! Started logfile: /image_prod/ug002_uva//J0232+0726_X_dfm.log on Wed Mar  4 19:35:25 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0232+0726_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0232+0726_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.996759 visibilities/baseline/integration-bin.
! Found source: J0232+0726
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25836 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0232+0726_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004544Jy  sigma=9.986956
! Fit after  self-cal, rms=0.944676Jy  sigma=9.379064
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=2.197 mas, bpa=19.72 degrees
! Estimated noise=0.857385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435981 Jy
! Component: 100  -  total flux cleaned = 0.0538198 Jy
! Total flux subtracted in 100 components = 0.0538198 Jy
! Clean residual min=-0.005414 max=0.014317 Jy/beam
! Clean residual mean=0.000014 rms=0.001757 Jy/beam
! Combined flux in latest and established models = 0.0538198 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0538198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060478Jy  sigma=0.571555
! Fit after  self-cal, rms=0.059294Jy  sigma=0.559900
! Inverting map 
! Added new window around map position (7.6, -13.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014636 Jy
! Component: 100  -  total flux cleaned = 0.0227195 Jy
! Total flux subtracted in 100 components = 0.0227195 Jy
! Clean residual min=-0.004128 max=0.006098 Jy/beam
! Clean residual mean=0.000011 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.0765393 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.0765393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054911Jy  sigma=0.509300
! Fit after  self-cal, rms=0.054186Jy  sigma=0.502380
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00790787 Jy
! Component: 100  -  total flux cleaned = 0.0130628 Jy
! Total flux subtracted in 100 components = 0.0130628 Jy
! Clean residual min=-0.003230 max=0.003262 Jy/beam
! Clean residual mean=0.000008 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.0896021 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.0896021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052620Jy  sigma=0.483788
! Fit after  self-cal, rms=0.052480Jy  sigma=0.482395
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.335 mas, bpa=15.96 degrees
! Estimated noise=0.511908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00677594 Jy
! Component: 100  -  total flux cleaned = 0.0112501 Jy
! Component: 150  -  total flux cleaned = 0.0146969 Jy
! Component: 200  -  total flux cleaned = 0.0174992 Jy
! Total flux subtracted in 200 components = 0.0174992 Jy
! Clean residual min=-0.002570 max=0.002853 Jy/beam
! Clean residual mean=0.000005 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.107101 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 69 components and 0.107101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051440Jy  sigma=0.469744
! Fit after  self-cal, rms=0.051358Jy  sigma=0.468748
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 2.335 at 15.96 degrees (North through East)
! Clean map  min=-0.0023836  max=0.057579 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.06     KP        0.91     
!   LA        1.00*    NL        0.99     OV        0.98     PT        0.91     
!   SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.03     KP        0.89     
!   LA        1.00*    NL        1.01     OV        1.04     PT        0.91     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.09     KP        0.91     
!   LA        1.00*    NL        1.03     OV        0.98     PT        0.88     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        1.04     KP        0.88     
!   LA        1.00*    NL        1.02     OV        1.00     PT        0.91     
!   SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.08     KP        0.97     
!   LA        1.00*    NL        1.04     OV        0.99     PT        0.87     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.00     HN        1.03     KP        0.90     
!   LA        1.00*    NL        0.99     OV        1.01     PT        0.91     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.02     KP        0.90     
!   LA        1.00*    NL        1.03     OV        0.99     PT        0.95     
!   SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.02     KP        0.90     
!   LA        1.00*    NL        1.03     OV        0.98     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.03     KP        0.91     
!   LA        1.00*    NL        0.97     OV        1.04     PT        0.90     
!   SC        1.11     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        1.09     KP        0.88     
!   LA        1.00*    NL        0.94     OV        1.00     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.10     KP        0.93     
!   LA        1.00*    NL        0.95     OV        1.01     PT        0.91     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.08     KP        0.95     
