! Started logfile: /image_prod/ug002_uva//J0340-0254_S_dfm.log on Wed Mar  4 20:00:30 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0340-0254_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0340-0254_S_uva.fits
! AN table 1: 70 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.980159 visibilities/baseline/integration-bin.
! Found source: J0340-0254
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7410 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0340-0254_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021313Jy  sigma=8.411553
! Fit after  self-cal, rms=0.834649Jy  sigma=6.880622
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.896 mas, bmaj=14.41 mas, bpa=-17.65 degrees
! Estimated noise=1.42281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13105 Jy
! Component: 100  -  total flux cleaned = 0.179473 Jy
! Total flux subtracted in 100 components = 0.179473 Jy
! Clean residual min=-0.028163 max=0.066748 Jy/beam
! Clean residual mean=-0.000052 rms=0.006209 Jy/beam
! Combined flux in latest and established models = 0.179473 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.179473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125143Jy  sigma=0.916623
! Fit after  self-cal, rms=0.122960Jy  sigma=0.900725
! Inverting map 
! Added new window around map position (7, 5.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0600167 Jy
! Component: 100  -  total flux cleaned = 0.0792657 Jy
! Total flux subtracted in 100 components = 0.0792657 Jy
! Clean residual min=-0.015811 max=0.023917 Jy/beam
! Clean residual mean=-0.000038 rms=0.003533 Jy/beam
! Combined flux in latest and established models = 0.258739 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.258739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091895Jy  sigma=0.671476
! Fit after  self-cal, rms=0.086180Jy  sigma=0.624989
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211525 Jy
! Component: 100  -  total flux cleaned = 0.0204572 Jy
! Total flux subtracted in 100 components = 0.0204572 Jy
! Clean residual min=-0.008628 max=0.011276 Jy/beam
! Clean residual mean=-0.000024 rms=0.002433 Jy/beam
! Combined flux in latest and established models = 0.279196 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.279196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081001Jy  sigma=0.600626
! Fit after  self-cal, rms=0.080292Jy  sigma=0.595058
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.463 mas, bmaj=15.16 mas, bpa=-16.99 degrees
! Estimated noise=1.0342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00484327 Jy
! Component: 100  -  total flux cleaned = -0.00811922 Jy
! Component: 150  -  total flux cleaned = -0.0108364 Jy
! Component: 200  -  total flux cleaned = -0.0129568 Jy
! Total flux subtracted in 200 components = -0.0129568 Jy
! Clean residual min=-0.009220 max=0.010823 Jy/beam
! Clean residual mean=-0.000036 rms=0.002825 Jy/beam
! Combined flux in latest and established models = 0.266239 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 58 components and 0.266239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078593Jy  sigma=0.584916
! Fit after  self-cal, rms=0.078506Jy  sigma=0.584500
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.463 x 15.16 at -16.99 degrees (North through East)
! Clean map  min=-0.0091597  max=0.15328 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.10     HN        0.99     KP        0.92     
!   LA        1.25     MK        1.05     NL        0.94     OV        0.90     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.08     HN        0.98     KP        1.01     
!   LA        1.16     MK        1.04     NL        0.93     OV        0.93     
!   PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.00     KP        0.91     
!   LA        1.16     MK        1.04     NL        0.96     OV        0.93     
!   PT        0.96     
! 
! 
