! Started logfile: /image_prod/ug002_uva//J0232+2317_X_dfm.log on Wed Mar  4 19:35:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0232+2317_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0232+2317_X_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.912296 visibilities/baseline/integration-bin.
! Found source: J0232+2317
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 36948 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0232+2317_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018493Jy  sigma=9.521807
! Fit after  self-cal, rms=0.844668Jy  sigma=7.823494
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7021 mas, bmaj=1.584 mas, bpa=-1.577 degrees
! Estimated noise=0.818579 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111722 Jy
! Component: 100  -  total flux cleaned = 0.153319 Jy
! Total flux subtracted in 100 components = 0.153319 Jy
! Clean residual min=-0.007721 max=0.019819 Jy/beam
! Clean residual mean=0.000003 rms=0.001955 Jy/beam
! Combined flux in latest and established models = 0.153319 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.153319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076169Jy  sigma=0.674050
! Fit after  self-cal, rms=0.075754Jy  sigma=0.670841
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0239611 Jy
! Component: 100  -  total flux cleaned = 0.0375898 Jy
! Total flux subtracted in 100 components = 0.0375898 Jy
! Clean residual min=-0.005727 max=0.015053 Jy/beam
! Clean residual mean=0.000002 rms=0.001353 Jy/beam
! Combined flux in latest and established models = 0.190909 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.190909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064286Jy  sigma=0.554867
! Fit after  self-cal, rms=0.064197Jy  sigma=0.554270
! Inverting map 
! Added new window around map position (-2.6, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013593 Jy
! Component: 100  -  total flux cleaned = 0.0218549 Jy
! Total flux subtracted in 100 components = 0.0218549 Jy
! Clean residual min=-0.004538 max=0.007452 Jy/beam
! Clean residual mean=0.000001 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.212764 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.212764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060123Jy  sigma=0.509892
! Fit after  self-cal, rms=0.059946Jy  sigma=0.508177
! Inverting map 
! Added new window around map position (-1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793274 Jy
! Component: 100  -  total flux cleaned = 0.0134215 Jy
! Total flux subtracted in 100 components = 0.0134215 Jy
! Clean residual min=-0.004379 max=0.006290 Jy/beam
! Clean residual mean=0.000000 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.226185 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.226185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058262Jy  sigma=0.491602
! Fit after  self-cal, rms=0.058189Jy  sigma=0.490969
! Inverting map 
! Added new window around map position (2, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565843 Jy
! Component: 100  -  total flux cleaned = 0.00870587 Jy
! Total flux subtracted in 100 components = 0.00870587 Jy
! Clean residual min=-0.004116 max=0.004549 Jy/beam
! Clean residual mean=-0.000000 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.234891 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.234891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057471Jy  sigma=0.483658
! Fit after  self-cal, rms=0.057447Jy  sigma=0.483514
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8891 mas, bmaj=1.891 mas, bpa=-1.448 degrees
! Estimated noise=0.403693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485613 Jy
! Component: 100  -  total flux cleaned = 0.00805646 Jy
! Component: 150  -  total flux cleaned = 0.00957 Jy
! Component: 200  -  total flux cleaned = 0.0107805 Jy
! Total flux subtracted in 200 components = 0.0107805 Jy
! Clean residual min=-0.004566 max=0.004015 Jy/beam
! Clean residual mean=-0.000002 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.245672 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 40 components and 0.245672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056886Jy  sigma=0.478620
! Fit after  self-cal, rms=0.056858Jy  sigma=0.478420
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8891 x 1.891 at -1.448 degrees (North through East)
