! Started logfile: /image_prod/ug002_uva//J0334+0226_S_dfm.log on Wed Mar 4 19:57:42 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0334+0226_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0334+0226_S_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.851852 visibilities/baseline/integration-bin. ! Found source: J0334+0226 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 8280 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0334+0226_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002044Jy sigma=8.874778 ! Fit after self-cal, rms=0.964124Jy sigma=8.545121 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=7.773 mas, bpa=-6.737 degrees ! Estimated noise=1.48642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294385 Jy ! Component: 100 - total flux cleaned = 0.0359536 Jy ! Total flux subtracted in 100 components = 0.0359536 Jy ! Clean residual min=-0.003506 max=0.003181 Jy/beam ! Clean residual mean=-0.000003 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0359536 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0359536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060798Jy sigma=0.474398 ! Fit after self-cal, rms=0.059373Jy sigma=0.459977 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.929 mas, bpa=-6.127 degrees ! Estimated noise=0.903787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036079 Jy ! Component: 100 - total flux cleaned = 0.00373632 Jy ! Component: 150 - total flux cleaned = 0.00373312 Jy ! Component: 200 - total flux cleaned = 0.0037732 Jy ! Total flux subtracted in 200 components = 0.0037732 Jy ! Clean residual min=-0.002264 max=0.002007 Jy/beam ! Clean residual mean=-0.000007 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0397268 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.0397268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059135Jy sigma=0.457712 ! Fit after self-cal, rms=0.059089Jy sigma=0.457644 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 8.929 at -6.127 degrees (North through East) ! Clean map min=-0.0022524 max=0.04042 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.87 KP 1.04 ! LA 1.06 MK 1.08 OV 0.78 PT 1.02 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 1.00 KP 1.07 ! LA 1.05 MK 1.05 OV 0.90 PT 0.97 ! SC 0.74 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 0.95 KP 1.04 ! LA 1.08 MK 0.97 OV 0.93 PT 1.02 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.059089Jy sigma=0.457644 ! Fit after self-cal, rms=0.057632Jy sigma=0.455316 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.755 mas, bpa=-5.07 degrees ! Estimated noise=0.887847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464959 Jy ! Component: 100 - total flux cleaned = 0.000465354 Jy ! Component: 150 - total flux cleaned = 0.000444904 Jy ! Component: 200 - total flux cleaned = 0.000428089 Jy ! Total flux subtracted in 200 components = 0.000428089 Jy ! Clean residual min=-0.001822 max=0.001661 Jy/beam ! Clean residual mean=-0.000007 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0401549 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0401549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057615Jy sigma=0.455119 ! Fit after self-cal, rms=0.057677Jy sigma=0.454689 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057677Jy sigma=0.454689 ! Fit after self-cal, rms=0.057740Jy sigma=0.453506 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=8.683 mas, bpa=-4.852 degrees ! Estimated noise=0.884352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036958 Jy ! Component: 100 - total flux cleaned = 0.000369686 Jy ! Component: 150 - total flux cleaned = 0.000369229 Jy ! Component: 200 - total flux cleaned = 0.000356737 Jy ! Total flux subtracted in 200 components = 0.000356737 Jy ! Clean residual min=-0.001881 max=0.001535 Jy/beam ! Clean residual mean=-0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0405116 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0405116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057731Jy sigma=0.453402 ! Fit after self-cal, rms=0.057717Jy sigma=0.453007 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.58507e-05 Jy ! Component: 100 - total flux cleaned = -6.1738e-05 Jy ! Component: 150 - total flux cleaned = -6.18313e-05 Jy ! Component: 200 - total flux cleaned = -6.16074e-05 Jy ! Total flux subtracted in 200 components = -6.16074e-05 Jy ! Clean residual min=-0.001863 max=0.001476 Jy/beam ! Clean residual mean=-0.000005 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.04045 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.04045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057712Jy sigma=0.452945 ! Fit after self-cal, rms=0.057712Jy sigma=0.452925 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057712Jy sigma=0.452925 ! Fit after self-cal, rms=0.057771Jy sigma=0.452725 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.632 mas, bpa=-4.78 degrees ! Estimated noise=0.876133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152458 Jy ! Component: 100 - total flux cleaned = 0.000152439 Jy ! Component: 150 - total flux cleaned = 0.000165016 Jy ! Component: 200 - total flux cleaned = 0.000164728 Jy ! Total flux subtracted in 200 components = 0.000164728 Jy ! Clean residual min=-0.001839 max=0.001433 Jy/beam ! Clean residual mean=-0.000004 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0406148 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0406148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057764Jy sigma=0.452665 ! Fit after self-cal, rms=0.057768Jy sigma=0.452499 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.89784e-05 Jy ! Component: 100 - total flux cleaned = -8.38196e-05 Jy ! Component: 150 - total flux cleaned = -9.44325e-05 Jy ! Component: 200 - total flux cleaned = -8.45288e-05 Jy ! Total flux subtracted in 200 components = -8.45288e-05 Jy ! Clean residual min=-0.001831 max=0.001448 Jy/beam ! Clean residual mean=-0.000005 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0405302 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0405302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057762Jy sigma=0.452451 ! Fit after self-cal, rms=0.057760Jy sigma=0.452441 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057760Jy sigma=0.452441 ! Fit after self-cal, rms=0.057326Jy sigma=0.452403 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.811 mas, bmaj=14.17 mas, bpa=-1.976 degrees ! Estimated noise=1.11907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301685 Jy ! Component: 100 - total flux cleaned = 0.000322156 Jy ! Component: 150 - total flux cleaned = 0.00034054 Jy ! Component: 200 - total flux cleaned = 0.000348873 Jy ! Total flux subtracted in 200 components = 0.000348873 Jy ! Clean residual min=-0.002102 max=0.001830 Jy/beam ! Clean residual mean=-0.000009 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0408791 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0408791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057323Jy sigma=0.452396 ! Fit after self-cal, rms=0.057329Jy sigma=0.452374 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.252e-05 Jy ! Component: 100 - total flux cleaned = 2.45942e-06 Jy ! Component: 150 - total flux cleaned = 2.19065e-06 Jy ! Component: 200 - total flux cleaned = 9.06258e-06 Jy ! Total flux subtracted in 200 components = 9.06258e-06 Jy ! Clean residual min=-0.002096 max=0.001833 Jy/beam ! Clean residual mean=-0.000009 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0408882 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0408882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057328Jy sigma=0.452381 ! Fit after self-cal, rms=0.057365Jy sigma=0.452333 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.589 mas, bpa=-4.741 degrees ! Estimated noise=0.868392 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.068 x 8.589 at -4.741 degrees (North through East) ! Clean map min=-0.001678 max=0.039525 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=7.508 mas, bpa=-5.292 degrees ! Estimated noise=1.39792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295868 Jy ! Component: 100 - total flux cleaned = 0.0361151 Jy ! Component: 150 - total flux cleaned = 0.0369371 Jy ! Component: 200 - total flux cleaned = 0.0375105 Jy ! Total flux subtracted in 200 components = 0.0375105 Jy ! Clean residual min=-0.003096 max=0.002599 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0375105 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0375105 Jy ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.589 mas, bpa=-4.741 degrees ! Estimated noise=0.868392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227751 Jy ! Component: 100 - total flux cleaned = 0.00334207 Jy ! Component: 150 - total flux cleaned = 0.00343537 Jy ! Component: 200 - total flux cleaned = 0.00348825 Jy ! Total flux subtracted in 200 components = 0.00348825 Jy ! Clean residual min=-0.001797 max=0.001279 Jy/beam ! Clean residual mean=-0.000005 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0409987 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0409987 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.811 mas, bmaj=14.17 mas, bpa=-1.976 degrees ! Estimated noise=1.11907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101382 Jy ! Component: 100 - total flux cleaned = 9.98937e-05 Jy ! Component: 150 - total flux cleaned = 8.6325e-05 Jy ! Component: 200 - total flux cleaned = 8.63598e-05 Jy ! Total flux subtracted in 200 components = 8.63598e-05 Jy ! Clean residual min=-0.002083 max=0.001709 Jy/beam ! Clean residual mean=-0.000009 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0410851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02349e-05 Jy ! Component: 100 - total flux cleaned = -1.00333e-05 Jy ! Component: 150 - total flux cleaned = -2.21899e-06 Jy ! Component: 200 - total flux cleaned = -2.2416e-06 Jy ! Total flux subtracted in 200 components = -2.2416e-06 Jy ! Clean residual min=-0.002063 max=0.001717 Jy/beam ! Clean residual mean=-0.000009 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0410828 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.0410828 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.589 mas, bpa=-4.741 degrees ! Estimated noise=0.868392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.18634e-05 Jy ! Component: 100 - total flux cleaned = -4.35508e-05 Jy ! Component: 150 - total flux cleaned = -1.07627e-05 Jy ! Component: 200 - total flux cleaned = 1.87503e-05 Jy ! Total flux subtracted in 200 components = 1.87503e-05 Jy ! Clean residual min=-0.001769 max=0.001269 Jy/beam ! Clean residual mean=-0.000005 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0411016 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.0411016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057321Jy sigma=0.452175 ! Fit after self-cal, rms=0.057297Jy sigma=0.452093 wmodel J0334+0226_S_map.mod ! Writing 59 model components to file: J0334+0226_S_map.mod wobs J0334+0226_S_uvs.fits ! Writing UV FITS file: J0334+0226_S_uvs.fits wwins J0334+0226_S_map.win ! wwins: Wrote 2 windows to J0334+0226_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000744583 Jy ! Component: 100 - total flux cleaned = -0.00112939 Jy ! Component: 150 - total flux cleaned = -0.00134132 Jy ! Component: 200 - total flux cleaned = -0.0015635 Jy ! Component: 250 - total flux cleaned = -0.00177586 Jy ! Component: 300 - total flux cleaned = -0.00185758 Jy ! Component: 350 - total flux cleaned = -0.00193627 Jy ! Component: 400 - total flux cleaned = -0.00199348 Jy ! Component: 450 - total flux cleaned = -0.00201207 Jy ! Component: 500 - total flux cleaned = -0.00204853 Jy ! Component: 550 - total flux cleaned = -0.00203092 Jy ! Component: 600 - total flux cleaned = -0.00210135 Jy ! Component: 650 - total flux cleaned = -0.00211867 Jy ! Component: 700 - total flux cleaned = -0.00216919 Jy ! Component: 750 - total flux cleaned = -0.00213616 Jy ! Component: 800 - total flux cleaned = -0.00218464 Jy ! Component: 850 - total flux cleaned = -0.00220031 Jy ! Component: 900 - total flux cleaned = -0.00218476 Jy ! Component: 950 - total flux cleaned = -0.00223099 Jy ! Component: 1000 - total flux cleaned = -0.00224609 Jy ! Component: 1050 - total flux cleaned = -0.00232056 Jy ! Component: 1100 - total flux cleaned = -0.00234951 Jy ! Component: 1150 - total flux cleaned = -0.00240682 Jy ! Component: 1200 - total flux cleaned = -0.00240641 Jy ! Component: 1250 - total flux cleaned = -0.00244822 Jy ! Component: 1300 - total flux cleaned = -0.0025034 Jy ! Component: 1350 - total flux cleaned = -0.00253059 Jy ! Component: 1400 - total flux cleaned = -0.00253064 Jy ! Component: 1450 - total flux cleaned = -0.00255719 Jy ! Component: 1500 - total flux