! Started logfile: /image_prod/ug002_uva//J0304+6821_X_dfm.log on Wed Mar 4 19:47:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0304+6821_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0304+6821_X_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.956019 visibilities/baseline/integration-bin. ! Found source: J0304+6821 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 24780 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0304+6821_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.036198Jy sigma=8.922055 ! Fit after self-cal, rms=0.741588Jy sigma=6.375722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7383 mas, bmaj=0.8985 mas, bpa=-9.761 degrees ! Estimated noise=1.03822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185139 Jy ! Component: 100 - total flux cleaned = 0.242242 Jy ! Total flux subtracted in 100 components = 0.242242 Jy ! Clean residual min=-0.010094 max=0.028066 Jy/beam ! Clean residual mean=-0.000023 rms=0.002375 Jy/beam ! Combined flux in latest and established models = 0.242242 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.242242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099284Jy sigma=0.826063 ! Fit after self-cal, rms=0.099195Jy sigma=0.825131 ! Inverting map ! Added new window around map position (1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307572 Jy ! Component: 100 - total flux cleaned = 0.0490609 Jy ! Total flux subtracted in 100 components = 0.0490609 Jy ! Clean residual min=-0.008517 max=0.013489 Jy/beam ! Clean residual mean=-0.000019 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.291303 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.291303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081177Jy sigma=0.667508 ! Fit after self-cal, rms=0.080358Jy sigma=0.661951 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149346 Jy ! Component: 100 - total flux cleaned = 0.0255252 Jy ! Total flux subtracted in 100 components = 0.0255252 Jy ! Clean residual min=-0.007017 max=0.010379 Jy/beam ! Clean residual mean=-0.000016 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.316828 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.316828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073625Jy sigma=0.602914 ! Fit after self-cal, rms=0.073223Jy sigma=0.600460 ! Inverting map ! Added new window around map position (3.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113865 Jy ! Component: 100 - total flux cleaned = 0.0199094 Jy ! Total flux subtracted in 100 components = 0.0199094 Jy ! Clean residual min=-0.005807 max=0.007768 Jy/beam ! Clean residual mean=-0.000015 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.336737 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.336737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068875Jy sigma=0.562433 ! Fit after self-cal, rms=0.068635Jy sigma=0.560796 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.959 mas, bmaj=1.138 mas, bpa=-8.441 degrees ! Estimated noise=0.529698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176941 Jy ! Component: 100 - total flux cleaned = 0.0301332 Jy ! Component: 150 - total flux cleaned = 0.039531 Jy ! Component: 200 - total flux cleaned = 0.0467466 Jy ! Total flux subtracted in 200 components = 0.0467466 Jy ! Clean residual min=-0.005855 max=0.009248 Jy/beam ! Clean residual mean=-0.000043 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.383484 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 64 components and 0.383484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062208Jy sigma=0.506822 ! Fit after self-cal, rms=0.061544Jy sigma=0.501117 ! Inverting map ! Added new window around map position (5.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935653 Jy ! Component: 100 - total flux cleaned = 0.0162018 Jy ! Component: 150 - total flux cleaned = 0.021729 Jy ! Component: 200 - total flux cleaned = 0.0262762 Jy ! Total flux subtracted in 200 components = 0.0262762 Jy ! Clean residual min=-0.005500 max=0.007054 Jy/beam ! Clean residual mean=-0.000030 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.40976 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 95 components and 0.40976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059412Jy sigma=0.483179 ! Fit after self-cal, rms=0.059176Jy sigma=0.481075 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.959 x 1.138 at -8.441 degrees (North through East) ! Clean map min=-0.0052837 max=0.24681 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.93 KP 1.05 ! LA 1.01 MK 0.99 NL 1.14 OV 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 HN 1.04 KP 1.03 ! LA 1.01 MK 1.03 OV 0.94 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.92 