! Clean map  min=-0.0044264  max=0.15558 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.91     KP        1.08     
!   LA        1.06     MK        1.23     NL        1.04     OV        0.93     
!   PT        0.89     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.92     KP        1.07     
!   LA        1.06     MK        1.25     NL        1.05     OV        0.91     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.92     KP        1.07     
!   LA        1.06     MK        1.23     NL        1.03     OV        0.92     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.92     KP        1.05     
!   LA        1.05     MK        1.29     NL        1.03     OV        0.93     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.90     KP        1.07     
!   LA        1.06     MK        1.22     NL        1.03     OV        0.92     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.89     KP        1.06     
!   LA        1.07     MK        1.24     NL        1.04     OV        0.93     
!   PT        0.90     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.93     KP        1.08     
!   LA        1.07     MK        1.24     NL        1.03     OV        0.92     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.92     KP        1.06     
!   LA        1.05     MK        1.20     NL        1.02     OV        0.94     
!   PT        0.89     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.91     KP        1.06     
!   LA        1.05     MK        1.25     NL        1.03     OV        0.94     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.92     KP        1.08     
!   LA        1.06     MK        1.18     NL        1.03     OV        0.92     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.92     KP        1.08     
!   LA        1.05     MK        1.32     NL        1.03     OV        0.93     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.93     KP        1.08     
!   LA        1.06     MK        1.20     NL        1.06     OV        0.93     
!   PT        0.90     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.056858Jy  sigma=0.478420
! Fit after  self-cal, rms=0.056641Jy  sigma=0.455455
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9154 mas, bmaj=1.902 mas, bpa=0.2658 degrees
! Estimated noise=0.407109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439279 Jy
! Component: 100  -  total flux cleaned = 0.000254518 Jy
! Component: 150  -  total flux cleaned = 0.000323418 Jy
! Component: 200  -  total flux cleaned = 0.000513306 Jy
! Total flux subtracted in 200 components = 0.000513306 Jy
! Clean residual min=-0.002074 max=0.001749 Jy/beam
! Clean residual mean=-0.000002 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.246185 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.246185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056326Jy  sigma=0.453541
! Fit after  self-cal, rms=0.056322Jy  sigma=0.453324
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056322Jy  sigma=0.453324
! Fit after  self-cal, rms=0.057690Jy  sigma=0.448261
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9071 mas, bmaj=1.895 mas, bpa=-0.768 degrees
! Estimated noise=0.404084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184695 Jy
! Component: 100  -  total flux cleaned = 0.000345705 Jy
! Component: 150  -  total flux cleaned = 0.000450765 Jy
! Component: 200  -  total flux cleaned = 0.000450908 Jy
! Total flux subtracted in 200 components = 0.000450908 Jy
! Clean residual min=-0.001413 max=0.001024 Jy/beam
! Clean residual mean=0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.246636 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.246636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057617Jy  sigma=0.447655
! Fit after  self-cal, rms=0.057633Jy  sigma=0.447587
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188736 Jy
! Component: 100  -  total flux cleaned = 0.000302519 Jy
! Component: 150  -  total flux cleaned = 0.000354435 Jy
! Component: 200  -  total flux cleaned = 0.000404235 Jy
! Total flux subtracted in 200 components = 0.000404235 Jy
! Clean residual min=-0.001326 max=0.000990 Jy/beam
! Clean residual mean=0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.24704 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.24704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057598Jy  sigma=0.447394
! Fit after  self-cal, rms=0.057596Jy  sigma=0.447378