cleaned = -0.00255718 Jy ! Component: 1550 - total flux cleaned = -0.00255723 Jy ! Component: 1600 - total flux cleaned = -0.0025699 Jy ! Component: 1650 - total flux cleaned = -0.00257017 Jy ! Component: 1700 - total flux cleaned = -0.00258268 Jy ! Component: 1750 - total flux cleaned = -0.00257051 Jy ! Component: 1800 - total flux cleaned = -0.00258274 Jy ! Component: 1850 - total flux cleaned = -0.00259451 Jy ! Component: 1900 - total flux cleaned = -0.00259437 Jy ! Component: 1950 - total flux cleaned = -0.00258264 Jy ! Component: 2000 - total flux cleaned = -0.0025363 Jy ! Component: 2050 - total flux cleaned = -0.00255926 Jy ! Component: 2100 - total flux cleaned = -0.00255909 Jy ! Component: 2150 - total flux cleaned = -0.00255903 Jy ! Component: 2200 - total flux cleaned = -0.00253675 Jy ! Component: 2250 - total flux cleaned = -0.00249289 Jy ! Component: 2300 - total flux cleaned = -0.00249288 Jy ! Component: 2350 - total flux cleaned = -0.0024713 Jy ! Component: 2400 - total flux cleaned = -0.00250345 Jy ! Component: 2450 - total flux cleaned = -0.00246116 Jy ! Component: 2500 - total flux cleaned = -0.00250304 Jy ! Component: 2550 - total flux cleaned = -0.00251328 Jy ! Component: 2600 - total flux cleaned = -0.00248233 Jy ! Component: 2650 - total flux cleaned = -0.00244176 Jy ! Component: 2700 - total flux cleaned = -0.00241174 Jy ! Component: 2750 - total flux cleaned = -0.00241175 Jy ! Component: 2800 - total flux cleaned = -0.00240197 Jy ! Component: 2850 - total flux cleaned = -0.00241182 Jy ! Component: 2900 - total flux cleaned = -0.00239252 Jy ! Component: 2950 - total flux cleaned = -0.00240221 Jy ! Component: 3000 - total flux cleaned = -0.00239265 Jy ! Component: 3050 - total flux cleaned = -0.00233597 Jy ! Component: 3100 - total flux cleaned = -0.00238291 Jy ! Component: 3150 - total flux cleaned = -0.00235508 Jy ! Component: 3200 - total flux cleaned = -0.00240134 Jy ! Component: 3250 - total flux cleaned = -0.00239214 Jy ! Component: 3300 - total flux cleaned = -0.00236491 Jy ! Component: 3350 - total flux cleaned = -0.00236497 Jy ! Component: 3400 - total flux cleaned = -0.00240075 Jy ! Component: 3450 - total flux cleaned = -0.00241843 Jy ! Component: 3500 - total flux cleaned = -0.00238326 Jy ! Component: 3550 - total flux cleaned = -0.00238329 Jy ! Component: 3600 - total flux cleaned = -0.00237473 Jy ! Component: 3650 - total flux cleaned = -0.0023919 Jy ! Component: 3700 - total flux cleaned = -0.002375 Jy ! Component: 3750 - total flux cleaned = -0.00240044 Jy ! Component: 3800 - total flux cleaned = -0.00239197 Jy ! Component: 3850 - total flux cleaned = -0.00241684 Jy ! Component: 3900 - total flux cleaned = -0.00240838 Jy ! Component: 3950 - total flux cleaned = -0.00239199 Jy ! Component: 4000 - total flux cleaned = -0.00234295 Jy ! Component: 4050 - total flux cleaned = -0.00232679 Jy ! Total flux subtracted in 4096 components = -0.00230268 Jy ! Clean residual min=-0.000476 max=0.000453 Jy/beam ! Clean residual mean=-0.000002 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.0387989 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 347 components and 0.0387989 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0334+0226_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.068 x 8.589 at -4.741 degrees (North through East) ! Clean map min=-0.0014076 max=0.038938 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0334+0226_S_map.fits wmodel /image_prod/ug002_uva//J0334+0226_S_map.mod ! Writing 347 model components to file: /image_prod/ug002_uva//J0334+0226_S_map.mod wobs /image_prod/ug002_uva//J0334+0226_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0334+0226_S_uvs.fits wwins /image_prod/ug002_uva//J0334+0226_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0334+0226_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0389377 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146397 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12794 1.12794 2.25587 4.51174 9.02348 18.047 36.0939 72.1878 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.038 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 265.972 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0334+0226_S_dfm.log closed on Wed Mar 4 19:57:46 2020