! Started logfile: /image_prod/ug002_uva//J0310-0823_X_dfm.log on Wed Mar 4 19:50:24 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0310-0823_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0310-0823_X_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.928593 visibilities/baseline/integration-bin. ! Found source: J0310-0823 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 37608 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0310-0823_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003328Jy sigma=9.358730 ! Fit after self-cal, rms=0.957719Jy sigma=8.907286 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7193 mas, bmaj=1.907 mas, bpa=-4.501 degrees ! Estimated noise=0.76163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323054 Jy ! Component: 100 - total flux cleaned = 0.0432206 Jy ! Total flux subtracted in 100 components = 0.0432206 Jy ! Clean residual min=-0.003466 max=0.009705 Jy/beam ! Clean residual mean=0.000001 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0432205 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0432205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059911Jy sigma=0.512938 ! Fit after self-cal, rms=0.058541Jy sigma=0.499595 ! Inverting map ! Added new window around map position (2.6, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00996047 Jy ! Component: 100 - total flux cleaned = 0.0156806 Jy ! Total flux subtracted in 100 components = 0.0156806 Jy ! Clean residual min=-0.002614 max=0.005614 Jy/beam ! Clean residual mean=0.000001 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0589011 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.0589011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056541Jy sigma=0.477224 ! Fit after self-cal, rms=0.056173Jy sigma=0.473453 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596999 Jy ! Component: 100 - total flux cleaned = 0.00923984 Jy ! Total flux subtracted in 100 components = 0.00923984 Jy ! Clean residual min=-0.002189 max=0.003146 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0681409 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.0681409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055379Jy sigma=0.464628 ! Fit after self-cal, rms=0.055213Jy sigma=0.463077 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359863 Jy ! Component: 100 - total flux cleaned = 0.00565996 Jy ! Total flux subtracted in 100 components = 0.00565996 Jy ! Clean residual min=-0.001831 max=0.002584 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0738009 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0738009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054904Jy sigma=0.459773 ! Fit after self-cal, rms=0.054838Jy sigma=0.459178 ! Inverting map ! Added new window around map position (1.6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280626 Jy ! Component: 100 - total flux cleaned = 0.00425887 Jy ! Total flux subtracted in 100 components = 0.00425887 Jy ! Clean residual min=-0.001741 max=0.001779 Jy/beam ! Clean residual mean=0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0780598 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.0780598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054660Jy sigma=0.457209 ! Fit after self-cal, rms=0.054643Jy sigma=0.456967 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9254 mas, bmaj=2.303 mas, bpa=-3.395 degrees ! Estimated noise=0.400916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198338 Jy ! Component: 100 - total flux cleaned = 0.00244304 Jy ! Component: 150 - total flux cleaned = 0.00271278 Jy ! Component: 200 - total flux cleaned = 0.00286094 Jy ! Total flux subtracted in 200 components = 0.00286094 Jy ! Clean residual min=-0.001239 max=0.001227 Jy/beam ! Clean residual mean=0.000000 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0809207 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 64 components and 0.0809207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054552Jy sigma=0.455974 ! Fit after self-cal, rms=0.054535Jy sigma=0.455791 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9254 x 2.303 at -3.395 degrees (North through East) ! Clean map min=-0.0012223 max=0.038566 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.93 KP 1.02 ! LA 1.11 MK 0.96 NL 1.06 OV 0.94 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.97 KP 1.05 ! LA 1.08 MK 1.02 NL 1.06 OV 0.92 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.92 KP 1.05 ! LA 1.07 MK 1.01 NL 1.09 OV 0.95 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.98 KP 1.05 ! LA 1.10 MK 1.02 NL 1.14 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.92 KP 1.01 ! LA 1.05 MK 1.05 NL 1.06 OV 0.95 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.90 KP 1.06 ! LA 1.10 MK 0.99 NL 1.10 OV 0.96 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.91 KP 1.04 ! LA 1.09 MK 1.06 NL 1.00 OV 0.94 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.89 