! Started logfile: /image_prod/ug002_uva//J0355+3909_X_a_dfm.log on Wed Mar 4 20:05:36 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0355+3909_X_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0355+3909_X_a_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.978148 visibilities/baseline/integration-bin. ! Found source: J0355+3909 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31692 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0355+3909_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011896Jy sigma=8.714446 ! Fit after self-cal, rms=0.884657Jy sigma=7.575971 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7249 mas, bmaj=1.315 mas, bpa=-1.215 degrees ! Estimated noise=0.941659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882854 Jy ! Component: 100 - total flux cleaned = 0.117813 Jy ! Total flux subtracted in 100 components = 0.117813 Jy ! Clean residual min=-0.005334 max=0.012424 Jy/beam ! Clean residual mean=0.000003 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.117813 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.117813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065350Jy sigma=0.535308 ! Fit after self-cal, rms=0.065213Jy sigma=0.534225 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013321 Jy ! Component: 100 - total flux cleaned = 0.0192891 Jy ! Total flux subtracted in 100 components = 0.0192891 Jy ! Clean residual min=-0.004580 max=0.007346 Jy/beam ! Clean residual mean=0.000002 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.137102 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.137102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062925Jy sigma=0.508570 ! Fit after self-cal, rms=0.062913Jy sigma=0.508448 ! Inverting map ! Added new window around map position (1.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676557 Jy ! Component: 100 - total flux cleaned = 0.0097312 Jy ! Total flux subtracted in 100 components = 0.0097312 Jy ! Clean residual min=-0.004293 max=0.004961 Jy/beam ! Clean residual mean=0.000001 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.146833 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.146833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061904Jy sigma=0.500418 ! Fit after self-cal, rms=0.061819Jy sigma=0.499407 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9318 mas, bmaj=1.615 mas, bpa=-0.4194 degrees ! Estimated noise=0.468608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612176 Jy ! Component: 100 - total flux cleaned = 0.00900569 Jy ! Component: 150 - total flux cleaned = 0.00975979 Jy ! Component: 200 - total flux cleaned = 0.0100869 Jy ! Total flux subtracted in 200 components = 0.0100869 Jy ! Clean residual min=-0.003241 max=0.003586 Jy/beam ! Clean residual mean=0.000001 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.15692 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.15692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060926Jy sigma=0.493354 ! Fit after self-cal, rms=0.060918Jy sigma=0.493216 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9318 x 1.615 at -0.4194 degrees (North through East) ! Clean map min=-0.0030081 max=0.11432 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.95 KP 1.11 ! LA 0.97 MK 1.08 NL 1.21 OV 1.00 ! PT 0.90 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.95 KP 1.09 ! LA 1.00 MK 1.03 NL 1.19 OV 1.02 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.96 KP 1.07 ! LA 0.97 MK 1.01 NL 1.17 OV 1.05 ! PT 0.91 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.94 KP 1.08 ! LA 0.99 MK 1.03 NL 1.16 OV 1.01 ! PT 0.89 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.98 KP 1.09 ! LA 1.00 MK 1.03 NL 1.18 OV 1.03 ! PT 0.90 SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 1.10 ! LA 0.97 MK 1.03 NL 1.24 OV 0.98 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.99 KP 1.07 ! LA 0.98 MK 1.07 NL 1.20 OV 1.00 ! PT 0.90 SC 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.93 KP 1.10 ! LA 0.99 MK 1.04 NL 1.19 OV 1.00 ! PT 0.88 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.98 KP 1.10 ! LA 0.97 MK 1.05 NL 1.18 OV 1.01 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.00 KP 1.06 ! LA 0.98 MK 1.04 NL 1.23 OV 1.01 ! PT 0.90 SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.97 KP 1.08 ! LA 0.99 MK 1.09 NL 1.17 OV 1.03 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.99 KP 1.09 ! LA 0.99 MK 1.00 NL 1.18 OV 1.02 ! PT 0.89 SC 0.94 ! ! ! Fit before self-cal, rms=0.060918Jy sigma=0.493216 ! Fit after self-cal, rms=0.059472Jy sigma=0.482006 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9295 