! Started logfile: /image_prod/ug002_uva//J0228+6721_X_dfm.log on Wed Mar 4 19:34:04 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0228+6721_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0228+6721_X_uva.fits ! AN table 1: 100 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.966667 visibilities/baseline/integration-bin. ! Found source: J0228+6721 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 41760 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0228+6721_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.485828Jy sigma=7.944374 ! Fit after self-cal, rms=0.186331Jy sigma=0.949050 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7272 mas, bmaj=0.8114 mas, bpa=-1.302 degrees ! Estimated noise=1.37298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.783597 Jy ! Component: 100 - total flux cleaned = 0.973862 Jy ! Total flux subtracted in 100 components = 0.973862 Jy ! Clean residual min=-0.026607 max=0.078254 Jy/beam ! Clean residual mean=-0.000022 rms=0.005186 Jy/beam ! Combined flux in latest and established models = 0.973862 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.973862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198038Jy sigma=0.994180 ! Fit after self-cal, rms=0.197949Jy sigma=0.993742 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869238 Jy ! Component: 100 - total flux cleaned = 0.133607 Jy ! Total flux subtracted in 100 components = 0.133607 Jy ! Clean residual min=-0.014900 max=0.026911 Jy/beam ! Clean residual mean=-0.000008 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 1.10747 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 1.10747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123106Jy sigma=0.613352 ! Fit after self-cal, rms=0.122876Jy sigma=0.612165 ! Inverting map ! Added new window around map position (0, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314902 Jy ! Component: 100 - total flux cleaned = 0.0526783 Jy ! Total flux subtracted in 100 components = 0.0526783 Jy ! Clean residual min=-0.014303 max=0.014200 Jy/beam ! Clean residual mean=-0.000002 rms=0.002607 Jy/beam ! Combined flux in latest and established models = 1.16015 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 1.16015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104379Jy sigma=0.525524 ! Fit after self-cal, rms=0.104173Jy sigma=0.524148 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9545 mas, bmaj=1.064 mas, bpa=5.682 degrees ! Estimated noise=0.662268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290391 Jy ! Component: 100 - total flux cleaned = 0.0453074 Jy ! Component: 150 - total flux cleaned = 0.0549509 Jy ! Component: 200 - total flux cleaned = 0.0608896 Jy ! Total flux subtracted in 200 components = 0.0608896 Jy ! Clean residual min=-0.015349 max=0.022260 Jy/beam ! Clean residual mean=0.000030 rms=0.003631 Jy/beam ! Combined flux in latest and established models = 1.22104 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 1.22104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093783Jy sigma=0.485285 ! Fit after self-cal, rms=0.093385Jy sigma=0.482680 ! Inverting map ! Added new window around map position (-0.2, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237262 Jy ! Component: 100 - total flux cleaned = 0.0380826 Jy ! Component: 150 - total flux cleaned = 0.0478873 Jy ! Component: 200 - total flux cleaned = 0.0551805 Jy ! Total flux subtracted in 200 components = 0.0551805 Jy ! Clean residual min=-0.014892 max=0.014280 Jy/beam ! Clean residual mean=0.000011 rms=0.003006 Jy/beam ! Combined flux in latest and established models = 1.27622 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 1.27622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085858Jy sigma=0.446545 ! Fit after self-cal, rms=0.085334Jy sigma=0.442938 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9545 x 1.064 at 5.682 degrees (North through East) ! Clean map min=-0.012888 max=1.0569 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.01 KP 1.05 ! LA 1.04 MK 1.00 OV 0.95 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.04 KP 1.04 ! LA 1.04 MK 0.98 OV 0.94 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.01 KP 1.04 ! LA 1.04 MK 0.99 OV 0.95 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.99 KP 1.04 ! LA 1.04 MK 1.02 OV 0.95 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.00 KP 1.04 ! LA 1.04 MK 1.01 OV 0.96 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.01 