! Started logfile: /image_prod/ug002_uva//J0349+2104_S_dfm.log on Wed Mar  4 20:03:12 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0349+2104_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0349+2104_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.987778 visibilities/baseline/integration-bin.
! Found source: J0349+2104
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 8001 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0349+2104_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.040237Jy  sigma=8.531632
! Fit after  self-cal, rms=0.809357Jy  sigma=6.733527
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.425 mas, bmaj=9.77 mas, bpa=-19.8 degrees
! Estimated noise=1.39905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150143 Jy
! Component: 100  -  total flux cleaned = 0.185696 Jy
! Total flux subtracted in 100 components = 0.185696 Jy
! Clean residual min=-0.018837 max=0.064463 Jy/beam
! Clean residual mean=-0.000005 rms=0.006595 Jy/beam
! Combined flux in latest and established models = 0.185696 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.185696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124936Jy  sigma=1.003961
! Fit after  self-cal, rms=0.124878Jy  sigma=1.003607
! Inverting map 
! Added new window around map position (9, 26).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0584533 Jy
! Component: 100  -  total flux cleaned = 0.086683 Jy
! Total flux subtracted in 100 components = 0.086683 Jy
! Clean residual min=-0.013550 max=0.024251 Jy/beam
! Clean residual mean=-0.000015 rms=0.004126 Jy/beam
! Combined flux in latest and established models = 0.272379 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.272379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093155Jy  sigma=0.718537
! Fit after  self-cal, rms=0.087913Jy  sigma=0.676694
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232344 Jy
! Component: 100  -  total flux cleaned = 0.0377788 Jy
! Total flux subtracted in 100 components = 0.0377788 Jy
! Clean residual min=-0.010424 max=0.018183 Jy/beam
! Clean residual mean=0.000003 rms=0.002915 Jy/beam
! Combined flux in latest and established models = 0.310158 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 58 components and 0.310158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080152Jy  sigma=0.597231
! Fit after  self-cal, rms=0.079297Jy  sigma=0.591244
! Inverting map 
! Added new window around map position (17.5, 23.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170812 Jy
! Component: 100  -  total flux cleaned = 0.0281147 Jy
! Total flux subtracted in 100 components = 0.0281147 Jy
! Clean residual min=-0.008889 max=0.014083 Jy/beam
! Clean residual mean=-0.000001 rms=0.002271 Jy/beam
! Combined flux in latest and established models = 0.338272 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 86 components and 0.338272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074892Jy  sigma=0.545099
! Fit after  self-cal, rms=0.074518Jy  sigma=0.542072
! Inverting map 
! Added new window around map position (5, 11.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129698 Jy
! Component: 100  -  total flux cleaned = 0.0210755 Jy
! Total flux subtracted in 100 components = 0.0210755 Jy
! Clean residual min=-0.006736 max=0.007564 Jy/beam
! Clean residual mean=0.000008 rms=0.001832 Jy/beam
! Combined flux in latest and established models = 0.359348 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.359348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072198Jy  sigma=0.513903
! Fit after  self-cal, rms=0.072037Jy  sigma=0.512832
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.974 mas, bmaj=10.32 mas, bpa=-19.37 degrees
! Estimated noise=0.992584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00933826 Jy
! Component: 100  -  total flux cleaned = 0.015985 Jy
! Component: 150  -  total flux cleaned = 0.0212051 Jy
! Component: 200  -  total flux cleaned = 0.0244751 Jy
! Total flux subtracted in 200 components = 0.0244751 Jy
! Clean residual min=-0.006231 max=0.007045 Jy/beam
! Clean residual mean=0.000011 rms=0.001491 Jy/beam
! Combined flux in latest and established models = 0.383823 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 144 components and 0.383823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070403Jy  sigma=0.496255
