! Started logfile: /image_prod/ug002_uva//J0330+4656_S_dfm.log on Wed Mar  4 19:56:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0330+4656_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0330+4656_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.787037 visibilities/baseline/integration-bin.
! Found source: J0330+4656
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5100 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0330+4656_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.989086Jy  sigma=8.921234
! Fit after  self-cal, rms=0.868190Jy  sigma=7.784602
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.79 mas, bmaj=5.248 mas, bpa=5.747 degrees
! Estimated noise=1.61903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100372 Jy
! Component: 100  -  total flux cleaned = 0.135023 Jy
! Total flux subtracted in 100 components = 0.135023 Jy
! Clean residual min=-0.006325 max=0.014580 Jy/beam
! Clean residual mean=-0.000030 rms=0.001964 Jy/beam
! Combined flux in latest and established models = 0.135024 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.135024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060306Jy  sigma=0.535273
! Fit after  self-cal, rms=0.060158Jy  sigma=0.534013
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163347 Jy
! Component: 100  -  total flux cleaned = 0.025821 Jy
! Total flux subtracted in 100 components = 0.025821 Jy
! Clean residual min=-0.004753 max=0.007817 Jy/beam
! Clean residual mean=-0.000017 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.160844 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 0.160844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054645Jy  sigma=0.475363
! Fit after  self-cal, rms=0.054562Jy  sigma=0.474824
! Inverting map 
! Added new window around map position (-4.5, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00831539 Jy
! Component: 100  -  total flux cleaned = 0.0136721 Jy
! Total flux subtracted in 100 components = 0.0136721 Jy
! Clean residual min=-0.004122 max=0.004407 Jy/beam
! Clean residual mean=-0.000010 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.174517 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.174517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053117Jy  sigma=0.458944
! Fit after  self-cal, rms=0.053008Jy  sigma=0.458110
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=6.103 mas, bpa=7.08 degrees
! Estimated noise=1.11487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0061689 Jy
! Component: 100  -  total flux cleaned = 0.0101205 Jy
! Component: 150  -  total flux cleaned = 0.0129587 Jy
! Component: 200  -  total flux cleaned = 0.0150747 Jy
! Total flux subtracted in 200 components = 0.0150747 Jy
! Clean residual min=-0.002442 max=0.003175 Jy/beam
! Clean residual mean=-0.000006 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.189591 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 87 components and 0.189591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052221Jy  sigma=0.449541
! Fit after  self-cal, rms=0.052173Jy  sigma=0.449159
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.348 x 6.103 at 7.08 degrees (North through East)
! Clean map  min=-0.0023614  max=0.13148 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.04     KP        0.98     LA        1.02     
!   MK        1.00     NL        0.99     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.06     KP        0.97     LA        1.00     
!   MK        1.00     NL        0.95     OV        1.02     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.04     KP        0.96     LA        0.98     
!   MK        0.99     NL        1.01     OV        0.99     PT        1.01     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.052173Jy  sigma=0.449159
! Fit after  self-cal, rms=0.051885Jy  sigma=0.446863
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.358 mas, bmaj=6.13 mas, bpa=7.313 degrees
! Estimated noise=1.11039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000708574 Jy
! Component: 100  -  total flux cleaned = 0.00101292 Jy
! Component: 150  -  total flux cleaned = 0.00132449 Jy
! Component: 200  -  total flux cleaned = 0.00153758 Jy
! Total flux subtracted in 200 components = 0.00153758 Jy
! Clean residual min=-0.002179 max=0.002734 Jy/beam
! Clean residual mean=-0.000002 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.191129 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.191129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051839Jy  sigma=0.446381
! Fit after  self-cal, rms=0.051841Jy  sigma=0.446321
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051841Jy  sigma=0.446321
! Fit after  self-cal, rms=0.051492Jy  sigma=0.443246
