! Started logfile: /image_prod/ug002_uva//J0343-2530_S_dfm.log on Wed Mar  4 20:01:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0343-2530_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0343-2530_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.873889 visibilities/baseline/integration-bin.
! Found source: J0343-2530
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4719 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0343-2530_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012992Jy  sigma=6.717087
! Fit after  self-cal, rms=0.790311Jy  sigma=5.155160
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.701 mas, bmaj=13.17 mas, bpa=-18.66 degrees
! Estimated noise=2.38774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.163454 Jy
! Component: 100  -  total flux cleaned = 0.202831 Jy
! Total flux subtracted in 100 components = 0.202831 Jy
! Clean residual min=-0.012581 max=0.016735 Jy/beam
! Clean residual mean=-0.000081 rms=0.003406 Jy/beam
! Combined flux in latest and established models = 0.202831 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.202831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089987Jy  sigma=0.561381
! Fit after  self-cal, rms=0.089995Jy  sigma=0.561277
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.437 mas, bmaj=14.86 mas, bpa=-17.53 degrees
! Estimated noise=1.6058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268787 Jy
! Component: 100  -  total flux cleaned = 0.0419564 Jy
! Component: 150  -  total flux cleaned = 0.0512308 Jy
! Component: 200  -  total flux cleaned = 0.0572219 Jy
! Total flux subtracted in 200 components = 0.0572219 Jy
! Clean residual min=-0.009982 max=0.012657 Jy/beam
! Clean residual mean=0.000012 rms=0.002745 Jy/beam
! Combined flux in latest and established models = 0.260053 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 70 components and 0.260053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082932Jy  sigma=0.491657
! Fit after  self-cal, rms=0.082942Jy  sigma=0.491282
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.437 x 14.86 at -17.53 degrees (North through East)
! Clean map  min=-0.0092581  max=0.21336 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.90     HN        1.06     KP        1.01     
!   LA        1.07     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.44     FD        0.87     HN        1.10     KP        0.98     
!   LA        1.08     MK        1.01     NL        1.02     OV        0.82     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.08     KP        0.99     
!   LA        1.09     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.01     
! 
! 
! Fit before self-cal, rms=0.082942Jy  sigma=0.491282
! Fit after  self-cal, rms=0.086985Jy  sigma=0.456944
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=15.24 mas, bpa=-17.6 degrees
! Estimated noise=1.61941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.80178e-05 Jy
! Component: 100  -  total flux cleaned = -0.000143354 Jy
! Component: 150  -  total flux cleaned = -0.000191561 Jy
! Component: 200  -  total flux cleaned = -0.000274598 Jy
! Total flux subtracted in 200 components = -0.000274598 Jy
! Clean residual min=-0.005712 max=0.006778 Jy/beam
! Clean residual mean=-0.000044 rms=0.001760 Jy/beam
! Combined flux in latest and established models = 0.259778 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.259778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086883Jy  sigma=0.456370
! Fit after  self-cal, rms=0.087083Jy  sigma=0.456102
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087083Jy  sigma=0.456102
! Fit after  self-cal, rms=0.087581Jy  sigma=0.448951
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.473 mas, bmaj=15.37 mas, bpa=-17.8 degrees
! Estimated noise=1.62766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000388124 Jy
! Component: 100  -  total flux cleaned = -0.00061342 Jy
! Component: 150  -  total flux cleaned = -0.000707481 Jy
! Component: 200  -  total flux cleaned = -0.000872864 Jy
! Total flux subtracted in 200 components = -0.000872864 Jy
! Clean residual min=-0.005035 max=0.006423 Jy/beam
! Clean residual mean=-0.000047 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.258906 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 103 components and 0.258906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087500Jy  sigma=0.448510
! Fit after  self-cal, rms=0.087517Jy  sigma=0.448465
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16.5, -36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00626724 Jy
! Component: 100  -  total flux cleaned = 0.00993311 Jy
! Component: 150  -  total flux cleaned = 0.0125339 Jy
! Component: 200  -  total flux cleaned = 0.0145555 Jy
! Total flux subtracted in 200 components = 0.0145555 Jy
! Clean residual min=-0.004099 max=0.004017 Jy/beam
! Clean residual mean=-0.000034 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.273461 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 145 components and 0.273461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086984Jy  sigma=0.444391
! Fit after  self-cal, rms=0.086932Jy  sigma=0.444144
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086932Jy  sigma=0.444144
! Fit after  self-cal, rms=0.087795Jy  sigma=0.442766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=15.45 mas, bpa=-17.9 degrees
