! Started logfile: /image_prod/ug002_uva//J0222-1615_X_dfm.log on Wed Mar  4 19:31:14 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0222-1615_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0222-1615_X_uva.fits
! AN table 1: 40 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.625 visibilities/baseline/integration-bin.
! Found source: J0222-1615
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6300 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0222-1615_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015643Jy  sigma=9.431052
! Fit after  self-cal, rms=0.865323Jy  sigma=8.041472
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7387 mas, bmaj=2.971 mas, bpa=-17.95 degrees
! Estimated noise=1.96005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0965921 Jy
! Component: 100  -  total flux cleaned = 0.124589 Jy
! Total flux subtracted in 100 components = 0.124589 Jy
! Clean residual min=-0.009384 max=0.013382 Jy/beam
! Clean residual mean=0.000004 rms=0.002578 Jy/beam
! Combined flux in latest and established models = 0.124589 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.124589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056479Jy  sigma=0.511529
! Fit after  self-cal, rms=0.056452Jy  sigma=0.511265
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9745 mas, bmaj=3.243 mas, bpa=-16.99 degrees
! Estimated noise=0.972822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197969 Jy
! Component: 100  -  total flux cleaned = 0.0288436 Jy
! Component: 150  -  total flux cleaned = 0.0337187 Jy
! Component: 200  -  total flux cleaned = 0.0360143 Jy
! Total flux subtracted in 200 components = 0.0360143 Jy
! Clean residual min=-0.007355 max=0.006487 Jy/beam
! Clean residual mean=0.000001 rms=0.001942 Jy/beam
! Combined flux in latest and established models = 0.160603 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.160603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049887Jy  sigma=0.446981
! Fit after  self-cal, rms=0.049872Jy  sigma=0.446769
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9745 x 3.243 at -16.99 degrees (North through East)
! Clean map  min=-0.007024  max=0.12725 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     KP        1.03     MK        1.01     
!   NL        1.15     OV        0.91     PT        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     KP        1.04     MK        0.98     
!   NL        1.18     OV        0.91     PT        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     KP        0.98     MK        1.06     
!   NL        1.20     OV        0.93     PT        0.97     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     KP        1.00     MK        1.01     
!   NL        1.16     OV        0.93     PT        0.97     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     KP        1.01     MK        1.01     
!   NL        1.12     OV        0.92     PT        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.11     KP        1.01     MK        1.02     
!   NL        1.20     OV        0.89     PT        0.90     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.13     KP        1.01     MK        1.07     
!   NL        1.13     OV        0.90     PT        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     KP        0.99     MK        1.07     
!   NL        1.10     OV        0.94     PT        0.95     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.08     KP        0.99     MK        1.03     
!   NL        1.20     OV        0.92     PT        0.94     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.13     KP        1.00     MK        1.06     
!   NL        1.09     OV        0.91     PT        1.03     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     KP        1.02     MK        1.10     
!   NL        1.14     OV        0.93     PT        0.93     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     KP        0.98     MK        1.17     
!   NL        1.13     OV        0.90     PT        0.96     
! 
! 
! Fit before self-cal, rms=0.049872Jy  sigma=0.446769
! Fit after  self-cal, rms=0.049096Jy  sigma=0.429306
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9973 mas, bmaj=3.241 mas, bpa=-17.16 degrees
! Estimated noise=0.990309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000769686 Jy
! Component: 100  -  total flux cleaned = -0.000878333 Jy
! Component: 150  -  total flux cleaned = -0.000878255 Jy
! Component: 200  -  total flux cleaned = -0.00085633 Jy
! Total flux subtracted in 200 components = -0.00085633 Jy
! Clean residual min=-0.004053 max=0.004071 Jy/beam
! Clean residual mean=0.000001 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.159747 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 39 components and 0.159747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049066Jy  sigma=0.429052
! Fit after  self-cal, rms=0.049105Jy  sigma=0.428876
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049105Jy  sigma=0.428876
! Fit after  self-cal, rms=0.048756Jy  sigma=0.425193
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=3.232 mas, bpa=-17.3 degrees
! Estimated noise=0.990319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000969423 Jy
! Component: 100  -  total flux cleaned = -0.000994459 Jy
! Component: 150  -  total flux cleaned = -0.00103719 Jy
! Component: 200  -  total flux cleaned = -0.00111481 Jy
