! Started logfile: /image_prod/ug002_uva//J0336+3218_S_dfm.log on Wed Mar  4 19:58:21 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0336+3218_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0336+3218_S_uva.fits
! AN table 1: 90 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.736543 visibilities/baseline/integration-bin.
! Found source: J0336+3218
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8949 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0336+3218_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 133 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.243679Jy  sigma=7.737455
! Fit after  self-cal, rms=1.217422Jy  sigma=3.638912
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.741 mas, bmaj=5.024 mas, bpa=-3.769 degrees
! Estimated noise=2.77356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.20169 Jy
! Component: 100  -  total flux cleaned = 1.59167 Jy
! Total flux subtracted in 100 components = 1.59167 Jy
! Clean residual min=-0.119090 max=0.449900 Jy/beam
! Clean residual mean=-0.000272 rms=0.036924 Jy/beam
! Combined flux in latest and established models = 1.59167 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.59167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.883300Jy  sigma=2.659385
! Fit after  self-cal, rms=0.882327Jy  sigma=2.656701
! Inverting map 
! Added new window around map position (4, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.383615 Jy
! Component: 100  -  total flux cleaned = 0.584155 Jy
! Total flux subtracted in 100 components = 0.584155 Jy
! Clean residual min=-0.081741 max=0.110205 Jy/beam
! Clean residual mean=-0.000155 rms=0.022013 Jy/beam
! Combined flux in latest and established models = 2.17582 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 2.17582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.597003Jy  sigma=1.667550
! Fit after  self-cal, rms=0.574761Jy  sigma=1.541700
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170499 Jy
! Component: 100  -  total flux cleaned = 0.278363 Jy
! Total flux subtracted in 100 components = 0.278363 Jy
! Clean residual min=-0.064874 max=0.064293 Jy/beam
! Clean residual mean=-0.000095 rms=0.014940 Jy/beam
! Combined flux in latest and established models = 2.45418 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 41 components and 2.45418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.480091Jy  sigma=1.223195
! Fit after  self-cal, rms=0.476737Jy  sigma=1.200042
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=5.749 mas, bpa=-2.764 degrees
! Estimated noise=2.04773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118396 Jy
! Component: 100  -  total flux cleaned = 0.193129 Jy
! Component: 150  -  total flux cleaned = 0.244788 Jy
! Component: 200  -  total flux cleaned = 0.282211 Jy
! Total flux subtracted in 200 components = 0.282211 Jy
! Clean residual min=-0.058026 max=0.063197 Jy/beam
! Clean residual mean=-0.000031 rms=0.012367 Jy/beam
! Combined flux in latest and established models = 2.73639 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 76 components and 2.73639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.425475Jy  sigma=1.053435
! Fit after  self-cal, rms=0.424292Jy  sigma=1.043213
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.275 x 5.749 at -2.764 degrees (North through East)
! Clean map  min=-0.054806  max=1.6274 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        1.02     
!   LA        0.98     MK        1.08     NL        1.02     OV        1.06     
!   PT        0.97     SC        1.10     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.98     HN        1.01     KP        1.02     
!   LA        1.03     MK        1.00     NL        1.18     OV        0.78     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.00     KP        1.01     
!   LA        1.03     MK        1.05     NL        0.91     OV        1.00     
!   PT        1.01     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.424292Jy  sigma=1.043213
! Fit after  self-cal, rms=0.330476Jy  sigma=0.837962
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.331 mas, bmaj=5.785 mas, bpa=-2.55 degrees
! Estimated noise=2.06078 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.5, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0618854 Jy
! Component: 100  -  total flux cleaned = 0.0991357 Jy
! Component: 150  -  total flux cleaned = 0.12133 Jy
