! Started logfile: /image_prod/ug002_uva//J0300-0531_X_dfm.log on Wed Mar  4 19:45:30 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0300-0531_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0300-0531_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924815 visibilities/baseline/integration-bin.
! Found source: J0300-0531
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29964 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0300-0531_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006109Jy  sigma=8.765435
! Fit after  self-cal, rms=0.923375Jy  sigma=7.975198
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6432 mas, bmaj=1.687 mas, bpa=-1.98 degrees
! Estimated noise=0.885316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0522861 Jy
! Component: 100  -  total flux cleaned = 0.0763121 Jy
! Total flux subtracted in 100 components = 0.0763121 Jy
! Clean residual min=-0.005277 max=0.017151 Jy/beam
! Clean residual mean=0.000000 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.0763121 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0763121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077764Jy  sigma=0.591477
! Fit after  self-cal, rms=0.076719Jy  sigma=0.585367
! Inverting map 
! Added new window around map position (-0.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178058 Jy
! Component: 100  -  total flux cleaned = 0.0281058 Jy
! Total flux subtracted in 100 components = 0.0281058 Jy
! Clean residual min=-0.003714 max=0.010424 Jy/beam
! Clean residual mean=-0.000000 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.104418 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.104418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070446Jy  sigma=0.511194
! Fit after  self-cal, rms=0.069674Jy  sigma=0.507848
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00956963 Jy
! Component: 100  -  total flux cleaned = 0.0145253 Jy
! Total flux subtracted in 100 components = 0.0145253 Jy
! Clean residual min=-0.003101 max=0.005809 Jy/beam
! Clean residual mean=-0.000000 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.118943 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 29 components and 0.118943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067895Jy  sigma=0.487285
! Fit after  self-cal, rms=0.067531Jy  sigma=0.485511
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00566485 Jy
! Component: 100  -  total flux cleaned = 0.00700066 Jy
! Total flux subtracted in 100 components = 0.00700066 Jy
! Clean residual min=-0.002889 max=0.004122 Jy/beam
! Clean residual mean=-0.000001 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.125944 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 36 components and 0.125944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067046Jy  sigma=0.480380
! Fit after  self-cal, rms=0.066906Jy  sigma=0.479330
! Inverting map 
! Added new window around map position (-1.6, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376571 Jy
! Component: 100  -  total flux cleaned = 0.00397391 Jy
! Total flux subtracted in 100 components = 0.00397391 Jy
! Clean residual min=-0.002782 max=0.003553 Jy/beam
! Clean residual mean=-0.000001 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.129918 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 0.129918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066650Jy  sigma=0.476926
! Fit after  self-cal, rms=0.066610Jy  sigma=0.476364
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8379 mas, bmaj=2.02 mas, bpa=-1.864 degrees
! Estimated noise=0.484701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438279 Jy
! Component: 100  -  total flux cleaned = 0.00720698 Jy
! Component: 150  -  total flux cleaned = 0.00859818 Jy
! Component: 200  -  total flux cleaned = 0.0096837 Jy
! Total flux subtracted in 200 components = 0.0096837 Jy
! Clean residual min=-0.002639 max=0.002323 Jy/beam
! Clean residual mean=-0.000000 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.139601 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.139601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066254Jy  sigma=0.472627
! Fit after  self-cal, rms=0.066175Jy  sigma=0.472300
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8379 x 2.02 at -1.864 degrees (North through East)
! Clean map  min=-0.0024745  max=0.074572 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.97     KP        1.01     
!   LA        1.03     MK        1.02     NL        1.06     OV        0.94     
!   PT        0.92     SC        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.92     KP        1.02     
!   LA        1.04     MK        1.04     NL        1.06     OV        0.94     
!   PT        0.93     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.92     KP        1.02     
!   LA        1.06     MK        1.03     NL        1.07     OV        0.91     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.97     KP        1.04     
!   LA        1.04     MK        1.05     NL        1.08     OV        0.90     
!   PT        0.92     SC        0.91     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.91     KP        1.06     
!   LA        1.03     MK        1.05     NL        1.05     OV        0.91     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.99     KP        1.03     
!   LA        1.04     MK        0.97     NL        1.09     OV        0.94     
!   PT        0.92     SC        0.85     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.97     KP        1.05     
!   LA        1.05     MK        1.04     NL        1.04     OV        0.94     
!   PT        0.95     SC        0.89     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.98     KP        1.06     
!   LA        1.04     MK        1.05     NL        1.05     OV        0.93     
!   PT        0.91     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.97     KP        1.04     
!   LA        1.04     MK        1.01     NL        1.08     OV        0.93     
!   PT        0.91     SC        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.02     KP        1.02     
!   LA        1.04     MK        0.99     NL        1.06     OV        0.91     
!   PT        0.94     SC        0.83     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.97     KP        1.04     
!   LA        1.03     MK        1.00     NL        1.09     OV        0.94     
!   PT        0.93     SC        0.77     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        1.01     
!   LA        1.07     MK        0.96     NL        1.06     OV        0.93     
!   PT        0.90     SC        0.82     
! 