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057596Jy  sigma=0.447378
! Fit after  self-cal, rms=0.057825Jy  sigma=0.447193
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9067 mas, bmaj=1.896 mas, bpa=-0.7561 degrees
! Estimated noise=0.403651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000777603 Jy
! Component: 100  -  total flux cleaned = -0.000781107 Jy
! Component: 150  -  total flux cleaned = -0.000732263 Jy
! Component: 200  -  total flux cleaned = -0.000709626 Jy
! Total flux subtracted in 200 components = -0.000709626 Jy
! Clean residual min=-0.001144 max=0.000967 Jy/beam
! Clean residual mean=0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.24633 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 84 components and 0.24633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057789Jy  sigma=0.446971
! Fit after  self-cal, rms=0.057791Jy  sigma=0.446962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114438 Jy
! Component: 100  -  total flux cleaned = 0.000156931 Jy
! Component: 150  -  total flux cleaned = 0.000197019 Jy
! Component: 200  -  total flux cleaned = 0.000216944 Jy
! Total flux subtracted in 200 components = 0.000216944 Jy
! Clean residual min=-0.001108 max=0.000931 Jy/beam
! Clean residual mean=0.000000 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.246547 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.246547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057769Jy  sigma=0.446867
! Fit after  self-cal, rms=0.057768Jy  sigma=0.446862
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057768Jy  sigma=0.446862
! Fit after  self-cal, rms=0.057858Jy  sigma=0.446800
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.045 mas, bmaj=2.782 mas, bpa=-1.992 degrees
! Estimated noise=0.49468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000372687 Jy
! Component: 100  -  total flux cleaned = -0.000473143 Jy
! Component: 150  -  total flux cleaned = -0.000560914 Jy
! Component: 200  -  total flux cleaned = -0.000600932 Jy
! Total flux subtracted in 200 components = -0.000600932 Jy
! Clean residual min=-0.001121 max=0.001200 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.245946 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 112 components and 0.245946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057854Jy  sigma=0.446716
! Fit after  self-cal, rms=0.057854Jy  sigma=0.446704
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.6, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010608 Jy
! Component: 100  -  total flux cleaned = 0.00168744 Jy
! Component: 150  -  total flux cleaned = 0.00214515 Jy
! Component: 200  -  total flux cleaned = 0.00249185 Jy
! Total flux subtracted in 200 components = 0.00249185 Jy
! Clean residual min=-0.000991 max=0.000818 Jy/beam
! Clean residual mean=0.000001 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.248438 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 139 components and 0.248438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057839Jy  sigma=0.446511
! Fit after  self-cal, rms=0.057838Jy  sigma=0.446505
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=1.897 mas, bpa=-0.6995 degrees
! Estimated noise=0.403509 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 1.897 at -0.6995 degrees (North through East)
! Clean map  min=-0.00088969  max=0.15601 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7171 mas, bmaj=1.591 mas, bpa=-0.8776 degrees
! Estimated noise=0.826301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112566 Jy
! Component: 100  -  total flux cleaned = 0.156185 Jy
! Component: 150  -  total flux cleaned = 0.17961 Jy
! Component: 200  -  total flux cleaned = 0.194629 Jy
! Total flux subtracted in 200 components = 0.194629 Jy
! Clean residual min=-0.003281 max=0.008129 Jy/beam
! Clean residual mean=0.000002 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.194629 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.194629 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=1.897 mas, bpa=-0.6995 degrees
! Estimated noise=0.403509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156759 Jy
! Component: 100  -  total flux cleaned = 0.0256224 Jy
! Component: 150  -  total flux cleaned = 0.032216 Jy
! Component: 200  -  total flux cleaned = 0.0367242 Jy
! Total flux subtracted in 200 components = 0.0367242 Jy
! Clean residual min=-0.001489 max=0.002574 Jy/beam