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.356 mas, bmaj=6.142 mas, bpa=7.056 degrees
! Estimated noise=1.11079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122139 Jy
! Component: 100  -  total flux cleaned = 0.000366321 Jy
! Component: 150  -  total flux cleaned = 0.000570944 Jy
! Component: 200  -  total flux cleaned = 0.00070866 Jy
! Total flux subtracted in 200 components = 0.00070866 Jy
! Clean residual min=-0.002084 max=0.002727 Jy/beam
! Clean residual mean=-0.000005 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.191837 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 128 components and 0.191837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051469Jy  sigma=0.443015
! Fit after  self-cal, rms=0.051463Jy  sigma=0.442961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (94.5, -29.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169503 Jy
! Component: 100  -  total flux cleaned = 0.00179137 Jy
! Component: 150  -  total flux cleaned = 0.00179644 Jy
! Component: 200  -  total flux cleaned = 0.00183172 Jy
! Total flux subtracted in 200 components = 0.00183172 Jy
! Clean residual min=-0.001903 max=0.002178 Jy/beam
! Clean residual mean=-0.000006 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.193669 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 151 components and 0.193669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051352Jy  sigma=0.441858
! Fit after  self-cal, rms=0.051343Jy  sigma=0.441784
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051343Jy  sigma=0.441784
! Fit after  self-cal, rms=0.051385Jy  sigma=0.441736
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.357 mas, bmaj=6.144 mas, bpa=7.012 degrees
! Estimated noise=1.11101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547887 Jy
! Component: 100  -  total flux cleaned = 0.000580982 Jy
! Component: 150  -  total flux cleaned = 0.00066843 Jy
! Component: 200  -  total flux cleaned = 0.000695628 Jy
! Total flux subtracted in 200 components = 0.000695628 Jy
! Clean residual min=-0.001984 max=0.002010 Jy/beam
! Clean residual mean=-0.000006 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.194365 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 156 components and 0.194365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051349Jy  sigma=0.441423
! Fit after  self-cal, rms=0.051349Jy  sigma=0.441411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00022774 Jy
! Component: 100  -  total flux cleaned = 0.00027695 Jy
! Component: 150  -  total flux cleaned = 0.000299607 Jy
! Component: 200  -  total flux cleaned = 0.000342682 Jy
! Total flux subtracted in 200 components = 0.000342682 Jy
! Clean residual min=-0.002011 max=0.001945 Jy/beam
! Clean residual mean=-0.000006 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.194707 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 166 components and 0.194707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051329Jy  sigma=0.441239
! Fit after  self-cal, rms=0.051329Jy  sigma=0.441235
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051329Jy  sigma=0.441235
! Fit after  self-cal, rms=0.051365Jy  sigma=0.441216
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.162 mas, bmaj=9.792 mas, bpa=8.752 degrees
! Estimated noise=1.38154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000646268 Jy
! Component: 100  -  total flux cleaned = 0.00100849 Jy
! Component: 150  -  total flux cleaned = 0.00133035 Jy
! Component: 200  -  total flux cleaned = 0.00148452 Jy
! Total flux subtracted in 200 components = 0.00148452 Jy
! Clean residual min=-0.001935 max=0.001895 Jy/beam
! Clean residual mean=-0.000012 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.196192 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 179 components and 0.196192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051363Jy  sigma=0.441210
! Fit after  self-cal, rms=0.051361Jy  sigma=0.441192
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175988 Jy
! Component: 100  -  total flux cleaned = 0.00023031 Jy
! Component: 150  -  total flux cleaned = 0.000253627 Jy
! Component: 200  -  total flux cleaned = 0.000275448 Jy
! Total flux subtracted in 200 components = 0.000275448 Jy
! Clean residual min=-0.001946 max=0.001830 Jy/beam
! Clean residual mean=-0.000012 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.196467 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 195 components and 0.196467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051365Jy  sigma=0.441228
! Fit after  self-cal, rms=0.051365Jy  sigma=0.441225
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=6.142 mas, bpa=6.987 degrees