KP 1.06 ! LA 1.01 MK 0.99 NL 1.12 OV 0.92 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 1.03 KP 1.04 ! LA 1.02 MK 1.01 OV 0.93 PT 0.89 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.92 KP 1.05 ! LA 1.01 MK 1.00 NL 1.15 OV 0.93 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 1.00 KP 1.03 ! LA 1.02 MK 1.05 OV 0.94 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.06 ! LA 0.99 MK 0.97 NL 1.14 OV 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.04 KP 1.02 ! LA 1.01 MK 1.02 OV 0.92 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.92 KP 1.02 ! LA 0.99 MK 1.00 NL 1.14 OV 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 1.03 KP 1.01 ! LA 0.99 MK 1.03 OV 0.95 PT 0.86 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.96 KP 1.06 ! LA 0.98 MK 0.99 NL 1.13 OV 0.92 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.05 KP 1.03 ! LA 1.00 MK 1.05 OV 0.91 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.93 KP 1.04 ! LA 1.00 MK 1.00 NL 1.13 OV 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 1.02 KP 1.03 ! LA 1.02 MK 1.04 OV 0.92 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.95 KP 1.01 ! LA 1.01 MK 0.99 NL 1.15 OV 0.92 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.01 KP 1.03 ! LA 1.00 MK 1.04 OV 0.93 PT 0.88 ! SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.97 KP 1.05 ! LA 0.99 MK 0.98 NL 1.16 OV 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.02 KP 1.02 ! LA 1.00 MK 1.02 OV 0.95 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.95 KP 1.03 ! LA 1.00 MK 0.98 NL 1.13 OV 0.94 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 1.05 KP 1.02 ! LA 1.02 MK 1.03 OV 0.95 PT 0.86 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.95 KP 1.03 ! LA 1.00 MK 1.01 NL 1.14 OV 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 1.04 KP 1.03 ! LA 1.02 MK 1.03 OV 0.92 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.97 KP 1.03 ! LA 1.01 MK 1.00 NL 1.12 OV 0.92 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 HN 1.04 KP 1.01 ! LA 1.00 MK 1.01 OV 0.93 PT 0.87 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.059176Jy sigma=0.481075 ! Fit after self-cal, rms=0.054362Jy sigma=0.442877 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9597 mas, bmaj=1.148 mas, bpa=-8.346 degrees ! Estimated noise=0.526955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471413 Jy ! Component: 100 - total flux cleaned = 0.0079507 Jy ! Component: 150 - total flux cleaned = 0.0088651 Jy ! Component: 200 - total flux cleaned = 0.00928746 Jy ! Total flux subtracted in 200 components = 0.00928746 Jy ! Clean residual min=-0.002914 max=0.002883 Jy/beam ! Clean residual mean=-0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.419048 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.419048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053834Jy sigma=0.437888 ! Fit after self-cal, rms=0.053787Jy sigma=0.437349 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053787Jy sigma=0.437349 ! Fit after self-cal, rms=0.053460Jy sigma=0.429971 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9587 mas, bmaj=1.144 mas, bpa=-9.133 degrees ! Estimated noise=0.52834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015242 Jy ! Component: 100 - total flux cleaned = 0.00265105 Jy ! Component: 150 - total flux cleaned = 0.00358051 Jy ! Component: 200 - total flux cleaned = 0.00430253 Jy ! Total flux subtracted in 200 components = 0.00430253 Jy ! Clean residual min=-0.001731 max=0.001459 Jy/beam ! Clean residual mean=0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.42335 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 140 components and 0.42335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053235Jy sigma=0.427855 ! Fit after self-cal, rms=0.053223Jy sigma=0.427661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000651572 Jy ! Component: 100 - total flux cleaned = 0.0012495 Jy ! Component: 150 - total flux cleaned = 0.00167557 Jy ! Component: 200 - total flux cleaned = 0.00188844 Jy ! Total flux subtracted in 200 components = 0.00188844 Jy ! Clean residual min=-0.001550 max=0.001421 Jy/beam ! Clean residual mean=0.000003 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.425239 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 0.425239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053136Jy sigma=0.426850 ! Fit after self-cal, rms=0.053127Jy sigma=0.426796 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053127Jy sigma=0.426796 ! Fit after self-cal, rms=0.053125Jy sigma=0.426468 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9583 mas, bmaj=1.144 mas, bpa=-9.218 degrees ! Estimated