! Started logfile: /image_prod/ug002_uva//J0359+3220_X_dfm.log on Wed Mar 4 20:07:08 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0359+3220_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0359+3220_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895926 visibilities/baseline/integration-bin. ! Found source: J0359+3220 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29028 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0359+3220_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.148031Jy sigma=8.236702 ! Fit after self-cal, rms=0.497661Jy sigma=3.636478 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6858 mas, bmaj=1.338 mas, bpa=-2.026 degrees ! Estimated noise=1.16868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.375235 Jy ! Component: 100 - total flux cleaned = 0.507146 Jy ! Total flux subtracted in 100 components = 0.507146 Jy ! Clean residual min=-0.018630 max=0.058495 Jy/beam ! Clean residual mean=0.000003 rms=0.004766 Jy/beam ! Combined flux in latest and established models = 0.507146 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.507146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146150Jy sigma=1.009591 ! Fit after self-cal, rms=0.145968Jy sigma=1.008255 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633889 Jy ! Component: 100 - total flux cleaned = 0.0942534 Jy ! Total flux subtracted in 100 components = 0.0942534 Jy ! Clean residual min=-0.013912 max=0.027924 Jy/beam ! Clean residual mean=0.000002 rms=0.003206 Jy/beam ! Combined flux in latest and established models = 0.601399 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.601399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107649Jy sigma=0.736617 ! Fit after self-cal, rms=0.107601Jy sigma=0.736349 ! Inverting map ! Added new window around map position (-1.6, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266588 Jy ! Component: 100 - total flux cleaned = 0.0434004 Jy ! Total flux subtracted in 100 components = 0.0434004 Jy ! Clean residual min=-0.012652 max=0.015572 Jy/beam ! Clean residual mean=0.000001 rms=0.002789 Jy/beam ! Combined flux in latest and established models = 0.644799 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.644799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096741Jy sigma=0.662716 ! Fit after self-cal, rms=0.096067Jy sigma=0.656876 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.888 mas, bmaj=1.642 mas, bpa=-1.987 degrees ! Estimated noise=0.584489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219785 Jy ! Component: 100 - total flux cleaned = 0.0356668 Jy ! Component: 150 - total flux cleaned = 0.0451923 Jy ! Component: 200 - total flux cleaned = 0.050718 Jy ! Total flux subtracted in 200 components = 0.050718 Jy ! Clean residual min=-0.014346 max=0.016521 Jy/beam ! Clean residual mean=-0.000007 rms=0.003140 Jy/beam ! Combined flux in latest and established models = 0.695517 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.695517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089705Jy sigma=0.615690 ! Fit after self-cal, rms=0.089186Jy sigma=0.610804 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.888 x 1.642 at -1.987 degrees (North through East) ! Clean map min=-0.013113 max=0.50428 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.95 KP 1.08 ! LA 0.96 MK 1.04 NL 1.22 OV 1.00 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 0.96 KP 1.09 ! LA 0.96 MK 1.06 NL 1.20 OV 1.00 ! PT 0.89 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.97 KP 1.07 ! LA 0.98 MK 1.00 NL 1.20 OV 1.00 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.94 KP 1.07 ! LA 0.98 MK 1.05 NL 1.20 OV 1.01 ! PT 0.89 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.97 KP 1.08 ! LA 0.98 MK 1.05 NL 1.20 OV 1.01 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.97 KP 1.08 ! LA 0.99 MK 1.05 NL 1.19 OV 0.99 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.99 KP 1.09 ! LA 0.98 MK 1.06 NL 1.20 OV 1.00 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.97 KP 1.07 ! LA 0.98 MK 1.07 NL 1.22 OV 1.01 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.00 KP 1.08 ! LA 0.98 MK 1.06 NL 1.19 OV 1.02 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.00 KP 