! Started logfile: /image_prod/ug002_uva//J0329+3510_X_dfm.log on Wed Mar  4 19:56:17 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0329+3510_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0329+3510_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.781111 visibilities/baseline/integration-bin.
! Found source: J0329+3510
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25308 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0329+3510_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.062423Jy  sigma=8.241745
! Fit after  self-cal, rms=0.670563Jy  sigma=5.133808
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7256 mas, bmaj=1.266 mas, bpa=-2.867 degrees
! Estimated noise=1.19181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.240643 Jy
! Component: 100  -  total flux cleaned = 0.324505 Jy
! Total flux subtracted in 100 components = 0.324505 Jy
! Clean residual min=-0.015234 max=0.038530 Jy/beam
! Clean residual mean=-0.000025 rms=0.003907 Jy/beam
! Combined flux in latest and established models = 0.324505 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.324505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.120942Jy  sigma=0.905440
! Fit after  self-cal, rms=0.120418Jy  sigma=0.901067
! Inverting map 
! Added new window around map position (-0.2, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0457143 Jy
! Component: 100  -  total flux cleaned = 0.0722592 Jy
! Total flux subtracted in 100 components = 0.0722592 Jy
! Clean residual min=-0.012280 max=0.019576 Jy/beam
! Clean residual mean=-0.000020 rms=0.002683 Jy/beam
! Combined flux in latest and established models = 0.396764 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.396764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092303Jy  sigma=0.676798
! Fit after  self-cal, rms=0.091812Jy  sigma=0.672523
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020431 Jy
! Component: 100  -  total flux cleaned = 0.0342869 Jy
! Total flux subtracted in 100 components = 0.0342869 Jy
! Clean residual min=-0.011902 max=0.013937 Jy/beam
! Clean residual mean=-0.000018 rms=0.002283 Jy/beam
! Combined flux in latest and established models = 0.431051 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.431051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083775Jy  sigma=0.607386
! Fit after  self-cal, rms=0.083496Jy  sigma=0.605088
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9518 mas, bmaj=1.563 mas, bpa=-1.239 degrees
! Estimated noise=0.583225 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220109 Jy
! Component: 100  -  total flux cleaned = 0.0374459 Jy
! Component: 150  -  total flux cleaned = 0.0491128 Jy
! Component: 200  -  total flux cleaned = 0.0582029 Jy
! Total flux subtracted in 200 components = 0.0582029 Jy
! Clean residual min=-0.011598 max=0.013135 Jy/beam
! Clean residual mean=-0.000031 rms=0.002377 Jy/beam
! Combined flux in latest and established models = 0.489254 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 50 components and 0.489254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075281Jy  sigma=0.542262
! Fit after  self-cal, rms=0.074578Jy  sigma=0.535993
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9518 x 1.563 at -1.239 degrees (North through East)
! Clean map  min=-0.011151  max=0.32969 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.04     
!   LA        1.00     MK        1.05     NL        1.09     OV        1.01     
!   PT        0.86     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.98     KP        1.04     
!   LA        0.99     MK        1.05     NL        1.10     OV        1.02     
!   PT        0.84     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.97     KP        1.04     
!   LA        0.98     MK        1.03     NL        1.10     OV        1.02     
!   PT        0.84     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.97     KP        1.05     
!   LA        0.99     MK        1.03     NL        1.08     OV        1.01     
!   PT        0.86     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.95     KP        1.05     
!   LA        0.99     MK        1.02     NL        1.09     OV        1.01     
!   PT        0.84     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.98     KP        1.05     
