! Started logfile: /image_prod/ug002_uva//J0347+2004_S_dfm.log on Wed Mar  4 20:02:12 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0347+2004_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0347+2004_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.974537 visibilities/baseline/integration-bin.
! Found source: J0347+2004
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6315 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0347+2004_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.079148Jy  sigma=8.521804
! Fit after  self-cal, rms=0.704768Jy  sigma=5.489005
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.282 mas, bmaj=10.28 mas, bpa=-19.79 degrees
! Estimated noise=1.63257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.225666 Jy
! Component: 100  -  total flux cleaned = 0.305557 Jy
! Total flux subtracted in 100 components = 0.305557 Jy
! Clean residual min=-0.015082 max=0.039741 Jy/beam
! Clean residual mean=-0.000021 rms=0.005152 Jy/beam
! Combined flux in latest and established models = 0.305557 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.305557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111482Jy  sigma=0.884574
! Fit after  self-cal, rms=0.111357Jy  sigma=0.883818
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475063 Jy
! Component: 100  -  total flux cleaned = 0.0770964 Jy
! Total flux subtracted in 100 components = 0.0770964 Jy
! Clean residual min=-0.010236 max=0.018726 Jy/beam
! Clean residual mean=0.000040 rms=0.003124 Jy/beam
! Combined flux in latest and established models = 0.382653 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 46 components and 0.382653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084133Jy  sigma=0.637049
! Fit after  self-cal, rms=0.084065Jy  sigma=0.636667
! Inverting map 
! Added new window around map position (6, 7.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213731 Jy
! Component: 100  -  total flux cleaned = 0.0366121 Jy
! Total flux subtracted in 100 components = 0.0366121 Jy
! Clean residual min=-0.008471 max=0.012074 Jy/beam
! Clean residual mean=0.000069 rms=0.002493 Jy/beam
! Combined flux in latest and established models = 0.419265 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 72 components and 0.419265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076640Jy  sigma=0.566259
! Fit after  self-cal, rms=0.076504Jy  sigma=0.565395
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.96 mas, bmaj=10.81 mas, bpa=-19.87 degrees
! Estimated noise=1.16309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159917 Jy
! Component: 100  -  total flux cleaned = 0.0264879 Jy
! Component: 150  -  total flux cleaned = 0.0336912 Jy
! Component: 200  -  total flux cleaned = 0.0387224 Jy
! Total flux subtracted in 200 components = 0.0387224 Jy
! Clean residual min=-0.006717 max=0.011409 Jy/beam
! Clean residual mean=0.000060 rms=0.002313 Jy/beam
! Combined flux in latest and established models = 0.457987 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 114 components and 0.457987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072703Jy  sigma=0.530868
! Fit after  self-cal, rms=0.072599Jy  sigma=0.530104
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.96 x 10.81 at -19.87 degrees (North through East)
! Clean map  min=-0.0065348  max=0.28738 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.09     HN        0.97     KP        0.97     
!   LA        0.98     MK        1.05     NL        0.96     OV        0.95     
!   PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.97     KP        0.96     
!   LA        1.00     MK        1.04     NL        1.07     OV        0.99     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        0.98     KP        0.97     
!   LA        1.00     MK        1.01     NL        1.06     OV        0.97     
!   PT        0.96     
! 
! 