mas, bmaj=1.604 mas, bpa=0.6215 degrees ! Estimated noise=0.468609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204762 Jy ! Component: 100 - total flux cleaned = -0.00258233 Jy ! Component: 150 - total flux cleaned = -0.00282805 Jy ! Component: 200 - total flux cleaned = -0.00308675 Jy ! Total flux subtracted in 200 components = -0.00308675 Jy ! Clean residual min=-0.001918 max=0.002367 Jy/beam ! Clean residual mean=0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.153833 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.153833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059391Jy sigma=0.480946 ! Fit after self-cal, rms=0.059414Jy sigma=0.480814 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059414Jy sigma=0.480814 ! Fit after self-cal, rms=0.062045Jy sigma=0.475315 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9285 mas, bmaj=1.591 mas, bpa=0.9366 degrees ! Estimated noise=0.470763 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153161 Jy ! Component: 100 - total flux cleaned = -0.00192604 Jy ! Component: 150 - total flux cleaned = -0.00216071 Jy ! Component: 200 - total flux cleaned = -0.00239061 Jy ! Total flux subtracted in 200 components = -0.00239061 Jy ! Clean residual min=-0.001310 max=0.001931 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.151443 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.151443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061976Jy sigma=0.474597 ! Fit after self-cal, rms=0.062027Jy sigma=0.474536 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019307 Jy ! Component: 100 - total flux cleaned = 0.00288866 Jy ! Component: 150 - total flux cleaned = 0.00339026 Jy ! Component: 200 - total flux cleaned = 0.00378925 Jy ! Total flux subtracted in 200 components = 0.00378925 Jy ! Clean residual min=-0.001113 max=0.001293 Jy/beam ! Clean residual mean=0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.155232 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.155232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061964Jy sigma=0.473847 ! Fit after self-cal, rms=0.061959Jy sigma=0.473803 ! Inverting map ! Added new window around map position (-4.6, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001088 Jy ! Component: 100 - total flux cleaned = 0.00150125 Jy ! Component: 150 - total flux cleaned = 0.00172294 Jy ! Component: 200 - total flux cleaned = 0.00188299 Jy ! Total flux subtracted in 200 components = 0.00188299 Jy ! Clean residual min=-0.001062 max=0.001174 Jy/beam ! Clean residual mean=0.000001 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.157115 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 0.157115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061936Jy sigma=0.473526 ! Fit after self-cal, rms=0.061934Jy sigma=0.473512 ! Inverting map ! Added new window around map position (10, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568833 Jy ! Component: 100 - total flux cleaned = 0.000543143 Jy ! Component: 150 - total flux cleaned = 0.000587174 Jy ! Component: 200 - total flux cleaned = 0.000690293 Jy ! Total flux subtracted in 200 components = 0.000690293 Jy ! Clean residual min=-0.001012 max=0.001139 Jy/beam ! Clean residual mean=0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.157805 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 135 components and 0.157805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061909Jy sigma=0.473294 ! Fit after self-cal, rms=0.061910Jy sigma=0.473284 ! Inverting map ! Added new window around map position (3.2, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109695 Jy ! Component: 100 - total flux cleaned = 0.00132704 Jy ! Component: 150 - total flux cleaned = 0.00137044 Jy ! Component: 200 - total flux cleaned = 0.00139029 Jy ! Total flux subtracted in 200 components = 0.00139029 Jy ! Clean residual min=-0.000993 max=0.001083 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.159196 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.159196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061885Jy sigma=0.473062 ! Fit after self-cal, rms=0.061884Jy sigma=0.473052 ! Inverting map ! Added new window around map position (-11.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681207 Jy ! Component: 100 - total flux cleaned = 0.000683233 Jy ! Component: 150 - total flux cleaned = 0.000683083 Jy ! Component: 200 - total flux cleaned = 0.000703086 Jy ! Total flux subtracted in 200 components = 0.000703086 Jy ! Clean residual min=-0.000976 max=0.001088 Jy/beam ! Clean residual mean=0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.159899 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 163 components and 0.159899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061866Jy sigma=0.472868 ! Fit after self-cal, rms=0.061865Jy sigma=0.472860 ! Inverting map ! Added new window around map position (35.4, -32.