!   LA        0.97     MK        1.01     NL        1.10     OV        1.02     
!   PT        0.85     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.98     KP        1.03     
!   LA        0.98     MK        1.00     NL        1.09     OV        1.02     
!   PT        0.85     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.97     KP        1.06     
!   LA        0.97     MK        1.01     NL        1.09     OV        1.02     
!   PT        0.83     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.96     KP        1.04     
!   LA        0.99     MK        1.03     NL        1.10     OV        1.02     
!   PT        0.84     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.97     KP        1.04     
!   LA        0.98     MK        1.04     NL        1.09     OV        1.02     
!   PT        0.85     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.96     KP        1.04     
!   LA        0.98     MK        1.01     NL        1.09     OV        1.02     
!   PT        0.85     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.09     OV        1.02     
!   PT        0.84     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.074578Jy  sigma=0.535993
! Fit after  self-cal, rms=0.064322Jy  sigma=0.460540
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.965 mas, bmaj=1.578 mas, bpa=-1.573 degrees
! Estimated noise=0.576859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123557 Jy
! Component: 100  -  total flux cleaned = 0.00161455 Jy
! Component: 150  -  total flux cleaned = 0.00192787 Jy
! Component: 200  -  total flux cleaned = 0.00206466 Jy
! Total flux subtracted in 200 components = 0.00206466 Jy
! Clean residual min=-0.004952 max=0.004849 Jy/beam
! Clean residual mean=-0.000002 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.491319 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 64 components and 0.491319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063237Jy  sigma=0.453144
! Fit after  self-cal, rms=0.063173Jy  sigma=0.452383
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063173Jy  sigma=0.452383
! Fit after  self-cal, rms=0.064479Jy  sigma=0.432059
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9681 mas, bmaj=1.593 mas, bpa=0.9052 degrees
! Estimated noise=0.580297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113024 Jy
! Component: 100  -  total flux cleaned = 0.000464406 Jy
! Component: 150  -  total flux cleaned = 9.85815e-05 Jy
! Component: 200  -  total flux cleaned = 2.16679e-05 Jy
! Total flux subtracted in 200 components = 2.16679e-05 Jy
! Clean residual min=-0.002662 max=0.003065 Jy/beam
! Clean residual mean=0.000000 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.49134 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.49134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064138Jy  sigma=0.428951
! Fit after  self-cal, rms=0.064126Jy  sigma=0.428601
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158641 Jy
! Component: 100  -  total flux cleaned = 0.00109998 Jy
! Component: 150  -  total flux cleaned = 0.000813599 Jy
! Component: 200  -  total flux cleaned = 0.00049662 Jy
! Total flux subtracted in 200 components = 0.00049662 Jy
! Clean residual min=-0.002402 max=0.002757 Jy/beam
! Clean residual mean=0.000001 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.491837 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 87 components and 0.491837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063917Jy  sigma=0.426901
! Fit after  self-cal, rms=0.063899Jy  sigma=0.426789
! Inverting map 
! Added new window around map position (-6.8, -16.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163633 Jy
! Component: 100  -  total flux cleaned = 0.00185239 Jy
! Component: 150  -  total flux cleaned = 0.00197847 Jy
! Component: 200  -  total flux cleaned = 0.00186781 Jy
! Total flux subtracted in 200 components = 0.00186781 Jy
! Clean residual min=-0.002087 max=0.002133 Jy/beam
! Clean residual mean=0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.493705 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.493705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063738Jy  sigma=0.425573