! 
! Fit before self-cal, rms=0.066175Jy  sigma=0.472300
! Fit after  self-cal, rms=0.062623Jy  sigma=0.467925
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8291 mas, bmaj=1.991 mas, bpa=-0.3863 degrees
! Estimated noise=0.472741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192326 Jy
! Component: 100  -  total flux cleaned = 0.00229732 Jy
! Component: 150  -  total flux cleaned = 0.00245817 Jy
! Component: 200  -  total flux cleaned = 0.00264256 Jy
! Total flux subtracted in 200 components = 0.00264256 Jy
! Clean residual min=-0.001223 max=0.001493 Jy/beam
! Clean residual mean=0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.142244 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.142244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062499Jy  sigma=0.466781
! Fit after  self-cal, rms=0.062441Jy  sigma=0.466514
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062441Jy  sigma=0.466514
! Fit after  self-cal, rms=0.062400Jy  sigma=0.465034
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8183 mas, bmaj=1.973 mas, bpa=0.05981 degrees
! Estimated noise=0.467364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000636846 Jy
! Component: 100  -  total flux cleaned = 0.000772519 Jy
! Component: 150  -  total flux cleaned = 0.000966053 Jy
! Component: 200  -  total flux cleaned = 0.00116454 Jy
! Total flux subtracted in 200 components = 0.00116454 Jy
! Clean residual min=-0.001145 max=0.001297 Jy/beam
! Clean residual mean=-0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.143409 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.143409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062341Jy  sigma=0.464472
! Fit after  self-cal, rms=0.062347Jy  sigma=0.464377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.6, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128199 Jy
! Component: 100  -  total flux cleaned = 0.0016875 Jy
! Component: 150  -  total flux cleaned = 0.00187748 Jy
! Component: 200  -  total flux cleaned = 0.00204883 Jy
! Total flux subtracted in 200 components = 0.00204883 Jy
! Clean residual min=-0.001069 max=0.001069 Jy/beam
! Clean residual mean=-0.000000 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.145457 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.145457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062301Jy  sigma=0.463967
! Fit after  self-cal, rms=0.062292Jy  sigma=0.463929
! Inverting map 
! Added new window around map position (-20.4, -25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535999 Jy
! Component: 100  -  total flux cleaned = 0.000625221 Jy
! Component: 150  -  total flux cleaned = 0.000652185 Jy
! Component: 200  -  total flux cleaned = 0.000702811 Jy
! Total flux subtracted in 200 components = 0.000702811 Jy
! Clean residual min=-0.000989 max=0.000969 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.14616 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 108 components and 0.14616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062259Jy  sigma=0.463679
! Fit after  self-cal, rms=0.062250Jy  sigma=0.463658
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062250Jy  sigma=0.463658
! Fit after  self-cal, rms=0.062186Jy  sigma=0.463439
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8107 mas, bmaj=1.96 mas, bpa=0.3462 degrees
! Estimated noise=0.461968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202713 Jy
! Component: 100  -  total flux cleaned = 0.000252821 Jy
! Component: 150  -  total flux cleaned = 0.000301584 Jy
! Component: 200  -  total flux cleaned = 0.00041175 Jy
! Total flux subtracted in 200 components = 0.00041175 Jy
! Clean residual min=-0.000947 max=0.000910 Jy/beam
! Clean residual mean=-0.000000 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.146572 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.146572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062161Jy  sigma=0.463258
! Fit after  self-cal, rms=0.062171Jy  sigma=0.463234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182403 Jy
! Component: 100  -  total flux cleaned = 0.000224645 Jy
