! Started logfile: /image_prod/ug002_uva//J0356+2903_X_dfm.log on Wed Mar  4 20:05:58 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0356+2903_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0356+2903_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.976852 visibilities/baseline/integration-bin.
! Found source: J0356+2903
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0356+2903_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009010Jy  sigma=9.649886
! Fit after  self-cal, rms=0.883012Jy  sigma=8.435887
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8071 mas, bmaj=2.065 mas, bpa=-19.23 degrees
! Estimated noise=0.958205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.086939 Jy
! Component: 100  -  total flux cleaned = 0.112551 Jy
! Total flux subtracted in 100 components = 0.112551 Jy
! Clean residual min=-0.005134 max=0.010602 Jy/beam
! Clean residual mean=-0.000004 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 0.112551 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.112551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064866Jy  sigma=0.590782
! Fit after  self-cal, rms=0.064753Jy  sigma=0.589853
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121198 Jy
! Component: 100  -  total flux cleaned = 0.018998 Jy
! Total flux subtracted in 100 components = 0.018998 Jy
! Clean residual min=-0.005053 max=0.007601 Jy/beam
! Clean residual mean=-0.000006 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.131549 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.131549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061175Jy  sigma=0.554580
! Fit after  self-cal, rms=0.061129Jy  sigma=0.554154
! Inverting map 
! Added new window around map position (0, -7.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00797192 Jy
! Component: 100  -  total flux cleaned = 0.0133357 Jy
! Total flux subtracted in 100 components = 0.0133357 Jy
! Clean residual min=-0.004509 max=0.004953 Jy/beam
! Clean residual mean=-0.000005 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.144885 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.144885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059164Jy  sigma=0.534551
! Fit after  self-cal, rms=0.059115Jy  sigma=0.534087
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=2.312 mas, bpa=-17.62 degrees
! Estimated noise=0.472424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103723 Jy
! Component: 100  -  total flux cleaned = 0.0183044 Jy
! Component: 150  -  total flux cleaned = 0.0248525 Jy
! Component: 200  -  total flux cleaned = 0.0303248 Jy
! Total flux subtracted in 200 components = 0.0303248 Jy
! Clean residual min=-0.004811 max=0.006795 Jy/beam
! Clean residual mean=-0.000011 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.17521 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 84 components and 0.17521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056298Jy  sigma=0.506180
! Fit after  self-cal, rms=0.056178Jy  sigma=0.504741
! Inverting map 
! Added new window around map position (-1.6, -8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00687823 Jy
! Component: 100  -  total flux cleaned = 0.0118071 Jy
! Component: 150  -  total flux cleaned = 0.0160337 Jy
! Component: 200  -  total flux cleaned = 0.019743 Jy
! Total flux subtracted in 200 components = 0.019743 Jy
! Clean residual min=-0.003858 max=0.003818 Jy/beam
! Clean residual mean=-0.000007 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.194953 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 129 components and 0.194953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054940Jy  sigma=0.492115
! Fit after  self-cal, rms=0.054885Jy  sigma=0.491530
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 2.312 at -17.62 degrees (North through East)
! Clean map  min=-0.0036845  max=0.11755 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.96     KP        1.04     
!   LA        1.00     MK        1.05     NL        1.11     OV        0.93     
!   PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.98     KP        1.03     
!   LA        1.01     MK        1.08     NL        1.10     OV        0.91     
!   PT        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.99     KP        1.03     
!   LA        0.99     MK        1.06     NL        1.11     OV        0.93     
!   PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.01     KP        1.03     
!   LA        1.02     MK        1.05     NL        1.10     OV        0.92     
!   PT        0.87     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.01     KP        1.03     
!   LA        0.98     MK        1.09     NL        1.09     OV        0.91     
!   PT        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.97     MK        1.07     NL        1.10     OV        0.93     
!   PT        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        1.05     
!   LA        0.99     MK        1.08     NL        1.11     OV        0.92     
!   PT        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.04     NL        1.07     OV        0.92     
!   PT        0.90     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.01     
!   LA        1.00     MK        1.04     NL        1.10     OV        0.93     
!   PT        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.97     KP        1.03     
!   LA        0.99     MK        1.09     NL        1.12     OV        0.91     
!   PT        0.89     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.95     KP        1.04     
!   LA        1.01     MK        1.05     NL        1.09     OV        0.91     
!   PT        0.85     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.02     MK        1.03     NL        1.10     OV        0.92     
!   PT        0.88     
! 