1.07 ! LA 0.99 MK 1.07 NL 1.22 OV 1.01 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.09 ! LA 1.00 MK 1.08 NL 1.20 OV 1.04 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.01 KP 1.07 ! LA 0.99 MK 1.07 NL 1.22 OV 1.04 ! PT 0.90 SC 0.98 ! ! ! Fit before self-cal, rms=0.089186Jy sigma=0.610804 ! Fit after self-cal, rms=0.069835Jy sigma=0.481960 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8897 mas, bmaj=1.637 mas, bpa=-1 degrees ! Estimated noise=0.58341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803216 Jy ! Component: 100 - total flux cleaned = 0.00688512 Jy ! Component: 150 - total flux cleaned = 0.00605597 Jy ! Component: 200 - total flux cleaned = 0.00569717 Jy ! Total flux subtracted in 200 components = 0.00569717 Jy ! Clean residual min=-0.006376 max=0.007813 Jy/beam ! Clean residual mean=-0.000006 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.701215 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.701214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066834Jy sigma=0.459556 ! Fit after self-cal, rms=0.066741Jy sigma=0.458636 ! Inverting map ! Added new window around map position (-5.4, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586261 Jy ! Component: 100 - total flux cleaned = 0.00632088 Jy ! Component: 150 - total flux cleaned = 0.00645479 Jy ! Component: 200 - total flux cleaned = 0.00634497 Jy ! Total flux subtracted in 200 components = 0.00634497 Jy ! Clean residual min=-0.005674 max=0.006249 Jy/beam ! Clean residual mean=-0.000005 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.707559 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.707559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065972Jy sigma=0.452347 ! Fit after self-cal, rms=0.065926Jy sigma=0.452055 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065926Jy sigma=0.452055 ! Fit after self-cal, rms=0.061457Jy sigma=0.423207 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=1.644 mas, bpa=-0.3401 degrees ! Estimated noise=0.582593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117605 Jy ! Component: 100 - total flux cleaned = -0.000125614 Jy ! Component: 150 - total flux cleaned = 0.00062664 Jy ! Component: 200 - total flux cleaned = 0.000899364 Jy ! Total flux subtracted in 200 components = 0.000899364 Jy ! Clean residual min=-0.003570 max=0.004826 Jy/beam ! Clean residual mean=0.000000 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.708459 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.708459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060957Jy sigma=0.419175 ! Fit after self-cal, rms=0.060914Jy sigma=0.418721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490342 Jy ! Component: 100 - total flux cleaned = 0.00647557 Jy ! Component: 150 - total flux cleaned = 0.0074281 Jy ! Component: 200 - total flux cleaned = 0.00815467 Jy ! Total flux subtracted in 200 components = 0.00815467 Jy ! Clean residual min=-0.002959 max=0.003890 Jy/beam ! Clean residual mean=0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.716613 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.716613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060433Jy sigma=0.414925 ! Fit after self-cal, rms=0.060389Jy sigma=0.414649 ! Inverting map ! Added new window around map position (-13.2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033897 Jy ! Component: 100 - total flux cleaned = 0.00513319 Jy ! Component: 150 - total flux cleaned = 0.00611102 Jy ! Component: 200 - total flux cleaned = 0.00692676 Jy ! Total flux subtracted in 200 components = 0.00692676 Jy ! Clean residual min=-0.002618 max=0.002835 Jy/beam ! Clean residual mean=0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.72354 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 112 components and 0.72354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060138Jy sigma=0.412676 ! Fit after self-cal, rms=0.060128Jy sigma=0.412610 ! Inverting map ! Added new window around map position (20.2, 26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246987 Jy ! Component: 100 - total flux cleaned = 0.00365658 Jy ! Component: 150 - total flux cleaned = 0.00432804 Jy ! Component: 200 - total flux cleaned = 0.00490244 Jy ! Total