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483741 Jy ! Component: 100 - total flux cleaned = 0.000705294 Jy ! Component: 150 - total flux cleaned = 0.000803303 Jy ! Component: 200 - total flux cleaned = 0.000785187 Jy ! Total flux subtracted in 200 components = 0.000785187 Jy ! Clean residual min=-0.000925 max=0.000999 Jy/beam ! Clean residual mean=0.000001 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.160684 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 175 components and 0.160684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061846Jy sigma=0.472686 ! Fit after self-cal, rms=0.061845Jy sigma=0.472677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061845Jy sigma=0.472677 ! Fit after self-cal, rms=0.062415Jy sigma=0.472501 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9273 mas, bmaj=1.594 mas, bpa=1.13 degrees ! Estimated noise=0.470757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524353 Jy ! Component: 100 - total flux cleaned = -0.000381201 Jy ! Component: 150 - total flux cleaned = -0.000232411 Jy ! Component: 200 - total flux cleaned = -7.80491e-05 Jy ! Total flux subtracted in 200 components = -7.80491e-05 Jy ! Clean residual min=-0.000863 max=0.000879 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.160606 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 186 components and 0.160606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062398Jy sigma=0.472344 ! Fit after self-cal, rms=0.062401Jy sigma=0.472340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149082 Jy ! Component: 100 - total flux cleaned = 0.000234903 Jy ! Component: 150 - total flux cleaned = 0.000283605 Jy ! Component: 200 - total flux cleaned = 0.000345432 Jy ! Total flux subtracted in 200 components = 0.000345432 Jy ! Clean residual min=-0.000858 max=0.000851 Jy/beam ! Clean residual mean=0.000001 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.160951 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 196 components and 0.160951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062394Jy sigma=0.472268 ! Fit after self-cal, rms=0.062394Jy sigma=0.472266 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062394Jy sigma=0.472266 ! Fit after self-cal, rms=0.062629Jy sigma=0.472240 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.145 mas, bmaj=2.626 mas, bpa=7.74 degrees ! Estimated noise=0.597064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03694e-05 Jy ! Component: 100 - total flux cleaned = -0.000116581 Jy ! Component: 150 - total flux cleaned = -0.000165648 Jy ! Component: 200 - total flux cleaned = -0.000195152 Jy ! Total flux subtracted in 200 components = -0.000195152 Jy ! Clean residual min=-0.000945 max=0.000990 Jy/beam ! Clean residual mean=0.000003 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.160756 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 210 components and 0.160756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062623Jy sigma=0.472191 ! Fit after self-cal, rms=0.062624Jy sigma=0.472188 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.16473e-05 Jy ! Component: 100 - total flux cleaned = 2.42471e-05 Jy ! Component: 150 - total flux cleaned = 1.21134e-05 Jy ! Component: 200 - total flux cleaned = -1.97676e-05 Jy ! Total flux subtracted in 200 components = -1.97676e-05 Jy ! Clean residual min=-0.000927 max=0.001007 Jy/beam ! Clean residual mean=0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.160736 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 217 components and 0.160736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062622Jy sigma=0.472172 ! Fit after self-cal, rms=0.062622Jy sigma=0.472171 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9267 mas, bmaj=1.596 mas, bpa=1.253 degrees ! Estimated noise=0.470788 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9267 x 1.596 at 1.253 degrees (North through East) ! Clean map min=-0.00139 max=0.11549 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7223 mas, bmaj=1.299 mas, bpa=0.3052 degrees ! Estimated noise=0.937968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0877178 Jy ! Component: 100 - total flux cleaned = 0.117318 Jy ! Component: 150 - total flux cleaned = 0.130071 Jy ! Component: 200 - total flux cleaned = 0.136925 Jy ! Total flux subtracted in 200 components = 0.136925 Jy ! Clean residual