KP 1.06 ! LA 1.11 MK 0.94 NL 1.08 OV 0.95 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.94 KP 1.06 ! LA 1.08 MK 0.91 NL 1.08 OV 0.95 ! PT 0.87 SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.90 KP 1.06 ! LA 1.04 MK 0.92 NL 1.06 OV 0.94 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.90 KP 1.07 ! LA 1.07 MK 0.87 NL 1.01 OV 0.92 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.93 KP 1.09 ! LA 1.03 MK 0.80 NL 0.98 OV 0.92 ! PT 0.89 SC 0.93 ! ! ! Fit before self-cal, rms=0.054535Jy sigma=0.455791 ! Fit after self-cal, rms=0.052366Jy sigma=0.453967 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9127 mas, bmaj=2.292 mas, bpa=-3.806 degrees ! Estimated noise=0.398048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362877 Jy ! Component: 100 - total flux cleaned = 0.000462139 Jy ! Component: 150 - total flux cleaned = 0.000513699 Jy ! Component: 200 - total flux cleaned = 0.000556718 Jy ! Total flux subtracted in 200 components = 0.000556718 Jy ! Clean residual min=-0.000766 max=0.000883 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.0814774 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.0814774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052332Jy sigma=0.453650 ! Fit after self-cal, rms=0.052294Jy sigma=0.453437 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052294Jy sigma=0.453437 ! Fit after self-cal, rms=0.052000Jy sigma=0.452667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9104 mas, bmaj=2.294 mas, bpa=-3.79 degrees ! Estimated noise=0.394833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265157 Jy ! Component: 100 - total flux cleaned = 0.000385001 Jy ! Component: 150 - total flux cleaned = 0.000423724 Jy ! Component: 200 - total flux cleaned = 0.000438588 Jy ! Total flux subtracted in 200 components = 0.000438588 Jy ! Clean residual min=-0.000640 max=0.000805 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.081916 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.081916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051981Jy sigma=0.452477 ! Fit after self-cal, rms=0.051985Jy sigma=0.452387 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.4, -33.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610967 Jy ! Component: 100 - total flux cleaned = 0.000648892 Jy ! Component: 150 - total flux cleaned = 0.000666783 Jy ! Component: 200 - total flux cleaned = 0.000654494 Jy ! Total flux subtracted in 200 components = 0.000654494 Jy ! Clean residual min=-0.000657 max=0.000756 Jy/beam ! Clean residual mean=0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0825705 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.0825705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051968Jy sigma=0.452243 ! Fit after self-cal, rms=0.051962Jy sigma=0.452176 ! Inverting map ! Added new window around map position (-10.8, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627339 Jy ! Component: 100 - total flux cleaned = 0.000849456 Jy ! Component: 150 - total flux cleaned = 0.000983225 Jy ! Component: 200 - total flux cleaned = 0.00105723 Jy ! Total flux subtracted in 200 components = 0.00105723 Jy ! Clean residual min=-0.000651 max=0.000689 Jy/beam ! Clean residual mean=0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0836277 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 0.0836277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051948Jy sigma=0.452037 ! Fit after self-cal, rms=0.051946Jy sigma=0.452020 ! Inverting map ! Added new window around map position (-4.6, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476911 Jy ! Component: 100 - total flux cleaned = 0.000459041 Jy ! Component: 150 - total flux cleaned = 0.00045779 Jy ! Component: 200 - total flux cleaned = 0.000443453 Jy ! Total flux subtracted in 200 components = 0.000443453 Jy ! Clean residual min=-0.000654 max=0.000701 Jy/beam ! Clean residual mean=0.000000 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.0840712 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.0840712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051934Jy sigma=0.451912 ! Fit after self-cal, rms=0.051933Jy sigma=0.451895 ! Inverting map ! Added new window around map position (40.2, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672224 Jy ! Component: 100 - total flux cleaned = 0.00106824 Jy ! Component: 150 - total flux cleaned = 0.00120738 Jy ! Component: 200 - total flux cleaned = 0.0012502 Jy ! Total flux subtracted in 200 components = 0.0012502 Jy ! Clean residual min=-0.000628 max=0.000670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0853214 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 126 components and 0.0853214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051920Jy sigma=0.451784 ! Fit after self-cal, rms=0.051920Jy sigma=0.451771 ! Inverting map ! Added new window around map position (-6, -41.