! Component: 150  -  total flux cleaned = 0.000244198 Jy
! Component: 200  -  total flux cleaned = 0.000280952 Jy
! Total flux subtracted in 200 components = 0.000280952 Jy
! Clean residual min=-0.000920 max=0.000890 Jy/beam
! Clean residual mean=-0.000000 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.146853 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 128 components and 0.146853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062156Jy  sigma=0.463128
! Fit after  self-cal, rms=0.062138Jy  sigma=0.463111
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062138Jy  sigma=0.463111
! Fit after  self-cal, rms=0.061876Jy  sigma=0.463078
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.146 mas, bmaj=3.645 mas, bpa=4.068 degrees
! Estimated noise=0.600595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.19392e-05 Jy
! Component: 100  -  total flux cleaned = -7.96451e-05 Jy
! Component: 150  -  total flux cleaned = -6.76697e-05 Jy
! Component: 200  -  total flux cleaned = -7.85895e-05 Jy
! Total flux subtracted in 200 components = -7.85895e-05 Jy
! Clean residual min=-0.001210 max=0.000940 Jy/beam
! Clean residual mean=0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.146774 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 144 components and 0.146774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061872Jy  sigma=0.463060
! Fit after  self-cal, rms=0.061873Jy  sigma=0.463054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.95302e-05 Jy
! Component: 100  -  total flux cleaned = 2.21132e-05 Jy
! Component: 150  -  total flux cleaned = 2.25257e-05 Jy
! Component: 200  -  total flux cleaned = 3.06171e-05 Jy
! Total flux subtracted in 200 components = 3.06171e-05 Jy
! Clean residual min=-0.001189 max=0.000937 Jy/beam
! Clean residual mean=0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.146805 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 155 components and 0.146805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061872Jy  sigma=0.463042
! Fit after  self-cal, rms=0.061871Jy  sigma=0.463042
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8073 mas, bmaj=1.953 mas, bpa=0.4679 degrees
! Estimated noise=0.459307 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8073 x 1.953 at 0.4679 degrees (North through East)
! Clean map  min=-0.00083954  max=0.07148 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6249 mas, bmaj=1.647 mas, bpa=0.245 degrees
! Estimated noise=0.811032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0510537 Jy
! Component: 100  -  total flux cleaned = 0.0784286 Jy
! Component: 150  -  total flux cleaned = 0.0956994 Jy
! Component: 200  -  total flux cleaned = 0.107184 Jy
! Total flux subtracted in 200 components = 0.107184 Jy
! Clean residual min=-0.003105 max=0.006230 Jy/beam
! Clean residual mean=0.000000 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.107184 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.107184 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8073 mas, bmaj=1.953 mas, bpa=0.4679 degrees
! Estimated noise=0.459307 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123496 Jy
! Component: 100  -  total flux cleaned = 0.0189358 Jy
! Component: 150  -  total flux cleaned = 0.0233948 Jy
! Component: 200  -  total flux cleaned = 0.026709 Jy
! Total flux subtracted in 200 components = 0.026709 Jy
! Clean residual min=-0.001448 max=0.002059 Jy/beam
! Clean residual mean=0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.133893 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 41 components and 0.133893 Jy
! Inverting map 
! Added new window around map position (10.6, -11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002597 Jy
! Component: 100  -  total flux cleaned = 0.00466118 Jy
! Component: 150  -  total flux cleaned = 0.00636515 Jy
! Component: 200  -  total flux cleaned = 0.00779537 Jy
! Total flux subtracted in 200 components = 0.00779537 Jy
! Clean residual min=-0.001082 max=0.001131 Jy/beam