! Fit after  self-cal, rms=0.070272Jy  sigma=0.495207
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.974 x 10.32 at -19.37 degrees (North through East)
! Clean map  min=-0.0062707  max=0.19421 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.04     KP        0.95     
!   LA        1.04     MK        1.04     NL        0.99     OV        1.00     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.07     KP        0.97     
!   LA        1.04     MK        1.01     NL        0.93     OV        0.88     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.00     HN        1.03     KP        0.96     
!   LA        1.06     MK        1.03     NL        0.92     OV        1.03     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.070272Jy  sigma=0.495207
! Fit after  self-cal, rms=0.065914Jy  sigma=0.481050
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.035 mas, bmaj=10.3 mas, bpa=-19.4 degrees
! Estimated noise=0.977077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00326586 Jy
! Component: 100  -  total flux cleaned = 0.00437411 Jy
! Component: 150  -  total flux cleaned = 0.00505011 Jy
! Component: 200  -  total flux cleaned = 0.00544813 Jy
! Total flux subtracted in 200 components = 0.00544813 Jy
! Clean residual min=-0.004541 max=0.006022 Jy/beam
! Clean residual mean=0.000014 rms=0.001161 Jy/beam
! Combined flux in latest and established models = 0.389271 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 168 components and 0.389271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065462Jy  sigma=0.476605
! Fit after  self-cal, rms=0.065433Jy  sigma=0.476331
! Inverting map 
! Added new window around map position (-17, -96.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0044269 Jy
! Component: 100  -  total flux cleaned = 0.00562158 Jy
! Component: 150  -  total flux cleaned = 0.00644878 Jy
! Component: 200  -  total flux cleaned = 0.00701087 Jy
! Total flux subtracted in 200 components = 0.00701087 Jy
! Clean residual min=-0.004275 max=0.004638 Jy/beam
! Clean residual mean=0.000012 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.396282 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 184 components and 0.396282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064959Jy  sigma=0.472198
! Fit after  self-cal, rms=0.064902Jy  sigma=0.471722
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064902Jy  sigma=0.471722
! Fit after  self-cal, rms=0.061457Jy  sigma=0.447545
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.035 mas, bmaj=10.33 mas, bpa=-18.99 degrees
! Estimated noise=0.977231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014222 Jy
! Component: 100  -  total flux cleaned = 0.00179537 Jy
! Component: 150  -  total flux cleaned = 0.00190668 Jy
! Component: 200  -  total flux cleaned = 0.00205567 Jy
! Total flux subtracted in 200 components = 0.00205567 Jy
! Clean residual min=-0.001894 max=0.001992 Jy/beam
! Clean residual mean=0.000004 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.398338 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 216 components and 0.398338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061318Jy  sigma=0.446155
! Fit after  self-cal, rms=0.061314Jy  sigma=0.446035
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160931 Jy
! Component: 100  -  total flux cleaned = 0.000204154 Jy
! Component: 150  -  total flux cleaned = 0.000163029 Jy
! Component: 200  -  total flux cleaned = 0.000125199 Jy
! Total flux subtracted in 200 components = 0.000125199 Jy
! Clean residual min=-0.001907 max=0.001877 Jy/beam
! Clean residual mean=0.000004 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.398463 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 235 components and 0.398463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061262Jy  sigma=0.445570
! Fit after  self-cal, rms=0.061261Jy  sigma=0.445559
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061261Jy  sigma=0.445559
! Fit after  self-cal, rms=0.061208Jy  sigma=0.445289
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.032 mas, bmaj=10.32 mas, bpa=-18.92 degrees
! Estimated noise=0.977707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000601106 Jy
! Component: 100  -  total flux cleaned = 0.00108544 Jy