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638672 Jy ! Component: 100 - total flux cleaned = 0.0010661 Jy ! Component: 150 - total flux cleaned = 0.00136684 Jy ! Component: 200 - total flux cleaned = 0.0015746 Jy ! Total flux subtracted in 200 components = 0.0015746 Jy ! Clean residual min=-0.000627 max=0.000606 Jy/beam ! Clean residual mean=-0.000000 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.086896 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 136 components and 0.086896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051908Jy sigma=0.451668 ! Fit after self-cal, rms=0.051908Jy sigma=0.451657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051908Jy sigma=0.451657 ! Fit after self-cal, rms=0.051520Jy sigma=0.451575 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9084 mas, bmaj=2.296 mas, bpa=-3.897 degrees ! Estimated noise=0.391449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215606 Jy ! Component: 100 - total flux cleaned = 0.000434477 Jy ! Component: 150 - total flux cleaned = 0.000541546 Jy ! Component: 200 - total flux cleaned = 0.000592079 Jy ! Total flux subtracted in 200 components = 0.000592079 Jy ! Clean residual min=-0.000611 max=0.000583 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.0874881 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 154 components and 0.0874881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051513Jy sigma=0.451510 ! Fit after self-cal, rms=0.051516Jy sigma=0.451502 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149457 Jy ! Component: 100 - total flux cleaned = 0.000284978 Jy ! Component: 150 - total flux cleaned = 0.000331628 Jy ! Component: 200 - total flux cleaned = 0.000387906 Jy ! Total flux subtracted in 200 components = 0.000387906 Jy ! Clean residual min=-0.000608 max=0.000591 Jy/beam ! Clean residual mean=0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.087876 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 160 components and 0.087876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051511Jy sigma=0.451458 ! Fit after self-cal, rms=0.051511Jy sigma=0.451454 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051511Jy sigma=0.451454 ! Fit after self-cal, rms=0.051321Jy sigma=0.451446 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=3.923 mas, bpa=-0.3014 degrees ! Estimated noise=0.471039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116422 Jy ! Component: 100 - total flux cleaned = -8.65922e-05 Jy ! Component: 150 - total flux cleaned = -3.84039e-05 Jy ! Component: 200 - total flux cleaned = -3.80174e-05 Jy ! Total flux subtracted in 200 components = -3.80174e-05 Jy ! Clean residual min=-0.000498 max=0.000610 Jy/beam ! Clean residual mean=0.000000 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0878379 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 181 components and 0.087838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051319Jy sigma=0.451428 ! Fit after self-cal, rms=0.051319Jy sigma=0.451424 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479628 Jy ! Component: 100 - total flux cleaned = 0.000614884 Jy ! Component: 150 - total flux cleaned = 0.000669746 Jy ! Component: 200 - total flux cleaned = 0.000705679 Jy ! Total flux subtracted in 200 components = 0.000705679 Jy ! Clean residual min=-0.000484 max=0.000448 Jy/beam ! Clean residual mean=0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.0885436 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 202 components and 0.0885436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051315Jy sigma=0.451386 ! Fit after self-cal, rms=0.051314Jy sigma=0.451378 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.908 mas, bmaj=2.297 mas, bpa=-3.942 degrees ! Estimated noise=0.390115 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.908 x 2.297 at -3.942 degrees (North through East) ! Clean map min=-0.00055248 max=0.036771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7087 mas, bmaj=1.911 mas, bpa=-5.037 degrees ! Estimated noise=0.73081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334578 Jy ! Component: 100 - total flux cleaned = 0.0492449 Jy ! Component: 150 - total flux cleaned = 0.0586364 Jy ! Component: 200 - total flux cleaned = 0.0650598 Jy ! Total flux subtracted in 200 components = 0.0650598 Jy ! Clean residual min=-0.001850 max=0.003576 Jy/beam ! Clean residual mean=0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0650598 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0650598 Jy ! Inverting map and beam ! Estimated beam: bmin=0.908 mas, bmaj=2.297 mas, bpa=-3.942 degrees ! Estimated noise=0.390115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665489 Jy ! Component: 100 - total flux cleaned = 0.0106389 Jy ! Component: 150 - total flux cleaned = 0.0131536 Jy ! Component: 200 - total flux cleaned = 0.0148439 Jy ! Total flux subtracted in 200 components = 0.0148439 Jy ! Clean residual min=-0.000810 max=0.000999 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0799037 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 44 components and 0.0799037 Jy ! Inverting map ! Added new window around map position (0, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130116 Jy ! Component: 100 - total flux cleaned = 0.00238324 Jy ! Component: 150 - total flux cleaned = 0.00332239 Jy ! Component: 200 - total flux cleaned = 0.00415813 Jy ! Total flux subtracted in 200 components = 0.00415813 Jy ! Clean residual min=-0.000692 max=0.000761 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0840618 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 0.0840618 Jy ! Inverting map ! Added new window around map position (-40.2, -50.