KP 1.04 ! LA 1.03 MK 1.01 OV 0.95 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.03 ! LA 1.05 MK 1.03 OV 0.94 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.99 KP 1.06 ! LA 1.04 MK 1.03 OV 0.95 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.03 ! LA 1.03 MK 1.03 OV 0.94 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.01 KP 1.04 ! LA 1.03 MK 1.03 OV 0.94 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.04 ! LA 1.02 MK 1.06 OV 0.95 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.02 KP 1.05 ! LA 1.01 MK 1.05 OV 0.95 PT 0.91 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.085334Jy sigma=0.442938 ! Fit after self-cal, rms=0.058488Jy sigma=0.307132 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9579 mas, bmaj=1.068 mas, bpa=6.162 degrees ! Estimated noise=0.662162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824856 Jy ! Component: 100 - total flux cleaned = 0.0117982 Jy ! Component: 150 - total flux cleaned = 0.0143281 Jy ! Component: 200 - total flux cleaned = 0.0158908 Jy ! Total flux subtracted in 200 components = 0.0158908 Jy ! Clean residual min=-0.004320 max=0.005830 Jy/beam ! Clean residual mean=0.000023 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.29211 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 1.29211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056949Jy sigma=0.299903 ! Fit after self-cal, rms=0.056864Jy sigma=0.299379 ! Inverting map ! Added new window around map position (-0.6, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520696 Jy ! Component: 100 - total flux cleaned = 0.00729366 Jy ! Component: 150 - total flux cleaned = 0.00854949 Jy ! Component: 200 - total flux cleaned = 0.009236 Jy ! Total flux subtracted in 200 components = 0.009236 Jy ! Clean residual min=-0.004157 max=0.004408 Jy/beam ! Clean residual mean=0.000020 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 1.30134 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 1.30134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056142Jy sigma=0.295836 ! Fit after self-cal, rms=0.056095Jy sigma=0.295524 ! Inverting map ! Added new window around map position (-0.6, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413426 Jy ! Component: 100 - total flux cleaned = 0.00571713 Jy ! Component: 150 - total flux cleaned = 0.00654775 Jy ! Component: 200 - total flux cleaned = 0.00718071 Jy ! Total flux subtracted in 200 components = 0.00718071 Jy ! Clean residual min=-0.004077 max=0.003502 Jy/beam ! Clean residual mean=0.000016 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 1.30852 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 132 components and 1.30852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055630Jy sigma=0.293196 ! Fit after self-cal, rms=0.055594Jy sigma=0.292959 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055594Jy sigma=0.292959 ! Fit after self-cal, rms=0.054132Jy sigma=0.284785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9578 mas, bmaj=1.067 mas, bpa=5.934 degrees ! Estimated noise=0.661407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190927 Jy ! Component: 100 - total flux cleaned = 0.00238385 Jy ! Component: 150 - total flux cleaned = 0.00272813 Jy ! Component: 200 - total flux cleaned = 0.00303804 Jy ! Total flux subtracted in 200 components = 0.00303804 Jy ! Clean residual min=-0.002340 max=0.002425 Jy/beam ! Clean residual mean=0.000006 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 1.31156 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 147 components and 1.31156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053941Jy sigma=0.283778 ! Fit after self-cal, rms=0.053935Jy sigma=0.283727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446667 Jy ! Component: 100 - total flux cleaned = 0.000733621 Jy ! Component: 150 - total flux cleaned = 0.000946118 Jy ! Component: 200 - total flux cleaned = 0.00104658 Jy ! Total flux subtracted in 200 components = 0.00104658 Jy ! Clean residual min=-0.002226 max=0.002192 Jy/beam ! Clean residual mean=0.000005 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 1.31261 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 155 components and 1.31261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053836Jy sigma=0.283211 ! Fit after self-cal, rms=0.053832Jy sigma=0.283187 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053832Jy sigma=0.283187 ! Fit after self-cal, rms=0.053796Jy sigma=0.283102 