! Estimated noise=1.62028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219163 Jy
! Component: 100  -  total flux cleaned = 0.00259273 Jy
! Component: 150  -  total flux cleaned = 0.00276246 Jy
! Component: 200  -  total flux cleaned = 0.00291541 Jy
! Total flux subtracted in 200 components = 0.00291541 Jy
! Clean residual min=-0.003631 max=0.003664 Jy/beam
! Clean residual mean=-0.000029 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.276377 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 177 components and 0.276377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087668Jy  sigma=0.442052
! Fit after  self-cal, rms=0.087670Jy  sigma=0.441990
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472845 Jy
! Component: 100  -  total flux cleaned = 0.000613972 Jy
! Component: 150  -  total flux cleaned = 0.000658178 Jy
! Component: 200  -  total flux cleaned = 0.000740491 Jy
! Total flux subtracted in 200 components = 0.000740491 Jy
! Clean residual min=-0.003482 max=0.003611 Jy/beam
! Clean residual mean=-0.000028 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.277117 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 197 components and 0.277117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087606Jy  sigma=0.441719
! Fit after  self-cal, rms=0.087602Jy  sigma=0.441699
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087602Jy  sigma=0.441699
! Fit after  self-cal, rms=0.087667Jy  sigma=0.441584
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.341 mas, bmaj=23.62 mas, bpa=-3.822 degrees
! Estimated noise=1.88713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358378 Jy
! Component: 100  -  total flux cleaned = 0.000154979 Jy
! Component: 150  -  total flux cleaned = 0.000232116 Jy
! Component: 200  -  total flux cleaned = 0.000329728 Jy
! Total flux subtracted in 200 components = 0.000329728 Jy
! Clean residual min=-0.003718 max=0.003832 Jy/beam
! Clean residual mean=-0.000043 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.277447 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 214 components and 0.277447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087636Jy  sigma=0.441425
! Fit after  self-cal, rms=0.087633Jy  sigma=0.441391
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235786 Jy
! Component: 100  -  total flux cleaned = 0.000261695 Jy
! Component: 150  -  total flux cleaned = 0.000286769 Jy
! Component: 200  -  total flux cleaned = 0.000309434 Jy
! Total flux subtracted in 200 components = 0.000309434 Jy
! Clean residual min=-0.003584 max=0.003721 Jy/beam
! Clean residual mean=-0.000042 rms=0.001161 Jy/beam
! Combined flux in latest and established models = 0.277756 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 224 components and 0.277756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087617Jy  sigma=0.441389
! Fit after  self-cal, rms=0.087616Jy  sigma=0.441380
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=15.47 mas, bpa=-17.93 degrees
! Estimated noise=1.61743 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.469 x 15.47 at -17.93 degrees (North through East)
! Clean map  min=-0.0033246  max=0.21443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.724 mas, bmaj=13.61 mas, bpa=-19.12 degrees
! Estimated noise=2.42473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165797 Jy
! Component: 100  -  total flux cleaned = 0.205155 Jy
! Component: 150  -  total flux cleaned = 0.222023 Jy
! Component: 200  -  total flux cleaned = 0.232209 Jy
! Total flux subtracted in 200 components = 0.232209 Jy
! Clean residual min=-0.005286 max=0.006552 Jy/beam
! Clean residual mean=-0.000055 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.232208 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.232208 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=15.47 mas, bpa=-17.93 degrees
! Estimated noise=1.61743 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103984 Jy
! Component: 100  -  total flux cleaned = 0.0170654 Jy
! Component: 150  -  total flux cleaned = 0.0221148 Jy
! Component: 200  -  total flux cleaned = 0.0261342 Jy
! Total flux subtracted in 200 components = 0.0261342 Jy
! Clean residual min=-0.003841 max=0.003279 Jy/beam
! Clean residual mean=-0.000050 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.258343 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 103 components and 0.258343 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.341 mas, bmaj=23.62 mas, bpa=-3.822 degrees
! Estimated noise=1.88713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00472686 Jy
! Component: 100  -  total flux cleaned = 0.00828547 Jy
! Component: 150  -  total flux cleaned = 0.0111218 Jy
! Component: 200  -  total flux cleaned = 0.0134229 Jy
! Total flux subtracted in 200 components = 0.0134229 Jy
! Clean residual min=-0.003652 max=0.004078 Jy/beam
! Clean residual mean=-0.000058 rms=0.001182 Jy/beam
! Combined flux in latest and established models = 0.271765 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018884 Jy
! Component: 100  -  total flux cleaned = 0.00345114 Jy
! Component: 150  -  total flux cleaned = 0.00456101 Jy
! Component: 200  -  total flux cleaned = 0.00529648 Jy
! Total flux subtracted in 200 components = 0.00529648 Jy
! Clean residual min=-0.003448 max=0.003977 Jy/beam
! Clean residual mean=-0.000046 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.277062 Jy
! Adding 132 model components to the UV plane model.