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756081 Jy ! Component: 100 - total flux cleaned = 0.00140724 Jy ! Component: 150 - total flux cleaned = 0.00188075 Jy ! Component: 200 - total flux cleaned = 0.00230073 Jy ! Total flux subtracted in 200 components = 0.00230073 Jy ! Clean residual min=-0.000656 max=0.000667 Jy/beam ! Clean residual mean=0.000000 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0863625 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 94 components and 0.0863625 Jy ! Inverting map ! Added new window around map position (46.6, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420571 Jy ! Component: 100 - total flux cleaned = 0.00070975 Jy ! Component: 150 - total flux cleaned = 0.000983951 Jy ! Component: 200 - total flux cleaned = 0.0012242 Jy ! Total flux subtracted in 200 components = 0.0012242 Jy ! Clean residual min=-0.000621 max=0.000602 Jy/beam ! Clean residual mean=0.000000 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.0875867 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 105 components and 0.0875867 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=3.923 mas, bpa=-0.3014 degrees ! Estimated noise=0.471039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000384891 Jy ! Component: 100 - total flux cleaned = 0.000718641 Jy ! Component: 150 - total flux cleaned = 0.00102669 Jy ! Component: 200 - total flux cleaned = 0.00127713 Jy ! Total flux subtracted in 200 components = 0.00127713 Jy ! Clean residual min=-0.000457 max=0.000555 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0888638 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-41, 39.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319171 Jy ! Component: 100 - total flux cleaned = 0.000391629 Jy ! Component: 150 - total flux cleaned = 0.000436971 Jy ! Component: 200 - total flux cleaned = 0.000491007 Jy ! Total flux subtracted in 200 components = 0.000491007 Jy ! Clean residual min=-0.000411 max=0.000405 Jy/beam ! Clean residual mean=-0.000000 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.0893549 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 171 components and 0.0893549 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.908 mas, bmaj=2.297 mas, bpa=-3.942 degrees ! Estimated noise=0.390115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.09184e-05 Jy ! Component: 100 - total flux cleaned = -3.11374e-05 Jy ! Component: 150 - total flux cleaned = -9.66829e-05 Jy ! Component: 200 - total flux cleaned = -8.01047e-05 Jy ! Total flux subtracted in 200 components = -8.01047e-05 Jy ! Clean residual min=-0.000538 max=0.000528 Jy/beam ! Clean residual mean=-0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0892747 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 209 components and 0.0892747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051313Jy sigma=0.451367 ! Fit after self-cal, rms=0.051307Jy sigma=0.451309 wmodel J0310-0823_X_map.mod ! Writing 209 model components to file: J0310-0823_X_map.mod wobs J0310-0823_X_uvs.fits ! Writing UV FITS file: J0310-0823_X_uvs.fits wwins J0310-0823_X_map.win ! wwins: Wrote 13 windows to J0310-0823_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.70325e-05 Jy ! Component: 100 - total flux cleaned = -0.000130614 Jy ! Component: 150 - total flux cleaned = -0.000210692 Jy ! Component: 200 - total flux cleaned = -0.00030623 Jy ! Component: 250 - total flux cleaned = -0.00040802 Jy ! Component: 300 - total flux cleaned = -0.000499542 Jy ! Component: 350 - total flux cleaned = -0.000589575 Jy ! Component: 400 - total flux cleaned = -0.000662003 Jy ! Component: 450 - total flux cleaned = -0.000741287 Jy ! Component: 500 - total flux cleaned = -0.000788228 Jy ! Component: 550 - total flux cleaned = -0.000842485 Jy ! Component: 600 - total flux cleaned = -0.000926567 Jy ! Component: 650 - total flux cleaned = -0.000964349 Jy ! Component: 700 - total flux cleaned = -0.00102422 Jy ! Component: 750 - total flux cleaned = -0.00108341 Jy ! Component: 800 - total flux cleaned = -0.00110546 Jy ! Component: 850 - total flux cleaned = -0.00113467 Jy ! Component: 900 - total flux cleaned = -0.00119947 Jy ! Component: 950 - total flux cleaned = -0.00122092 Jy ! Component: 1000 - total flux cleaned = -0.00127057 Jy ! Component: 1050 - total flux cleaned = -0.00128469 Jy ! Component: 1100 - total flux cleaned = -0.00129874 Jy ! Component: 1150 - total flux cleaned = -0.00136792 Jy ! Component: 1200 - total flux cleaned = -0.00138164 Jy ! Component: 1250 - total flux cleaned = -0.00143607 Jy ! Component: 1300 - total flux cleaned = -0.00143606 Jy ! Component: 1350 - total flux cleaned = -0.00149651 Jy ! Component: 1400 - total flux cleaned = -0.00152979 Jy ! Component: 1450 - total flux cleaned = -0.00154298 Jy ! Component: 1500 - total flux cleaned = -0.00156275 Jy ! Component: 1550 - total flux cleaned = -0.00160198 Jy ! Component: 1600 - total flux cleaned = -0.00163444 Jy ! Component: 1650 - total flux cleaned = -0.00164739 Jy ! Component: 1700 - total flux cleaned = -0.00166665 Jy ! Component: 1750 - total flux cleaned = -0.00169855 Jy ! Component: 1800 - total flux cleaned = -0.00170481 Jy ! Component: 1850 - total flux cleaned = -0.00173631 Jy ! Component: 1900 - total flux cleaned = -0.00177387 Jy ! Component: 1950 - total flux cleaned = -0.00179871 Jy ! Component: 2000 - total flux cleaned = -0.0018235 Jy ! Component: 2050 - total flux cleaned = -0.0018358 Jy ! Component: 2100 - total flux cleaned = -0.00187249 Jy ! Component: 2150 - total flux cleaned = -0.00190292 Jy ! Component: 2200 - total flux cleaned = -0.00188473 Jy ! Component: 2250 - total flux cleaned = -0.0019329 Jy ! Component: 2300 - total flux cleaned = -0.00193891 Jy ! Component: 2350 - total flux cleaned = -0.00196874 Jy ! Component: 2400 - total flux cleaned = -0.00197471 Jy ! Component: 2450 - total flux cleaned = -0.00199827 Jy ! Component: 2500 - total flux cleaned = -0.00202173 Jy ! Component: 2550 - total flux cleaned = -0.0020217 Jy ! Component: 2600 - total flux cleaned = -0.00203335 Jy ! Component: 2650 - total flux cleaned = -0.00204491 Jy ! Component: 2700 - total flux cleaned = -0.00207368 Jy ! Component: 2750 - total flux cleaned = -0.00206222 Jy ! Component: 2800 - total flux cleaned = -0.00207932 Jy ! Component: 2850 - total flux cleaned = -0.00211333 Jy ! Component: 2900 - total flux cleaned = -0.00209074 Jy ! Component: 2950 - total flux cleaned = -0.00212444 Jy ! Component: 3000 - total flux cleaned = -0.00213006 Jy ! Component: 3050 - total flux cleaned = -0.00214677 Jy ! Component: 3100 - total flux cleaned = -0.00214122 Jy ! Component: 3150 - total flux cleaned = -0.00216334 Jy ! Component: 3200 - total flux cleaned = -0.00217433 Jy ! Component: 3250 - total flux cleaned = -0.00214701 Jy ! Component: 3300 - total flux cleaned = -0.00216333 Jy ! Component: 3350 - total flux cleaned = -0.00214708 Jy ! Component: 3400 - total flux cleaned = -0.0021471 Jy ! Component: 3450 - total flux cleaned = -0.00215781 Jy ! Component: 3500 - total flux cleaned = -0.00215254 Jy ! Component: 3550 - total flux cleaned = -0.00217911 Jy ! Component: 3600 - total flux cleaned = -0.00217383 Jy ! Component: 3650 - total flux cleaned = -0.00218438 Jy ! Component: 3700 - total flux cleaned = -0.00220013 Jy ! Component: 3750 - total flux cleaned = -0.00220534 Jy ! Component: 3800 - total flux cleaned = -0.00221054 Jy ! Component: 3850 - total flux cleaned = -0.00218456 Jy ! Component: 3900 - total flux cleaned = -0.00220523 Jy ! Component: 3950 - total flux cleaned = -0.0022104 Jy ! Component: 4000 - total flux cleaned = -0.00220526 Jy ! Component: 4050 - total flux cleaned = -0.00221035 Jy ! Total flux subtracted in 4096 components = -0.00223066 Jy ! Clean residual min=-0.000380 max=0.000301 Jy/beam ! Clean residual mean=-0.000000 rms=0.000089 Jy/beam ! Combined flux in latest and established models = 0.0870441 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 497 components and 0.087044 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0310-0823_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.908 x 2.297 at -3.942 degrees (North through East) ! Clean map min=-0.0004725 max=0.035807 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0310-0823_X_map.fits wmodel /image_prod/ug002_uva//J0310-0823_X_map.mod ! Writing 497 model components to file: /image_prod/ug002_uva//J0310-0823_X_map.mod wobs /image_prod/ug002_uva//J0310-0823_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0310-0823_X_uvs.fits wwins /image_prod/ug002_uva//J0310-0823_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0310-0823_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0358072 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.91046e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.746536 0.746536 1.49307 2.98614 5.97229 11.9446 23.8891 47.7783 95.5566 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.035 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 401.856 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0310-0823_X_dfm.log closed on Wed Mar 4 19:50:31 2020