! Fit after  self-cal, rms=0.063731Jy  sigma=0.425532
! Inverting map 
! Added new window around map position (9.8, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565119 Jy
! Component: 100  -  total flux cleaned = 0.000449346 Jy
! Component: 150  -  total flux cleaned = 0.000397441 Jy
! Component: 200  -  total flux cleaned = 0.000251925 Jy
! Total flux subtracted in 200 components = 0.000251925 Jy
! Clean residual min=-0.001964 max=0.002024 Jy/beam
! Clean residual mean=0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.493957 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.493957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063608Jy  sigma=0.424707
! Fit after  self-cal, rms=0.063604Jy  sigma=0.424671
! Inverting map 
! Added new window around map position (-14.6, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357192 Jy
! Component: 100  -  total flux cleaned = 0.000203533 Jy
! Component: 150  -  total flux cleaned = 0.000204762 Jy
! Component: 200  -  total flux cleaned = 0.000249637 Jy
! Total flux subtracted in 200 components = 0.000249637 Jy
! Clean residual min=-0.001913 max=0.001799 Jy/beam
! Clean residual mean=0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.494206 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 129 components and 0.494206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063500Jy  sigma=0.423895
! Fit after  self-cal, rms=0.063496Jy  sigma=0.423878
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063496Jy  sigma=0.423878
! Fit after  self-cal, rms=0.063846Jy  sigma=0.423406
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9676 mas, bmaj=1.596 mas, bpa=1.238 degrees
! Estimated noise=0.580059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.96376e-05 Jy
! Component: 100  -  total flux cleaned = -0.000173728 Jy
! Component: 150  -  total flux cleaned = -0.000387539 Jy
! Component: 200  -  total flux cleaned = -0.000549369 Jy
! Total flux subtracted in 200 components = -0.000549369 Jy
! Clean residual min=-0.001663 max=0.001709 Jy/beam
! Clean residual mean=0.000000 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.493657 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 137 components and 0.493657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063776Jy  sigma=0.422864
! Fit after  self-cal, rms=0.063772Jy  sigma=0.422829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135108 Jy
! Component: 100  -  total flux cleaned = 6.0128e-05 Jy
! Component: 150  -  total flux cleaned = -4.6128e-05 Jy
! Component: 200  -  total flux cleaned = -0.000113387 Jy
! Total flux subtracted in 200 components = -0.000113387 Jy
! Clean residual min=-0.001591 max=0.001633 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.493544 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 142 components and 0.493544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063728Jy  sigma=0.422507
! Fit after  self-cal, rms=0.063725Jy  sigma=0.422492
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063725Jy  sigma=0.422492
! Fit after  self-cal, rms=0.063892Jy  sigma=0.422426
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.171 mas, bmaj=2.466 mas, bpa=-4.433 degrees
! Estimated noise=0.727773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000378006 Jy
! Component: 100  -  total flux cleaned = -0.00043767 Jy
! Component: 150  -  total flux cleaned = -0.000463735 Jy
! Component: 200  -  total flux cleaned = -0.000465207 Jy
! Total flux subtracted in 200 components = -0.000465207 Jy
! Clean residual min=-0.001413 max=0.001501 Jy/beam
! Clean residual mean=0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.493078 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 154 components and 0.493078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063879Jy  sigma=0.422244
! Fit after  self-cal, rms=0.063878Jy  sigma=0.422235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.50378e-07 Jy
! Component: 100  -  total flux cleaned = -1.23533e-06 Jy
! Component: 150  -  total flux cleaned = -3.97417e-05 Jy
! Component: 200  -  total flux cleaned = -5.68567e-05 Jy
! Total flux subtracted in 200 components = -5.68567e-05 Jy
! Clean residual min=-0.001377 max=0.001475 Jy/beam