! Clean residual mean=0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.141688 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 64 components and 0.141688 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.146 mas, bmaj=3.645 mas, bpa=4.068 degrees
! Estimated noise=0.600595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019149 Jy
! Component: 100  -  total flux cleaned = 0.00311982 Jy
! Component: 150  -  total flux cleaned = 0.00374658 Jy
! Component: 200  -  total flux cleaned = 0.00420216 Jy
! Total flux subtracted in 200 components = 0.00420216 Jy
! Clean residual min=-0.001182 max=0.001121 Jy/beam
! Clean residual mean=0.000000 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.14589 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366563 Jy
! Component: 100  -  total flux cleaned = 0.000560766 Jy
! Component: 150  -  total flux cleaned = 0.000712433 Jy
! Component: 200  -  total flux cleaned = 0.000788021 Jy
! Total flux subtracted in 200 components = 0.000788021 Jy
! Clean residual min=-0.001118 max=0.001053 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.146678 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 105 components and 0.146678 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8073 mas, bmaj=1.953 mas, bpa=0.4679 degrees
! Estimated noise=0.459307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226478 Jy
! Component: 100  -  total flux cleaned = -0.000124781 Jy
! Component: 150  -  total flux cleaned = -3.68991e-05 Jy
! Component: 200  -  total flux cleaned = 6.51104e-05 Jy
! Total flux subtracted in 200 components = 6.51104e-05 Jy
! Clean residual min=-0.000888 max=0.000965 Jy/beam
! Clean residual mean=0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.146743 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 120 components and 0.146744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061894Jy  sigma=0.463139
! Fit after  self-cal, rms=0.061916Jy  sigma=0.462966
wmodel J0300-0531_X_map.mod
! Writing 120 model components to file: J0300-0531_X_map.mod
wobs   J0300-0531_X_uvs.fits
! Writing UV FITS file: J0300-0531_X_uvs.fits
wwins  J0300-0531_X_map.win
! wwins: Wrote 8 windows to J0300-0531_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144541 Jy
! Component: 100  -  total flux cleaned = 6.47691e-05 Jy
! Component: 150  -  total flux cleaned = -2.66264e-05 Jy
! Component: 200  -  total flux cleaned = -0.000174841 Jy
! Component: 250  -  total flux cleaned = -0.000290349 Jy
! Component: 300  -  total flux cleaned = -0.000445584 Jy
! Component: 350  -  total flux cleaned = -0.000528544 Jy
! Component: 400  -  total flux cleaned = -0.00062354 Jy
! Component: 450  -  total flux cleaned = -0.000703537 Jy
! Component: 500  -  total flux cleaned = -0.000769287 Jy
! Component: 550  -  total flux cleaned = -0.000847201 Jy
! Component: 600  -  total flux cleaned = -0.000872884 Jy
! Component: 650  -  total flux cleaned = -0.000885496 Jy
! Component: 700  -  total flux cleaned = -0.000923133 Jy
! Component: 750  -  total flux cleaned = -0.000959993 Jy
! Component: 800  -  total flux cleaned = -0.000947704 Jy
! Component: 850  -  total flux cleaned = -0.00100793 Jy
! Component: 900  -  total flux cleaned = -0.000996259 Jy
! Component: 950  -  total flux cleaned = -0.00103181 Jy
! Component: 1000  -  total flux cleaned = -0.00107858 Jy
! Component: 1050  -  total flux cleaned = -0.00118243 Jy
! Component: 1100  -  total flux cleaned = -0.00117078 Jy
! Component: 1150  -  total flux cleaned = -0.00125027 Jy
! Component: 1200  -  total flux cleaned = -0.0012952 Jy
! Component: 1250  -  total flux cleaned = -0.00133984 Jy
! Component: 1300  -  total flux cleaned = -0.00137321 Jy
! Component: 1350  -  total flux cleaned = -0.00142818 Jy
! Component: 1400  -  total flux cleaned = -0.00144999 Jy
! Component: 1450  -  total flux cleaned = -0.00146078 Jy
! Component: 1500  -  total flux cleaned = -0.00151451 Jy
! Component: 1550  -  total flux cleaned = -0.00156778 Jy
! Component: 1600  -  total flux cleaned = -0.00159952 Jy
! Component: 1650  -  total flux cleaned = -0.0016519 Jy
! Component: 1700  -  total flux cleaned = -0.00174556 Jy
