! Started logfile: /image_prod/ug002_uva//J0232-2839_S_dfm.log on Wed Mar 4 19:36:04 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0232-2839_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0232-2839_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.994286 visibilities/baseline/integration-bin. ! Found source: J0232-2839 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4176 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0232-2839_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.013158Jy sigma=5.761280 ! Fit after self-cal, rms=0.923599Jy sigma=5.250654 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.286 mas, bmaj=6.306 mas, bpa=-8.056 degrees ! Estimated noise=2.84917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635564 Jy ! Component: 100 - total flux cleaned = 0.0780798 Jy ! Total flux subtracted in 100 components = 0.0780798 Jy ! Clean residual min=-0.006874 max=0.008126 Jy/beam ! Clean residual mean=-0.000018 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.0780798 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0780798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091973Jy sigma=0.456072 ! Fit after self-cal, rms=0.091214Jy sigma=0.451275 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=7.231 mas, bpa=-7.199 degrees ! Estimated noise=1.99509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588513 Jy ! Component: 100 - total flux cleaned = 0.0086408 Jy ! Component: 150 - total flux cleaned = 0.0100366 Jy ! Component: 200 - total flux cleaned = 0.0102644 Jy ! Total flux subtracted in 200 components = 0.0102644 Jy ! Clean residual min=-0.004365 max=0.004815 Jy/beam ! Clean residual mean=-0.000029 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0883442 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.0883442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090927Jy sigma=0.448528 ! Fit after self-cal, rms=0.090950Jy sigma=0.448450 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.683 x 7.231 at -7.199 degrees (North through East) ! Clean map min=-0.0040652 max=0.081786 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.21 LA 0.97 MK 0.97 ! NL 0.93 OV 1.02 PT 0.97 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 HN 1.28 LA 0.94 MK 1.01 ! NL 1.06 OV 0.95 PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.24 LA 0.96 MK 1.03 ! NL 0.91 OV 0.94 PT 0.94 SC 0.98 ! ! ! Fit before self-cal, rms=0.090950Jy sigma=0.448450 ! Fit after self-cal, rms=0.099050Jy sigma=0.444970 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.698 mas, bmaj=7.178 mas, bpa=-6.756 degrees ! Estimated noise=1.99496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.11053e-05 Jy ! Component: 100 - total flux cleaned = -1.1387e-05 Jy ! Component: 150 - total flux cleaned = -3.50346e-05 Jy ! Component: 200 - total flux cleaned = -7.7248e-05 Jy ! Total flux subtracted in 200 components = -7.7248e-05 Jy ! Clean residual min=-0.004159 max=0.003926 Jy/beam ! Clean residual mean=-0.000014 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0882669 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.0882669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099034Jy sigma=0.444909 ! Fit after self-cal, rms=0.099364Jy sigma=0.444695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099364Jy sigma=0.444695 ! Fit after self-cal, rms=0.100286Jy sigma=0.444672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.169 mas, bpa=-6.573 degrees ! Estimated noise=1.9973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.36921e-05 Jy ! Component: 100 - total flux cleaned = 5.39262e-05 Jy ! Component: 150 - total flux cleaned = 3.42867e-05 Jy ! Component: 200 - total flux cleaned = -5.88051e-07 Jy ! Total flux subtracted in 200 components = -5.88051e-07 Jy ! Clean residual min=-0.004091 max=0.003800 Jy/beam ! Clean residual mean=-0.000015 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.0882664 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.0882663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100274Jy sigma=0.444628 ! Fit after self-cal, rms=0.100303Jy sigma=0.444621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81084e-05 Jy ! Component: 100 - total flux cleaned = -2.86554e-05 Jy ! Component: 150 - total flux cleaned = -6.07096e-05 Jy ! Component: 200 - total flux cleaned = -7.56622e-05 Jy ! Total flux subtracted in 200 components = -7.56622e-05 Jy ! Clean residual min=-0.004078 max=0.003773 Jy/beam ! Clean residual mean=-0.000015 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0881907 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0881907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100298Jy sigma=0.444592 ! Fit after self-cal, rms=0.100299Jy sigma=0.444589 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100299Jy sigma=0.444589 ! Fit after self-cal, rms=0.103383Jy sigma=0.442439 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.206 mas, bpa=-6.517 degrees ! Estimated noise=1.9972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.76775e-05 Jy ! Component: 100 - total flux cleaned = -4.00735e-05 Jy ! Component: 150 - total flux cleaned = -1.39976e-05 Jy ! Component: 200 - total flux cleaned = 8.71908e-06 Jy ! Total flux subtracted in 200 components = 8.71908e-06 Jy ! Clean residual min=-0.004067 max=0.002983 Jy/beam ! Clean residual mean=-0.000023 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0881994 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0881994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103380Jy sigma=0.442407 ! Fit after self-cal, rms=0.103521Jy sigma=0.442235 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.5244e-05 Jy ! Component: 100 - total flux cleaned = -5.33758e-06 Jy ! Component: 150 - total flux cleaned = -5.21845e-06 Jy ! Component: 200 - total flux cleaned = -5.14827e-06 Jy ! Total flux subtracted in 200 components = -5.14827e-06 Jy ! Clean residual min=-0.004087 max=0.002952 Jy/beam ! Clean residual mean=-0.000022 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.0881942 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0881942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103520Jy sigma=0.442224 ! Fit after self-cal, rms=0.103522Jy sigma=0.442223 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103522Jy sigma=0.442223 ! Fit after self-cal, rms=0.104262Jy sigma=0.442199 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.725 mas, bmaj=17.35 mas, bpa=-0.5169 degrees ! Estimated noise=2.68311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309862 Jy ! Component: 100 - total flux cleaned = 0.00026149 Jy ! Component: 150 - total flux cleaned = 0.000240069 Jy ! Component: 200 - total flux cleaned = 0.000204402 Jy ! Total flux subtracted in 200 components = 0.000204402 Jy ! Clean residual min=-0.004959 max=0.003568 Jy/beam ! Clean residual mean=-0.000055 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0883986 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.0883986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104266Jy sigma=0.442229 ! Fit after self-cal, rms=0.104291Jy sigma=0.442213 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.19332e-07 Jy ! Component: 100 - total flux cleaned = -1.7925e-05 Jy ! Component: 150 - total flux cleaned = -3.48086e-05 Jy ! Component: 200 - total flux cleaned = -5.03019e-05 Jy ! Total flux subtracted in 200 components = -5.03019e-05 Jy ! Clean residual min=-0.004977 max=0.003534 Jy/beam ! Clean residual mean=-0.000055 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.0883483 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.0883483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104298Jy sigma=0.442249 ! Fit after self-cal, rms=0.104300Jy sigma=0.442242 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=7.217 mas, bpa=-6.454 degrees ! Estimated noise=1.99975 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.701 x 7.217 at -6.454 degrees (North through East) ! Clean map min=-0.0039974 max=0.082682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=6.292 mas, bpa=-7.268 degrees ! Estimated noise=2.85499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.063598 Jy ! Component: 100 - total flux cleaned = 0.0783724 Jy ! Component: 150 - total flux cleaned = 0.0847825 Jy ! Component: 200 - total flux cleaned = 0.087304 Jy ! Total flux subtracted in 200 components = 0.087304 Jy ! Clean residual min=-0.006130 max=0.005345 Jy/beam ! Clean residual mean=-0.000011 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.087304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.087304 