noise=0.527459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552581 Jy ! Component: 100 - total flux cleaned = 0.00105041 Jy ! Component: 150 - total flux cleaned = 0.00148146 Jy ! Component: 200 - total flux cleaned = 0.0017491 Jy ! Total flux subtracted in 200 components = 0.0017491 Jy ! Clean residual min=-0.001313 max=0.001287 Jy/beam ! Clean residual mean=0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.426988 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 154 components and 0.426988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053051Jy sigma=0.425761 ! Fit after self-cal, rms=0.053046Jy sigma=0.425710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.2, 22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805931 Jy ! Component: 100 - total flux cleaned = 0.00121817 Jy ! Component: 150 - total flux cleaned = 0.00148523 Jy ! Component: 200 - total flux cleaned = 0.00170031 Jy ! Total flux subtracted in 200 components = 0.00170031 Jy ! Clean residual min=-0.001236 max=0.001247 Jy/beam ! Clean residual mean=0.000002 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.428688 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 164 components and 0.428688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052997Jy sigma=0.425296 ! Fit after self-cal, rms=0.052994Jy sigma=0.425276 ! Inverting map ! Added new window around map position (0.4, 16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104526 Jy ! Component: 100 - total flux cleaned = 0.00136049 Jy ! Component: 150 - total flux cleaned = 0.00156385 Jy ! Component: 200 - total flux cleaned = 0.00175404 Jy ! Total flux subtracted in 200 components = 0.00175404 Jy ! Clean residual min=-0.001174 max=0.001007 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.430442 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 180 components and 0.430442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052955Jy sigma=0.424937 ! Fit after self-cal, rms=0.052953Jy sigma=0.424930 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052953Jy sigma=0.424930 ! Fit after self-cal, rms=0.052963Jy sigma=0.424792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.336 mas, bmaj=2.446 mas, bpa=-19.82 degrees ! Estimated noise=0.705135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125235 Jy ! Component: 100 - total flux cleaned = 0.00180377 Jy ! Component: 150 - total flux cleaned = 0.00223041 Jy ! Component: 200 - total flux cleaned = 0.00257684 Jy ! Total flux subtracted in 200 components = 0.00257684 Jy ! Clean residual min=-0.001523 max=0.001173 Jy/beam ! Clean residual mean=0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.433019 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 201 components and 0.433019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052945Jy sigma=0.424607 ! Fit after self-cal, rms=0.052943Jy sigma=0.424585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399106 Jy ! Component: 100 - total flux cleaned = 0.000630891 Jy ! Component: 150 - total flux cleaned = 0.000775111 Jy ! Component: 200 - total flux cleaned = 0.000885532 Jy ! Total flux subtracted in 200 components = 0.000885532 Jy ! Clean residual min=-0.001449 max=0.001148 Jy/beam ! Clean residual mean=0.000003 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.433904 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 216 components and 0.433904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052934Jy sigma=0.424501 ! Fit after self-cal, rms=0.052933Jy sigma=0.424491 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9583 mas, bmaj=1.144 mas, bpa=-9.351 degrees ! Estimated noise=0.526945 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9583 x 1.144 at -9.351 degrees (North through East) ! Clean map min=-0.0010315 max=0.24531 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7348 mas, bmaj=0.903 mas, bpa=-10.21 degrees ! Estimated noise=1.03878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18497 Jy ! Component: 100 - total flux cleaned = 0.244496 Jy ! Component: 150 - total flux cleaned = 0.277747 Jy ! Component: 200 - total flux cleaned = 0.298226 Jy ! Total flux subtracted in 200 components = 0.298226 Jy ! Clean residual min=-0.005016 max=0.011452 Jy/beam ! Clean residual mean=-0.000014 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.298226 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.298226 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9583 mas, bmaj=1.144 mas, bpa=-9.351 degrees ! Estimated noise=0.526945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300907 Jy ! Component: 100 - total flux cleaned = 0.0502536 Jy ! Component: 150 - total flux cleaned = 0.0651833 Jy ! Component: 200 - total flux cleaned = 0.0767322 Jy ! Total flux subtracted in 200 components = 0.0767322 Jy ! Clean residual min=-0.003639 max=0.006861 Jy/beam ! Clean residual mean=-0.000026 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.374959 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 71 components and 0.374959 Jy ! Inverting map ! Added new window around map position (4.2, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911052 Jy ! Component: 100 - total flux cleaned = 0.0163842 Jy ! Component: 150 - total flux cleaned = 0.0222898 Jy ! Component: 200 - total flux cleaned = 0.0271352 Jy ! Total flux subtracted in 200 components = 0.0271352 Jy ! Clean residual min=-0.002104 max=0.002942 Jy/beam ! Clean residual mean=-0.000012 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.402094 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 108 components and 0.402094 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040338 Jy ! Component: 100 - total flux cleaned = 0.00743403 Jy ! Component: 150 - total flux cleaned = 0.0103356 Jy ! Component: 200 - total flux cleaned = 0.0128252 Jy ! Total flux subtracted in 200 components = 0.0128252 Jy ! Clean residual min=-0.001493 max=0.001551 Jy/beam ! Clean residual mean=-0.000005 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.414919 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 148 components and 0.414919 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.336 mas, bmaj=2.446 mas, bpa=-19.82 degrees ! Estimated noise=0.705135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446949 Jy ! Component: 100 - total flux cleaned = 0.00751225 Jy ! Component: 150 - total flux cleaned = 0.00974987 Jy ! Component: 200 - total flux cleaned = 0.0115244 Jy ! Total flux subtracted in 200 components = 0.0115244 Jy ! Clean residual min=-0.001524 max=0.001489 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.426444 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145992 Jy ! Component: 100 - total flux cleaned = 0.00266629 Jy ! Component: 150 - total flux cleaned = 0.00366693 Jy ! Component: 200 - total flux cleaned = 0.0045021 Jy ! Total flux subtracted in 200 components = 0.0045021 Jy ! Clean residual min=-0.001406 max=0.001256 Jy/beam ! Clean residual mean=0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.430946 Jy ! Adding 134 model components to the UV plane model. ! The established model now contains 260 components and 0.430946 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9583 mas, bmaj=1.144 mas, bpa=-9.351 degrees ! Estimated noise=0.526945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051568 Jy ! Component: 100 - total flux cleaned = 0.000916348 Jy ! Component: 150 - total flux cleaned = 0.00132849 Jy ! Component: 200 - total flux cleaned = 0.00167649 Jy ! Total flux subtracted in 200 components = 0.00167649 Jy ! Clean residual min=-0.001002 max=0.001072 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.432622 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 280 components and 0.432622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052914Jy sigma=0.424314 ! Fit after self-cal, rms=0.052895Jy sigma=0.424187 wmodel J0304+6821_X_map.mod ! Writing 280 model components to file: J0304+6821_X_map.mod wobs J0304+6821_X_uvs.fits ! Writing UV FITS file: J0304+6821_X_uvs.fits wwins J0304+6821_X_map.win ! wwins: Wrote 9 windows to J0304+6821_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.91456e-05 Jy ! Component: 100 - total flux cleaned = -0.000226768 Jy ! Component: 150 - total flux cleaned = -0.000293382 Jy ! Component: 200 - total flux cleaned = -0.000325583 Jy ! Component: 250 - total flux cleaned = -0.00034131 Jy ! Component: 300 - total flux cleaned = -0.00038748 Jy ! Component: 350 - total flux cleaned = -0.000341714 Jy ! Component: 400 - total flux cleaned = -0.000371581 Jy ! Component: 450 - total flux cleaned = -0.000312375 Jy ! Component: 500 - total flux cleaned = -0.000327111 Jy ! Component: 550 - total flux cleaned = -0.000298478 Jy ! Component: 600 - total flux cleaned = -0.00028464 Jy ! Component: 650 - total flux cleaned = -0.000326774 Jy ! Component: 700 - total flux cleaned = -0.000326737 Jy ! Component: 750 - total flux cleaned = -0.000313012 Jy ! Component: 800 - total flux cleaned = -0.000285867 Jy ! Component: 850 - total flux cleaned = -0.000259134 Jy ! Component: 900 - total flux cleaned = -0.000259362 Jy ! Component: 950 - total flux cleaned = -0.000259323 Jy ! Component: 1000 - total flux cleaned = -0.000246223 Jy ! Component: 1050 - total flux cleaned = -0.000246209 Jy ! Component: 1100 - total flux cleaned = -0.000246189 Jy ! Component: 1150 - total flux