! Component: 1750  -  total flux cleaned = -0.0017869 Jy
! Component: 1800  -  total flux cleaned = -0.00185872 Jy
! Component: 1850  -  total flux cleaned = -0.00191986 Jy
! Component: 1900  -  total flux cleaned = -0.00197071 Jy
! Component: 1950  -  total flux cleaned = -0.00206139 Jy
! Component: 2000  -  total flux cleaned = -0.00212154 Jy
! Component: 2050  -  total flux cleaned = -0.00216143 Jy
! Component: 2100  -  total flux cleaned = -0.00225035 Jy
! Component: 2150  -  total flux cleaned = -0.00229958 Jy
! Component: 2200  -  total flux cleaned = -0.00239726 Jy
! Component: 2250  -  total flux cleaned = -0.00239711 Jy
! Component: 2300  -  total flux cleaned = -0.00245506 Jy
! Component: 2350  -  total flux cleaned = -0.00249345 Jy
! Component: 2400  -  total flux cleaned = -0.00254112 Jy
! Component: 2450  -  total flux cleaned = -0.00256004 Jy
! Component: 2500  -  total flux cleaned = -0.00257897 Jy
! Component: 2550  -  total flux cleaned = -0.00263531 Jy
! Component: 2600  -  total flux cleaned = -0.00266333 Jy
! Component: 2650  -  total flux cleaned = -0.00270967 Jy
! Component: 2700  -  total flux cleaned = -0.00274659 Jy
! Component: 2750  -  total flux cleaned = -0.00282894 Jy
! Component: 2800  -  total flux cleaned = -0.00287451 Jy
! Component: 2850  -  total flux cleaned = -0.00287447 Jy
! Component: 2900  -  total flux cleaned = -0.00291956 Jy
! Component: 2950  -  total flux cleaned = -0.0029554 Jy
! Component: 3000  -  total flux cleaned = -0.00299106 Jy
! Component: 3050  -  total flux cleaned = -0.00304424 Jy
! Component: 3100  -  total flux cleaned = -0.00305306 Jy
! Component: 3150  -  total flux cleaned = -0.00309705 Jy
! Component: 3200  -  total flux cleaned = -0.00307961 Jy
! Component: 3250  -  total flux cleaned = -0.00316664 Jy
! Component: 3300  -  total flux cleaned = -0.003132 Jy
! Component: 3350  -  total flux cleaned = -0.0031665 Jy
! Component: 3400  -  total flux cleaned = -0.00320944 Jy
! Component: 3450  -  total flux cleaned = -0.00325204 Jy
! Component: 3500  -  total flux cleaned = -0.00326904 Jy
! Component: 3550  -  total flux cleaned = -0.00326906 Jy
! Component: 3600  -  total flux cleaned = -0.00329416 Jy
! Component: 3650  -  total flux cleaned = -0.00331087 Jy
! Component: 3700  -  total flux cleaned = -0.00334414 Jy
! Component: 3750  -  total flux cleaned = -0.0033524 Jy
! Component: 3800  -  total flux cleaned = -0.00330291 Jy
! Component: 3850  -  total flux cleaned = -0.00337684 Jy
! Component: 3900  -  total flux cleaned = -0.0033442 Jy
! Component: 3950  -  total flux cleaned = -0.00336865 Jy
! Component: 4000  -  total flux cleaned = -0.00338487 Jy
! Component: 4050  -  total flux cleaned = -0.00340105 Jy
! Total flux subtracted in 4096 components = -0.0033609 Jy
! Clean residual min=-0.000527 max=0.000555 Jy/beam
! Clean residual mean=0.000000 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.143383 Jy
keep
! Adding 326 model components to the UV plane model.
! The established model now contains 446 components and 0.143383 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0300-0531_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8073 x 1.953 at 0.4679 degrees (North through East)
! Clean map  min=-0.00069831  max=0.071078 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0300-0531_X_map.fits
wmodel /image_prod/ug002_uva//J0300-0531_X_map.mod
! Writing 446 model components to file: /image_prod/ug002_uva//J0300-0531_X_map.mod
wobs   /image_prod/ug002_uva//J0300-0531_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0300-0531_X_uvs.fits
wwins  /image_prod/ug002_uva//J0300-0531_X_map.win
! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0300-0531_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0710781 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000141709 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.59811 0.59811 1.19622 2.39244 4.78488 9.56977 19.1395 38.2791 76.5581
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  501.579 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0300-0531_X_dfm.log closed on Wed Mar  4 19:45:36 2020