! Clean residual mean=0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.493021 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 166 components and 0.493021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063872Jy  sigma=0.422145
! Fit after  self-cal, rms=0.063870Jy  sigma=0.422136
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9676 mas, bmaj=1.597 mas, bpa=1.393 degrees
! Estimated noise=0.579848 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9676 x 1.597 at 1.393 degrees (North through East)
! Clean map  min=-0.0024742  max=0.32632 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7353 mas, bmaj=1.294 mas, bpa=0.2274 degrees
! Estimated noise=1.21302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.243707 Jy
! Component: 100  -  total flux cleaned = 0.33001 Jy
! Component: 150  -  total flux cleaned = 0.374022 Jy
! Component: 200  -  total flux cleaned = 0.401428 Jy
! Total flux subtracted in 200 components = 0.401428 Jy
! Clean residual min=-0.007555 max=0.015065 Jy/beam
! Clean residual mean=-0.000010 rms=0.001834 Jy/beam
! Combined flux in latest and established models = 0.401428 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.401428 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9676 mas, bmaj=1.597 mas, bpa=1.393 degrees
! Estimated noise=0.579848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266505 Jy
! Component: 100  -  total flux cleaned = 0.0442761 Jy
! Component: 150  -  total flux cleaned = 0.0567732 Jy
! Component: 200  -  total flux cleaned = 0.0657875 Jy
! Total flux subtracted in 200 components = 0.0657875 Jy
! Clean residual min=-0.002961 max=0.005088 Jy/beam
! Clean residual mean=-0.000007 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.467216 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 47 components and 0.467216 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655085 Jy
! Component: 100  -  total flux cleaned = 0.0114403 Jy
! Component: 150  -  total flux cleaned = 0.0152599 Jy
! Component: 200  -  total flux cleaned = 0.0178055 Jy
! Total flux subtracted in 200 components = 0.0178055 Jy
! Clean residual min=-0.002050 max=0.003366 Jy/beam
! Clean residual mean=-0.000002 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.485021 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 65 components and 0.485021 Jy
! Inverting map 
! Added new window around map position (0.6, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233433 Jy
! Component: 100  -  total flux cleaned = 0.0034557 Jy
! Component: 150  -  total flux cleaned = 0.00400806 Jy
! Component: 200  -  total flux cleaned = 0.00443831 Jy
! Total flux subtracted in 200 components = 0.00443831 Jy
! Clean residual min=-0.001812 max=0.002222 Jy/beam
! Clean residual mean=-0.000001 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.48946 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 87 components and 0.48946 Jy
! Inverting map 
! Added new window around map position (10.6, -38.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000697187 Jy
! Component: 100  -  total flux cleaned = 0.000839927 Jy
! Component: 150  -  total flux cleaned = 0.000905215 Jy
! Component: 200  -  total flux cleaned = 0.00096929 Jy
! Total flux subtracted in 200 components = 0.00096929 Jy
! Clean residual min=-0.001666 max=0.001889 Jy/beam
! Clean residual mean=-0.000000 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.490429 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 105 components and 0.490429 Jy
! Inverting map 
! Added new window around map position (15.4, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105438 Jy
! Component: 100  -  total flux cleaned = 0.00117067 Jy
! Component: 150  -  total flux cleaned = 0.00111291 Jy
! Component: 200  -  total flux cleaned = 0.00116572 Jy
! Total flux subtracted in 200 components = 0.00116572 Jy
! Clean residual min=-0.001524 max=0.001565 Jy/beam
! Clean residual mean=-0.000000 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.491595 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 118 components and 0.491595 Jy
! Inverting map 
! Added new window around map position (-2.6, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974837 Jy
! Component: 100  -  total flux cleaned = 0.00112429 Jy
! Component: 150  -  total flux cleaned = 0.00103023 Jy