!   LA        1.00*    NL        0.95     OV        1.03     PT        0.89     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.051358Jy  sigma=0.468748
! Fit after  self-cal, rms=0.050370Jy  sigma=0.464432
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=2.362 mas, bpa=15.64 degrees
! Estimated noise=0.499909 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.4, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178969 Jy
! Component: 100  -  total flux cleaned = 0.00210031 Jy
! Component: 150  -  total flux cleaned = 0.00248866 Jy
! Component: 200  -  total flux cleaned = 0.00274817 Jy
! Total flux subtracted in 200 components = 0.00274817 Jy
! Clean residual min=-0.001487 max=0.001817 Jy/beam
! Clean residual mean=0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.109849 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 99 components and 0.109849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050261Jy  sigma=0.463143
! Fit after  self-cal, rms=0.050303Jy  sigma=0.462894
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050303Jy  sigma=0.462894
! Fit after  self-cal, rms=0.049851Jy  sigma=0.461994
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.364 mas, bpa=15.54 degrees
! Estimated noise=0.498952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000739332 Jy
! Component: 100  -  total flux cleaned = 0.0010523 Jy
! Component: 150  -  total flux cleaned = 0.00128609 Jy
! Component: 200  -  total flux cleaned = 0.00149063 Jy
! Total flux subtracted in 200 components = 0.00149063 Jy
! Clean residual min=-0.001382 max=0.001677 Jy/beam
! Clean residual mean=0.000000 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.11134 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 122 components and 0.11134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049811Jy  sigma=0.461514
! Fit after  self-cal, rms=0.049809Jy  sigma=0.461429
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19.2, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013864 Jy
! Component: 100  -  total flux cleaned = 0.00189943 Jy
! Component: 150  -  total flux cleaned = 0.00199627 Jy
! Component: 200  -  total flux cleaned = 0.00214965 Jy
! Total flux subtracted in 200 components = 0.00214965 Jy
! Clean residual min=-0.001266 max=0.001256 Jy/beam
! Clean residual mean=0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.11349 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 150 components and 0.11349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049763Jy  sigma=0.460950
! Fit after  self-cal, rms=0.049752Jy  sigma=0.460910
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049752Jy  sigma=0.460910
! Fit after  self-cal, rms=0.049892Jy  sigma=0.460884
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.365 mas, bpa=15.46 degrees
! Estimated noise=0.499142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000658042 Jy
! Component: 100  -  total flux cleaned = 0.000944215 Jy
! Component: 150  -  total flux cleaned = 0.0010826 Jy
! Component: 200  -  total flux cleaned = 0.00119229 Jy
! Total flux subtracted in 200 components = 0.00119229 Jy
! Clean residual min=-0.001228 max=0.001206 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.114682 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 166 components and 0.114682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049875Jy  sigma=0.460703
! Fit after  self-cal, rms=0.049877Jy  sigma=0.460687
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157216 Jy
! Component: 100  -  total flux cleaned = 0.00022727 Jy
! Component: 150  -  total flux cleaned = 0.00029357 Jy
! Component: 200  -  total flux cleaned = 0.000325203 Jy
! Total flux subtracted in 200 components = 0.000325203 Jy
! Clean residual min=-0.001194 max=0.001173 Jy/beam
! Clean residual mean=0.000000 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.115007 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 177 components and 0.115007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049866Jy  sigma=0.460577
! Fit after  self-cal, rms=0.049864Jy  sigma=0.460571
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049864Jy  sigma=0.460571
! Fit after  self-cal, rms=0.049847Jy  sigma=0.460563
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.053 mas, bmaj=2.903 mas, bpa=-0.2634 degrees
! Estimated noise=0.582372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000677563 Jy
! Component: 100  -  total flux cleaned = 0.000857679 Jy
! Component: 150  -  total flux cleaned = 0.000994802 Jy
! Component: 200  -  total flux cleaned = 0.00107049 Jy
! Total flux subtracted in 200 components = 0.00107049 Jy
! Clean residual min=-0.001013 max=0.001364 Jy/beam
! Clean residual mean=0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.116078 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 211 components and 0.116078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049841Jy  sigma=0.460471
! Fit after  self-cal, rms=0.049840Jy  sigma=0.460456