! 
! Fit before self-cal, rms=0.054885Jy  sigma=0.491530
! Fit after  self-cal, rms=0.052421Jy  sigma=0.479105
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.324 mas, bpa=-17.41 degrees
! Estimated noise=0.464451 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00350462 Jy
! Component: 100  -  total flux cleaned = 0.0059552 Jy
! Component: 150  -  total flux cleaned = 0.00783471 Jy
! Component: 200  -  total flux cleaned = 0.00927459 Jy
! Total flux subtracted in 200 components = 0.00927459 Jy
! Clean residual min=-0.001344 max=0.001456 Jy/beam
! Clean residual mean=-0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.204228 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 159 components and 0.204228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052124Jy  sigma=0.475865
! Fit after  self-cal, rms=0.052115Jy  sigma=0.475609
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052115Jy  sigma=0.475609
! Fit after  self-cal, rms=0.052381Jy  sigma=0.474074
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=2.327 mas, bpa=-17.53 degrees
! Estimated noise=0.464613 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147906 Jy
! Component: 100  -  total flux cleaned = 0.00233023 Jy
! Component: 150  -  total flux cleaned = 0.00296722 Jy
! Component: 200  -  total flux cleaned = 0.00341295 Jy
! Total flux subtracted in 200 components = 0.00341295 Jy
! Clean residual min=-0.001173 max=0.001231 Jy/beam
! Clean residual mean=0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.20764 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 184 components and 0.20764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052320Jy  sigma=0.473403
! Fit after  self-cal, rms=0.052326Jy  sigma=0.473357
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000503022 Jy
! Component: 100  -  total flux cleaned = 0.000820025 Jy
! Component: 150  -  total flux cleaned = 0.0010275 Jy
! Component: 200  -  total flux cleaned = 0.00121083 Jy
! Total flux subtracted in 200 components = 0.00121083 Jy
! Clean residual min=-0.001136 max=0.001163 Jy/beam
! Clean residual mean=0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.208851 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 200 components and 0.208851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052305Jy  sigma=0.473144
! Fit after  self-cal, rms=0.052303Jy  sigma=0.473133
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052303Jy  sigma=0.473133
! Fit after  self-cal, rms=0.052337Jy  sigma=0.473059
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.326 mas, bpa=-17.56 degrees
! Estimated noise=0.464374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000320098 Jy
! Component: 100  -  total flux cleaned = 0.000555134 Jy
! Component: 150  -  total flux cleaned = 0.000760082 Jy
! Component: 200  -  total flux cleaned = 0.000862288 Jy
! Total flux subtracted in 200 components = 0.000862288 Jy
! Clean residual min=-0.001127 max=0.001154 Jy/beam
! Clean residual mean=0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.209714 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 213 components and 0.209714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052323Jy  sigma=0.472903
! Fit after  self-cal, rms=0.052325Jy  sigma=0.472896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, -11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122008 Jy
! Component: 100  -  total flux cleaned = 0.00201221 Jy
! Component: 150  -  total flux cleaned = 0.00258683 Jy
! Component: 200  -  total flux cleaned = 0.00295683 Jy
! Total flux subtracted in 200 components = 0.00295683 Jy
! Clean residual min=-0.001068 max=0.001067 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.21267 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 236 components and 0.21267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052291Jy  sigma=0.472511
! Fit after  self-cal, rms=0.052287Jy  sigma=0.472485
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052287Jy  sigma=0.472485
! Fit after  self-cal, rms=0.052276Jy  sigma=0.472455
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.269 mas, bmaj=2.858 mas, bpa=-8.714 degrees
! Estimated noise=0.536663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862792 Jy