! Component: 200  -  total flux cleaned = 0.00103212 Jy
! Total flux subtracted in 200 components = 0.00103212 Jy
! Clean residual min=-0.001506 max=0.001411 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.492627 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 141 components and 0.492627 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.171 mas, bmaj=2.466 mas, bpa=-4.433 degrees
! Estimated noise=0.727773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704843 Jy
! Component: 100  -  total flux cleaned = 0.000777483 Jy
! Component: 150  -  total flux cleaned = 0.00080659 Jy
! Component: 200  -  total flux cleaned = 0.000707095 Jy
! Total flux subtracted in 200 components = 0.000707095 Jy
! Clean residual min=-0.001422 max=0.001279 Jy/beam
! Clean residual mean=0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.493334 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.50414e-05 Jy
! Component: 100  -  total flux cleaned = -4.60494e-05 Jy
! Component: 150  -  total flux cleaned = -4.62113e-05 Jy
! Component: 200  -  total flux cleaned = -6.41886e-05 Jy
! Total flux subtracted in 200 components = -6.41886e-05 Jy
! Clean residual min=-0.001387 max=0.001265 Jy/beam
! Clean residual mean=0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.49327 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 177 components and 0.49327 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9676 mas, bmaj=1.597 mas, bpa=1.393 degrees
! Estimated noise=0.579848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000299947 Jy
! Component: 100  -  total flux cleaned = -0.00030017 Jy
! Component: 150  -  total flux cleaned = -0.000259974 Jy
! Component: 200  -  total flux cleaned = -0.00026007 Jy
! Total flux subtracted in 200 components = -0.00026007 Jy
! Clean residual min=-0.001414 max=0.001344 Jy/beam
! Clean residual mean=0.000000 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.49301 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 184 components and 0.49301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063839Jy  sigma=0.421591
! Fit after  self-cal, rms=0.063803Jy  sigma=0.421458
wmodel J0329+3510_X_map.mod
! Writing 184 model components to file: J0329+3510_X_map.mod
wobs   J0329+3510_X_uvs.fits
! Writing UV FITS file: J0329+3510_X_uvs.fits
wwins  J0329+3510_X_map.win
! wwins: Wrote 11 windows to J0329+3510_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000649757 Jy
! Component: 100  -  total flux cleaned = -0.00119052 Jy
! Component: 150  -  total flux cleaned = -0.00141272 Jy
! Component: 200  -  total flux cleaned = -0.00154098 Jy
! Component: 250  -  total flux cleaned = -0.00164517 Jy
! Component: 300  -  total flux cleaned = -0.00172606 Jy
! Component: 350  -  total flux cleaned = -0.00178533 Jy
! Component: 400  -  total flux cleaned = -0.00186232 Jy
! Component: 450  -  total flux cleaned = -0.00189989 Jy
! Component: 500  -  total flux cleaned = -0.00201136 Jy
! Component: 550  -  total flux cleaned = -0.0020657 Jy
! Component: 600  -  total flux cleaned = -0.00211932 Jy
! Component: 650  -  total flux cleaned = -0.00213658 Jy
! Component: 700  -  total flux cleaned = -0.00211933 Jy
! Component: 750  -  total flux cleaned = -0.00217111 Jy
! Component: 800  -  total flux cleaned = -0.00218818 Jy
! Component: 850  -  total flux cleaned = -0.00220514 Jy
! Component: 900  -  total flux cleaned = -0.00223843 Jy
! Component: 950  -  total flux cleaned = -0.00232033 Jy
! Component: 1000  -  total flux cleaned = -0.0022877 Jy
! Component: 1050  -  total flux cleaned = -0.00236737 Jy
! Component: 1100  -  total flux cleaned = -0.00236747 Jy
! Component: 1150  -  total flux cleaned = -0.00239856 Jy
! Component: 1200  -  total flux cleaned = -0.00241414 Jy
! Component: 1250  -  total flux cleaned = -0.00249031 Jy
! Component: 1300  -  total flux cleaned = -0.00249009 Jy
! Component: 1350  -  total flux cleaned = -0.00250518 Jy
! Component: 1400  -  total flux cleaned = -0.00254953 Jy
! Component: 1450  -  total flux cleaned = -0.00260827 Jy
! Component: 1500  -  total flux cleaned = -0.00265165 Jy
! Component: 1550  -  total flux cleaned = -0.00268039 Jy
! Component: 1600  -  total flux cleaned = -0.00266621 Jy
