! Started logfile: /image_prod/ug002_uva//J0344+6827_S_dfm.log on Wed Mar 4 20:01:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0344+6827_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0344+6827_S_uva.fits ! AN table 1: 45 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.957143 visibilities/baseline/integration-bin. ! Found source: J0344+6827 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 3618 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0344+6827_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013477Jy sigma=7.673919 ! Fit after self-cal, rms=0.866106Jy sigma=6.510968 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=3.634 mas, bpa=16.89 degrees ! Estimated noise=2.22249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10669 Jy ! Component: 100 - total flux cleaned = 0.130512 Jy ! Total flux subtracted in 100 components = 0.130512 Jy ! Clean residual min=-0.005906 max=0.008021 Jy/beam ! Clean residual mean=0.000008 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.130512 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.130512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067336Jy sigma=0.462262 ! Fit after self-cal, rms=0.067322Jy sigma=0.462161 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=4.14 mas, bpa=20.43 degrees ! Estimated noise=1.59582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910046 Jy ! Component: 100 - total flux cleaned = 0.0128895 Jy ! Component: 150 - total flux cleaned = 0.0149507 Jy ! Component: 200 - total flux cleaned = 0.0162195 Jy ! Total flux subtracted in 200 components = 0.0162195 Jy ! Clean residual min=-0.005002 max=0.007002 Jy/beam ! Clean residual mean=0.000009 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.146732 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.146732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066501Jy sigma=0.451025 ! Fit after self-cal, rms=0.066497Jy sigma=0.450969 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 4.14 at 20.43 degrees (North through East) ! Clean map min=-0.0048561 max=0.13822 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.02 KP 0.96 ! MK 1.03 NL 1.01 OV 0.88 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.99 KP 0.99 ! MK 1.00 NL 1.45 OV 0.89 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.95 KP 0.98 ! MK 1.03 NL 0.99 OV 0.93 SC 1.03 ! ! ! Fit before self-cal, rms=0.066497Jy sigma=0.450969 ! Fit after self-cal, rms=0.067978Jy sigma=0.436476 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=4.178 mas, bpa=20.07 degrees ! Estimated noise=1.58777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121806 Jy ! Component: 100 - total flux cleaned = -0.00169944 Jy ! Component: 150 - total flux cleaned = -0.00173518 Jy ! Component: 200 - total flux cleaned = -0.00173516 Jy ! Total flux subtracted in 200 components = -0.00173516 Jy ! Clean residual min=-0.004105 max=0.004802 Jy/beam ! Clean residual mean=0.000008 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.144996 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.144996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067919Jy sigma=0.436463 ! Fit after self-cal, rms=0.068072Jy sigma=0.436319 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068072Jy sigma=0.436319 ! Fit after self-cal, rms=0.074309Jy sigma=0.423438 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=4.18 mas, bpa=21.16 degrees ! Estimated noise=1.58589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183312 Jy ! Component: 100 - total flux cleaned = -0.000202855 Jy ! Component: 150 - total flux cleaned = -0.000202987 Jy ! Component: 200 - total flux cleaned = -0.000227744 Jy ! Total flux subtracted in 200 components = -0.000227744 Jy ! Clean residual min=-0.002969 max=0.002814 Jy/beam ! Clean residual mean=0.000005 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.144769 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.144769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074302Jy sigma=0.423372 ! Fit after self-cal, rms=0.074383Jy sigma=0.423249 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.67756e-05 Jy ! Component: 100 - total flux cleaned = -5.5638e-05 Jy ! Component: 150 - total flux cleaned = -5.58204e-05 Jy ! Component: 200 - total flux