! Clean residual mean=0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.231353 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 35 components and 0.231353 Jy
! Inverting map 
! Added new window around map position (-1.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335333 Jy
! Component: 100  -  total flux cleaned = 0.00594675 Jy
! Component: 150  -  total flux cleaned = 0.00797994 Jy
! Component: 200  -  total flux cleaned = 0.00958846 Jy
! Total flux subtracted in 200 components = 0.00958846 Jy
! Clean residual min=-0.001168 max=0.001095 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.240941 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 58 components and 0.240941 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.045 mas, bmaj=2.782 mas, bpa=-1.992 degrees
! Estimated noise=0.49468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208811 Jy
! Component: 100  -  total flux cleaned = 0.00340633 Jy
! Component: 150  -  total flux cleaned = 0.0044021 Jy
! Component: 200  -  total flux cleaned = 0.00508116 Jy
! Total flux subtracted in 200 components = 0.00508116 Jy
! Clean residual min=-0.001110 max=0.000888 Jy/beam
! Clean residual mean=0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.246023 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000551261 Jy
! Component: 100  -  total flux cleaned = 0.00103361 Jy
! Component: 150  -  total flux cleaned = 0.00145967 Jy
! Component: 200  -  total flux cleaned = 0.00184042 Jy
! Total flux subtracted in 200 components = 0.00184042 Jy
! Clean residual min=-0.001001 max=0.000850 Jy/beam
! Clean residual mean=0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.247863 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 131 components and 0.247863 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=1.897 mas, bpa=-0.6995 degrees
! Estimated noise=0.403509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252025 Jy
! Component: 100  -  total flux cleaned = 0.000530174 Jy
! Component: 150  -  total flux cleaned = 0.000725956 Jy
! Component: 200  -  total flux cleaned = 0.000839992 Jy
! Total flux subtracted in 200 components = 0.000839992 Jy
! Clean residual min=-0.000926 max=0.000745 Jy/beam
! Clean residual mean=0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.248703 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 161 components and 0.248703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057741Jy  sigma=0.446297
! Fit after  self-cal, rms=0.057718Jy  sigma=0.446219
wmodel J0232+2317_X_map.mod
! Writing 161 model components to file: J0232+2317_X_map.mod
wobs   J0232+2317_X_uvs.fits
! Writing UV FITS file: J0232+2317_X_uvs.fits
wwins  J0232+2317_X_map.win
! wwins: Wrote 7 windows to J0232+2317_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000399505 Jy
! Component: 100  -  total flux cleaned = -0.000543648 Jy
! Component: 150  -  total flux cleaned = -0.000557757 Jy
! Component: 200  -  total flux cleaned = -0.000544751 Jy
! Component: 250  -  total flux cleaned = -0.000557874 Jy
! Component: 300  -  total flux cleaned = -0.000545415 Jy
! Component: 350  -  total flux cleaned = -0.000582544 Jy
! Component: 400  -  total flux cleaned = -0.000630762 Jy
! Component: 450  -  total flux cleaned = -0.000642248 Jy
! Component: 500  -  total flux cleaned = -0.00065382 Jy
! Component: 550  -  total flux cleaned = -0.000665252 Jy
! Component: 600  -  total flux cleaned = -0.000642693 Jy
! Component: 650  -  total flux cleaned = -0.000609421 Jy
! Component: 700  -  total flux cleaned = -0.000554675 Jy
! Component: 750  -  total flux cleaned = -0.000522221 Jy
! Component: 800  -  total flux cleaned = -0.000437133 Jy
! Component: 850  -  total flux cleaned = -0.000426691 Jy
! Component: 900  -  total flux cleaned = -0.000374846 Jy
! Component: 950  -  total flux cleaned = -0.000374886 Jy
! Component: 1000  -  total flux cleaned = -0.000354619 Jy
! Component: 1050  -  total flux cleaned = -0.000344543 Jy
! Component: 1100  -  total flux cleaned = -0.000324723 Jy
! Component: 1150  -  total flux cleaned = -0.000266147 Jy
! Component: 1200  -  total flux cleaned = -0.000246922 Jy
! Component: 1250  -  total flux cleaned = -0.000237321 Jy
! Component: 1300  -  total flux cleaned = -0.000199277 Jy
! Component: 1350  -  total flux cleaned = -0.000152357 Jy
! Component: 1400  -  total flux cleaned = -0.000133714 Jy
! Component: 1450  -  total flux cleaned = -0.000115142 Jy