! Component: 150  -  total flux cleaned = 0.00120437 Jy
! Component: 200  -  total flux cleaned = 0.00131676 Jy
! Total flux subtracted in 200 components = 0.00131676 Jy
! Clean residual min=-0.001872 max=0.001684 Jy/beam
! Clean residual mean=0.000004 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.39978 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 253 components and 0.39978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061156Jy  sigma=0.444801
! Fit after  self-cal, rms=0.061155Jy  sigma=0.444793
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.86151e-05 Jy
! Component: 100  -  total flux cleaned = 6.28083e-05 Jy
! Component: 150  -  total flux cleaned = 0.000127713 Jy
! Component: 200  -  total flux cleaned = 0.000158905 Jy
! Total flux subtracted in 200 components = 0.000158905 Jy
! Clean residual min=-0.001872 max=0.001643 Jy/beam
! Clean residual mean=0.000004 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.399939 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 271 components and 0.399938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061124Jy  sigma=0.444532
! Fit after  self-cal, rms=0.061123Jy  sigma=0.444528
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061123Jy  sigma=0.444528
! Fit after  self-cal, rms=0.061040Jy  sigma=0.444452
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.132 mas, bmaj=11.76 mas, bpa=-16.04 degrees
! Estimated noise=1.10368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142333 Jy
! Component: 100  -  total flux cleaned = 0.000109527 Jy
! Component: 150  -  total flux cleaned = 8.01148e-05 Jy
! Component: 200  -  total flux cleaned = 7.90037e-05 Jy
! Total flux subtracted in 200 components = 7.90037e-05 Jy
! Clean residual min=-0.001766 max=0.001787 Jy/beam
! Clean residual mean=0.000005 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.400017 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 312 components and 0.400017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061027Jy  sigma=0.444280
! Fit after  self-cal, rms=0.061025Jy  sigma=0.444270
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156008 Jy
! Component: 100  -  total flux cleaned = -0.000113127 Jy
! Component: 150  -  total flux cleaned = -0.000133165 Jy
! Component: 200  -  total flux cleaned = -0.000151601 Jy
! Total flux subtracted in 200 components = -0.000151601 Jy
! Clean residual min=-0.001740 max=0.001741 Jy/beam
! Clean residual mean=0.000005 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.399866 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 335 components and 0.399866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061020Jy  sigma=0.444199
! Fit after  self-cal, rms=0.061019Jy  sigma=0.444195
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.029 mas, bmaj=10.32 mas, bpa=-18.87 degrees
! Estimated noise=0.977863 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.029 x 10.32 at -18.87 degrees (North through East)
! Clean map  min=-0.0018093  max=0.1916 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=9.799 mas, bpa=-19.34 degrees
! Estimated noise=1.3862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155329 Jy
! Component: 100  -  total flux cleaned = 0.219342 Jy
! Component: 150  -  total flux cleaned = 0.257369 Jy
! Component: 200  -  total flux cleaned = 0.284067 Jy
! Total flux subtracted in 200 components = 0.284067 Jy
! Clean residual min=-0.008773 max=0.015081 Jy/beam
! Clean residual mean=-0.000006 rms=0.002717 Jy/beam
! Combined flux in latest and established models = 0.284066 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.284066 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.029 mas, bmaj=10.32 mas, bpa=-18.87 degrees
! Estimated noise=0.977863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254683 Jy
! Component: 100  -  total flux cleaned = 0.0437105 Jy
! Component: 150  -  total flux cleaned = 0.0576887 Jy
! Component: 200  -  total flux cleaned = 0.0685999 Jy
! Total flux subtracted in 200 components = 0.0685999 Jy
! Clean residual min=-0.004998 max=0.006448 Jy/beam
! Clean residual mean=0.000001 rms=0.001379 Jy/beam
! Combined flux in latest and established models = 0.352666 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 103 components and 0.352666 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00863592 Jy