! Component: 200  -  total flux cleaned = 0.133251 Jy
! Total flux subtracted in 200 components = 0.133251 Jy
! Clean residual min=-0.039820 max=0.045298 Jy/beam
! Clean residual mean=0.000016 rms=0.009395 Jy/beam
! Combined flux in latest and established models = 2.86965 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 103 components and 2.86965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.311182Jy  sigma=0.778116
! Fit after  self-cal, rms=0.310351Jy  sigma=0.771050
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.310351Jy  sigma=0.771050
! Fit after  self-cal, rms=0.121628Jy  sigma=0.427856
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.323 mas, bmaj=5.817 mas, bpa=-2.011 degrees
! Estimated noise=2.04228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240577 Jy
! Component: 100  -  total flux cleaned = 0.0334794 Jy
! Component: 150  -  total flux cleaned = 0.0375355 Jy
! Component: 200  -  total flux cleaned = 0.0404664 Jy
! Total flux subtracted in 200 components = 0.0404664 Jy
! Clean residual min=-0.015462 max=0.017150 Jy/beam
! Clean residual mean=0.000026 rms=0.003799 Jy/beam
! Combined flux in latest and established models = 2.91011 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 126 components and 2.91011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112967Jy  sigma=0.399127
! Fit after  self-cal, rms=0.112480Jy  sigma=0.395381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (50, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011891 Jy
! Component: 100  -  total flux cleaned = 0.0161377 Jy
! Component: 150  -  total flux cleaned = 0.0174179 Jy
! Component: 200  -  total flux cleaned = 0.0185588 Jy
! Total flux subtracted in 200 components = 0.0185588 Jy
! Clean residual min=-0.014537 max=0.013746 Jy/beam
! Clean residual mean=0.000026 rms=0.003326 Jy/beam
! Combined flux in latest and established models = 2.92867 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 138 components and 2.92867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108403Jy  sigma=0.381329
! Fit after  self-cal, rms=0.108261Jy  sigma=0.380277
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108261Jy  sigma=0.380277
! Fit after  self-cal, rms=0.105890Jy  sigma=0.374889
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.319 mas, bmaj=5.82 mas, bpa=-1.888 degrees
! Estimated noise=2.03715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144687 Jy
! Component: 100  -  total flux cleaned = 0.0169812 Jy
! Component: 150  -  total flux cleaned = 0.0177027 Jy
! Component: 200  -  total flux cleaned = 0.0186617 Jy
! Total flux subtracted in 200 components = 0.0186617 Jy
! Clean residual min=-0.012044 max=0.011721 Jy/beam
! Clean residual mean=0.000010 rms=0.002806 Jy/beam
! Combined flux in latest and established models = 2.94733 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 151 components and 2.94733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102587Jy  sigma=0.363931
! Fit after  self-cal, rms=0.102433Jy  sigma=0.362662
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00433237 Jy
! Component: 100  -  total flux cleaned = 0.00467301 Jy
! Component: 150  -  total flux cleaned = 0.00605852 Jy
! Component: 200  -  total flux cleaned = 0.00656917 Jy
! Total flux subtracted in 200 components = 0.00656917 Jy
! Clean residual min=-0.011134 max=0.011137 Jy/beam
! Clean residual mean=0.000011 rms=0.002585 Jy/beam
! Combined flux in latest and established models = 2.9539 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 164 components and 2.9539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100734Jy  sigma=0.356899
! Fit after  self-cal, rms=0.100708Jy  sigma=0.356454
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100708Jy  sigma=0.356454
! Fit after  self-cal, rms=0.100004Jy  sigma=0.354366
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.87 mas, bmaj=8.86 mas, bpa=5.155 degrees
! Estimated noise=2.85191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135971 Jy
! Component: 100  -  total flux cleaned = 0.0175917 Jy
! Component: 150  -  total flux cleaned = 0.0190135 Jy
! Component: 200  -  total flux cleaned = 0.0196083 Jy
! Total flux subtracted in 200 components = 0.0196083 Jy
! Clean residual min=-0.009658 max=0.013124 Jy/beam
! Clean residual mean=0.000003 rms=0.002726 Jy/beam