! Component: 1500  -  total flux cleaned = -0.000105874 Jy
! Component: 1550  -  total flux cleaned = -4.22549e-05 Jy
! Component: 1600  -  total flux cleaned = -4.22921e-05 Jy
! Component: 1650  -  total flux cleaned = -6.43696e-06 Jy
! Component: 1700  -  total flux cleaned = 1.13116e-05 Jy
! Component: 1750  -  total flux cleaned = 2.88669e-05 Jy
! Component: 1800  -  total flux cleaned = 2.87627e-05 Jy
! Component: 1850  -  total flux cleaned = 7.21356e-05 Jy
! Component: 1900  -  total flux cleaned = 7.21702e-05 Jy
! Component: 1950  -  total flux cleaned = 5.50976e-05 Jy
! Component: 2000  -  total flux cleaned = 7.20752e-05 Jy
! Component: 2050  -  total flux cleaned = 7.19874e-05 Jy
! Component: 2100  -  total flux cleaned = 8.87115e-05 Jy
! Component: 2150  -  total flux cleaned = 6.38005e-05 Jy
! Component: 2200  -  total flux cleaned = 4.735e-05 Jy
! Component: 2250  -  total flux cleaned = 7.18961e-05 Jy
! Component: 2300  -  total flux cleaned = 5.55999e-05 Jy
! Component: 2350  -  total flux cleaned = 7.17889e-05 Jy
! Component: 2400  -  total flux cleaned = 8.78894e-05 Jy
! Component: 2450  -  total flux cleaned = 7.98773e-05 Jy
! Component: 2500  -  total flux cleaned = 9.57604e-05 Jy
! Component: 2550  -  total flux cleaned = 7.99184e-05 Jy
! Component: 2600  -  total flux cleaned = 4.08788e-05 Jy
! Component: 2650  -  total flux cleaned = 7.99744e-05 Jy
! Component: 2700  -  total flux cleaned = 8.77025e-05 Jy
! Component: 2750  -  total flux cleaned = 7.99911e-05 Jy
! Component: 2800  -  total flux cleaned = 8.75979e-05 Jy
! Component: 2850  -  total flux cleaned = 6.47247e-05 Jy
! Component: 2900  -  total flux cleaned = 7.97954e-05 Jy
! Component: 2950  -  total flux cleaned = 4.97075e-05 Jy
! Component: 3000  -  total flux cleaned = 6.46731e-05 Jy
! Component: 3050  -  total flux cleaned = 4.98051e-05 Jy
! Component: 3100  -  total flux cleaned = 4.23703e-05 Jy
! Component: 3150  -  total flux cleaned = 5.7072e-05 Jy
! Component: 3200  -  total flux cleaned = 4.24407e-05 Jy
! Component: 3250  -  total flux cleaned = 5.69668e-05 Jy
! Component: 3300  -  total flux cleaned = 7.14289e-05 Jy
! Component: 3350  -  total flux cleaned = 7.86179e-05 Jy
! Component: 3400  -  total flux cleaned = 0.000100116 Jy
! Component: 3450  -  total flux cleaned = 9.29925e-05 Jy
! Component: 3500  -  total flux cleaned = 0.000114272 Jy
! Component: 3550  -  total flux cleaned = 0.000135453 Jy
! Component: 3600  -  total flux cleaned = 0.000135442 Jy
! Component: 3650  -  total flux cleaned = 0.000149522 Jy
! Component: 3700  -  total flux cleaned = 0.000149486 Jy
! Component: 3750  -  total flux cleaned = 0.000170226 Jy
! Component: 3800  -  total flux cleaned = 0.000225426 Jy
! Component: 3850  -  total flux cleaned = 0.000218536 Jy
! Component: 3900  -  total flux cleaned = 0.000211715 Jy
! Component: 3950  -  total flux cleaned = 0.000259366 Jy
! Component: 4000  -  total flux cleaned = 0.00024583 Jy
! Component: 4050  -  total flux cleaned = 0.000245803 Jy
! Total flux subtracted in 4096 components = 0.000232372 Jy
! Clean residual min=-0.000457 max=0.000428 Jy/beam
! Clean residual mean=-0.000000 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.248935 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 464 components and 0.248935 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0232+2317_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 1.897 at -0.6995 degrees (North through East)
! Clean map  min=-0.00073084  max=0.15653 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0232+2317_X_map.fits
wmodel /image_prod/ug002_uva//J0232+2317_X_map.mod
! Writing 464 model components to file: /image_prod/ug002_uva//J0232+2317_X_map.mod
wobs   /image_prod/ug002_uva//J0232+2317_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0232+2317_X_uvs.fits
wwins  /image_prod/ug002_uva//J0232+2317_X_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0232+2317_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.15653 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0001157 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.221745 0.221745 0.443491 0.886982 1.77396 3.54793 7.09586 14.1917 28.3834 56.7668
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.156 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1352.9 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0232+2317_X_dfm.log closed on Wed Mar  4 19:35:52 2020