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.33674e-05 Jy
! Component: 100  -  total flux cleaned = 4.95329e-05 Jy
! Component: 150  -  total flux cleaned = 4.92861e-05 Jy
! Component: 200  -  total flux cleaned = 2.51949e-05 Jy
! Total flux subtracted in 200 components = 2.51949e-05 Jy
! Clean residual min=-0.001006 max=0.001322 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.116103 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 232 components and 0.116103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049836Jy  sigma=0.460411
! Fit after  self-cal, rms=0.049835Jy  sigma=0.460407
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.364 mas, bpa=15.45 degrees
! Estimated noise=0.49877 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.364 at 15.45 degrees (North through East)
! Clean map  min=-0.0011535  max=0.055975 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9042 mas, bmaj=2.217 mas, bpa=19.24 degrees
! Estimated noise=0.845217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0441142 Jy
! Component: 100  -  total flux cleaned = 0.0628399 Jy
! Component: 150  -  total flux cleaned = 0.0743119 Jy
! Component: 200  -  total flux cleaned = 0.082142 Jy
! Total flux subtracted in 200 components = 0.082142 Jy
! Clean residual min=-0.003138 max=0.004484 Jy/beam
! Clean residual mean=0.000006 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.082142 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.082142 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.364 mas, bpa=15.45 degrees
! Estimated noise=0.49877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00742345 Jy
! Component: 100  -  total flux cleaned = 0.0126719 Jy
! Component: 150  -  total flux cleaned = 0.0165922 Jy
! Component: 200  -  total flux cleaned = 0.0195703 Jy
! Total flux subtracted in 200 components = 0.0195703 Jy
! Clean residual min=-0.002084 max=0.001947 Jy/beam
! Clean residual mean=0.000002 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.101712 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 57 components and 0.101712 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.053 mas, bmaj=2.903 mas, bpa=-0.2634 degrees
! Estimated noise=0.582372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00373077 Jy
! Component: 100  -  total flux cleaned = 0.00633063 Jy
! Component: 150  -  total flux cleaned = 0.00832376 Jy
! Component: 200  -  total flux cleaned = 0.00989907 Jy
! Total flux subtracted in 200 components = 0.00989907 Jy
! Clean residual min=-0.001566 max=0.001632 Jy/beam
! Clean residual mean=0.000002 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.111611 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125777 Jy
! Component: 100  -  total flux cleaned = 0.00227338 Jy
! Component: 150  -  total flux cleaned = 0.00309987 Jy
! Component: 200  -  total flux cleaned = 0.00354612 Jy
! Total flux subtracted in 200 components = 0.00354612 Jy
! Clean residual min=-0.001207 max=0.001315 Jy/beam
! Clean residual mean=0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.115158 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 126 components and 0.115157 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.364 mas, bpa=15.45 degrees
! Estimated noise=0.49877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529838 Jy
! Component: 100  -  total flux cleaned = 0.000708602 Jy
! Component: 150  -  total flux cleaned = 0.000762567 Jy
! Component: 200  -  total flux cleaned = 0.000864073 Jy
! Total flux subtracted in 200 components = 0.000864073 Jy
! Clean residual min=-0.001146 max=0.001143 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.116022 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 149 components and 0.116022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049866Jy  sigma=0.460754
! Fit after  self-cal, rms=0.049861Jy  sigma=0.460664
wmodel J0232+0726_X_map.mod
! Writing 149 model components to file: J0232+0726_X_map.mod
wobs   J0232+0726_X_uvs.fits
! Writing UV FITS file: J0232+0726_X_uvs.fits
wwins  J0232+0726_X_map.win
! wwins: Wrote 4 windows to J0232+0726_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227606 Jy
! Component: 100  -  total flux cleaned = 0.000434478 Jy
! Component: 150  -  total flux cleaned = 0.000539495 Jy
! Component: 200  -  total flux cleaned = 0.000604914 Jy
! Component: 250  -  total flux cleaned = 0.000683942 Jy
! Component: 300  -  total flux cleaned = 0.000639025 Jy
! Component: 350  -  total flux cleaned = 0.000551844 Jy
! Component: 400  -  total flux cleaned = 0.000509452 Jy
! Component: 450  -  total flux cleaned = 0.000441107 Jy
! Component: 500  -  total flux cleaned = 0.000388855 Jy
! Component: 550  -  total flux cleaned = 0.000350849 Jy
! Component: 600  -  total flux cleaned = 0.000326195 Jy
! Component: 650  -  total flux cleaned = 0.000277511 Jy
! Component: 700  -  total flux cleaned = 0.00020638 Jy
! Component: 750  -  total flux cleaned = 0.000160278 Jy
! Component: 800  -  total flux cleaned = 9.25754e-05 Jy
! Component: 850  -  total flux cleaned = 7.0425e-05 Jy