! Component: 100  -  total flux cleaned = 0.00138802 Jy
! Component: 150  -  total flux cleaned = 0.00186753 Jy
! Component: 200  -  total flux cleaned = 0.00223479 Jy
! Total flux subtracted in 200 components = 0.00223479 Jy
! Clean residual min=-0.000890 max=0.001060 Jy/beam
! Clean residual mean=0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.214905 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 257 components and 0.214905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052267Jy  sigma=0.472314
! Fit after  self-cal, rms=0.052263Jy  sigma=0.472299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426197 Jy
! Component: 100  -  total flux cleaned = 0.000785251 Jy
! Component: 150  -  total flux cleaned = 0.00104221 Jy
! Component: 200  -  total flux cleaned = 0.00124552 Jy
! Total flux subtracted in 200 components = 0.00124552 Jy
! Clean residual min=-0.000864 max=0.001006 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.216151 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 265 components and 0.216151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052260Jy  sigma=0.472247
! Fit after  self-cal, rms=0.052258Jy  sigma=0.472243
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.325 mas, bpa=-17.58 degrees
! Estimated noise=0.464022 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.325 at -17.58 degrees (North through East)
! Clean map  min=-0.00085423  max=0.11585 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8206 mas, bmaj=2.076 mas, bpa=-19.3 degrees
! Estimated noise=0.95492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0865576 Jy
! Component: 100  -  total flux cleaned = 0.112944 Jy
! Component: 150  -  total flux cleaned = 0.125048 Jy
! Component: 200  -  total flux cleaned = 0.133498 Jy
! Total flux subtracted in 200 components = 0.133498 Jy
! Clean residual min=-0.003570 max=0.005077 Jy/beam
! Clean residual mean=-0.000004 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.133498 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.133498 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.325 mas, bpa=-17.58 degrees
! Estimated noise=0.464022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123426 Jy
! Component: 100  -  total flux cleaned = 0.021773 Jy
! Component: 150  -  total flux cleaned = 0.0293875 Jy
! Component: 200  -  total flux cleaned = 0.0356746 Jy
! Total flux subtracted in 200 components = 0.0356746 Jy
! Clean residual min=-0.002751 max=0.003826 Jy/beam
! Clean residual mean=-0.000006 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.169173 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 97 components and 0.169173 Jy
! Inverting map 
! Added new window around map position (1.2, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0052791 Jy
! Component: 100  -  total flux cleaned = 0.00975149 Jy
! Component: 150  -  total flux cleaned = 0.0135757 Jy
! Component: 200  -  total flux cleaned = 0.016856 Jy
! Total flux subtracted in 200 components = 0.016856 Jy
! Clean residual min=-0.001868 max=0.002024 Jy/beam
! Clean residual mean=-0.000003 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.186029 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 150 components and 0.186029 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.269 mas, bmaj=2.858 mas, bpa=-8.714 degrees
! Estimated noise=0.536663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464005 Jy
! Component: 100  -  total flux cleaned = 0.00817295 Jy
! Component: 150  -  total flux cleaned = 0.0110111 Jy
! Component: 200  -  total flux cleaned = 0.0133905 Jy
! Total flux subtracted in 200 components = 0.0133905 Jy
! Clean residual min=-0.001611 max=0.001683 Jy/beam
! Clean residual mean=-0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.199419 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203487 Jy
! Component: 100  -  total flux cleaned = 0.00380183 Jy
! Component: 150  -  total flux cleaned = 0.00534894 Jy
! Component: 200  -  total flux cleaned = 0.00671254 Jy
! Total flux subtracted in 200 components = 0.00671254 Jy
! Clean residual min=-0.001221 max=0.001312 Jy/beam
! Clean residual mean=-0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.206132 Jy
! Adding 151 model components to the UV plane model.