flux subtracted in 200 components = 0.00490244 Jy ! Clean residual min=-0.002354 max=0.002529 Jy/beam ! Clean residual mean=0.000001 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.728442 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 131 components and 0.728442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059974Jy sigma=0.411485 ! Fit after self-cal, rms=0.059970Jy sigma=0.411457 ! Inverting map ! Added new window around map position (9.8, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217342 Jy ! Component: 100 - total flux cleaned = 0.00323125 Jy ! Component: 150 - total flux cleaned = 0.00403745 Jy ! Component: 200 - total flux cleaned = 0.00469785 Jy ! Total flux subtracted in 200 components = 0.00469785 Jy ! Clean residual min=-0.002251 max=0.002377 Jy/beam ! Clean residual mean=0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.73314 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 148 components and 0.73314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059847Jy sigma=0.410604 ! Fit after self-cal, rms=0.059841Jy sigma=0.410577 ! Inverting map ! Added new window around map position (2.4, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106354 Jy ! Component: 100 - total flux cleaned = 0.00150438 Jy ! Component: 150 - total flux cleaned = 0.00190738 Jy ! Component: 200 - total flux cleaned = 0.00224145 Jy ! Total flux subtracted in 200 components = 0.00224145 Jy ! Clean residual min=-0.002099 max=0.001994 Jy/beam ! Clean residual mean=0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.735381 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 166 components and 0.735381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059729Jy sigma=0.409767 ! Fit after self-cal, rms=0.059726Jy sigma=0.409747 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059726Jy sigma=0.409747 ! Fit after self-cal, rms=0.059827Jy sigma=0.408878 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=1.647 mas, bpa=-0.08865 degrees ! Estimated noise=0.583122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304257 Jy ! Component: 100 - total flux cleaned = 6.20217e-05 Jy ! Component: 150 - total flux cleaned = 0.000489889 Jy ! Component: 200 - total flux cleaned = 0.00106822 Jy ! Total flux subtracted in 200 components = 0.00106822 Jy ! Clean residual min=-0.002264 max=0.001634 Jy/beam ! Clean residual mean=0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.73645 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 177 components and 0.73645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059721Jy sigma=0.408087 ! Fit after self-cal, rms=0.059715Jy sigma=0.408043 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227416 Jy ! Component: 100 - total flux cleaned = 3.94954e-05 Jy ! Component: 150 - total flux cleaned = 0.000286784 Jy ! Component: 200 - total flux cleaned = 0.000598519 Jy ! Total flux subtracted in 200 components = 0.000598519 Jy ! Clean residual min=-0.002148 max=0.001593 Jy/beam ! Clean residual mean=0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.737048 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 186 components and 0.737048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059661Jy sigma=0.407639 ! Fit after self-cal, rms=0.059657Jy sigma=0.407620 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059657Jy sigma=0.407620 ! Fit after self-cal, rms=0.059777Jy sigma=0.407479 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.079 mas, bmaj=2.629 mas, bpa=5.802 degrees ! Estimated noise=0.791069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.72963e-05 Jy ! Component: 100 - total flux cleaned = 4.52838e-06 Jy ! Component: 150 - total flux cleaned = -7.60084e-05 Jy ! Component: 200 - total flux cleaned = 2.00173e-06 Jy ! Total flux subtracted in 200 components = 2.00173e-06 Jy ! Clean residual min=-0.001974 max=0.001634 Jy/beam ! Clean residual mean=0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.73705 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 200 components and 0.73705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059741Jy sigma=0.407179 ! Fit after self-cal, rms=0.059735Jy sigma=0.407135 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.69314e-05 