! Combined flux in latest and established models = 2.97351 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 179 components and 2.97351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098846Jy  sigma=0.352370
! Fit after  self-cal, rms=0.098667Jy  sigma=0.351018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (65, -98).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859595 Jy
! Component: 100  -  total flux cleaned = 0.0120522 Jy
! Component: 150  -  total flux cleaned = 0.0136727 Jy
! Component: 200  -  total flux cleaned = 0.0146838 Jy
! Total flux subtracted in 200 components = 0.0146838 Jy
! Clean residual min=-0.009488 max=0.008426 Jy/beam
! Clean residual mean=0.000021 rms=0.002336 Jy/beam
! Combined flux in latest and established models = 2.98819 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 217 components and 2.98819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097631Jy  sigma=0.347685
! Fit after  self-cal, rms=0.097544Jy  sigma=0.347136
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=5.823 mas, bpa=-1.79 degrees
! Estimated noise=2.03484 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.315 x 5.823 at -1.79 degrees (North through East)
! Clean map  min=-0.0091472  max=1.6155 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097544Jy  sigma=0.347136
! Fit after  self-cal, rms=0.074491Jy  sigma=0.260410
! Inverting map and beam 
! Estimated beam: bmin=3.319 mas, bmaj=5.827 mas, bpa=-1.802 degrees
! Estimated noise=2.03306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00467745 Jy
! Component: 100  -  total flux cleaned = 0.0068046 Jy
! Component: 150  -  total flux cleaned = 0.00844972 Jy
! Component: 200  -  total flux cleaned = 0.00887776 Jy
! Total flux subtracted in 200 components = 0.00887776 Jy
! Clean residual min=-0.008596 max=0.008293 Jy/beam
! Clean residual mean=0.000011 rms=0.001942 Jy/beam
! Combined flux in latest and established models = 2.99707 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 233 components and 2.99707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072774Jy  sigma=0.254078
! Fit after  self-cal, rms=0.072702Jy  sigma=0.253805
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129705 Jy
! Component: 100  -  total flux cleaned = 0.00168389 Jy
! Component: 150  -  total flux cleaned = 0.00149826 Jy
! Component: 200  -  total flux cleaned = 0.00167028 Jy
! Total flux subtracted in 200 components = 0.00167028 Jy
! Clean residual min=-0.008081 max=0.007615 Jy/beam
! Clean residual mean=0.000011 rms=0.001841 Jy/beam
! Combined flux in latest and established models = 2.99874 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 250 components and 2.99874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071783Jy  sigma=0.250342
! Fit after  self-cal, rms=0.071759Jy  sigma=0.250249
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071759Jy  sigma=0.250249
! Fit after  self-cal, rms=0.071301Jy  sigma=0.249355
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.788 mas, bmaj=5.089 mas, bpa=-2.639 degrees
! Estimated noise=2.79241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.23094 Jy
! Component: 100  -  total flux cleaned = 1.73798 Jy
! Component: 150  -  total flux cleaned = 2.04132 Jy
! Component: 200  -  total flux cleaned = 2.24637 Jy
! Total flux subtracted in 200 components = 2.24637 Jy
! Clean residual min=-0.048993 max=0.116583 Jy/beam
! Clean residual mean=-0.000119 rms=0.014198 Jy/beam
! Combined flux in latest and established models = 2.24637 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.24637 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=5.828 mas, bpa=-1.695 degrees
! Estimated noise=2.03145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187271 Jy
! Component: 100  -  total flux cleaned = 0.30543 Jy
! Component: 150  -  total flux cleaned = 0.387486 Jy
! Component: 200  -  total flux cleaned = 0.449052 Jy
! Total flux subtracted in 200 components = 0.449052 Jy
! Clean residual min=-0.017527 max=0.037616 Jy/beam
! Clean residual mean=-0.000078 rms=0.006104 Jy/beam
! Combined flux in latest and established models = 2.69542 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 51 components and 2.69542 Jy
! Inverting map 
! Added new window around map position (7, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0469581 Jy
! Component: 100  -  total flux cleaned = 0.0833516 Jy
! Component: 150  -  total flux cleaned = 0.112865 Jy
! Component: 200  -  total flux cleaned = 0.137318 Jy