! Component: 100  -  total flux cleaned = 0.0155753 Jy
! Component: 150  -  total flux cleaned = 0.0212067 Jy
! Component: 200  -  total flux cleaned = 0.0258069 Jy
! Total flux subtracted in 200 components = 0.0258069 Jy
! Clean residual min=-0.003242 max=0.003170 Jy/beam
! Clean residual mean=0.000003 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.378473 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 139 components and 0.378473 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.132 mas, bmaj=11.76 mas, bpa=-16.04 degrees
! Estimated noise=1.10368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00506403 Jy
! Component: 100  -  total flux cleaned = 0.00862965 Jy
! Component: 150  -  total flux cleaned = 0.0114236 Jy
! Component: 200  -  total flux cleaned = 0.0136795 Jy
! Total flux subtracted in 200 components = 0.0136795 Jy
! Clean residual min=-0.002159 max=0.002215 Jy/beam
! Clean residual mean=0.000005 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.392153 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184129 Jy
! Component: 100  -  total flux cleaned = 0.00335524 Jy
! Component: 150  -  total flux cleaned = 0.00437314 Jy
! Component: 200  -  total flux cleaned = 0.00519691 Jy
! Total flux subtracted in 200 components = 0.00519691 Jy
! Clean residual min=-0.001902 max=0.001970 Jy/beam
! Clean residual mean=0.000006 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.39735 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 244 components and 0.39735 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.029 mas, bmaj=10.32 mas, bpa=-18.87 degrees
! Estimated noise=0.977863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.21227e-05 Jy
! Component: 100  -  total flux cleaned = 0.000982288 Jy
! Component: 150  -  total flux cleaned = 0.00165005 Jy
! Component: 200  -  total flux cleaned = 0.00229103 Jy
! Total flux subtracted in 200 components = 0.00229103 Jy
! Clean residual min=-0.001910 max=0.001906 Jy/beam
! Clean residual mean=0.000005 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.399641 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 266 components and 0.399641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061122Jy  sigma=0.444907
! Fit after  self-cal, rms=0.061092Jy  sigma=0.444653
wmodel J0349+2104_S_map.mod
! Writing 266 model components to file: J0349+2104_S_map.mod
wobs   J0349+2104_S_uvs.fits
! Writing UV FITS file: J0349+2104_S_uvs.fits
wwins  J0349+2104_S_map.win
! wwins: Wrote 5 windows to J0349+2104_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476262 Jy
! Component: 100  -  total flux cleaned = 0.000475681 Jy
! Component: 150  -  total flux cleaned = 0.000445512 Jy
! Component: 200  -  total flux cleaned = 0.000472586 Jy
! Component: 250  -  total flux cleaned = 0.000552089 Jy
! Component: 300  -  total flux cleaned = 0.000680855 Jy
! Component: 350  -  total flux cleaned = 0.000705968 Jy
! Component: 400  -  total flux cleaned = 0.00077943 Jy
! Component: 450  -  total flux cleaned = 0.000897111 Jy
! Component: 500  -  total flux cleaned = 0.000919214 Jy
! Component: 550  -  total flux cleaned = 0.000851406 Jy
! Component: 600  -  total flux cleaned = 0.000851936 Jy
! Component: 650  -  total flux cleaned = 0.000808775 Jy
! Component: 700  -  total flux cleaned = 0.000787879 Jy
! Component: 750  -  total flux cleaned = 0.000788258 Jy
! Component: 800  -  total flux cleaned = 0.000808644 Jy
! Component: 850  -  total flux cleaned = 0.000727586 Jy
! Component: 900  -  total flux cleaned = 0.000687997 Jy
! Component: 950  -  total flux cleaned = 0.000590633 Jy
! Component: 1000  -  total flux cleaned = 0.000591751 Jy
! Component: 1050  -  total flux cleaned = 0.00059224 Jy
! Component: 1100  -  total flux cleaned = 0.000611152 Jy
! Component: 1150  -  total flux cleaned = 0.0006294 Jy
! Component: 1200  -  total flux cleaned = 0.000593044 Jy
! Component: 1250  -  total flux cleaned = 0.000574932 Jy
! Component: 1300  -  total flux cleaned = 0.000434572 Jy
! Component: 1350  -  total flux cleaned = 0.000469503 Jy
! Component: 1400  -  total flux cleaned = 0.000383934 Jy
! Component: 1450  -  total flux cleaned = 0.000383615 Jy
! Component: 1500  -  total flux cleaned = 0.000317191 Jy
! Component: 1550  -  total flux cleaned = 0.000268106 Jy