Jy ! Component: 100 - total flux cleaned = 8.4003e-05 Jy ! Component: 150 - total flux cleaned = 8.37782e-05 Jy ! Component: 200 - total flux cleaned = 5.48215e-05 Jy ! Total flux subtracted in 200 components = 5.48215e-05 Jy ! Clean residual min=-0.001819 max=0.001575 Jy/beam ! Clean residual mean=0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.737105 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 206 components and 0.737105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059720Jy sigma=0.407023 ! Fit after self-cal, rms=0.059719Jy sigma=0.407005 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8868 mas, bmaj=1.649 mas, bpa=0.06081 degrees ! Estimated noise=0.583569 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8868 x 1.649 at 0.06081 degrees (North through East) ! Clean map min=-0.001614 max=0.50708 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059719Jy sigma=0.407005 ! Fit after self-cal, rms=0.056664Jy sigma=0.378550 ! Inverting map and beam ! Estimated beam: bmin=0.8871 mas, bmaj=1.649 mas, bpa=0.09069 degrees ! Estimated noise=0.583635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407599 Jy ! Component: 100 - total flux cleaned = 0.000318318 Jy ! Component: 150 - total flux cleaned = 0.000278726 Jy ! Component: 200 - total flux cleaned = 0.0002797 Jy ! Total flux subtracted in 200 components = 0.0002797 Jy ! Clean residual min=-0.001857 max=0.001469 Jy/beam ! Clean residual mean=0.000000 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.737385 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 223 components and 0.737385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056601Jy sigma=0.378139 ! Fit after self-cal, rms=0.056599Jy sigma=0.378125 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188442 Jy ! Component: 100 - total flux cleaned = -0.000257817 Jy ! Component: 150 - total flux cleaned = -0.000259963 Jy ! Component: 200 - total flux cleaned = -0.000200559 Jy ! Total flux subtracted in 200 components = -0.000200559 Jy ! Clean residual min=-0.001814 max=0.001438 Jy/beam ! Clean residual mean=0.000000 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.737184 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 231 components and 0.737184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056564Jy sigma=0.377885 ! Fit after self-cal, rms=0.056562Jy sigma=0.377876 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056562Jy sigma=0.377876 ! Fit after self-cal, rms=0.056635Jy sigma=0.377797 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6844 mas, bmaj=1.349 mas, bpa=0.1859 degrees ! Estimated noise=1.16812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.372984 Jy ! Component: 100 - total flux cleaned = 0.50193 Jy ! Component: 150 - total flux cleaned = 0.563603 Jy ! Component: 200 - total flux cleaned = 0.595548 Jy ! Total flux subtracted in 200 components = 0.595548 Jy ! Clean residual min=-0.007394 max=0.016684 Jy/beam ! Clean residual mean=-0.000001 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.595548 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.595548 Jy ! Inverting map and beam ! Estimated beam: bmin=0.887 mas, bmaj=1.65 mas, bpa=0.209 degrees ! Estimated noise=0.583841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317214 Jy ! Component: 100 - total flux cleaned = 0.0519173 Jy ! Component: 150 - total flux cleaned = 0.0658086 Jy ! Component: 200 - total flux cleaned = 0.0760621 Jy ! Total flux subtracted in 200 components = 0.0760621 Jy ! Clean residual min=-0.003568 max=0.005902 Jy/beam ! Clean residual mean=-0.000004 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.67161 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.67161 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796138 Jy ! Component: 100 - total flux cleaned = 0.0144681 Jy ! Component: 150 - total flux cleaned = 0.0198678 Jy ! Component: 200 - total flux cleaned = 0.0243695 Jy ! Total flux subtracted in 200 components = 0.0243695 Jy ! Clean residual min=-0.002772 max=0.003111 Jy/beam ! Clean residual mean=-0.000002 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.69598 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 64 components and 