Jy ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=7.217 mas, bpa=-6.454 degrees ! Estimated noise=1.99975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706444 Jy ! Component: 100 - total flux cleaned = 0.000885963 Jy ! Component: 150 - total flux cleaned = 0.000920447 Jy ! Component: 200 - total flux cleaned = 0.000891138 Jy ! Total flux subtracted in 200 components = 0.000891138 Jy ! Clean residual min=-0.004124 max=0.002957 Jy/beam ! Clean residual mean=-0.000023 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0881951 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0881951 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.725 mas, bmaj=17.35 mas, bpa=-0.5169 degrees ! Estimated noise=2.68311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022913 Jy ! Component: 100 - total flux cleaned = 0.000230078 Jy ! Component: 150 - total flux cleaned = 0.000198135 Jy ! Component: 200 - total flux cleaned = 0.000171073 Jy ! Total flux subtracted in 200 components = 0.000171073 Jy ! Clean residual min=-0.004968 max=0.003551 Jy/beam ! Clean residual mean=-0.000055 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0883662 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15752e-06 Jy ! Component: 100 - total flux cleaned = 2.12125e-05 Jy ! Component: 150 - total flux cleaned = 2.25796e-05 Jy ! Component: 200 - total flux cleaned = 2.28659e-05 Jy ! Total flux subtracted in 200 components = 2.28659e-05 Jy ! Clean residual min=-0.004969 max=0.003532 Jy/beam ! Clean residual mean=-0.000054 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.088389 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.088389 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=7.217 mas, bpa=-6.454 degrees ! Estimated noise=1.99975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208481 Jy ! Component: 100 - total flux cleaned = -0.000120474 Jy ! Component: 150 - total flux cleaned = -0.00010305 Jy ! Component: 200 - total flux cleaned = -8.63021e-05 Jy ! Total flux subtracted in 200 components = -8.63021e-05 Jy ! Clean residual min=-0.004147 max=0.002989 Jy/beam ! Clean residual mean=-0.000022 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.0883027 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0883027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104297Jy sigma=0.442212 ! Fit after self-cal, rms=0.104298Jy sigma=0.442201 wmodel J0232-2839_S_map.mod ! Writing 47 model components to file: J0232-2839_S_map.mod wobs J0232-2839_S_uvs.fits ! Writing UV FITS file: J0232-2839_S_uvs.fits wwins J0232-2839_S_map.win ! wwins: Wrote 1 windows to J0232-2839_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016655 Jy ! Component: 100 - total flux cleaned = -0.00231835 Jy ! Component: 150 - total flux cleaned = -0.00236705 Jy ! Component: 200 - total flux cleaned = -0.00236605 Jy ! Component: 250 - total flux cleaned = -0.00245742 Jy ! Component: 300 - total flux cleaned = -0.00241254 Jy ! Component: 350 - total flux cleaned = -0.00245552 Jy ! Component: 400 - total flux cleaned = -0.00261923 Jy ! Component: 450 - total flux cleaned = -0.00277849 Jy ! Component: 500 - total flux cleaned = -0.00301192 Jy ! Component: 550 - total flux cleaned = -0.00316387 Jy ! Component: 600 - total flux cleaned = -0.00338562 Jy ! Component: 650 - total flux cleaned = -0.00356526 Jy ! Component: 700 - total flux cleaned = -0.00367004 Jy ! Component: 750 - total flux cleaned = -0.00387549 Jy ! Component: 800 - total flux cleaned = -0.00397533 Jy ! Component: 850 - total flux cleaned = -0.00413858 Jy ! Component: 900 - total flux cleaned = -0.00426668 Jy ! Component: 950 - total flux cleaned = -0.00442303 Jy ! Component: 1000 - total flux cleaned = -0.00457579 Jy ! Component: 1050 - total flux cleaned = -0.00460604 Jy ! Component: 1100 - total flux cleaned = -0.00475403 Jy ! Component: 1150 - total flux cleaned = -0.00487046 Jy ! Component: 1200 - total flux cleaned = -0.00495637 Jy ! Component: 1250 - total flux cleaned = -0.00506883 Jy ! Component: 1300 - total flux cleaned = -0.0051246 Jy ! Component: 1350 - total flux cleaned = -0.0053416 Jy ! Component: 1400 - total flux cleaned = -0.00534121 Jy ! Component: 1450 - total flux cleaned = -0.00547215 Jy ! Component: 