min=-0.002983 max=0.003396 Jy/beam ! Clean residual mean=0.000001 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.136925 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.136925 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9267 mas, bmaj=1.596 mas, bpa=1.253 degrees ! Estimated noise=0.470788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510661 Jy ! Component: 100 - total flux cleaned = 0.00823492 Jy ! Component: 150 - total flux cleaned = 0.0106177 Jy ! Component: 200 - total flux cleaned = 0.0123981 Jy ! Total flux subtracted in 200 components = 0.0123981 Jy ! Clean residual min=-0.001235 max=0.001663 Jy/beam ! Clean residual mean=0.000001 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.149323 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.149323 Jy ! Inverting map ! Added new window around map position (3, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173153 Jy ! Component: 100 - total flux cleaned = 0.00300163 Jy ! Component: 150 - total flux cleaned = 0.0041423 Jy ! Component: 200 - total flux cleaned = 0.00521919 Jy ! Total flux subtracted in 200 components = 0.00521919 Jy ! Clean residual min=-0.001064 max=0.001079 Jy/beam ! Clean residual mean=0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.154542 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 72 components and 0.154542 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.145 mas, bmaj=2.626 mas, bpa=7.74 degrees ! Estimated noise=0.597064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173765 Jy ! Component: 100 - total flux cleaned = 0.00248556 Jy ! Component: 150 - total flux cleaned = 0.00301008 Jy ! Component: 200 - total flux cleaned = 0.00350244 Jy ! Total flux subtracted in 200 components = 0.00350244 Jy ! Clean residual min=-0.001165 max=0.001065 Jy/beam ! Clean residual mean=0.000003 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.158044 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311896 Jy ! Component: 100 - total flux cleaned = 0.000592071 Jy ! Component: 150 - total flux cleaned = 0.000869616 Jy ! Component: 200 - total flux cleaned = 0.0011441 Jy ! Total flux subtracted in 200 components = 0.0011441 Jy ! Clean residual min=-0.001049 max=0.001018 Jy/beam ! Clean residual mean=0.000003 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.159188 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 129 components and 0.159188 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9267 mas, bmaj=1.596 mas, bpa=1.253 degrees ! Estimated noise=0.470788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339155 Jy ! Component: 100 - total flux cleaned = 0.000670627 Jy ! Component: 150 - total flux cleaned = 0.000889168 Jy ! Component: 200 - total flux cleaned = 0.00111355 Jy ! Total flux subtracted in 200 components = 0.00111355 Jy ! Clean residual min=-0.000921 max=0.000933 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.160302 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 146 components and 0.160302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062659Jy sigma=0.472472 ! Fit after self-cal, rms=0.062650Jy sigma=0.472433 wmodel J0355+3909_X_a_map.mod ! Writing 146 model components to file: J0355+3909_X_a_map.mod wobs J0355+3909_X_a_uvs.fits ! Writing UV FITS file: J0355+3909_X_a_uvs.fits wwins J0355+3909_X_a_map.win ! wwins: Wrote 10 windows to J0355+3909_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.01894e-05 Jy ! Component: 100 - total flux cleaned = 0.000173654 Jy ! Component: 150 - total flux cleaned = 0.000173505 Jy ! Component: 200 - total flux cleaned = 0.000173171 Jy ! Component: 250 - total flux cleaned = 0.000173063 Jy ! Component: 300 - total flux cleaned = 0.000159349 Jy ! Component: 350 - total flux cleaned = 0.000199959 Jy ! Component: 400 - total flux cleaned = 0.000226223 Jy ! Component: 450 - total flux cleaned = 0.000265485 Jy ! Component: 500 - total flux cleaned = 0.000343073 Jy ! Component: 550 - total flux cleaned = 0.000342666 Jy ! Component: 600 - total flux cleaned = 0.000368027 Jy ! Component: 650 - total flux cleaned = 0.00040546 Jy ! Component: 700 - total flux cleaned = 0.000442486 Jy ! Component: 750 - total flux cleaned = 0.00055198 Jy ! Component: 800 - total flux cleaned = 0.000588 Jy ! Component: 850 - total flux cleaned = 0.000623691 Jy ! Component: 900 - total flux cleaned = 0.000670859 Jy ! Component: 950 - total flux cleaned = 0.000728936 Jy ! Component: 1000 - total flux cleaned = 0.000751879 Jy ! Component: 1050 - total flux cleaned = 0.000786211 Jy ! Component: 1100 - total flux cleaned = 0.000797586 Jy ! Component: 1150 - total flux