! Fit before self-cal, rms=0.078506Jy  sigma=0.584500
! Fit after  self-cal, rms=0.076342Jy  sigma=0.553723
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=14.9 mas, bpa=-16.9 degrees
! Estimated noise=1.03443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441066 Jy
! Component: 100  -  total flux cleaned = 0.0054027 Jy
! Component: 150  -  total flux cleaned = 0.00610967 Jy
! Component: 200  -  total flux cleaned = 0.00657169 Jy
! Total flux subtracted in 200 components = 0.00657169 Jy
! Clean residual min=-0.008192 max=0.007521 Jy/beam
! Clean residual mean=-0.000015 rms=0.002147 Jy/beam
! Combined flux in latest and established models = 0.272811 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 0.272811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075910Jy  sigma=0.551707
! Fit after  self-cal, rms=0.075881Jy  sigma=0.551212
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075881Jy  sigma=0.551212
! Fit after  self-cal, rms=0.072485Jy  sigma=0.493158
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=14.97 mas, bpa=-16.96 degrees
! Estimated noise=1.06825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692363 Jy
! Component: 100  -  total flux cleaned = 0.010623 Jy
! Component: 150  -  total flux cleaned = 0.0133336 Jy
! Component: 200  -  total flux cleaned = 0.0151916 Jy
! Total flux subtracted in 200 components = 0.0151916 Jy
! Clean residual min=-0.005004 max=0.004566 Jy/beam
! Clean residual mean=0.000001 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.288002 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 103 components and 0.288002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071720Jy  sigma=0.487260
! Fit after  self-cal, rms=0.071755Jy  sigma=0.486922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105377 Jy
! Component: 100  -  total flux cleaned = 0.00155704 Jy
! Component: 150  -  total flux cleaned = 0.00183563 Jy
! Component: 200  -  total flux cleaned = 0.00209113 Jy
! Total flux subtracted in 200 components = 0.00209113 Jy
! Clean residual min=-0.005014 max=0.004581 Jy/beam
! Clean residual mean=0.000002 rms=0.001248 Jy/beam
! Combined flux in latest and established models = 0.290093 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 119 components and 0.290093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071633Jy  sigma=0.486260
! Fit after  self-cal, rms=0.071624Jy  sigma=0.486208
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071624Jy  sigma=0.486208
! Fit after  self-cal, rms=0.068418Jy  sigma=0.454927
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=14.95 mas, bpa=-16.97 degrees
! Estimated noise=1.06414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000858137 Jy
! Component: 100  -  total flux cleaned = 0.000947629 Jy
! Component: 150  -  total flux cleaned = 0.000947923 Jy
! Component: 200  -  total flux cleaned = 0.00091196 Jy
! Total flux subtracted in 200 components = 0.00091196 Jy
! Clean residual min=-0.001783 max=0.002139 Jy/beam
! Clean residual mean=0.000005 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.291005 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 136 components and 0.291005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068346Jy  sigma=0.454501
! Fit after  self-cal, rms=0.068384Jy  sigma=0.454355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012027 Jy
! Component: 100  -  total flux cleaned = 8.91367e-05 Jy
! Component: 150  -  total flux cleaned = 8.9684e-05 Jy
! Component: 200  -  total flux cleaned = 0.000117731 Jy
! Total flux subtracted in 200 components = 0.000117731 Jy
! Clean residual min=-0.001819 max=0.002099 Jy/beam
! Clean residual mean=0.000005 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.291123 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 147 components and 0.291123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068346Jy  sigma=0.454204
! Fit after  self-cal, rms=0.068346Jy  sigma=0.454195
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068346Jy  sigma=0.454195
! Fit after  self-cal, rms=0.068233Jy  sigma=0.454144
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.662 mas, bmaj=15.65 mas, bpa=-9.47 degrees
! Estimated noise=1.26273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647243 Jy
! Component: 100  -  total flux cleaned = 0.000913606 Jy
! Component: 150  -  total flux cleaned = 0.00109318 Jy
! Component: 200  -  total flux cleaned = 0.0011764 Jy
! Total flux subtracted in 200 components = 0.0011764 Jy
! Clean residual min=-0.001940 max=0.002133 Jy/beam
! Clean residual mean=0.000006 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.292299 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 167 components and 0.292299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068220Jy  sigma=0.454067
! Fit after  self-cal, rms=0.068219Jy  sigma=0.454043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015248 Jy
! Component: 100  -  total flux cleaned = 0.000214573 Jy
! Component: 150  -  total flux cleaned = 0.000273474 Jy