! Fit before self-cal, rms=0.072599Jy  sigma=0.530104
! Fit after  self-cal, rms=0.071528Jy  sigma=0.506839
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.986 mas, bmaj=10.87 mas, bpa=-19.85 degrees
! Estimated noise=1.15837 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000788646 Jy
! Component: 100  -  total flux cleaned = 0.00115015 Jy
! Component: 150  -  total flux cleaned = 0.00123367 Jy
! Component: 200  -  total flux cleaned = 0.00123594 Jy
! Total flux subtracted in 200 components = 0.00123594 Jy
! Clean residual min=-0.006615 max=0.007087 Jy/beam
! Clean residual mean=0.000031 rms=0.001919 Jy/beam
! Combined flux in latest and established models = 0.459223 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 136 components and 0.459223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071289Jy  sigma=0.505400
! Fit after  self-cal, rms=0.071290Jy  sigma=0.505221
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071290Jy  sigma=0.505221
! Fit after  self-cal, rms=0.065178Jy  sigma=0.444127
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.977 mas, bmaj=10.88 mas, bpa=-20.04 degrees
! Estimated noise=1.16115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127693 Jy
! Component: 100  -  total flux cleaned = 0.00170111 Jy
! Component: 150  -  total flux cleaned = 0.00179849 Jy
! Component: 200  -  total flux cleaned = 0.00179757 Jy
! Total flux subtracted in 200 components = 0.00179757 Jy
! Clean residual min=-0.002919 max=0.002682 Jy/beam
! Clean residual mean=0.000009 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.461021 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 156 components and 0.461021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065065Jy  sigma=0.443245
! Fit after  self-cal, rms=0.065067Jy  sigma=0.443045
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184911 Jy
! Component: 100  -  total flux cleaned = 0.000182881 Jy
! Component: 150  -  total flux cleaned = 0.000105291 Jy
! Component: 200  -  total flux cleaned = 3.68347e-05 Jy
! Total flux subtracted in 200 components = 3.68347e-05 Jy
! Clean residual min=-0.002890 max=0.002658 Jy/beam
! Clean residual mean=0.000009 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.461058 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 160 components and 0.461058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065002Jy  sigma=0.442662
! Fit after  self-cal, rms=0.064986Jy  sigma=0.442574
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064986Jy  sigma=0.442574
! Fit after  self-cal, rms=0.064928Jy  sigma=0.441373
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.974 mas, bmaj=10.88 mas, bpa=-20.05 degrees
! Estimated noise=1.15924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00062162 Jy
! Component: 100  -  total flux cleaned = 0.000837575 Jy
! Component: 150  -  total flux cleaned = 0.000950057 Jy
! Component: 200  -  total flux cleaned = 0.000949199 Jy
! Total flux subtracted in 200 components = 0.000949199 Jy
! Clean residual min=-0.002608 max=0.002658 Jy/beam
! Clean residual mean=0.000003 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.462007 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 166 components and 0.462007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064867Jy  sigma=0.440978
! Fit after  self-cal, rms=0.064856Jy  sigma=0.440906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.92541e-05 Jy
! Component: 100  -  total flux cleaned = 5.856e-05 Jy
! Component: 150  -  total flux cleaned = 5.90779e-05 Jy
! Component: 200  -  total flux cleaned = 8.61079e-05 Jy
! Total flux subtracted in 200 components = 8.61079e-05 Jy
! Clean residual min=-0.002569 max=0.002644 Jy/beam
! Clean residual mean=0.000003 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.462093 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 171 components and 0.462093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064816Jy  sigma=0.440669
! Fit after  self-cal, rms=0.064808Jy  sigma=0.440608
! Inverting map 
! Added new window around map position (-8, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000880593 Jy