0.69598 Jy ! Inverting map ! Added new window around map position (-7.2, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382211 Jy ! Component: 100 - total flux cleaned = 0.00703746 Jy ! Component: 150 - total flux cleaned = 0.00986322 Jy ! Component: 200 - total flux cleaned = 0.0124061 Jy ! Total flux subtracted in 200 components = 0.0124061 Jy ! Clean residual min=-0.002428 max=0.002269 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.708386 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 86 components and 0.708386 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.079 mas, bmaj=2.631 mas, bpa=5.92 degrees ! Estimated noise=0.791134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041519 Jy ! Component: 100 - total flux cleaned = 0.00725571 Jy ! Component: 150 - total flux cleaned = 0.00978866 Jy ! Component: 200 - total flux cleaned = 0.0119526 Jy ! Total flux subtracted in 200 components = 0.0119526 Jy ! Clean residual min=-0.001996 max=0.002085 Jy/beam ! Clean residual mean=0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.720338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189799 Jy ! Component: 100 - total flux cleaned = 0.00357946 Jy ! Component: 150 - total flux cleaned = 0.00508787 Jy ! Component: 200 - total flux cleaned = 0.00645078 Jy ! Total flux subtracted in 200 components = 0.00645078 Jy ! Clean residual min=-0.001846 max=0.001688 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.726789 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 157 components and 0.726789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.887 mas, bmaj=1.65 mas, bpa=0.209 degrees ! Estimated noise=0.583841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117697 Jy ! Component: 100 - total flux cleaned = 0.00209213 Jy ! Component: 150 - total flux cleaned = 0.00283635 Jy ! Component: 200 - total flux cleaned = 0.00343889 Jy ! Total flux subtracted in 200 components = 0.00343889 Jy ! Clean residual min=-0.002053 max=0.001583 Jy/beam ! Clean residual mean=0.000000 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.730228 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 182 components and 0.730228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056754Jy sigma=0.378870 ! Fit after self-cal, rms=0.056717Jy sigma=0.378589 wmodel J0359+3220_X_map.mod ! Writing 182 model components to file: J0359+3220_X_map.mod wobs J0359+3220_X_uvs.fits ! Writing UV FITS file: J0359+3220_X_uvs.fits wwins J0359+3220_X_map.win ! wwins: Wrote 10 windows to J0359+3220_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000829999 Jy ! Component: 100 - total flux cleaned = -0.00119799 Jy ! Component: 150 - total flux cleaned = -0.0015719 Jy ! Component: 200 - total flux cleaned = -0.00184551 Jy ! Component: 250 - total flux cleaned = -0.00216249 Jy ! Component: 300 - total flux cleaned = -0.00244506 Jy ! Component: 350 - total flux cleaned = -0.00272037 Jy ! Component: 400 - total flux cleaned = -0.00301315 Jy ! Component: 450 - total flux cleaned = -0.0032275 Jy ! Component: 500 - total flux cleaned = -0.00343719 Jy ! Component: 550 - total flux cleaned = -0.00364268 Jy ! Component: 600 - total flux cleaned = -0.0038661 Jy ! Component: 650 - total flux cleaned = -0.00404128 Jy ! Component: 700 - total flux cleaned = -0.00423565 Jy ! Component: 750 - total flux cleaned = -0.00446901 Jy ! Component: 800 - total flux cleaned = -0.00463614 Jy ! Component: 850 - total flux cleaned = -0.00480055 Jy ! Component: 900 - total flux cleaned = -0.00502296 Jy ! Component: 950 - total flux cleaned = -0.00512248 Jy ! Component: 1000 - total flux cleaned = -0.0052796 Jy ! Component: 1050 - total flux cleaned = -0.00539563 Jy ! Component: 1100 - total flux cleaned = -0.005472 Jy ! Component: 1150 - total flux cleaned = -0.0055474 Jy ! Component: 1200 - total flux cleaned = -0.00562192 Jy ! Component: 1250 - total flux cleaned = -0.0057694 Jy ! Component: 1300 - total flux cleaned = -0.00586041 Jy ! Component: 1350 - total flux cleaned = -0.00600382 Jy ! Component: 1400 - total flux cleaned = -0.00598596 Jy ! Component: 1450 - total flux cleaned = -0.0060389 Jy ! Component: 1500 - total flux cleaned = -0.00617772 Jy ! Component: 1550 - total