self-cal, rms=0.110839Jy  sigma=0.452364
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=15.72 mas, bpa=-19.42 degrees
! Estimated noise=1.55501 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.422 x 15.72 at -19.42 degrees (North through East)
! Clean map  min=-0.0075394  max=0.23555 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.879 mas, bmaj=14.07 mas, bpa=-20.89 degrees
! Estimated noise=2.73465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203655 Jy
! Component: 100  -  total flux cleaned = 0.294195 Jy
! Component: 150  -  total flux cleaned = 0.351261 Jy
! Component: 200  -  total flux cleaned = 0.390048 Jy
! Total flux subtracted in 200 components = 0.390048 Jy
! Clean residual min=-0.013200 max=0.021437 Jy/beam
! Clean residual mean=-0.000194 rms=0.004536 Jy/beam
! Combined flux in latest and established models = 0.390048 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 64 model components to the UV plane model.
! The established model now contains 64 components and 0.390048 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=15.72 mas, bpa=-19.42 degrees
! Estimated noise=1.55501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040085 Jy
! Component: 100  -  total flux cleaned = 0.0652668 Jy
! Component: 150  -  total flux cleaned = 0.0832362 Jy
! Component: 200  -  total flux cleaned = 0.0970737 Jy
! Total flux subtracted in 200 components = 0.0970737 Jy
! Clean residual min=-0.010121 max=0.009584 Jy/beam
! Clean residual mean=-0.000133 rms=0.002889 Jy/beam
! Combined flux in latest and established models = 0.487122 Jy
! Adding 105 model components to the UV plane model.
! The established model now contains 161 components and 0.487122 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.285 mas, bmaj=24.44 mas, bpa=-6.672 degrees
! Estimated noise=1.84437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169859 Jy
! Component: 100  -  total flux cleaned = 0.0285998 Jy
! Component: 150  -  total flux cleaned = 0.0369687 Jy
! Component: 200  -  total flux cleaned = 0.043217 Jy
! Total flux subtracted in 200 components = 0.043217 Jy
! Clean residual min=-0.009637 max=0.007759 Jy/beam
! Clean residual mean=-0.000106 rms=0.002692 Jy/beam
! Combined flux in latest and established models = 0.530339 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00475993 Jy
! Component: 100  -  total flux cleaned = 0.00731393 Jy
! Component: 150  -  total flux cleaned = 0.00869321 Jy
! Component: 200  -  total flux cleaned = 0.00959184 Jy
! Total flux subtracted in 200 components = 0.00959184 Jy
! Clean residual min=-0.008562 max=0.007695 Jy/beam
! Clean residual mean=-0.000077 rms=0.002425 Jy/beam
! Combined flux in latest and established models = 0.539931 Jy
! Adding 133 model components to the UV plane model.
! The established model now contains 285 components and 0.53993 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=15.72 mas, bpa=-19.42 degrees
! Estimated noise=1.55501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000895181 Jy
! Component: 100  -  total flux cleaned = 0.00126514 Jy
! Component: 150  -  total flux cleaned = 0.00191972 Jy
! Component: 200  -  total flux cleaned = 0.0020172 Jy
! Total flux subtracted in 200 components = 0.0020172 Jy
! Clean residual min=-0.007205 max=0.006425 Jy/beam
! Clean residual mean=-0.000038 rms=0.001696 Jy/beam
! Combined flux in latest and established models = 0.541948 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 313 components and 0.541948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110758Jy  sigma=0.453304
! Fit after  self-cal, rms=0.110653Jy  sigma=0.452530
wmodel J0359-2615_S_map.mod
! Writing 313 model components to file: J0359-2615_S_map.mod
wobs   J0359-2615_S_uvs.fits
! Writing UV FITS file: J0359-2615_S_uvs.fits
wwins  J0359-2615_S_map.win
! wwins: Wrote 3 windows to J0359-2615_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206037 Jy
! Component: 100  -  total flux cleaned = 0.000134116 Jy
! Component: 150  -  total flux cleaned = 0.000135504 Jy
! Component: 200  -  total flux cleaned = 0.000138513 Jy
! Component: 250  -  total flux cleaned = 0.000135944 Jy
! Component: 300  -  total flux cleaned = 0.000385144 Jy
! Component: 350  -  total flux cleaned = 0.000621879 Jy
! Component: 400  -  total flux cleaned = 0.000773014 Jy
! Component: 450  -  total flux cleaned = 0.000772981 Jy
! Component: 500  -  total flux cleaned = 0.000701569 Jy
! Component: 550  -  total flux cleaned = 0.000903012 Jy
! Component: 600  -  total flux cleaned = 0.000836156 Jy
! Component: 650  -  total flux cleaned = 0.000962725 Jy
! Component: 700  -  total flux cleaned = 0.0009005 Jy
! Component: 750  -  total flux cleaned = 0.000780294 Jy
! Component: 800  -  total flux cleaned = 0.000605881 Jy
! Component: 850  -  total flux cleaned = 0.00049256 Jy
! Component: 900  -  total flux cleaned = 0.000380909 Jy
! Component: 950  -  total flux cleaned = 0.000165582 Jy