! Component: 100  -  total flux cleaned = 0.00050661 Jy
! Component: 150  -  total flux cleaned = 0.000205144 Jy
! Component: 200  -  total flux cleaned = 3.40634e-05 Jy
! Total flux subtracted in 200 components = 3.40634e-05 Jy
! Clean residual min=-0.002348 max=0.002139 Jy/beam
! Clean residual mean=0.000005 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.462127 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 194 components and 0.462127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064678Jy  sigma=0.439693
! Fit after  self-cal, rms=0.064661Jy  sigma=0.439631
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064661Jy  sigma=0.439631
! Fit after  self-cal, rms=0.064527Jy  sigma=0.439494
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.91 mas, bmaj=12.03 mas, bpa=-17.5 degrees
! Estimated noise=1.31019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000741257 Jy
! Component: 100  -  total flux cleaned = 0.00119673 Jy
! Component: 150  -  total flux cleaned = 0.00144249 Jy
! Component: 200  -  total flux cleaned = 0.00157402 Jy
! Total flux subtracted in 200 components = 0.00157402 Jy
! Clean residual min=-0.002405 max=0.001959 Jy/beam
! Clean residual mean=0.000006 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.463701 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 212 components and 0.463701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064500Jy  sigma=0.439286
! Fit after  self-cal, rms=0.064489Jy  sigma=0.439254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182393 Jy
! Component: 100  -  total flux cleaned = 0.000229853 Jy
! Component: 150  -  total flux cleaned = 0.000291945 Jy
! Component: 200  -  total flux cleaned = 0.000366568 Jy
! Total flux subtracted in 200 components = 0.000366568 Jy
! Clean residual min=-0.002408 max=0.001863 Jy/beam
! Clean residual mean=0.000006 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.464068 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 230 components and 0.464068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064481Jy  sigma=0.439202
! Fit after  self-cal, rms=0.064478Jy  sigma=0.439191
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.972 mas, bmaj=10.88 mas, bpa=-20.05 degrees
! Estimated noise=1.15791 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.972 x 10.88 at -20.05 degrees (North through East)
! Clean map  min=-0.0022928  max=0.28493 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.295 mas, bmaj=10.36 mas, bpa=-20.02 degrees
! Estimated noise=1.63187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.226185 Jy
! Component: 100  -  total flux cleaned = 0.30711 Jy
! Component: 150  -  total flux cleaned = 0.354635 Jy
! Component: 200  -  total flux cleaned = 0.384253 Jy
! Total flux subtracted in 200 components = 0.384253 Jy
! Clean residual min=-0.006764 max=0.015873 Jy/beam
! Clean residual mean=-0.000035 rms=0.002276 Jy/beam
! Combined flux in latest and established models = 0.384253 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.384253 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.972 mas, bmaj=10.88 mas, bpa=-20.05 degrees
! Estimated noise=1.15791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259478 Jy
! Component: 100  -  total flux cleaned = 0.0424774 Jy
! Component: 150  -  total flux cleaned = 0.0537528 Jy
! Component: 200  -  total flux cleaned = 0.0616172 Jy
! Total flux subtracted in 200 components = 0.0616172 Jy
! Clean residual min=-0.003207 max=0.004338 Jy/beam
! Clean residual mean=-0.000011 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.44587 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 92 components and 0.44587 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556917 Jy
! Component: 100  -  total flux cleaned = 0.00964257 Jy
! Component: 150  -  total flux cleaned = 0.0126897 Jy
! Component: 200  -  total flux cleaned = 0.0144801 Jy
! Total flux subtracted in 200 components = 0.0144801 Jy
! Clean residual min=-0.002808 max=0.002124 Jy/beam