! Total flux subtracted in 200 components = 0.137318 Jy
! Clean residual min=-0.011563 max=0.014812 Jy/beam
! Clean residual mean=-0.000032 rms=0.003450 Jy/beam
! Combined flux in latest and established models = 2.83274 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 105 components and 2.83274 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204692 Jy
! Component: 100  -  total flux cleaned = 0.0377572 Jy
! Component: 150  -  total flux cleaned = 0.0526177 Jy
! Component: 200  -  total flux cleaned = 0.0656267 Jy
! Total flux subtracted in 200 components = 0.0656267 Jy
! Clean residual min=-0.009254 max=0.010431 Jy/beam
! Clean residual mean=-0.000013 rms=0.002514 Jy/beam
! Combined flux in latest and established models = 2.89836 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 139 components and 2.89836 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.859 mas, bmaj=8.861 mas, bpa=5.273 degrees
! Estimated noise=2.84853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205993 Jy
! Component: 100  -  total flux cleaned = 0.0355039 Jy
! Component: 150  -  total flux cleaned = 0.0473503 Jy
! Component: 200  -  total flux cleaned = 0.057135 Jy
! Total flux subtracted in 200 components = 0.057135 Jy
! Clean residual min=-0.008831 max=0.008916 Jy/beam
! Clean residual mean=0.000000 rms=0.002542 Jy/beam
! Combined flux in latest and established models = 2.9555 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00760153 Jy
! Component: 100  -  total flux cleaned = 0.0135254 Jy
! Component: 150  -  total flux cleaned = 0.0186621 Jy
! Component: 200  -  total flux cleaned = 0.0221175 Jy
! Total flux subtracted in 200 components = 0.0221175 Jy
! Clean residual min=-0.008266 max=0.007904 Jy/beam
! Clean residual mean=0.000011 rms=0.002138 Jy/beam
! Combined flux in latest and established models = 2.97762 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 226 components and 2.97761 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=5.828 mas, bpa=-1.695 degrees
! Estimated noise=2.03145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455616 Jy
! Component: 100  -  total flux cleaned = 0.00716417 Jy
! Component: 150  -  total flux cleaned = 0.00926061 Jy
! Component: 200  -  total flux cleaned = 0.01053 Jy
! Total flux subtracted in 200 components = 0.01053 Jy
! Clean residual min=-0.008580 max=0.008905 Jy/beam
! Clean residual mean=0.000002 rms=0.001744 Jy/beam
! Combined flux in latest and established models = 2.98814 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 253 components and 2.98814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070700Jy  sigma=0.245866
! Fit after  self-cal, rms=0.069888Jy  sigma=0.241913
wmodel J0336+3218_S_map.mod
! Writing 253 model components to file: J0336+3218_S_map.mod
wobs   J0336+3218_S_uvs.fits
! Writing UV FITS file: J0336+3218_S_uvs.fits
wwins  J0336+3218_S_map.win
! wwins: Wrote 6 windows to J0336+3218_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120067 Jy
! Component: 100  -  total flux cleaned = 0.00155696 Jy
! Component: 150  -  total flux cleaned = 0.00233674 Jy
! Component: 200  -  total flux cleaned = 0.0031903 Jy
! Component: 250  -  total flux cleaned = 0.00381043 Jy
! Component: 300  -  total flux cleaned = 0.00480234 Jy
! Component: 350  -  total flux cleaned = 0.00556704 Jy
! Component: 400  -  total flux cleaned = 0.00649401 Jy
! Component: 450  -  total flux cleaned = 0.00748123 Jy
! Component: 500  -  total flux cleaned = 0.00834979 Jy
! Component: 550  -  total flux cleaned = 0.00911206 Jy
! Component: 600  -  total flux cleaned = 0.00985408 Jy
! Component: 650  -  total flux cleaned = 0.0103358 Jy
! Component: 700  -  total flux cleaned = 0.0112775 Jy
! Component: 750  -  total flux cleaned = 0.011968 Jy
! Component: 800  -  total flux cleaned = 0.0127178 Jy
! Component: 850  -  total flux cleaned = 0.0132322 Jy
! Component: 900  -  total flux cleaned = 0.0138088 Jy
! Component: 950  -  total flux cleaned = 0.0144445 Jy
! Component: 1000  -  total flux cleaned = 0.0147895 Jy
! Component: 1050  -  total flux cleaned = 0.0151266 Jy
! Component: 1100  -  total flux cleaned = 0.0154559 Jy
! Component: 1150  -  total flux cleaned = 0.0155207 Jy
! Component: 1200  -  total flux cleaned = 0.015906 Jy
! Component: 1250  -  total flux cleaned = 0.0163466 Jy
! Component: 1300  -  total flux cleaned = 0.0166551 Jy
! Component: 1350  -  total flux cleaned = 0.0170784 Jy