! Component: 1650  -  total flux cleaned = -0.00268034 Jy
! Component: 1700  -  total flux cleaned = -0.00273616 Jy
! Component: 1750  -  total flux cleaned = -0.0027223 Jy
! Component: 1800  -  total flux cleaned = -0.00276345 Jy
! Component: 1850  -  total flux cleaned = -0.00283139 Jy
! Component: 1900  -  total flux cleaned = -0.0028447 Jy
! Component: 1950  -  total flux cleaned = -0.00285795 Jy
! Component: 2000  -  total flux cleaned = -0.00288444 Jy
! Component: 2050  -  total flux cleaned = -0.00297656 Jy
! Component: 2100  -  total flux cleaned = -0.00297652 Jy
! Component: 2150  -  total flux cleaned = -0.00305401 Jy
! Component: 2200  -  total flux cleaned = -0.00306665 Jy
! Component: 2250  -  total flux cleaned = -0.00313015 Jy
! Component: 2300  -  total flux cleaned = -0.00311756 Jy
! Component: 2350  -  total flux cleaned = -0.00310503 Jy
! Component: 2400  -  total flux cleaned = -0.00313001 Jy
! Component: 2450  -  total flux cleaned = -0.00320423 Jy
! Component: 2500  -  total flux cleaned = -0.00320413 Jy
! Component: 2550  -  total flux cleaned = -0.00324061 Jy
! Component: 2600  -  total flux cleaned = -0.00326475 Jy
! Component: 2650  -  total flux cleaned = -0.0032046 Jy
! Component: 2700  -  total flux cleaned = -0.00325239 Jy
! Component: 2750  -  total flux cleaned = -0.003288 Jy
! Component: 2800  -  total flux cleaned = -0.00328786 Jy
! Component: 2850  -  total flux cleaned = -0.00334626 Jy
! Component: 2900  -  total flux cleaned = -0.00331139 Jy
! Component: 2950  -  total flux cleaned = -0.00329985 Jy
! Component: 3000  -  total flux cleaned = -0.00331131 Jy
! Component: 3050  -  total flux cleaned = -0.00339107 Jy
! Component: 3100  -  total flux cleaned = -0.0034023 Jy
! Component: 3150  -  total flux cleaned = -0.00337982 Jy
! Component: 3200  -  total flux cleaned = -0.00340212 Jy
! Component: 3250  -  total flux cleaned = -0.00335769 Jy
! Component: 3300  -  total flux cleaned = -0.00342385 Jy
! Component: 3350  -  total flux cleaned = -0.00341285 Jy
! Component: 3400  -  total flux cleaned = -0.00342386 Jy
! Component: 3450  -  total flux cleaned = -0.00342385 Jy
! Component: 3500  -  total flux cleaned = -0.00344543 Jy
! Component: 3550  -  total flux cleaned = -0.00345604 Jy
! Component: 3600  -  total flux cleaned = -0.00345603 Jy
! Component: 3650  -  total flux cleaned = -0.00346663 Jy
! Component: 3700  -  total flux cleaned = -0.00347704 Jy
! Component: 3750  -  total flux cleaned = -0.00351864 Jy
! Component: 3800  -  total flux cleaned = -0.00351864 Jy
! Component: 3850  -  total flux cleaned = -0.0035599 Jy
! Component: 3900  -  total flux cleaned = -0.00358036 Jy
! Component: 3950  -  total flux cleaned = -0.00360079 Jy
! Component: 4000  -  total flux cleaned = -0.00358044 Jy
! Component: 4050  -  total flux cleaned = -0.00363071 Jy
! Total flux subtracted in 4096 components = -0.00359063 Jy
! Clean residual min=-0.000634 max=0.000616 Jy/beam
! Clean residual mean=0.000000 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.489419 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 463 components and 0.489419 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0329+3510_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9676 x 1.597 at 1.393 degrees (North through East)
! Clean map  min=-0.0013586  max=0.32718 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0329+3510_X_map.fits
wmodel /image_prod/ug002_uva//J0329+3510_X_map.mod
! Writing 463 model components to file: /image_prod/ug002_uva//J0329+3510_X_map.mod
wobs   /image_prod/ug002_uva//J0329+3510_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0329+3510_X_uvs.fits
wwins  /image_prod/ug002_uva//J0329+3510_X_map.win
! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0329+3510_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.32718 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000166441 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.152614 0.152614 0.305229 0.610457 1.22091 2.44183 4.88366 9.76731 19.5346 39.0693 78.1385
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.327 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1965.74 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0329+3510_X_dfm.log closed on Wed Mar  4 19:56:23 2020