! Clean residual mean=-0.000000 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.46035 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 139 components and 0.46035 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.91 mas, bmaj=12.03 mas, bpa=-17.5 degrees
! Estimated noise=1.31019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204628 Jy
! Component: 100  -  total flux cleaned = 0.00288628 Jy
! Component: 150  -  total flux cleaned = 0.00341459 Jy
! Component: 200  -  total flux cleaned = 0.00364784 Jy
! Total flux subtracted in 200 components = 0.00364784 Jy
! Clean residual min=-0.002520 max=0.001849 Jy/beam
! Clean residual mean=0.000004 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.463998 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.92621e-05 Jy
! Component: 100  -  total flux cleaned = 0.000183447 Jy
! Component: 150  -  total flux cleaned = 0.00023422 Jy
! Component: 200  -  total flux cleaned = 0.0002813 Jy
! Total flux subtracted in 200 components = 0.0002813 Jy
! Clean residual min=-0.002473 max=0.001821 Jy/beam
! Clean residual mean=0.000005 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.46428 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 203 components and 0.464279 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.972 mas, bmaj=10.88 mas, bpa=-20.05 degrees
! Estimated noise=1.15791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000599964 Jy
! Component: 100  -  total flux cleaned = -0.000817649 Jy
! Component: 150  -  total flux cleaned = -0.000858249 Jy
! Component: 200  -  total flux cleaned = -0.000858169 Jy
! Total flux subtracted in 200 components = -0.000858169 Jy
! Clean residual min=-0.002498 max=0.001934 Jy/beam
! Clean residual mean=0.000004 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.463421 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 224 components and 0.463421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064475Jy  sigma=0.439051
! Fit after  self-cal, rms=0.064450Jy  sigma=0.438943
wmodel J0347+2004_S_map.mod
! Writing 224 model components to file: J0347+2004_S_map.mod
wobs   J0347+2004_S_uvs.fits
! Writing UV FITS file: J0347+2004_S_uvs.fits
wwins  J0347+2004_S_map.win
! wwins: Wrote 3 windows to J0347+2004_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108103 Jy
! Component: 100  -  total flux cleaned = -0.00145374 Jy
! Component: 150  -  total flux cleaned = -0.00169646 Jy
! Component: 200  -  total flux cleaned = -0.00176336 Jy
! Component: 250  -  total flux cleaned = -0.00182545 Jy
! Component: 300  -  total flux cleaned = -0.0019159 Jy
! Component: 350  -  total flux cleaned = -0.0019456 Jy
! Component: 400  -  total flux cleaned = -0.0019738 Jy
! Component: 450  -  total flux cleaned = -0.00194585 Jy
! Component: 500  -  total flux cleaned = -0.00191854 Jy
! Component: 550  -  total flux cleaned = -0.00186651 Jy
! Component: 600  -  total flux cleaned = -0.00181556 Jy
! Component: 650  -  total flux cleaned = -0.00184048 Jy
! Component: 700  -  total flux cleaned = -0.00188911 Jy
! Component: 750  -  total flux cleaned = -0.0019847 Jy
! Component: 800  -  total flux cleaned = -0.00205442 Jy
! Component: 850  -  total flux cleaned = -0.00203149 Jy
! Component: 900  -  total flux cleaned = -0.00214514 Jy
! Component: 950  -  total flux cleaned = -0.00221139 Jy
! Component: 1000  -  total flux cleaned = -0.00227665 Jy
! Component: 1050  -  total flux cleaned = -0.00238353 Jy
! Component: 1100  -  total flux cleaned = -0.00238329 Jy
! Component: 1150  -  total flux cleaned = -0.0023837 Jy
! Component: 1200  -  total flux cleaned = -0.00240447 Jy
! Component: 1250  -  total flux cleaned = -0.00240491 Jy
! Component: 1300  -  total flux cleaned = -0.00244439 Jy
! Component: 1350  -  total flux cleaned = -0.00244401 Jy
! Component: 1400  -  total flux cleaned = -0.00236709 Jy
! Component: 1450  -  total flux cleaned = -0.00238596 Jy
! Component: 1500  -  total flux cleaned = -0.002386 Jy
! Component: 1550  -  total flux cleaned = -0.00236719 Jy
! Component: 1600  -  total flux cleaned = -0.00229355 Jy
! Component: 1650  -  total flux cleaned = -0.00225727 Jy
! Component: 1700  -  total flux cleaned = -0.00227535 Jy