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9579 mas, bmaj=1.067 mas, bpa=5.907 degrees ! Estimated noise=0.661206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77266e-05 Jy ! Component: 100 - total flux cleaned = 0.000124523 Jy ! Component: 150 - total flux cleaned = 0.000269374 Jy ! Component: 200 - total flux cleaned = 0.000359738 Jy ! Total flux subtracted in 200 components = 0.000359738 Jy ! Clean residual min=-0.002076 max=0.002088 Jy/beam ! Clean residual mean=0.000005 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 1.31297 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 161 components and 1.31297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053714Jy sigma=0.282665 ! Fit after self-cal, rms=0.053712Jy sigma=0.282648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.77853e-05 Jy ! Component: 100 - total flux cleaned = 0.00021946 Jy ! Component: 150 - total flux cleaned = 0.000342231 Jy ! Component: 200 - total flux cleaned = 0.000418852 Jy ! Total flux subtracted in 200 components = 0.000418852 Jy ! Clean residual min=-0.001991 max=0.001951 Jy/beam ! Clean residual mean=0.000005 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 1.31339 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 166 components and 1.31339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053653Jy sigma=0.282348 ! Fit after self-cal, rms=0.053650Jy sigma=0.282333 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053650Jy sigma=0.282333 ! Fit after self-cal, rms=0.053628Jy sigma=0.282298 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=2.631 mas, bpa=61.68 degrees ! Estimated noise=0.964558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012093 Jy ! Component: 100 - total flux cleaned = 0.00180244 Jy ! Component: 150 - total flux cleaned = 0.00209285 Jy ! Component: 200 - total flux cleaned = 0.00232915 Jy ! Total flux subtracted in 200 components = 0.00232915 Jy ! Clean residual min=-0.002468 max=0.002473 Jy/beam ! Clean residual mean=0.000009 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 1.31572 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 172 components and 1.31572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053601Jy sigma=0.282188 ! Fit after self-cal, rms=0.053592Jy sigma=0.282122 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176774 Jy ! Component: 100 - total flux cleaned = 0.000402357 Jy ! Component: 150 - total flux cleaned = 0.000593978 Jy ! Component: 200 - total flux cleaned = 0.000666878 Jy ! Total flux subtracted in 200 components = 0.000666878 Jy ! Clean residual min=-0.002289 max=0.002212 Jy/beam ! Clean residual mean=0.000008 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 1.31638 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 180 components and 1.31638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053583Jy sigma=0.282102 ! Fit after self-cal, rms=0.053581Jy sigma=0.282085 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.958 mas, bmaj=1.067 mas, bpa=5.866 degrees ! Estimated noise=0.661038 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.958 x 1.067 at 5.866 degrees (North through East) ! Clean map min=-0.0016054 max=1.0539 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053581Jy sigma=0.282085 ! Fit after self-cal, rms=0.050019Jy sigma=0.257080 ! Inverting map and beam ! Estimated beam: bmin=0.9582 mas, bmaj=1.067 mas, bpa=5.988 degrees ! Estimated noise=0.660892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114187 Jy ! Component: 100 - total flux cleaned = -0.00114226 Jy ! Component: 150 - total flux cleaned = -0.00117859 Jy ! Component: 200 - total flux cleaned = -0.00121107 Jy ! Total flux subtracted in 200 components = -0.00121107 Jy ! Clean residual min=-0.001598 max=0.001705 Jy/beam ! Clean residual mean=0.000004 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 1.31517 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 195 components and 1.31517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049964Jy sigma=0.256767 ! Fit after self-cal, rms=0.049961Jy sigma=0.256752 ! Inverting map ! Added new window around map position (6.2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000985633 Jy ! Component: 100 - total flux cleaned = 0.00125941 Jy ! Component: 150 - total flux cleaned = 0.0013983 Jy ! Component: 200 - total flux cleaned = 0.00146378 Jy ! Total flux subtracted in 200 components = 0.00146378 Jy ! Clean residual min=-0.001479 