1500 - total flux cleaned = -0.0054976 Jy ! Component: 1550 - total flux cleaned = -0.00557344 Jy ! Component: 1600 - total flux cleaned = -0.00557363 Jy ! Component: 1650 - total flux cleaned = -0.0055984 Jy ! Component: 1700 - total flux cleaned = -0.00559888 Jy ! Component: 1750 - total flux cleaned = -0.00567119 Jy ! Component: 1800 - total flux cleaned = -0.00567132 Jy ! Component: 1850 - total flux cleaned = -0.00562515 Jy ! Component: 1900 - total flux cleaned = -0.00557908 Jy ! Component: 1950 - total flux cleaned = -0.00551085 Jy ! Component: 2000 - total flux cleaned = -0.00553337 Jy ! Component: 2050 - total flux cleaned = -0.00542179 Jy ! Component: 2100 - total flux cleaned = -0.0053552 Jy ! Component: 2150 - total flux cleaned = -0.00531165 Jy ! Component: 2200 - total flux cleaned = -0.00526822 Jy ! Component: 2250 - total flux cleaned = -0.00520363 Jy ! Component: 2300 - total flux cleaned = -0.00516122 Jy ! Component: 2350 - total flux cleaned = -0.00516101 Jy ! Component: 2400 - total flux cleaned = -0.00511903 Jy ! Component: 2450 - total flux cleaned = -0.00509819 Jy ! Component: 2500 - total flux cleaned = -0.00511896 Jy ! Component: 2550 - total flux cleaned = -0.00513933 Jy ! Component: 2600 - total flux cleaned = -0.00511898 Jy ! Component: 2650 - total flux cleaned = -0.00509867 Jy ! Component: 2700 - total flux cleaned = -0.00511869 Jy ! Component: 2750 - total flux cleaned = -0.00505879 Jy ! Component: 2800 - total flux cleaned = -0.00501923 Jy ! Component: 2850 - total flux cleaned = -0.00503902 Jy ! Component: 2900 - total flux cleaned = -0.00499978 Jy ! Component: 2950 - total flux cleaned = -0.00501935 Jy ! Component: 3000 - total flux cleaned = -0.00501921 Jy ! Component: 3050 - total flux cleaned = -0.00496112 Jy ! Component: 3100 - total flux cleaned = -0.00490341 Jy ! Component: 3150 - total flux cleaned = -0.00488415 Jy ! Component: 3200 - total flux cleaned = -0.00484599 Jy ! Component: 3250 - total flux cleaned = -0.00480804 Jy ! Component: 3300 - total flux cleaned = -0.00478904 Jy ! Component: 3350 - total flux cleaned = -0.00477015 Jy ! Component: 3400 - total flux cleaned = -0.00465747 Jy ! Component: 3450 - total flux cleaned = -0.00460132 Jy ! Component: 3500 - total flux cleaned = -0.00445169 Jy ! Component: 3550 - total flux cleaned = -0.00435834 Jy ! Component: 3600 - total flux cleaned = -0.00424643 Jy ! Component: 3650 - total flux cleaned = -0.00422781 Jy ! Component: 3700 - total flux cleaned = -0.00415343 Jy ! Component: 3750 - total flux cleaned = -0.00404205 Jy ! Component: 3800 - total flux cleaned = -0.0039679 Jy ! Component: 3850 - total flux cleaned = -0.00387531 Jy ! Component: 3900 - total flux cleaned = -0.00380132 Jy ! Component: 3950 - total flux cleaned = -0.00369036 Jy ! Component: 4000 - total flux cleaned = -0.00365344 Jy ! Component: 4050 - total flux cleaned = -0.00350587 Jy ! Total flux subtracted in 4096 components = -0.00345059 Jy ! Clean residual min=-0.001016 max=0.001232 Jy/beam ! Clean residual mean=0.000009 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0848522 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 294 components and 0.0848521 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0232-2839_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.701 x 7.217 at -6.454 degrees (North through East) ! Clean map min=-0.0037773 max=0.081957 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0232-2839_S_map.fits wmodel /image_prod/ug002_uva//J0232-2839_S_map.mod ! Writing 294 model components to file: /image_prod/ug002_uva//J0232-2839_S_map.mod wobs /image_prod/ug002_uva//J0232-2839_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0232-2839_S_uvs.fits wwins /image_prod/ug002_uva//J0232-2839_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0232-2839_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0819566 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303839 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1122 1.1122 2.22439 4.44878 8.89757 17.7951 35.5903 71.1805 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.081 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 269.736 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0232-2839_S_dfm.log closed on Wed Mar 4 19:36:08 2020