cleaned = -0.00020811 Jy ! Component: 1200 - total flux cleaned = -0.00024583 Jy ! Component: 1250 - total flux cleaned = -0.000220863 Jy ! Component: 1300 - total flux cleaned = -0.0002209 Jy ! Component: 1350 - total flux cleaned = -0.000184191 Jy ! Component: 1400 - total flux cleaned = -0.000184192 Jy ! Component: 1450 - total flux cleaned = -0.000111933 Jy ! Component: 1500 - total flux cleaned = -0.000123969 Jy ! Component: 1550 - total flux cleaned = -5.26115e-05 Jy ! Component: 1600 - total flux cleaned = -1.73881e-05 Jy ! Component: 1650 - total flux cleaned = 5.262e-05 Jy ! Component: 1700 - total flux cleaned = 6.42874e-05 Jy ! Component: 1750 - total flux cleaned = 6.42184e-05 Jy ! Component: 1800 - total flux cleaned = 0.000121516 Jy ! Component: 1850 - total flux cleaned = 0.000121581 Jy ! Component: 1900 - total flux cleaned = 9.91984e-05 Jy ! Component: 1950 - total flux cleaned = 0.000166501 Jy ! Component: 2000 - total flux cleaned = 0.000188767 Jy ! Component: 2050 - total flux cleaned = 0.000221943 Jy ! Component: 2100 - total flux cleaned = 0.000221829 Jy ! Component: 2150 - total flux cleaned = 0.000287409 Jy ! Component: 2200 - total flux cleaned = 0.000276541 Jy ! Component: 2250 - total flux cleaned = 0.000351997 Jy ! Component: 2300 - total flux cleaned = 0.000362718 Jy ! Component: 2350 - total flux cleaned = 0.000426705 Jy ! Component: 2400 - total flux cleaned = 0.000458571 Jy ! Component: 2450 - total flux cleaned = 0.000521658 Jy ! Component: 2500 - total flux cleaned = 0.000542546 Jy ! Component: 2550 - total flux cleaned = 0.00058423 Jy ! Component: 2600 - total flux cleaned = 0.000594585 Jy ! Component: 2650 - total flux cleaned = 0.000604803 Jy ! Component: 2700 - total flux cleaned = 0.000666185 Jy ! Component: 2750 - total flux cleaned = 0.000727297 Jy ! Component: 2800 - total flux cleaned = 0.000686776 Jy ! Component: 2850 - total flux cleaned = 0.000706982 Jy ! Component: 2900 - total flux cleaned = 0.000737018 Jy ! Component: 2950 - total flux cleaned = 0.000786842 Jy ! Component: 3000 - total flux cleaned = 0.000766896 Jy ! Component: 3050 - total flux cleaned = 0.000806291 Jy ! Component: 3100 - total flux cleaned = 0.000816014 Jy ! Component: 3150 - total flux cleaned = 0.000845315 Jy ! Component: 3200 - total flux cleaned = 0.000835609 Jy ! Component: 3250 - total flux cleaned = 0.000835668 Jy ! Component: 3300 - total flux cleaned = 0.000854903 Jy ! Component: 3350 - total flux cleaned = 0.000874126 Jy ! Component: 3400 - total flux cleaned = 0.000921791 Jy ! Component: 3450 - total flux cleaned = 0.000893254 Jy ! Component: 3500 - total flux cleaned = 0.000883843 Jy ! Component: 3550 - total flux cleaned = 0.000893217 Jy ! Component: 3600 - total flux cleaned = 0.000893243 Jy ! Component: 3650 - total flux cleaned = 0.00086534 Jy ! Component: 3700 - total flux cleaned = 0.000920873 Jy ! Component: 3750 - total flux cleaned = 0.000902453 Jy ! Component: 3800 - total flux cleaned = 0.000893302 Jy ! Component: 3850 - total flux cleaned = 0.000920614 Jy ! Component: 3900 - total flux cleaned = 0.000920566 Jy ! Component: 3950 - total flux cleaned = 0.000938633 Jy ! Component: 4000 - total flux cleaned = 0.000902647 Jy ! Component: 4050 - total flux cleaned = 0.000884706 Jy ! Total flux subtracted in 4096 components = 0.000902554 Jy ! Clean residual min=-0.000556 max=0.000510 Jy/beam ! Clean residual mean=0.000000 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.433525 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 607 components and 0.433525 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0304+6821_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9583 x 1.144 at -9.351 degrees (North through East) ! Clean map min=-0.000733 max=0.24508 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0304+6821_X_map.fits wmodel /image_prod/ug002_uva//J0304+6821_X_map.mod ! Writing 607 model components to file: /image_prod/ug002_uva//J0304+6821_X_map.mod wobs /image_prod/ug002_uva//J0304+6821_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0304+6821_X_uvs.fits wwins /image_prod/ug002_uva//J0304+6821_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0304+6821_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.245075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00015118 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.185061 0.185061 0.370123 0.740246 1.48049 2.96098 5.92196 11.8439 23.6879 47.3757 94.7514 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.245 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1621.08 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0304+6821_X_dfm.log closed on Wed Mar 4 19:47:53 2020