! Component: 900  -  total flux cleaned = 2.72919e-05 Jy
! Component: 950  -  total flux cleaned = 2.70725e-05 Jy
! Component: 1000  -  total flux cleaned = -4.05511e-06 Jy
! Component: 1050  -  total flux cleaned = -4.05635e-06 Jy
! Component: 1100  -  total flux cleaned = -1.41995e-05 Jy
! Component: 1150  -  total flux cleaned = -2.40515e-05 Jy
! Component: 1200  -  total flux cleaned = -5.30764e-05 Jy
! Component: 1250  -  total flux cleaned = -7.20659e-05 Jy
! Component: 1300  -  total flux cleaned = -0.000109469 Jy
! Component: 1350  -  total flux cleaned = -0.000127756 Jy
! Component: 1400  -  total flux cleaned = -0.000119006 Jy
! Component: 1450  -  total flux cleaned = -0.000171914 Jy
! Component: 1500  -  total flux cleaned = -0.000171867 Jy
! Component: 1550  -  total flux cleaned = -0.000188823 Jy
! Component: 1600  -  total flux cleaned = -0.000188681 Jy
! Component: 1650  -  total flux cleaned = -0.000163805 Jy
! Component: 1700  -  total flux cleaned = -0.000163794 Jy
! Component: 1750  -  total flux cleaned = -0.000147517 Jy
! Component: 1800  -  total flux cleaned = -0.000115825 Jy
! Component: 1850  -  total flux cleaned = -9.23111e-05 Jy
! Component: 1900  -  total flux cleaned = -9.23036e-05 Jy
! Component: 1950  -  total flux cleaned = -6.15927e-05 Jy
! Component: 2000  -  total flux cleaned = -3.13414e-05 Jy
! Component: 2050  -  total flux cleaned = 5.92164e-06 Jy
! Component: 2100  -  total flux cleaned = -1.52696e-06 Jy
! Component: 2150  -  total flux cleaned = 2.77625e-05 Jy
! Component: 2200  -  total flux cleaned = 4.22467e-05 Jy
! Component: 2250  -  total flux cleaned = 4.2219e-05 Jy
! Component: 2300  -  total flux cleaned = 8.45762e-05 Jy
! Component: 2350  -  total flux cleaned = 8.44923e-05 Jy
! Component: 2400  -  total flux cleaned = 9.13812e-05 Jy
! Component: 2450  -  total flux cleaned = 0.000125585 Jy
! Component: 2500  -  total flux cleaned = 0.000118772 Jy
! Component: 2550  -  total flux cleaned = 0.000125601 Jy
! Component: 2600  -  total flux cleaned = 0.00014566 Jy
! Component: 2650  -  total flux cleaned = 0.000205027 Jy
! Component: 2700  -  total flux cleaned = 0.000237611 Jy
! Component: 2750  -  total flux cleaned = 0.000244048 Jy
! Component: 2800  -  total flux cleaned = 0.000276011 Jy
! Component: 2850  -  total flux cleaned = 0.000301393 Jy
! Component: 2900  -  total flux cleaned = 0.000320121 Jy
! Component: 2950  -  total flux cleaned = 0.000338873 Jy
! Component: 3000  -  total flux cleaned = 0.000357334 Jy
! Component: 3050  -  total flux cleaned = 0.000369554 Jy
! Component: 3100  -  total flux cleaned = 0.000387676 Jy
! Component: 3150  -  total flux cleaned = 0.000411587 Jy
! Component: 3200  -  total flux cleaned = 0.000417597 Jy
! Component: 3250  -  total flux cleaned = 0.000441085 Jy
! Component: 3300  -  total flux cleaned = 0.000441122 Jy
! Component: 3350  -  total flux cleaned = 0.000441097 Jy
! Component: 3400  -  total flux cleaned = 0.000452498 Jy
! Component: 3450  -  total flux cleaned = 0.000446794 Jy
! Component: 3500  -  total flux cleaned = 0.00044677 Jy
! Component: 3550  -  total flux cleaned = 0.000463637 Jy
! Component: 3600  -  total flux cleaned = 0.000452407 Jy
! Component: 3650  -  total flux cleaned = 0.000441273 Jy
! Component: 3700  -  total flux cleaned = 0.000446705 Jy
! Component: 3750  -  total flux cleaned = 0.000424846 Jy
! Component: 3800  -  total flux cleaned = 0.000430259 Jy
! Component: 3850  -  total flux cleaned = 0.000424843 Jy
! Component: 3900  -  total flux cleaned = 0.000424839 Jy
! Component: 3950  -  total flux cleaned = 0.000424805 Jy
! Component: 4000  -  total flux cleaned = 0.00040896 Jy
! Component: 4050  -  total flux cleaned = 0.00040902 Jy
! Total flux subtracted in 4096 components = 0.000414219 Jy
! Clean residual min=-0.000419 max=0.000292 Jy/beam
! Clean residual mean=-0.000000 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.116436 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 441 components and 0.116436 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0232+0726_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.364 at 15.45 degrees (North through East)
! Clean map  min=-0.00050249  max=0.055186 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0232+0726_X_map.fits
wmodel /image_prod/ug002_uva//J0232+0726_X_map.mod
! Writing 441 model components to file: /image_prod/ug002_uva//J0232+0726_X_map.mod
wobs   /image_prod/ug002_uva//J0232+0726_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0232+0726_X_uvs.fits
wwins  /image_prod/ug002_uva//J0232+0726_X_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0232+0726_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.055186 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.05451e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.492218 0.492218 0.984436 1.96887 3.93774 7.87549 15.751 31.5019 63.0039
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  609.486 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0232+0726_X_dfm.log closed on Wed Mar  4 19:35:30 2020