! The established model now contains 271 components and 0.206132 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.325 mas, bpa=-17.58 degrees
! Estimated noise=0.464022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112936 Jy
! Component: 100  -  total flux cleaned = 0.00207057 Jy
! Component: 150  -  total flux cleaned = 0.00290703 Jy
! Component: 200  -  total flux cleaned = 0.00366238 Jy
! Total flux subtracted in 200 components = 0.00366238 Jy
! Clean residual min=-0.000953 max=0.000956 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.209794 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 307 components and 0.209794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052298Jy  sigma=0.472650
! Fit after  self-cal, rms=0.052286Jy  sigma=0.472539
wmodel J0356+2903_X_map.mod
! Writing 307 model components to file: J0356+2903_X_map.mod
wobs   J0356+2903_X_uvs.fits
! Writing UV FITS file: J0356+2903_X_uvs.fits
wwins  J0356+2903_X_map.win
! wwins: Wrote 6 windows to J0356+2903_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.54724e-05 Jy
! Component: 100  -  total flux cleaned = -1.49281e-05 Jy
! Component: 150  -  total flux cleaned = 6.51274e-05 Jy
! Component: 200  -  total flux cleaned = 0.000142377 Jy
! Component: 250  -  total flux cleaned = 0.000142339 Jy
! Component: 300  -  total flux cleaned = 0.000157193 Jy
! Component: 350  -  total flux cleaned = 0.000128498 Jy
! Component: 400  -  total flux cleaned = 0.0001422 Jy
! Component: 450  -  total flux cleaned = 0.000101237 Jy
! Component: 500  -  total flux cleaned = 0.000114829 Jy
! Component: 550  -  total flux cleaned = 8.8513e-05 Jy
! Component: 600  -  total flux cleaned = 6.27737e-05 Jy
! Component: 650  -  total flux cleaned = 8.81123e-05 Jy
! Component: 700  -  total flux cleaned = 4.99308e-05 Jy
! Component: 750  -  total flux cleaned = 7.45815e-05 Jy
! Component: 800  -  total flux cleaned = 3.78865e-05 Jy
! Component: 850  -  total flux cleaned = 3.80176e-05 Jy
! Component: 900  -  total flux cleaned = 8.5449e-05 Jy
! Component: 950  -  total flux cleaned = 8.51817e-05 Jy
! Component: 1000  -  total flux cleaned = 9.66628e-05 Jy
! Component: 1050  -  total flux cleaned = 9.63869e-05 Jy
! Component: 1100  -  total flux cleaned = 5.15786e-05 Jy
! Component: 1150  -  total flux cleaned = 6.2851e-05 Jy
! Component: 1200  -  total flux cleaned = 5.18894e-05 Jy
! Component: 1250  -  total flux cleaned = 4.09957e-05 Jy
! Component: 1300  -  total flux cleaned = 5.1627e-05 Jy
! Component: 1350  -  total flux cleaned = 7.26773e-05 Jy
! Component: 1400  -  total flux cleaned = 6.19644e-05 Jy
! Component: 1450  -  total flux cleaned = 4.12253e-05 Jy
! Component: 1500  -  total flux cleaned = 5.15153e-05 Jy
! Component: 1550  -  total flux cleaned = 9.21151e-05 Jy
! Component: 1600  -  total flux cleaned = -8.82355e-06 Jy
! Component: 1650  -  total flux cleaned = 2.13308e-05 Jy
! Component: 1700  -  total flux cleaned = 5.10341e-05 Jy
! Component: 1750  -  total flux cleaned = 6.09442e-05 Jy
! Component: 1800  -  total flux cleaned = 6.09062e-05 Jy
! Component: 1850  -  total flux cleaned = 7.06672e-05 Jy
! Component: 1900  -  total flux cleaned = 9.91585e-05 Jy
! Component: 1950  -  total flux cleaned = 6.13744e-05 Jy
! Component: 2000  -  total flux cleaned = 4.28951e-05 Jy
! Component: 2050  -  total flux cleaned = 6.14557e-05 Jy
! Component: 2100  -  total flux cleaned = 5.22855e-05 Jy
! Component: 2150  -  total flux cleaned = 7.05037e-05 Jy