! Component: 200  -  total flux cleaned = 0.000316055 Jy
! Total flux subtracted in 200 components = 0.000316055 Jy
! Clean residual min=-0.001935 max=0.002062 Jy/beam
! Clean residual mean=0.000006 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.292616 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 174 components and 0.292616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068213Jy  sigma=0.454036
! Fit after  self-cal, rms=0.068212Jy  sigma=0.454030
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=14.95 mas, bpa=-16.97 degrees
! Estimated noise=1.06268 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.484 x 14.95 at -16.97 degrees (North through East)
! Clean map  min=-0.001725  max=0.15446 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.934 mas, bmaj=14.25 mas, bpa=-17.59 degrees
! Estimated noise=1.44454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150517 Jy
! Component: 100  -  total flux cleaned = 0.218016 Jy
! Component: 150  -  total flux cleaned = 0.249594 Jy
! Component: 200  -  total flux cleaned = 0.265333 Jy
! Total flux subtracted in 200 components = 0.265333 Jy
! Clean residual min=-0.004370 max=0.007853 Jy/beam
! Clean residual mean=0.000010 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.265333 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.265333 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=14.95 mas, bpa=-16.97 degrees
! Estimated noise=1.06268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111794 Jy
! Component: 100  -  total flux cleaned = 0.0174905 Jy
! Component: 150  -  total flux cleaned = 0.0213029 Jy
! Component: 200  -  total flux cleaned = 0.0235801 Jy
! Total flux subtracted in 200 components = 0.0235801 Jy
! Clean residual min=-0.001965 max=0.002011 Jy/beam
! Clean residual mean=0.000005 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.288913 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 51 components and 0.288913 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.662 mas, bmaj=15.65 mas, bpa=-9.47 degrees
! Estimated noise=1.26273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207417 Jy
! Component: 100  -  total flux cleaned = 0.00285429 Jy
! Component: 150  -  total flux cleaned = 0.00313674 Jy
! Component: 200  -  total flux cleaned = 0.00324732 Jy
! Total flux subtracted in 200 components = 0.00324732 Jy
! Clean residual min=-0.001708 max=0.001893 Jy/beam
! Clean residual mean=0.000006 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.29216 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.30963e-05 Jy
! Component: 100  -  total flux cleaned = 0.000153592 Jy
! Component: 150  -  total flux cleaned = 0.000189244 Jy
! Component: 200  -  total flux cleaned = 0.000237843 Jy
! Total flux subtracted in 200 components = 0.000237843 Jy
! Clean residual min=-0.001748 max=0.001964 Jy/beam
! Clean residual mean=0.000006 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.292398 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 92 components and 0.292398 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=14.95 mas, bpa=-16.97 degrees
! Estimated noise=1.06268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104568 Jy
! Component: 100  -  total flux cleaned = -0.000234809 Jy
! Component: 150  -  total flux cleaned = -0.00038703 Jy
! Component: 200  -  total flux cleaned = -0.00048764 Jy
! Total flux subtracted in 200 components = -0.00048764 Jy
! Clean residual min=-0.001714 max=0.001924 Jy/beam
! Clean residual mean=0.000004 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.291911 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 112 components and 0.291911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068111Jy  sigma=0.453676
! Fit after  self-cal, rms=0.068094Jy  sigma=0.453518
wmodel J0340-0254_S_map.mod
! Writing 112 model components to file: J0340-0254_S_map.mod
wobs   J0340-0254_S_uvs.fits
! Writing UV FITS file: J0340-0254_S_uvs.fits
wwins  J0340-0254_S_map.win
! wwins: Wrote 2 windows to J0340-0254_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467782 Jy
! Component: 100  -  total flux cleaned = 0.000494308 Jy
! Component: 150  -  total flux cleaned = 0.000577095 Jy
! Component: 200  -  total flux cleaned = 0.000683013 Jy
! Component: 250  -  total flux cleaned = 0.000682399 Jy
! Component: 300  -  total flux cleaned = 0.000682239 Jy
! Component: 350  -  total flux cleaned = 0.000633716 Jy
! Component: 400  -  total flux cleaned = 0.000634183 Jy
! Component: 450  -  total flux cleaned = 0.000680184 Jy
! Component: 500  -  total flux cleaned = 0.000679765 Jy
! Component: 550  -  total flux cleaned = 0.000702062 Jy
! Component: 600  -  total flux cleaned = 0.000702496 Jy
! Component: 650  -  total flux cleaned = 0.000830334 Jy
! Component: 700  -  total flux cleaned = 0.000850969 Jy
! Component: 750  -  total flux cleaned = 0.000913042 Jy
! Component: 800  -  total flux cleaned = 0.000994251 Jy
! Component: 850  -  total flux cleaned = 0.00107394 Jy