flux cleaned = -0.00619443 Jy ! Component: 1600 - total flux cleaned = -0.00622825 Jy ! Component: 1650 - total flux cleaned = -0.00627831 Jy ! Component: 1700 - total flux cleaned = -0.00624501 Jy ! Component: 1750 - total flux cleaned = -0.00624494 Jy ! Component: 1800 - total flux cleaned = -0.00627736 Jy ! Component: 1850 - total flux cleaned = -0.00635785 Jy ! Component: 1900 - total flux cleaned = -0.00645332 Jy ! Component: 1950 - total flux cleaned = -0.00645341 Jy ! Component: 2000 - total flux cleaned = -0.00648501 Jy ! Component: 2050 - total flux cleaned = -0.00657768 Jy ! Component: 2100 - total flux cleaned = -0.00653155 Jy ! Component: 2150 - total flux cleaned = -0.00659246 Jy ! Component: 2200 - total flux cleaned = -0.00663753 Jy ! Component: 2250 - total flux cleaned = -0.00669708 Jy ! Component: 2300 - total flux cleaned = -0.00677092 Jy ! Component: 2350 - total flux cleaned = -0.00682939 Jy ! Component: 2400 - total flux cleaned = -0.00684371 Jy ! Component: 2450 - total flux cleaned = -0.00694436 Jy ! Component: 2500 - total flux cleaned = -0.00694422 Jy ! Component: 2550 - total flux cleaned = -0.00698696 Jy ! Component: 2600 - total flux cleaned = -0.007001 Jy ! Component: 2650 - total flux cleaned = -0.00708463 Jy ! Component: 2700 - total flux cleaned = -0.00707079 Jy ! Component: 2750 - total flux cleaned = -0.0070982 Jy ! Component: 2800 - total flux cleaned = -0.00716631 Jy ! Component: 2850 - total flux cleaned = -0.00720676 Jy ! Component: 2900 - total flux cleaned = -0.00720677 Jy ! Component: 2950 - total flux cleaned = -0.00726004 Jy ! Component: 3000 - total flux cleaned = -0.00735233 Jy ! Component: 3050 - total flux cleaned = -0.00737831 Jy ! Component: 3100 - total flux cleaned = -0.00737835 Jy ! Component: 3150 - total flux cleaned = -0.00741694 Jy ! Component: 3200 - total flux cleaned = -0.00746818 Jy ! Component: 3250 - total flux cleaned = -0.00750648 Jy ! Component: 3300 - total flux cleaned = -0.00753166 Jy ! Component: 3350 - total flux cleaned = -0.00756919 Jy ! Component: 3400 - total flux cleaned = -0.00765626 Jy ! Component: 3450 - total flux cleaned = -0.00761911 Jy ! Component: 3500 - total flux cleaned = -0.00766828 Jy ! Component: 3550 - total flux cleaned = -0.00768052 Jy ! Component: 3600 - total flux cleaned = -0.00768056 Jy ! Component: 3650 - total flux cleaned = -0.00774086 Jy ! Component: 3700 - total flux cleaned = -0.0077767 Jy ! Component: 3750 - total flux cleaned = -0.0078124 Jy ! Component: 3800 - total flux cleaned = -0.00782429 Jy ! Component: 3850 - total flux cleaned = -0.007836 Jy ! Component: 3900 - total flux cleaned = -0.00789437 Jy ! Component: 3950 - total flux cleaned = -0.00795237 Jy ! Component: 4000 - total flux cleaned = -0.00796385 Jy ! Component: 4050 - total flux cleaned = -0.00804388 Jy ! Total flux subtracted in 4096 components = -0.00800968 Jy ! Clean residual min=-0.000695 max=0.000584 Jy/beam ! Clean residual mean=0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.722218 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 495 components and 0.722218 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0359+3220_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.887 x 1.65 at 0.209 degrees (North through East) ! Clean map min=-0.0013057 max=0.50768 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0359+3220_X_map.fits wmodel /image_prod/ug002_uva//J0359+3220_X_map.mod ! Writing 495 model components to file: /image_prod/ug002_uva//J0359+3220_X_map.mod wobs /image_prod/ug002_uva//J0359+3220_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0359+3220_X_uvs.fits wwins /image_prod/ug002_uva//J0359+3220_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0359+3220_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.507676 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193548 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.114373 0.114373 0.228745 0.457491 0.914982 1.82996 3.65993 7.31985 14.6397 29.2794 58.5588 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.507 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2623 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0359+3220_X_dfm.log closed on Wed Mar 4 20:07:14 2020