! Estimated noise=1.11163 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.359 x 6.142 at 6.987 degrees (North through East)
! Clean map  min=-0.0019741  max=0.13069 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.794 mas, bmaj=5.256 mas, bpa=5.431 degrees
! Estimated noise=1.62281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100397 Jy
! Component: 100  -  total flux cleaned = 0.135218 Jy
! Component: 150  -  total flux cleaned = 0.151928 Jy
! Component: 200  -  total flux cleaned = 0.162571 Jy
! Total flux subtracted in 200 components = 0.162571 Jy
! Clean residual min=-0.004337 max=0.005784 Jy/beam
! Clean residual mean=-0.000016 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.162571 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.162571 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=6.142 mas, bpa=6.987 degrees
! Estimated noise=1.11163 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00948474 Jy
! Component: 100  -  total flux cleaned = 0.0154395 Jy
! Component: 150  -  total flux cleaned = 0.0195956 Jy
! Component: 200  -  total flux cleaned = 0.0228086 Jy
! Total flux subtracted in 200 components = 0.0228086 Jy
! Clean residual min=-0.002412 max=0.002614 Jy/beam
! Clean residual mean=-0.000010 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.185379 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 72 components and 0.185379 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.162 mas, bmaj=9.792 mas, bpa=8.752 degrees
! Estimated noise=1.38154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0040615 Jy
! Component: 100  -  total flux cleaned = 0.00665879 Jy
! Component: 150  -  total flux cleaned = 0.00829055 Jy
! Component: 200  -  total flux cleaned = 0.00896733 Jy
! Total flux subtracted in 200 components = 0.00896733 Jy
! Clean residual min=-0.002180 max=0.002167 Jy/beam
! Clean residual mean=-0.000015 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.194347 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507863 Jy
! Component: 100  -  total flux cleaned = 0.000852302 Jy
! Component: 150  -  total flux cleaned = 0.00114413 Jy
! Component: 200  -  total flux cleaned = 0.00133282 Jy
! Total flux subtracted in 200 components = 0.00133282 Jy
! Clean residual min=-0.001907 max=0.001913 Jy/beam
! Clean residual mean=-0.000013 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.195679 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 137 components and 0.19568 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=6.142 mas, bpa=6.987 degrees
! Estimated noise=1.11163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196621 Jy
! Component: 100  -  total flux cleaned = 0.000280987 Jy
! Component: 150  -  total flux cleaned = 0.000281111 Jy
! Component: 200  -  total flux cleaned = 0.000247835 Jy
! Total flux subtracted in 200 components = 0.000247835 Jy
! Clean residual min=-0.002037 max=0.002001 Jy/beam
! Clean residual mean=-0.000006 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.195927 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 159 components and 0.195927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051453Jy  sigma=0.441933
! Fit after  self-cal, rms=0.051444Jy  sigma=0.441869
wmodel J0330+4656_S_map.mod
! Writing 159 model components to file: J0330+4656_S_map.mod
wobs   J0330+4656_S_uvs.fits
! Writing UV FITS file: J0330+4656_S_uvs.fits
wwins  J0330+4656_S_map.win
! wwins: Wrote 4 windows to J0330+4656_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000221644 Jy
! Component: 100  -  total flux cleaned = 0.000533969 Jy
! Component: 150  -  total flux cleaned = 0.00083243 Jy
! Component: 200  -  total flux cleaned = 0.00115239 Jy
! Component: 250  -  total flux cleaned = 0.00133854 Jy
! Component: 300  -  total flux cleaned = 0.00154934 Jy
! Component: 350  -  total flux cleaned = 0.00181263 Jy
! Component: 400  -  total flux cleaned = 0.00192595 Jy
! Component: 450  -  total flux cleaned = 0.00209282 Jy
! Component: 500  -  total flux cleaned = 0.00220151 Jy
! Component: 550  -  total flux cleaned = 0.0023882 Jy
! Component: 600  -  total flux cleaned = 0.00244055 Jy
! Component: 650  -  total flux cleaned = 0.002518 Jy
! Component: 700  -  total flux cleaned = 0.00256872 Jy
! Component: 750  -  total flux cleaned = 0.00266813 Jy
! Component: 800  -  total flux cleaned = 0.00274124 Jy
! Component: 850  -  total flux cleaned = 0.00274124 Jy
! Component: 900  -  total flux cleaned = 0.00278822 Jy
! Component: 950  -  total flux cleaned = 0.00276493 Jy
! Component: 1000  -  total flux cleaned = 0.00278738 Jy
! Component: 1050  -  total flux cleaned = 0.00276487 Jy
! Component: 1100  -  total flux cleaned = 0.0027427 Jy
! Component: 1150  -  total flux cleaned = 0.00274277 Jy