! Component: 1400  -  total flux cleaned = 0.0174353 Jy
! Component: 1450  -  total flux cleaned = 0.0178452 Jy
! Component: 1500  -  total flux cleaned = 0.0179036 Jy
! Component: 1550  -  total flux cleaned = 0.0184115 Jy
! Component: 1600  -  total flux cleaned = 0.0186328 Jy
! Component: 1650  -  total flux cleaned = 0.0189055 Jy
! Component: 1700  -  total flux cleaned = 0.0192283 Jy
! Component: 1750  -  total flux cleaned = 0.0193343 Jy
! Component: 1800  -  total flux cleaned = 0.0195948 Jy
! Component: 1850  -  total flux cleaned = 0.0197472 Jy
! Component: 1900  -  total flux cleaned = 0.0199486 Jy
! Component: 1950  -  total flux cleaned = 0.0201465 Jy
! Component: 2000  -  total flux cleaned = 0.0201954 Jy
! Component: 2050  -  total flux cleaned = 0.0204361 Jy
! Component: 2100  -  total flux cleaned = 0.0205788 Jy
! Component: 2150  -  total flux cleaned = 0.02072 Jy
! Component: 2200  -  total flux cleaned = 0.0209047 Jy
! Component: 2250  -  total flux cleaned = 0.0210414 Jy
! Component: 2300  -  total flux cleaned = 0.0211322 Jy
! Component: 2350  -  total flux cleaned = 0.0213996 Jy
! Component: 2400  -  total flux cleaned = 0.0214857 Jy
! Component: 2450  -  total flux cleaned = 0.0215713 Jy
! Component: 2500  -  total flux cleaned = 0.0218269 Jy
! Component: 2550  -  total flux cleaned = 0.0219533 Jy
! Component: 2600  -  total flux cleaned = 0.0221605 Jy
! Component: 2650  -  total flux cleaned = 0.0220783 Jy
! Component: 2700  -  total flux cleaned = 0.0223619 Jy
! Component: 2750  -  total flux cleaned = 0.0224819 Jy
! Component: 2800  -  total flux cleaned = 0.0225217 Jy
! Component: 2850  -  total flux cleaned = 0.0225995 Jy
! Component: 2900  -  total flux cleaned = 0.0226003 Jy
! Component: 2950  -  total flux cleaned = 0.022829 Jy
! Component: 3000  -  total flux cleaned = 0.0229418 Jy
! Component: 3050  -  total flux cleaned = 0.0228309 Jy
! Component: 3100  -  total flux cleaned = 0.0230151 Jy
! Component: 3150  -  total flux cleaned = 0.023197 Jy
! Component: 3200  -  total flux cleaned = 0.0231607 Jy
! Component: 3250  -  total flux cleaned = 0.0230539 Jy
! Component: 3300  -  total flux cleaned = 0.023265 Jy
! Component: 3350  -  total flux cleaned = 0.0233346 Jy
! Component: 3400  -  total flux cleaned = 0.0233688 Jy
! Component: 3450  -  total flux cleaned = 0.023505 Jy
! Component: 3500  -  total flux cleaned = 0.0234038 Jy
! Component: 3550  -  total flux cleaned = 0.0234367 Jy
! Component: 3600  -  total flux cleaned = 0.0236665 Jy
! Component: 3650  -  total flux cleaned = 0.0236657 Jy
! Component: 3700  -  total flux cleaned = 0.0237627 Jy
! Component: 3750  -  total flux cleaned = 0.0237629 Jy
! Component: 3800  -  total flux cleaned = 0.0238576 Jy
! Component: 3850  -  total flux cleaned = 0.0239822 Jy
! Component: 3900  -  total flux cleaned = 0.0239823 Jy
! Component: 3950  -  total flux cleaned = 0.0240134 Jy
! Component: 4000  -  total flux cleaned = 0.0241044 Jy
! Component: 4050  -  total flux cleaned = 0.0241942 Jy
! Total flux subtracted in 4096 components = 0.0243722 Jy
! Clean residual min=-0.001733 max=0.001592 Jy/beam
! Clean residual mean=0.000004 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 3.01252 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 565 components and 3.01252 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0336+3218_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.315 x 5.828 at -1.695 degrees (North through East)
! Clean map  min=-0.0034477  max=1.6204 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0336+3218_S_map.fits
wmodel /image_prod/ug002_uva//J0336+3218_S_map.mod
! Writing 565 model components to file: /image_prod/ug002_uva//J0336+3218_S_map.mod
wobs   /image_prod/ug002_uva//J0336+3218_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0336+3218_S_uvs.fits
wwins  /image_prod/ug002_uva//J0336+3218_S_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0336+3218_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.62039 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000542271 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.100396 0.100396 0.200793 0.401586 0.803172 1.60634 3.21269 6.42537 12.8507 25.7015 51.403
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.62 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2988.15 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0336+3218_S_dfm.log closed on Wed Mar  4 19:58:25 2020