! Component: 1750  -  total flux cleaned = -0.00218588 Jy
! Component: 1800  -  total flux cleaned = -0.00209749 Jy
! Component: 1850  -  total flux cleaned = -0.00202749 Jy
! Component: 1900  -  total flux cleaned = -0.00199261 Jy
! Component: 1950  -  total flux cleaned = -0.00190686 Jy
! Component: 2000  -  total flux cleaned = -0.00183889 Jy
! Component: 2050  -  total flux cleaned = -0.0017549 Jy
! Component: 2100  -  total flux cleaned = -0.00173829 Jy
! Component: 2150  -  total flux cleaned = -0.00172169 Jy
! Component: 2200  -  total flux cleaned = -0.00168867 Jy
! Component: 2250  -  total flux cleaned = -0.00167246 Jy
! Component: 2300  -  total flux cleaned = -0.00164003 Jy
! Component: 2350  -  total flux cleaned = -0.00168797 Jy
! Component: 2400  -  total flux cleaned = -0.00164058 Jy
! Component: 2450  -  total flux cleaned = -0.00165644 Jy
! Component: 2500  -  total flux cleaned = -0.00165627 Jy
! Component: 2550  -  total flux cleaned = -0.00162554 Jy
! Component: 2600  -  total flux cleaned = -0.00161024 Jy
! Component: 2650  -  total flux cleaned = -0.00168617 Jy
! Component: 2700  -  total flux cleaned = -0.00164099 Jy
! Component: 2750  -  total flux cleaned = -0.00165579 Jy
! Component: 2800  -  total flux cleaned = -0.00168531 Jy
! Component: 2850  -  total flux cleaned = -0.00168513 Jy
! Component: 2900  -  total flux cleaned = -0.0017142 Jy
! Component: 2950  -  total flux cleaned = -0.00168519 Jy
! Component: 3000  -  total flux cleaned = -0.00174281 Jy
! Component: 3050  -  total flux cleaned = -0.00184275 Jy
! Component: 3100  -  total flux cleaned = -0.00178613 Jy
! Component: 3150  -  total flux cleaned = -0.00177216 Jy
! Component: 3200  -  total flux cleaned = -0.00186978 Jy
! Component: 3250  -  total flux cleaned = -0.00184207 Jy
! Component: 3300  -  total flux cleaned = -0.00185598 Jy
! Component: 3350  -  total flux cleaned = -0.00191073 Jy
! Component: 3400  -  total flux cleaned = -0.00191063 Jy
! Component: 3450  -  total flux cleaned = -0.00195124 Jy
! Component: 3500  -  total flux cleaned = -0.00203167 Jy
! Component: 3550  -  total flux cleaned = -0.00203151 Jy
! Component: 3600  -  total flux cleaned = -0.00204471 Jy
! Component: 3650  -  total flux cleaned = -0.00199212 Jy
! Component: 3700  -  total flux cleaned = -0.00205753 Jy
! Component: 3750  -  total flux cleaned = -0.00205757 Jy
! Component: 3800  -  total flux cleaned = -0.00209612 Jy
! Component: 3850  -  total flux cleaned = -0.00207054 Jy
! Component: 3900  -  total flux cleaned = -0.00210875 Jy
! Component: 3950  -  total flux cleaned = -0.002096 Jy
! Component: 4000  -  total flux cleaned = -0.00205845 Jy
! Component: 4050  -  total flux cleaned = -0.00209578 Jy
! Total flux subtracted in 4096 components = -0.00202134 Jy
! Clean residual min=-0.000713 max=0.000758 Jy/beam
! Clean residual mean=-0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.4614 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 518 components and 0.4614 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0347+2004_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.972 x 10.88 at -20.05 degrees (North through East)
! Clean map  min=-0.0015788  max=0.2847 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0347+2004_S_map.fits
wmodel /image_prod/ug002_uva//J0347+2004_S_map.mod
! Writing 518 model components to file: /image_prod/ug002_uva//J0347+2004_S_map.mod
wobs   /image_prod/ug002_uva//J0347+2004_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0347+2004_S_uvs.fits
wwins  /image_prod/ug002_uva//J0347+2004_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0347+2004_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.284699 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000236762 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.249487 0.249487 0.498973 0.997946 1.99589 3.99178 7.98357 15.9671 31.9343 63.8686
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.284 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1202.47 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0347+2004_S_dfm.log closed on Wed Mar  4 20:02:16 2020