! Component: 1200  -  total flux cleaned = 0.00274248 Jy
! Component: 1250  -  total flux cleaned = 0.00267885 Jy
! Component: 1300  -  total flux cleaned = 0.00272063 Jy
! Component: 1350  -  total flux cleaned = 0.00267944 Jy
! Component: 1400  -  total flux cleaned = 0.00259851 Jy
! Component: 1450  -  total flux cleaned = 0.00267915 Jy
! Component: 1500  -  total flux cleaned = 0.0026395 Jy
! Component: 1550  -  total flux cleaned = 0.00262012 Jy
! Component: 1600  -  total flux cleaned = 0.0026006 Jy
! Component: 1650  -  total flux cleaned = 0.0026389 Jy
! Component: 1700  -  total flux cleaned = 0.00263884 Jy
! Component: 1750  -  total flux cleaned = 0.00258296 Jy
! Component: 1800  -  total flux cleaned = 0.00258325 Jy
! Component: 1850  -  total flux cleaned = 0.00261992 Jy
! Component: 1900  -  total flux cleaned = 0.00258387 Jy
! Component: 1950  -  total flux cleaned = 0.00256606 Jy
! Component: 2000  -  total flux cleaned = 0.00258358 Jy
! Component: 2050  -  total flux cleaned = 0.00254841 Jy
! Component: 2100  -  total flux cleaned = 0.00247952 Jy
! Component: 2150  -  total flux cleaned = 0.00244547 Jy
! Component: 2200  -  total flux cleaned = 0.00247929 Jy
! Component: 2250  -  total flux cleaned = 0.00251253 Jy
! Component: 2300  -  total flux cleaned = 0.00244598 Jy
! Component: 2350  -  total flux cleaned = 0.00241323 Jy
! Component: 2400  -  total flux cleaned = 0.00242955 Jy
! Component: 2450  -  total flux cleaned = 0.00236548 Jy
! Component: 2500  -  total flux cleaned = 0.00242911 Jy
! Component: 2550  -  total flux cleaned = 0.00241331 Jy
! Component: 2600  -  total flux cleaned = 0.0024444 Jy
! Component: 2650  -  total flux cleaned = 0.00249072 Jy
! Component: 2700  -  total flux cleaned = 0.0024142 Jy
! Component: 2750  -  total flux cleaned = 0.00242927 Jy
! Component: 2800  -  total flux cleaned = 0.00244435 Jy
! Component: 2850  -  total flux cleaned = 0.00245914 Jy
! Component: 2900  -  total flux cleaned = 0.00238521 Jy
! Component: 2950  -  total flux cleaned = 0.00245856 Jy
! Component: 3000  -  total flux cleaned = 0.00240038 Jy
! Component: 3050  -  total flux cleaned = 0.00245807 Jy
! Component: 3100  -  total flux cleaned = 0.00248674 Jy
! Component: 3150  -  total flux cleaned = 0.00243026 Jy
! Component: 3200  -  total flux cleaned = 0.00245849 Jy
! Component: 3250  -  total flux cleaned = 0.00241681 Jy
! Component: 3300  -  total flux cleaned = 0.00245831 Jy
! Component: 3350  -  total flux cleaned = 0.00240353 Jy
! Component: 3400  -  total flux cleaned = 0.00245805 Jy
! Component: 3450  -  total flux cleaned = 0.00241763 Jy
! Component: 3500  -  total flux cleaned = 0.0024177 Jy
! Component: 3550  -  total flux cleaned = 0.0024178 Jy
! Component: 3600  -  total flux cleaned = 0.0023651 Jy
! Component: 3650  -  total flux cleaned = 0.00241748 Jy
! Component: 3700  -  total flux cleaned = 0.00241739 Jy
! Component: 3750  -  total flux cleaned = 0.00239156 Jy
! Component: 3800  -  total flux cleaned = 0.00236595 Jy
! Component: 3850  -  total flux cleaned = 0.00239145 Jy
! Component: 3900  -  total flux cleaned = 0.002366 Jy
! Component: 3950  -  total flux cleaned = 0.00235347 Jy
! Component: 4000  -  total flux cleaned = 0.00232846 Jy
! Component: 4050  -  total flux cleaned = 0.00231585 Jy
! Total flux subtracted in 4096 components = 0.00227872 Jy
! Clean residual min=-0.000847 max=0.000789 Jy/beam
! Clean residual mean=-0.000002 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.198206 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 438 components and 0.198206 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0330+4656_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.359 x 6.142 at 6.987 degrees (North through East)
! Clean map  min=-0.0014156  max=0.13121 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0330+4656_S_map.fits
wmodel /image_prod/ug002_uva//J0330+4656_S_map.mod
! Writing 438 model components to file: /image_prod/ug002_uva//J0330+4656_S_map.mod
wobs   /image_prod/ug002_uva//J0330+4656_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0330+4656_S_uvs.fits
wwins  /image_prod/ug002_uva//J0330+4656_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0330+4656_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.131206 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00021515 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.491936 0.491936 0.983873 1.96775 3.93549 7.87098 15.742 31.4839 62.9679
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.131 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  609.834 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0330+4656_S_dfm.log closed on Wed Mar  4 19:56:52 2020