! Component: 1600  -  total flux cleaned = 0.000219666 Jy
! Component: 1650  -  total flux cleaned = 0.000155925 Jy
! Component: 1700  -  total flux cleaned = 0.00017179 Jy
! Component: 1750  -  total flux cleaned = 0.000124829 Jy
! Component: 1800  -  total flux cleaned = 0.000109207 Jy
! Component: 1850  -  total flux cleaned = 6.37454e-05 Jy
! Component: 1900  -  total flux cleaned = 9.37334e-05 Jy
! Component: 1950  -  total flux cleaned = 6.39975e-05 Jy
! Component: 2000  -  total flux cleaned = 3.45e-05 Jy
! Component: 2050  -  total flux cleaned = 2.02645e-05 Jy
! Component: 2100  -  total flux cleaned = 6.34488e-05 Jy
! Component: 2150  -  total flux cleaned = 6.69115e-06 Jy
! Component: 2200  -  total flux cleaned = -2.11053e-05 Jy
! Component: 2250  -  total flux cleaned = -7.01267e-06 Jy
! Component: 2300  -  total flux cleaned = -3.46267e-05 Jy
! Component: 2350  -  total flux cleaned = 6.29817e-06 Jy
! Component: 2400  -  total flux cleaned = 1.99286e-05 Jy
! Component: 2450  -  total flux cleaned = 6.00526e-05 Jy
! Component: 2500  -  total flux cleaned = 4.67801e-05 Jy
! Component: 2550  -  total flux cleaned = 9.94632e-05 Jy
! Component: 2600  -  total flux cleaned = 0.000112337 Jy
! Component: 2650  -  total flux cleaned = 0.00012505 Jy
! Component: 2700  -  total flux cleaned = 0.000150373 Jy
! Component: 2750  -  total flux cleaned = 0.000163044 Jy
! Component: 2800  -  total flux cleaned = 0.000187915 Jy
! Component: 2850  -  total flux cleaned = 0.000237679 Jy
! Component: 2900  -  total flux cleaned = 0.000213061 Jy
! Component: 2950  -  total flux cleaned = 0.000237604 Jy
! Component: 3000  -  total flux cleaned = 0.000273939 Jy
! Component: 3050  -  total flux cleaned = 0.000297887 Jy
! Component: 3100  -  total flux cleaned = 0.000286012 Jy
! Component: 3150  -  total flux cleaned = 0.000309516 Jy
! Component: 3200  -  total flux cleaned = 0.000356246 Jy
! Component: 3250  -  total flux cleaned = 0.000344684 Jy
! Component: 3300  -  total flux cleaned = 0.00034481 Jy
! Component: 3350  -  total flux cleaned = 0.000367784 Jy
! Component: 3400  -  total flux cleaned = 0.000401687 Jy
! Component: 3450  -  total flux cleaned = 0.000412957 Jy
! Component: 3500  -  total flux cleaned = 0.000446337 Jy
! Component: 3550  -  total flux cleaned = 0.000446376 Jy
! Component: 3600  -  total flux cleaned = 0.00051205 Jy
! Component: 3650  -  total flux cleaned = 0.000490295 Jy
! Component: 3700  -  total flux cleaned = 0.000565713 Jy
! Component: 3750  -  total flux cleaned = 0.000608472 Jy
! Component: 3800  -  total flux cleaned = 0.000565916 Jy
! Component: 3850  -  total flux cleaned = 0.000629144 Jy
! Component: 3900  -  total flux cleaned = 0.000660569 Jy
! Component: 3950  -  total flux cleaned = 0.000650149 Jy
! Component: 4000  -  total flux cleaned = 0.000691382 Jy
! Component: 4050  -  total flux cleaned = 0.000711765 Jy
! Total flux subtracted in 4096 components = 0.000681317 Jy
! Clean residual min=-0.000533 max=0.000559 Jy/beam
! Clean residual mean=0.000002 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.400322 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 570 components and 0.400322 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0349+2104_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.029 x 10.32 at -18.87 degrees (North through East)
! Clean map  min=-0.0011932  max=0.19048 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0349+2104_S_map.fits
wmodel /image_prod/ug002_uva//J0349+2104_S_map.mod
! Writing 570 model components to file: /image_prod/ug002_uva//J0349+2104_S_map.mod
wobs   /image_prod/ug002_uva//J0349+2104_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0349+2104_S_uvs.fits
wwins  /image_prod/ug002_uva//J0349+2104_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0349+2104_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.190483 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000196897 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.310102 0.310102 0.620205 1.24041 2.48082 4.96164 9.92327 19.8465 39.6931 79.3862
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.19 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  967.422 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0349+2104_S_dfm.log closed on Wed Mar  4 20:03:16 2020