! Component: 2200  -  total flux cleaned = 6.14572e-05 Jy
! Component: 2250  -  total flux cleaned = 7.02854e-05 Jy
! Component: 2300  -  total flux cleaned = 5.26546e-05 Jy
! Component: 2350  -  total flux cleaned = 7.02297e-05 Jy
! Component: 2400  -  total flux cleaned = 5.26468e-05 Jy
! Component: 2450  -  total flux cleaned = 3.5268e-05 Jy
! Component: 2500  -  total flux cleaned = 7.81967e-05 Jy
! Component: 2550  -  total flux cleaned = 6.96609e-05 Jy
! Component: 2600  -  total flux cleaned = 0.000137297 Jy
! Component: 2650  -  total flux cleaned = 0.000137361 Jy
! Component: 2700  -  total flux cleaned = 0.000145638 Jy
! Component: 2750  -  total flux cleaned = 0.000162247 Jy
! Component: 2800  -  total flux cleaned = 0.000203269 Jy
! Component: 2850  -  total flux cleaned = 0.000178861 Jy
! Component: 2900  -  total flux cleaned = 0.000203248 Jy
! Component: 2950  -  total flux cleaned = 0.000235383 Jy
! Component: 3000  -  total flux cleaned = 0.000227278 Jy
! Component: 3050  -  total flux cleaned = 0.000195562 Jy
! Component: 3100  -  total flux cleaned = 0.000266572 Jy
! Component: 3150  -  total flux cleaned = 0.000274387 Jy
! Component: 3200  -  total flux cleaned = 0.000274464 Jy
! Component: 3250  -  total flux cleaned = 0.000313117 Jy
! Component: 3300  -  total flux cleaned = 0.000313161 Jy
! Component: 3350  -  total flux cleaned = 0.000328411 Jy
! Component: 3400  -  total flux cleaned = 0.000388986 Jy
! Component: 3450  -  total flux cleaned = 0.000389014 Jy
! Component: 3500  -  total flux cleaned = 0.000403848 Jy
! Component: 3550  -  total flux cleaned = 0.000366671 Jy
! Component: 3600  -  total flux cleaned = 0.00039626 Jy
! Component: 3650  -  total flux cleaned = 0.000410902 Jy
! Component: 3700  -  total flux cleaned = 0.000447366 Jy
! Component: 3750  -  total flux cleaned = 0.000461888 Jy
! Component: 3800  -  total flux cleaned = 0.000440264 Jy
! Component: 3850  -  total flux cleaned = 0.000476135 Jy
! Component: 3900  -  total flux cleaned = 0.000525864 Jy
! Component: 3950  -  total flux cleaned = 0.000518829 Jy
! Component: 4000  -  total flux cleaned = 0.000567985 Jy
! Component: 4050  -  total flux cleaned = 0.00053996 Jy
! Total flux subtracted in 4096 components = 0.000567825 Jy
! Clean residual min=-0.000471 max=0.000385 Jy/beam
! Clean residual mean=0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.210362 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 620 components and 0.210362 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0356+2903_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.325 at -17.58 degrees (North through East)
! Clean map  min=-0.00065374  max=0.11626 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0356+2903_X_map.fits
wmodel /image_prod/ug002_uva//J0356+2903_X_map.mod
! Writing 620 model components to file: /image_prod/ug002_uva//J0356+2903_X_map.mod
wobs   /image_prod/ug002_uva//J0356+2903_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0356+2903_X_uvs.fits
wwins  /image_prod/ug002_uva//J0356+2903_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0356+2903_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.116265 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125265 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.323222 0.323222 0.646444 1.29289 2.58578 5.17155 10.3431 20.6862 41.3724 82.7448
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  928.154 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0356+2903_X_dfm.log closed on Wed Mar  4 20:06:03 2020