cleaned = 0.000909723 Jy ! Component: 1200 - total flux cleaned = 0.000920673 Jy ! Component: 1250 - total flux cleaned = 0.000975836 Jy ! Component: 1300 - total flux cleaned = 0.00104161 Jy ! Component: 1350 - total flux cleaned = 0.00110663 Jy ! Component: 1400 - total flux cleaned = 0.00120355 Jy ! Component: 1450 - total flux cleaned = 0.00127816 Jy ! Component: 1500 - total flux cleaned = 0.00136284 Jy ! Component: 1550 - total flux cleaned = 0.00143649 Jy ! Component: 1600 - total flux cleaned = 0.00148865 Jy ! Component: 1650 - total flux cleaned = 0.0015716 Jy ! Component: 1700 - total flux cleaned = 0.00165395 Jy ! Component: 1750 - total flux cleaned = 0.00167438 Jy ! Component: 1800 - total flux cleaned = 0.0017252 Jy ! Component: 1850 - total flux cleaned = 0.00182616 Jy ! Component: 1900 - total flux cleaned = 0.00185616 Jy ! Component: 1950 - total flux cleaned = 0.00192588 Jy ! Component: 2000 - total flux cleaned = 0.00199507 Jy ! Component: 2050 - total flux cleaned = 0.00204429 Jy ! Component: 2100 - total flux cleaned = 0.00212252 Jy ! Component: 2150 - total flux cleaned = 0.00219047 Jy ! Component: 2200 - total flux cleaned = 0.00225795 Jy ! Component: 2250 - total flux cleaned = 0.00232508 Jy ! Component: 2300 - total flux cleaned = 0.00237279 Jy ! Component: 2350 - total flux cleaned = 0.00240114 Jy ! Component: 2400 - total flux cleaned = 0.00247654 Jy ! Component: 2450 - total flux cleaned = 0.00253282 Jy ! Component: 2500 - total flux cleaned = 0.00256086 Jy ! Component: 2550 - total flux cleaned = 0.00262563 Jy ! Component: 2600 - total flux cleaned = 0.00264405 Jy ! Component: 2650 - total flux cleaned = 0.0026991 Jy ! Component: 2700 - total flux cleaned = 0.00274468 Jy ! Component: 2750 - total flux cleaned = 0.00281723 Jy ! Component: 2800 - total flux cleaned = 0.00282626 Jy ! Component: 2850 - total flux cleaned = 0.00288013 Jy ! Component: 2900 - total flux cleaned = 0.00291585 Jy ! Component: 2950 - total flux cleaned = 0.00296914 Jy ! Component: 3000 - total flux cleaned = 0.00299565 Jy ! Component: 3050 - total flux cleaned = 0.00306603 Jy ! Component: 3100 - total flux cleaned = 0.00310103 Jy ! Component: 3150 - total flux cleaned = 0.00313581 Jy ! Component: 3200 - total flux cleaned = 0.00315306 Jy ! Component: 3250 - total flux cleaned = 0.00317031 Jy ! Component: 3300 - total flux cleaned = 0.00318747 Jy ! Component: 3350 - total flux cleaned = 0.00323019 Jy ! Component: 3400 - total flux cleaned = 0.00323878 Jy ! Component: 3450 - total flux cleaned = 0.00324719 Jy ! Component: 3500 - total flux cleaned = 0.0032725 Jy ! Component: 3550 - total flux cleaned = 0.00334806 Jy ! Component: 3600 - total flux cleaned = 0.00340655 Jy ! Component: 3650 - total flux cleaned = 0.00341489 Jy ! Component: 3700 - total flux cleaned = 0.00345637 Jy ! Component: 3750 - total flux cleaned = 0.00349765 Jy ! Component: 3800 - total flux cleaned = 0.00348947 Jy ! Component: 3850 - total flux cleaned = 0.00352214 Jy ! Component: 3900 - total flux cleaned = 0.00357103 Jy ! Component: 3950 - total flux cleaned = 0.00364397 Jy ! Component: 4000 - total flux cleaned = 0.00367636 Jy ! Component: 4050 - total flux cleaned = 0.00370849 Jy ! Total flux subtracted in 4096 components = 0.00376449 Jy ! Clean residual min=-0.000511 max=0.000509 Jy/beam ! Clean residual mean=0.000000 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.164067 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 477 components and 0.164067 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0355+3909_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9267 x 1.596 at 1.253 degrees (North through East) ! Clean map min=-0.0012263 max=0.11592 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0355+3909_X_a_map.fits wmodel /image_prod/ug002_uva//J0355+3909_X_a_map.mod ! Writing 477 model components to file: /image_prod/ug002_uva//J0355+3909_X_a_map.mod wobs /image_prod/ug002_uva//J0355+3909_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0355+3909_X_a_uvs.fits wwins /image_prod/ug002_uva//J0355+3909_X_a_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0355+3909_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.115921 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136107 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.35224 0.35224 0.70448 1.40896 2.81792 5.63584 11.2717 22.5434 45.0867 90.1734 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.115 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 851.692 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0355+3909_X_a_dfm.log closed on Wed Mar 4 20:05:42 2020