cleaned = -4.83784e-05 Jy ! Total flux subtracted in 200 components = -4.83784e-05 Jy ! Clean residual min=-0.002959 max=0.002809 Jy/beam ! Clean residual mean=0.000005 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.14472 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.14472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074380Jy sigma=0.423234 ! Fit after self-cal, rms=0.074378Jy sigma=0.423233 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074378Jy sigma=0.423233 ! Fit after self-cal, rms=0.074525Jy sigma=0.423206 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=4.179 mas, bpa=21.66 degrees ! Estimated noise=1.58548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.48343e-05 Jy ! Component: 100 - total flux cleaned = -3.52141e-05 Jy ! Component: 150 - total flux cleaned = -5.66446e-05 Jy ! Component: 200 - total flux cleaned = -7.46753e-05 Jy ! Total flux subtracted in 200 components = -7.46753e-05 Jy ! Clean residual min=-0.002962 max=0.002822 Jy/beam ! Clean residual mean=0.000005 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.144646 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.144646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074522Jy sigma=0.423179 ! Fit after self-cal, rms=0.074522Jy sigma=0.423178 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.57433e-06 Jy ! Component: 100 - total flux cleaned = -8.74712e-06 Jy ! Component: 150 - total flux cleaned = -1.75336e-06 Jy ! Component: 200 - total flux cleaned = -1.90956e-06 Jy ! Total flux subtracted in 200 components = -1.90956e-06 Jy ! Clean residual min=-0.002964 max=0.002816 Jy/beam ! Clean residual mean=0.000005 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.144644 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.144644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074520Jy sigma=0.423170 ! Fit after self-cal, rms=0.074520Jy sigma=0.423169 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074520Jy sigma=0.423169 ! Fit after self-cal, rms=0.074514Jy sigma=0.423158 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.981 mas, bmaj=7.717 mas, bpa=47.69 degrees ! Estimated noise=1.99735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649843 Jy ! Component: 100 - total flux cleaned = 0.000653286 Jy ! Component: 150 - total flux cleaned = 0.000713988 Jy ! Component: 200 - total flux cleaned = 0.000750711 Jy ! Total flux subtracted in 200 components = 0.000750711 Jy ! Clean residual min=-0.003392 max=0.003122 Jy/beam ! Clean residual mean=0.000012 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.145394 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.145394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074516Jy sigma=0.423363 ! Fit after self-cal, rms=0.074504Jy sigma=0.423285 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.66003e-05 Jy ! Component: 100 - total flux cleaned = 6.54228e-05 Jy ! Component: 150 - total flux cleaned = 9.98456e-05 Jy ! Component: 200 - total flux cleaned = 0.000129265 Jy ! Total flux subtracted in 200 components = 0.000129265 Jy ! Clean residual min=-0.003359 max=0.003133 Jy/beam ! Clean residual mean=0.000012 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.145524 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.145524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074508Jy sigma=0.423433 ! Fit after self-cal, rms=0.074504Jy sigma=0.423398 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=4.177 mas, bpa=22.02 degrees ! Estimated noise=1.58524 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.562 x 4.177 at 22.02 degrees (North through East) ! Clean map min=-0.0029339 max=0.13726 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=3.676 mas, bpa=18.71 degrees ! Estimated noise=2.2295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106963 Jy ! Component: 100 - total flux cleaned = 0.13051 Jy ! Component: 150 - total flux cleaned = 0.137868 Jy ! Component: 200 - total flux cleaned = 0.141097 Jy ! Total flux subtracted in 200 components = 0.141097 Jy ! Clean residual min=-0.003894 max=0.004024 Jy/beam ! Clean residual mean=0.000004 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.141097 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.141097 Jy ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=4.177 mas, bpa=22.02 degrees ! Estimated noise=1.58524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207229 Jy ! Component: 100 - total flux cleaned = 0.00252996 Jy ! Component: 150 - total flux cleaned = 0.0027633 Jy ! Component: 200 - total flux cleaned = 0.00292307 Jy ! Total flux subtracted in 200 components = 0.00292307 Jy ! Clean residual min=-0.002845 max=0.002809 Jy/beam ! Clean residual mean=0.000005 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.14402 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.14402 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.981 mas, bmaj=7.717 mas, bpa=47.69 degrees ! Estimated noise=1.99735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127033 Jy ! Component: 100 - total flux cleaned = 0.00127615 Jy ! Component: 150 - total flux cleaned = 0.00129265 Jy ! Component: 200 - total flux cleaned = 0.0013431 Jy ! Total flux subtracted in 200 components = 0.0013431 Jy ! Clean residual min=-0.003392 max=0.003183 Jy/beam ! Clean residual mean=0.000012 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.145363 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.50687e-05 Jy ! Component: 100 - total flux cleaned = 6.85833e-05 Jy ! Component: 150 - total flux cleaned = 0.000100278 Jy ! Component: 200 - total flux cleaned = 0.000129661 Jy ! Total flux subtracted in 200 components = 0.000129661 Jy ! Clean residual min=-0.003379 max=0.003166 Jy/beam ! Clean residual mean=0.000012 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.145493 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.145493 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=4.177 mas, bpa=22.02 degrees ! Estimated noise=1.58524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000650748 Jy ! Component: 100 - total flux cleaned = -0.000786374 Jy ! Component: 150 - total flux cleaned = -0.000829005 Jy ! Component: 200 - total flux cleaned = -0.00088171 Jy ! Total flux subtracted in 200 components = -0.00088171 Jy ! Clean residual min=-0.002927 max=0.002831 Jy/beam ! Clean residual mean=0.000005 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.144611 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.144611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074504Jy sigma=0.423357 ! Fit after self-cal, rms=0.074509Jy sigma=0.423335 wmodel J0344+6827_S_map.mod ! Writing 42 model components to file: J0344+6827_S_map.mod wobs J0344+6827_S_uvs.fits ! Writing UV FITS file: J0344+6827_S_uvs.fits wwins J0344+6827_S_map.win ! wwins: Wrote 1 windows to J0344+6827_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172568 Jy ! Component: 100 - total flux cleaned = -0.000124597 Jy ! Component: 150 - total flux cleaned = -7.99556e-05 Jy ! Component: 200 - total flux cleaned = -0.000122252 Jy ! Component: 250 - total flux cleaned = -0.000246055 Jy ! Component: 300 - total flux cleaned = -0.000325869 Jy ! Component: 350 - total flux cleaned = -0.000442454 Jy ! Component: 400 - total flux cleaned = -0.000517758 Jy ! Component: 450 - total flux cleaned = -0.000700743 Jy ! Component: 500 - total flux cleaned = -0.000736347 Jy ! Component: 550 - total flux cleaned = -0.000771525 Jy ! Component: 600 - total flux cleaned = -0.000874608 Jy ! Component: 650 - total flux cleaned = -0.000840816 Jy ! Component: 700 - total flux cleaned = -0.000873824 Jy ! Component: 750 - total flux cleaned = -0.00090557 Jy ! Component: 800 - total flux cleaned = -0.000936482 Jy ! Component: 850 - total flux cleaned = -0.000935937 Jy ! Component: 900 - total flux cleaned = -0.000904902 Jy ! Component: 950 - total flux cleaned = -0.000934451 Jy ! Component: 1000 - total flux cleaned = -0.000875178 Jy ! Component: 1050 - total flux cleaned = -0.000846954 Jy ! Component: 1100 - total flux cleaned = -0.000847008 Jy ! Component: 1150 - total flux cleaned = -0.000846971 Jy ! Component: 1200 - total flux cleaned = -0.000846313 Jy ! Component: 1250 - total flux cleaned = -0.000818131 Jy ! Component: 1300 - total flux cleaned = -0.000845181 Jy ! Component: 1350 - total flux cleaned = -0.000898152 Jy ! Component: 1400 - total flux cleaned = -0.000898434 Jy ! Component: 1450 - total flux cleaned = -0.000924249 Jy ! Component: 1500 - total flux cleaned = -0.0009245 Jy ! Component: 1550 - total flux cleaned = -0.000848784 Jy ! Component: 1600 - total flux cleaned = -0.00089896 Jy ! Component: 1650 - total flux cleaned = -0.000874258 Jy ! Component: 1700 - total flux cleaned = -0.000874142 Jy ! Component: 1750 - total flux cleaned = -0.000898239 Jy ! Component: 1800 - total flux cleaned = -0.000897988 Jy ! Component: 1850 - total flux cleaned = -0.000921446 Jy ! Component: 1900 - total flux cleaned = -0.000874733 Jy ! Component: 1950 - total flux cleaned = -0.000874459 Jy ! Component: 2000 - total flux cleaned = -0.000806503 Jy ! Component: 2050 - total flux cleaned = -0.000851388 Jy ! Component: 2100 - total flux cleaned = -0.000807092 Jy ! Component: 2150 - total flux cleaned = -0.000785368 Jy ! Component: 2200 - total flux cleaned = -0.000742282 Jy ! Component: 2250 - total flux cleaned = -0.00080624 Jy ! Component: 2300 - total flux cleaned = -0.00074255 Jy ! Component: 2350 - total flux cleaned = -0.000721372 Jy ! Component: 2400 - total flux cleaned = -0.000618255 Jy ! Component: 2450 - total flux cleaned = -0.000577598 Jy ! Component: 2500 - total flux cleaned = -0.000537278 Jy ! Component: 2550 - total flux cleaned = -0.000457749 Jy ! Component: 2600 - total flux cleaned = -0.000457638 Jy ! Component: 2650 - total flux cleaned = -0.000398877 Jy ! Component: 2700 - total flux cleaned = -0.000360319 Jy ! Component: 2750 - total flux cleaned = -0.000283539 Jy ! Component: 2800 - total flux cleaned = -0.000226726 Jy ! Component: 2850 - total flux cleaned = -0.000245526 Jy ! Component: 2900 - total flux cleaned = -0.000208242 Jy ! Component: 2950 - total flux cleaned = -0.000189836 Jy ! Component: 3000 - total flux cleaned = -0.000153069 Jy ! Component: 3050 - total flux cleaned = -8.03063e-05 Jy ! Component: 3100 - total flux cleaned = -6.22491e-05 Jy ! Component: 3150 - total flux cleaned = -8.8491e-06 Jy ! Component: 3200 - total flux cleaned = 9.71366e-05 Jy ! Component: 3250 - total flux cleaned = 0.000131668 Jy ! Component: 3300 - total flux cleaned = 0.000149111 Jy ! Component: 3350 - total flux cleaned = 0.000235039 Jy ! Component: 3400 - total flux cleaned = 0.000320121 Jy ! Component: 3450 - total flux cleaned = 0.000319922 Jy ! Component: 3500 - total flux cleaned = 0.000370023 Jy ! Component: 3550 - total flux cleaned = 0.000386421 Jy ! Component: 3600 - total flux cleaned = 0.000402903 Jy ! Component: 3650 - total flux cleaned = 0.000386962 Jy ! Component: 3700 - total flux cleaned = 0.000484315 Jy ! Component: 3750 - total flux cleaned = 0.00056471 Jy ! Component: 3800 - total flux cleaned = 0.00061241 Jy ! Component: 3850 - total flux cleaned = 0.000628194 Jy ! Component: 3900 - total flux cleaned = 0.000722405 Jy ! Component: 3950 - total flux cleaned = 0.000722421 Jy ! Component: 4000 - total flux cleaned = 0.000784435 Jy ! Component: 4050 - total flux cleaned = 0.000815172 Jy ! Total flux subtracted in 4096 components = 0.000906397 Jy ! Clean residual min=-0.000874 max=0.000805 Jy/beam ! Clean residual mean=0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.145518 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 349 components and 0.145518 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0344+6827_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.562 x 4.177 at 22.02 degrees (North through East) ! Clean map min=-0.0015404 max=0.13694 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0344+6827_S_map.fits wmodel /image_prod/ug002_uva//J0344+6827_S_map.mod ! Writing 349 model components to file: /image_prod/ug002_uva//J0344+6827_S_map.mod wobs /image_prod/ug002_uva//J0344+6827_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0344+6827_S_uvs.fits wwins /image_prod/ug002_uva//J0344+6827_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0344+6827_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.13694 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000257841 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.564862 0.564862 1.12972 2.25945 4.5189 9.03779 18.0756 36.1512 72.3024 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.136 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 531.103 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0344+6827_S_dfm.log closed on Wed Mar 4 20:01:36 2020