max=0.001635 Jy/beam ! Clean residual mean=0.000004 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 1.31664 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 210 components and 1.31664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049897Jy sigma=0.256401 ! Fit after self-cal, rms=0.049892Jy sigma=0.256387 ! Inverting map ! Added new window around map position (10, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107136 Jy ! Component: 100 - total flux cleaned = 0.00154706 Jy ! Component: 150 - total flux cleaned = 0.00177579 Jy ! Component: 200 - total flux cleaned = 0.00192882 Jy ! Total flux subtracted in 200 components = 0.00192882 Jy ! Clean residual min=-0.001380 max=0.001477 Jy/beam ! Clean residual mean=0.000004 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 1.31857 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 220 components and 1.31857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049835Jy sigma=0.256077 ! Fit after self-cal, rms=0.049833Jy sigma=0.256069 ! Inverting map ! Added new window around map position (-1.4, 15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160384 Jy ! Component: 100 - total flux cleaned = 0.00208374 Jy ! Component: 150 - total flux cleaned = 0.00211452 Jy ! Component: 200 - total flux cleaned = 0.00220522 Jy ! Total flux subtracted in 200 components = 0.00220522 Jy ! Clean residual min=-0.001421 max=0.001341 Jy/beam ! Clean residual mean=0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 1.32077 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 235 components and 1.32077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049768Jy sigma=0.255729 ! Fit after self-cal, rms=0.049763Jy sigma=0.255713 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049763Jy sigma=0.255713 ! Fit after self-cal, rms=0.049734Jy sigma=0.255626 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7298 mas, bmaj=0.8132 mas, bpa=-0.735 degrees ! Estimated noise=1.37664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.785318 Jy ! Component: 100 - total flux cleaned = 0.976773 Jy ! Component: 150 - total flux cleaned = 1.06349 Jy ! Component: 200 - total flux cleaned = 1.11111 Jy ! Total flux subtracted in 200 components = 1.11111 Jy ! Clean residual min=-0.010415 max=0.024132 Jy/beam ! Clean residual mean=-0.000003 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 1.11111 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.11111 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9582 mas, bmaj=1.067 mas, bpa=5.963 degrees ! Estimated noise=0.660777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047835 Jy ! Component: 100 - total flux cleaned = 0.0762044 Jy ! Component: 150 - total flux cleaned = 0.0966984 Jy ! Component: 200 - total flux cleaned = 0.1125 Jy ! Total flux subtracted in 200 components = 0.1125 Jy ! Clean residual min=-0.004744 max=0.009776 Jy/beam ! Clean residual mean=0.000023 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 1.22361 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 45 components and 1.22361 Jy ! Inverting map ! Added new window around map position (0.8, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127143 Jy ! Component: 100 - total flux cleaned = 0.0230911 Jy ! Component: 150 - total flux cleaned = 0.0318078 Jy ! Component: 200 - total flux cleaned = 0.0392475 Jy ! Total flux subtracted in 200 components = 0.0392475 Jy ! Clean residual min=-0.003189 max=0.004977 Jy/beam ! Clean residual mean=0.000018 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 1.26286 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 79 components and 1.26286 Jy ! Inverting map ! Added new window around map position (-0.8, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642616 Jy ! Component: 100 - total flux cleaned = 0.011949 Jy ! Component: 150 - total flux cleaned = 0.0167726 Jy ! Component: 200 - total flux cleaned = 0.0210029 Jy ! Total flux subtracted in 200 components = 0.0210029 Jy ! Clean residual min=-0.002452 max=0.003032 Jy/beam ! Clean residual mean=0.000013 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 1.28386 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 105 components and 1.28387 Jy ! Inverting map ! Added new window around map position (-1.2, 13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378143 Jy ! Component: 100 - total flux cleaned = 0.00709677 Jy ! Component: 150 - total flux cleaned = 0.0100386 Jy ! Component: 200 - total flux cleaned = 0.0126576 Jy ! Total flux subtracted in 200 components = 0.0126576 Jy ! Clean residual min=-0.001951 max=0.002151 Jy/beam ! Clean residual mean=0.000009 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 1.29652 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 138 components and 1.29652 Jy ! Inverting map ! Added new window around map position (-2.6, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247947 Jy ! Component: 100 - total flux cleaned = 0.0046307 Jy ! Component: 150 - total flux cleaned = 0.00658233 Jy ! Component: 200 - total flux cleaned = 0.00836445 Jy ! Total flux subtracted in 200 components = 0.00836445 Jy ! Clean residual min=-0.001666 max=0.001596 Jy/beam ! Clean residual mean=0.000006 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 1.30489 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 170 components and 1.30489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=2.632 mas, bpa=61.68 degrees ! Estimated noise=0.963839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034571 Jy ! Component: 100 - total flux cleaned = 0.00602755 Jy ! Component: 150 - total flux cleaned = 0.0080355 Jy ! Component: 200 - total flux cleaned = 0.00967245 Jy ! Total flux subtracted in 200 components = 0.00967245 Jy ! Clean residual min=-0.001908 max=0.001896 Jy/beam ! Clean residual mean=0.000007 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 1.31456 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139125 Jy ! Component: 100 - total flux cleaned = 0.00259893 Jy ! Component: 150 - total flux cleaned = 0.00365264 Jy ! Component: 200 - total flux cleaned = 0.0045738 Jy ! Total flux subtracted in 200 components = 0.0045738 Jy ! Clean residual min=-0.001600 max=0.001624 Jy/beam ! Clean residual mean=0.000005 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 1.31913 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 241 components and 1.31913 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9582 mas, bmaj=1.067 mas, bpa=5.963 degrees ! Estimated noise=0.660777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000790823 Jy ! Component: 100 - total flux cleaned = 0.00107681 Jy ! Component: 150 - total flux cleaned = 0.00124265 Jy ! Component: 200 - total flux cleaned = 0.00152163 Jy ! Total flux subtracted in 200 components = 0.00152163 Jy ! Clean residual min=-0.001364 max=0.001282 Jy/beam ! Clean residual mean=0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 1.32065 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 256 components and 1.32066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049636Jy sigma=0.255190 ! Fit after self-cal, rms=0.049603Jy sigma=0.254988 wmodel J0228+6721_X_map.mod ! Writing 256 model components to file: J0228+6721_X_map.mod wobs J0228+6721_X_uvs.fits ! Writing UV FITS file: J0228+6721_X_uvs.fits wwins J0228+6721_X_map.win ! wwins: Wrote 13 windows to J0228+6721_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289572 Jy ! Component: 100 - total flux cleaned = -0.000497046 Jy ! Component: 150 - total flux cleaned = -0.000457713 Jy ! Component: 200 - total flux cleaned = -0.000496055 Jy ! Component: 250 - total flux cleaned = -0.000477295 Jy ! Component: 300 - total flux cleaned = -0.000422674 Jy ! Component: 350 - total flux cleaned = -0.000351727 Jy ! Component: 400 - total flux cleaned = -0.000282161 Jy ! Component: 450 - total flux cleaned = -0.000179975 Jy ! Component: 500 - total flux cleaned = -0.000129691 Jy ! Component: 550 - total flux cleaned = -7.98536e-05 Jy ! Component: 600 - total flux cleaned = 1.5743e-06 Jy ! Component: 650 - total flux cleaned = 4.93625e-05 Jy ! Component: 700 - total flux cleaned = 3.33652e-05 Jy ! Component: 750 - total flux cleaned = 4.89102e-05 Jy ! Component: 800 - total flux cleaned = 2.77427e-06 Jy ! Component: 850 - total flux cleaned = -2.76025e-05 Jy ! Component: 900 - total flux cleaned = 1.75746e-05 Jy ! Component: 950 - total flux cleaned = 3.05548e-06 Jy ! Component: 1000 - total flux cleaned = 1.77704e-05 Jy ! Component: 1050 - total flux cleaned = 1.76427e-05 Jy ! Component: 1100 - total flux cleaned = 1.76011e-05 Jy ! Component: 1150 - total flux cleaned = 3.18693e-05 Jy ! Component: 1200 - total flux cleaned = -2.42594e-05 Jy ! Component: 1250 - total flux cleaned = -2.41976e-05 Jy ! Component: 1300 - total flux cleaned = -3.7962e-05 Jy ! Component: 1350 - total flux cleaned = -6.5186e-05 Jy ! Component: 1400 - total flux