! Component: 900  -  total flux cleaned = 0.00123025 Jy
! Component: 950  -  total flux cleaned = 0.00136469 Jy
! Component: 1000  -  total flux cleaned = 0.00144038 Jy
! Component: 1050  -  total flux cleaned = 0.00157143 Jy
! Component: 1100  -  total flux cleaned = 0.00168193 Jy
! Component: 1150  -  total flux cleaned = 0.00179087 Jy
! Component: 1200  -  total flux cleaned = 0.00191584 Jy
! Component: 1250  -  total flux cleaned = 0.00200379 Jy
! Component: 1300  -  total flux cleaned = 0.00210815 Jy
! Component: 1350  -  total flux cleaned = 0.00224529 Jy
! Component: 1400  -  total flux cleaned = 0.00234686 Jy
! Component: 1450  -  total flux cleaned = 0.00244712 Jy
! Component: 1500  -  total flux cleaned = 0.00254622 Jy
! Component: 1550  -  total flux cleaned = 0.00272545 Jy
! Component: 1600  -  total flux cleaned = 0.00282187 Jy
! Component: 1650  -  total flux cleaned = 0.00293317 Jy
! Component: 1700  -  total flux cleaned = 0.0030275 Jy
! Component: 1750  -  total flux cleaned = 0.00315194 Jy
! Component: 1800  -  total flux cleaned = 0.00315211 Jy
! Component: 1850  -  total flux cleaned = 0.0032741 Jy
! Component: 1900  -  total flux cleaned = 0.00337948 Jy
! Component: 1950  -  total flux cleaned = 0.00345393 Jy
! Component: 2000  -  total flux cleaned = 0.00352737 Jy
! Component: 2050  -  total flux cleaned = 0.00355617 Jy
! Component: 2100  -  total flux cleaned = 0.00355619 Jy
! Component: 2150  -  total flux cleaned = 0.00364177 Jy
! Component: 2200  -  total flux cleaned = 0.00364164 Jy
! Component: 2250  -  total flux cleaned = 0.00366962 Jy
! Component: 2300  -  total flux cleaned = 0.00372518 Jy
! Component: 2350  -  total flux cleaned = 0.00369783 Jy
! Component: 2400  -  total flux cleaned = 0.00376574 Jy
! Component: 2450  -  total flux cleaned = 0.00373879 Jy
! Component: 2500  -  total flux cleaned = 0.00372536 Jy
! Component: 2550  -  total flux cleaned = 0.00369895 Jy
! Component: 2600  -  total flux cleaned = 0.00369897 Jy
! Component: 2650  -  total flux cleaned = 0.00366006 Jy
! Component: 2700  -  total flux cleaned = 0.00364718 Jy
! Component: 2750  -  total flux cleaned = 0.00364736 Jy
! Component: 2800  -  total flux cleaned = 0.00367261 Jy
! Component: 2850  -  total flux cleaned = 0.00367254 Jy
! Component: 2900  -  total flux cleaned = 0.00366023 Jy
! Component: 2950  -  total flux cleaned = 0.00364794 Jy
! Component: 3000  -  total flux cleaned = 0.00366029 Jy
! Component: 3050  -  total flux cleaned = 0.00363604 Jy
! Component: 3100  -  total flux cleaned = 0.0036843 Jy
! Component: 3150  -  total flux cleaned = 0.0036723 Jy
! Component: 3200  -  total flux cleaned = 0.00373134 Jy
! Component: 3250  -  total flux cleaned = 0.00374301 Jy
! Component: 3300  -  total flux cleaned = 0.00376648 Jy
! Component: 3350  -  total flux cleaned = 0.00382444 Jy
! Component: 3400  -  total flux cleaned = 0.00380154 Jy
! Component: 3450  -  total flux cleaned = 0.00384707 Jy
! Component: 3500  -  total flux cleaned = 0.00384696 Jy
! Component: 3550  -  total flux cleaned = 0.00388073 Jy
! Component: 3600  -  total flux cleaned = 0.00388079 Jy
! Component: 3650  -  total flux cleaned = 0.00386992 Jy
! Component: 3700  -  total flux cleaned = 0.00389205 Jy
! Component: 3750  -  total flux cleaned = 0.00390304 Jy
! Component: 3800  -  total flux cleaned = 0.00391383 Jy
! Component: 3850  -  total flux cleaned = 0.00391368 Jy
! Component: 3900  -  total flux cleaned = 0.00390288 Jy
! Component: 3950  -  total flux cleaned = 0.00389225 Jy
! Component: 4000  -  total flux cleaned = 0.00392395 Jy
! Component: 4050  -  total flux cleaned = 0.00392405 Jy
! Total flux subtracted in 4096 components = 0.003945 Jy
! Clean residual min=-0.000654 max=0.000603 Jy/beam
! Clean residual mean=0.000002 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.295856 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 398 components and 0.295856 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0340-0254_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.484 x 14.95 at -16.97 degrees (North through East)
! Clean map  min=-0.0011575  max=0.15426 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0340-0254_S_map.fits
wmodel /image_prod/ug002_uva//J0340-0254_S_map.mod
! Writing 398 model components to file: /image_prod/ug002_uva//J0340-0254_S_map.mod
wobs   /image_prod/ug002_uva//J0340-0254_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0340-0254_S_uvs.fits
wwins  /image_prod/ug002_uva//J0340-0254_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0340-0254_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.154256 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000202103 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.393053 0.393053 0.786105 1.57221 3.14442 6.28884 12.5777 25.1554 50.3107
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.154 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  763.256 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0340-0254_S_dfm.log closed on Wed Mar  4 20:00:34 2020