! The established model now contains 227 components and 0.277062 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=15.47 mas, bpa=-17.93 degrees
! Estimated noise=1.61743 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881065 Jy
! Component: 100  -  total flux cleaned = 0.00150141 Jy
! Component: 150  -  total flux cleaned = 0.00205379 Jy
! Component: 200  -  total flux cleaned = 0.00255657 Jy
! Total flux subtracted in 200 components = 0.00255657 Jy
! Clean residual min=-0.003093 max=0.002849 Jy/beam
! Clean residual mean=-0.000022 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.279619 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 251 components and 0.279619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087376Jy  sigma=0.440727
! Fit after  self-cal, rms=0.087280Jy  sigma=0.440479
wmodel J0343-2530_S_map.mod
! Writing 251 model components to file: J0343-2530_S_map.mod
wobs   J0343-2530_S_uvs.fits
! Writing UV FITS file: J0343-2530_S_uvs.fits
wwins  J0343-2530_S_map.win
! wwins: Wrote 3 windows to J0343-2530_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000739222 Jy
! Component: 100  -  total flux cleaned = -0.00108953 Jy
! Component: 150  -  total flux cleaned = -0.00123382 Jy
! Component: 200  -  total flux cleaned = -0.00136929 Jy
! Component: 250  -  total flux cleaned = -0.00141402 Jy
! Component: 300  -  total flux cleaned = -0.00141481 Jy
! Component: 350  -  total flux cleaned = -0.00141449 Jy
! Component: 400  -  total flux cleaned = -0.0014893 Jy
! Component: 450  -  total flux cleaned = -0.00163573 Jy
! Component: 500  -  total flux cleaned = -0.00188563 Jy
! Component: 550  -  total flux cleaned = -0.00202415 Jy
! Component: 600  -  total flux cleaned = -0.00202397 Jy
! Component: 650  -  total flux cleaned = -0.00212195 Jy
! Component: 700  -  total flux cleaned = -0.0021529 Jy
! Component: 750  -  total flux cleaned = -0.002153 Jy
! Component: 800  -  total flux cleaned = -0.00218351 Jy
! Component: 850  -  total flux cleaned = -0.00227251 Jy
! Component: 900  -  total flux cleaned = -0.0023012 Jy
! Component: 950  -  total flux cleaned = -0.00238646 Jy
! Component: 1000  -  total flux cleaned = -0.00235875 Jy
! Component: 1050  -  total flux cleaned = -0.00260528 Jy
! Component: 1100  -  total flux cleaned = -0.00268539 Jy
! Component: 1150  -  total flux cleaned = -0.00284284 Jy
! Component: 1200  -  total flux cleaned = -0.00302316 Jy
! Component: 1250  -  total flux cleaned = -0.00322548 Jy
! Component: 1300  -  total flux cleaned = -0.00339961 Jy
! Component: 1350  -  total flux cleaned = -0.00357114 Jy
! Component: 1400  -  total flux cleaned = -0.00371534 Jy
! Component: 1450  -  total flux cleaned = -0.0038334 Jy
! Component: 1500  -  total flux cleaned = -0.00388004 Jy
! Component: 1550  -  total flux cleaned = -0.00392602 Jy
! Component: 1600  -  total flux cleaned = -0.00403862 Jy
! Component: 1650  -  total flux cleaned = -0.00414928 Jy
! Component: 1700  -  total flux cleaned = -0.00423592 Jy
! Component: 1750  -  total flux cleaned = -0.00427868 Jy
! Component: 1800  -  total flux cleaned = -0.00440571 Jy
! Component: 1850  -  total flux cleaned = -0.00444772 Jy
! Component: 1900  -  total flux cleaned = -0.00457145 Jy
! Component: 1950  -  total flux cleaned = -0.00459154 Jy
! Component: 2000  -  total flux cleaned = -0.00461157 Jy
! Component: 2050  -  total flux cleaned = -0.00471068 Jy
! Component: 2100  -  total flux cleaned = -0.00472992 Jy
! Component: 2150  -  total flux cleaned = -0.00476859 Jy
! Component: 2200  -  total flux cleaned = -0.00478793 Jy