! Component: 1000  -  total flux cleaned = 6.04685e-05 Jy
! Component: 1050  -  total flux cleaned = -0.000145534 Jy
! Component: 1100  -  total flux cleaned = -0.000246867 Jy
! Component: 1150  -  total flux cleaned = -0.000491996 Jy
! Component: 1200  -  total flux cleaned = -0.000683209 Jy
! Component: 1250  -  total flux cleaned = -0.0007768 Jy
! Component: 1300  -  total flux cleaned = -0.00105315 Jy
! Component: 1350  -  total flux cleaned = -0.00136799 Jy
! Component: 1400  -  total flux cleaned = -0.00154387 Jy
! Component: 1450  -  total flux cleaned = -0.00184644 Jy
! Component: 1500  -  total flux cleaned = -0.00197292 Jy
! Component: 1550  -  total flux cleaned = -0.00218147 Jy
! Component: 1600  -  total flux cleaned = -0.00234581 Jy
! Component: 1650  -  total flux cleaned = -0.00250757 Jy
! Component: 1700  -  total flux cleaned = -0.00270569 Jy
! Component: 1750  -  total flux cleaned = -0.00297711 Jy
! Component: 1800  -  total flux cleaned = -0.00309154 Jy
! Component: 1850  -  total flux cleaned = -0.00331706 Jy
! Component: 1900  -  total flux cleaned = -0.00346487 Jy
! Component: 1950  -  total flux cleaned = -0.00357409 Jy
! Component: 2000  -  total flux cleaned = -0.00382457 Jy
! Component: 2050  -  total flux cleaned = -0.00396462 Jy
! Component: 2100  -  total flux cleaned = -0.00406916 Jy
! Component: 2150  -  total flux cleaned = -0.00420646 Jy
! Component: 2200  -  total flux cleaned = -0.00437472 Jy
! Component: 2250  -  total flux cleaned = -0.00454072 Jy
! Component: 2300  -  total flux cleaned = -0.00463931 Jy
! Component: 2350  -  total flux cleaned = -0.00480033 Jy
! Component: 2400  -  total flux cleaned = -0.00499156 Jy
! Component: 2450  -  total flux cleaned = -0.00511702 Jy
! Component: 2500  -  total flux cleaned = -0.00533419 Jy
! Component: 2550  -  total flux cleaned = -0.00542566 Jy
! Component: 2600  -  total flux cleaned = -0.00563713 Jy
! Component: 2650  -  total flux cleaned = -0.00572659 Jy
! Component: 2700  -  total flux cleaned = -0.00587396 Jy
! Component: 2750  -  total flux cleaned = -0.00601966 Jy
! Component: 2800  -  total flux cleaned = -0.00613466 Jy
! Component: 2850  -  total flux cleaned = -0.00621998 Jy
! Component: 2900  -  total flux cleaned = -0.00633254 Jy
! Component: 2950  -  total flux cleaned = -0.00641638 Jy
! Component: 3000  -  total flux cleaned = -0.00649923 Jy
! Component: 3050  -  total flux cleaned = -0.00660829 Jy
! Component: 3100  -  total flux cleaned = -0.00668916 Jy
! Component: 3150  -  total flux cleaned = -0.00674221 Jy
! Component: 3200  -  total flux cleaned = -0.006795 Jy
! Component: 3250  -  total flux cleaned = -0.00679475 Jy
! Component: 3300  -  total flux cleaned = -0.00689778 Jy
! Component: 3350  -  total flux cleaned = -0.00692318 Jy
! Component: 3400  -  total flux cleaned = -0.00697353 Jy
! Component: 3450  -  total flux cleaned = -0.00704837 Jy
! Component: 3500  -  total flux cleaned = -0.00699877 Jy
! Component: 3550  -  total flux cleaned = -0.00707221 Jy
! Component: 3600  -  total flux cleaned = -0.0071447 Jy
! Component: 3650  -  total flux cleaned = -0.0071684 Jy
! Component: 3700  -  total flux cleaned = -0.00716822 Jy
! Component: 3750  -  total flux cleaned = -0.00726261 Jy
! Component: 3800  -  total flux cleaned = -0.00726246 Jy
! Component: 3850  -  total flux cleaned = -0.00728571 Jy
! Component: 3900  -  total flux cleaned = -0.00740034 Jy
! Component: 3950  -  total flux cleaned = -0.00742301 Jy
! Component: 4000  -  total flux cleaned = -0.00744554 Jy
! Component: 4050  -  total flux cleaned = -0.00749066 Jy
! Total flux subtracted in 4096 components = -0.00757946 Jy
! Clean residual min=-0.001367 max=0.001392 Jy/beam
! Clean residual mean=0.000005 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.534368 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 633 components and 0.534368 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0359-2615_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.422 x 15.72 at -19.42 degrees (North through East)
! Clean map  min=-0.0039394  max=0.23079 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0359-2615_S_map.fits
wmodel /image_prod/ug002_uva//J0359-2615_S_map.mod
! Writing 633 model components to file: /image_prod/ug002_uva//J0359-2615_S_map.mod
wobs   /image_prod/ug002_uva//J0359-2615_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0359-2615_S_uvs.fits
wwins  /image_prod/ug002_uva//J0359-2615_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0359-2615_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.230789 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000412446 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.536134 0.536134 1.07227 2.14453 4.28907 8.57814 17.1563 34.3125 68.6251
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.23 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  559.562 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0359-2615_S_dfm.log closed on Wed Mar  4 20:07:42 2020