cleaned = -0.000105756 Jy ! Component: 1450 - total flux cleaned = -0.00011926 Jy ! Component: 1500 - total flux cleaned = -0.000172276 Jy ! Component: 1550 - total flux cleaned = -0.000198387 Jy ! Component: 1600 - total flux cleaned = -0.000263066 Jy ! Component: 1650 - total flux cleaned = -0.000262942 Jy ! Component: 1700 - total flux cleaned = -0.000237374 Jy ! Component: 1750 - total flux cleaned = -0.00021194 Jy ! Component: 1800 - total flux cleaned = -0.000224741 Jy ! Component: 1850 - total flux cleaned = -0.000237151 Jy ! Component: 1900 - total flux cleaned = -0.000249526 Jy ! Component: 1950 - total flux cleaned = -0.000274011 Jy ! Component: 2000 - total flux cleaned = -0.000225102 Jy ! Component: 2050 - total flux cleaned = -0.000249228 Jy ! Component: 2100 - total flux cleaned = -0.000249065 Jy ! Component: 2150 - total flux cleaned = -0.000260926 Jy ! Component: 2200 - total flux cleaned = -0.000272699 Jy ! Component: 2250 - total flux cleaned = -0.000284511 Jy ! Component: 2300 - total flux cleaned = -0.000238006 Jy ! Component: 2350 - total flux cleaned = -0.000307493 Jy ! Component: 2400 - total flux cleaned = -0.000330447 Jy ! Component: 2450 - total flux cleaned = -0.000353196 Jy ! Component: 2500 - total flux cleaned = -0.000319256 Jy ! Component: 2550 - total flux cleaned = -0.000330507 Jy ! Component: 2600 - total flux cleaned = -0.000352773 Jy ! Component: 2650 - total flux cleaned = -0.000297427 Jy ! Component: 2700 - total flux cleaned = -0.000330549 Jy ! Component: 2750 - total flux cleaned = -0.000330494 Jy ! Component: 2800 - total flux cleaned = -0.000373894 Jy ! Component: 2850 - total flux cleaned = -0.000363158 Jy ! Component: 2900 - total flux cleaned = -0.000330988 Jy ! Component: 2950 - total flux cleaned = -0.000362922 Jy ! Component: 3000 - total flux cleaned = -0.000331113 Jy ! Component: 3050 - total flux cleaned = -0.000373336 Jy ! Component: 3100 - total flux cleaned = -0.000373235 Jy ! Component: 3150 - total flux cleaned = -0.00040441 Jy ! Component: 3200 - total flux cleaned = -0.000414646 Jy ! Component: 3250 - total flux cleaned = -0.000383933 Jy ! Component: 3300 - total flux cleaned = -0.000363576 Jy ! Component: 3350 - total flux cleaned = -0.000383893 Jy ! Component: 3400 - total flux cleaned = -0.000353762 Jy ! Component: 3450 - total flux cleaned = -0.000313739 Jy ! Component: 3500 - total flux cleaned = -0.000353521 Jy ! Component: 3550 - total flux cleaned = -0.000402803 Jy ! Component: 3600 - total flux cleaned = -0.000353786 Jy ! Component: 3650 - total flux cleaned = -0.000412404 Jy ! Component: 3700 - total flux cleaned = -0.000383203 Jy ! Component: 3750 - total flux cleaned = -0.000412202 Jy ! Component: 3800 - total flux cleaned = -0.000392949 Jy ! Component: 3850 - total flux cleaned = -0.000392927 Jy ! Component: 3900 - total flux cleaned = -0.000383476 Jy ! Component: 3950 - total flux cleaned = -0.000355213 Jy ! Component: 4000 - total flux cleaned = -0.000345798 Jy ! Component: 4050 - total flux cleaned = -0.000383011 Jy ! Total flux subtracted in 4096 components = -0.000290287 Jy ! Clean residual min=-0.000571 max=0.000602 Jy/beam ! Clean residual mean=0.000001 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 1.32036 Jy keep ! Adding 367 model components to the UV plane model. ! The established model now contains 623 components and 1.32036 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0228+6721_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9582 x 1.067 at 5.963 degrees (North through East) ! Clean map min=-0.00097226 max=1.055 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0228+6721_X_map.fits wmodel /image_prod/ug002_uva//J0228+6721_X_map.mod ! Writing 623 model components to file: /image_prod/ug002_uva//J0228+6721_X_map.mod wobs /image_prod/ug002_uva//J0228+6721_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0228+6721_X_uvs.fits wwins /image_prod/ug002_uva//J0228+6721_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0228+6721_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.05505 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155674 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0442654 0.0442654 0.0885308 0.177062 0.354123 0.708246 1.41649 2.83298 5.66597 11.3319 22.6639 45.3277 90.6555 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6777.31 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0228+6721_X_dfm.log closed on Wed Mar 4 19:34:13 2020