! Component: 2250  -  total flux cleaned = -0.00490184 Jy
! Component: 2300  -  total flux cleaned = -0.00492065 Jy
! Component: 2350  -  total flux cleaned = -0.00499474 Jy
! Component: 2400  -  total flux cleaned = -0.0050499 Jy
! Component: 2450  -  total flux cleaned = -0.00512241 Jy
! Component: 2500  -  total flux cleaned = -0.00521207 Jy
! Component: 2550  -  total flux cleaned = -0.00530066 Jy
! Component: 2600  -  total flux cleaned = -0.00535334 Jy
! Component: 2650  -  total flux cleaned = -0.00542314 Jy
! Component: 2700  -  total flux cleaned = -0.00550945 Jy
! Component: 2750  -  total flux cleaned = -0.00561188 Jy
! Component: 2800  -  total flux cleaned = -0.00569613 Jy
! Component: 2850  -  total flux cleaned = -0.00577964 Jy
! Component: 2900  -  total flux cleaned = -0.00584606 Jy
! Component: 2950  -  total flux cleaned = -0.0059119 Jy
! Component: 3000  -  total flux cleaned = -0.0059772 Jy
! Component: 3050  -  total flux cleaned = -0.00605792 Jy
! Component: 3100  -  total flux cleaned = -0.00613786 Jy
! Component: 3150  -  total flux cleaned = -0.00615377 Jy
! Component: 3200  -  total flux cleaned = -0.0062325 Jy
! Component: 3250  -  total flux cleaned = -0.00631062 Jy
! Component: 3300  -  total flux cleaned = -0.00640338 Jy
! Component: 3350  -  total flux cleaned = -0.00651077 Jy
! Component: 3400  -  total flux cleaned = -0.00661732 Jy
! Component: 3450  -  total flux cleaned = -0.00669299 Jy
! Component: 3500  -  total flux cleaned = -0.00679809 Jy
! Component: 3550  -  total flux cleaned = -0.00685759 Jy
! Component: 3600  -  total flux cleaned = -0.00697573 Jy
! Component: 3650  -  total flux cleaned = -0.00704901 Jy
! Component: 3700  -  total flux cleaned = -0.0070925 Jy
! Component: 3750  -  total flux cleaned = -0.00716471 Jy
! Component: 3800  -  total flux cleaned = -0.00722224 Jy
! Component: 3850  -  total flux cleaned = -0.00730782 Jy
! Component: 3900  -  total flux cleaned = -0.00737871 Jy
! Component: 3950  -  total flux cleaned = -0.00746319 Jy
! Component: 4000  -  total flux cleaned = -0.00753313 Jy
! Component: 4050  -  total flux cleaned = -0.00760267 Jy
! Total flux subtracted in 4096 components = -0.00767187 Jy
! Clean residual min=-0.000836 max=0.000941 Jy/beam
! Clean residual mean=-0.000008 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.271947 Jy
keep
! Adding 280 model components to the UV plane model.
! The established model now contains 531 components and 0.271947 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0343-2530_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.469 x 15.47 at -17.93 degrees (North through East)
! Clean map  min=-0.0021934  max=0.21636 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0343-2530_S_map.fits
wmodel /image_prod/ug002_uva//J0343-2530_S_map.mod
! Writing 531 model components to file: /image_prod/ug002_uva//J0343-2530_S_map.mod
wobs   /image_prod/ug002_uva//J0343-2530_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0343-2530_S_uvs.fits
wwins  /image_prod/ug002_uva//J0343-2530_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0343-2530_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.216363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000251836 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.349186 0.349186 0.698371 1.39674 2.79348 5.58697 11.1739 22.3479 44.6958 89.3915
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.216 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  859.142 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0343-2530_S_dfm.log closed on Wed Mar  4 20:01:26 2020