! Total flux subtracted in 200 components = -0.00111481 Jy
! Clean residual min=-0.003431 max=0.003795 Jy/beam
! Clean residual mean=-0.000000 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.158632 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.158632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048725Jy  sigma=0.424878
! Fit after  self-cal, rms=0.048715Jy  sigma=0.424839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190485 Jy
! Component: 100  -  total flux cleaned = -0.000209293 Jy
! Component: 150  -  total flux cleaned = -0.000209289 Jy
! Component: 200  -  total flux cleaned = -0.000238658 Jy
! Total flux subtracted in 200 components = -0.000238658 Jy
! Clean residual min=-0.003319 max=0.003775 Jy/beam
! Clean residual mean=-0.000000 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.158394 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.158394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048705Jy  sigma=0.424725
! Fit after  self-cal, rms=0.048702Jy  sigma=0.424717
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048702Jy  sigma=0.424717
! Fit after  self-cal, rms=0.048722Jy  sigma=0.424637
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=3.23 mas, bpa=-17.36 degrees
! Estimated noise=0.990229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000624457 Jy
! Component: 100  -  total flux cleaned = -0.000623581 Jy
! Component: 150  -  total flux cleaned = -0.000669569 Jy
! Component: 200  -  total flux cleaned = -0.000698182 Jy
! Total flux subtracted in 200 components = -0.000698182 Jy
! Clean residual min=-0.003237 max=0.003778 Jy/beam
! Clean residual mean=-0.000000 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.157695 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.157695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048710Jy  sigma=0.424511
! Fit after  self-cal, rms=0.048709Jy  sigma=0.424505
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.96814e-05 Jy
! Component: 100  -  total flux cleaned = -8.04541e-05 Jy
! Component: 150  -  total flux cleaned = -9.23835e-05 Jy
! Component: 200  -  total flux cleaned = -0.000114819 Jy
! Total flux subtracted in 200 components = -0.000114819 Jy
! Clean residual min=-0.003181 max=0.003767 Jy/beam
! Clean residual mean=-0.000000 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.157581 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 0.157581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048703Jy  sigma=0.424442
! Fit after  self-cal, rms=0.048702Jy  sigma=0.424439
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048702Jy  sigma=0.424439
! Fit after  self-cal, rms=0.048719Jy  sigma=0.424404
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.486 mas, bmaj=4.505 mas, bpa=8.471 degrees
! Estimated noise=1.17045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000517889 Jy
! Component: 100  -  total flux cleaned = -0.000520222 Jy
! Component: 150  -  total flux cleaned = -0.000494893 Jy
! Component: 200  -  total flux cleaned = -0.000484014 Jy
! Total flux subtracted in 200 components = -0.000484014 Jy
! Clean residual min=-0.004467 max=0.005456 Jy/beam
! Clean residual mean=-0.000000 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 0.157097 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.157097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048715Jy  sigma=0.424334
! Fit after  self-cal, rms=0.048708Jy  sigma=0.424304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128696 Jy
! Component: 100  -  total flux cleaned = -0.000129017 Jy
! Component: 150  -  total flux cleaned = -0.000104287 Jy
! Component: 200  -  total flux cleaned = -9.27614e-05 Jy
! Total flux subtracted in 200 components = -9.27614e-05 Jy
! Clean residual min=-0.004472 max=0.005446 Jy/beam
! Clean residual mean=-0.000000 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 0.157004 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 64 components and 0.157004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048709Jy  sigma=0.424280
! Fit after  self-cal, rms=0.048705Jy  sigma=0.424259
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.228 mas, bpa=-17.39 degrees
! Estimated noise=0.990065 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 3.228 at -17.39 degrees (North through East)
! Clean map  min=-0.0031771  max=0.13043 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7579 mas, bmaj=2.937 mas, bpa=-18.66 degrees
! Estimated noise=2.06436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0999172 Jy
! Component: 100  -  total flux cleaned = 0.125827 Jy
! Component: 150  -  total flux cleaned = 0.13895 Jy
! Component: 200  -  total flux cleaned = 0.146048 Jy
! Total flux subtracted in 200 components = 0.146048 Jy
! Clean residual min=-0.004377 max=0.004072 Jy/beam
! Clean residual mean=0.000001 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.146048 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.146048 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.228 mas, bpa=-17.39 degrees
! Estimated noise=0.990065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00583476 Jy
! Component: 100  -  total flux cleaned = 0.00791953 Jy
! Component: 150  -  total flux cleaned = 0.00849874 Jy
! Component: 200  -  total flux cleaned = 0.0090044 Jy
! Total flux subtracted in 200 components = 0.0090044 Jy
! Clean residual min=-0.003386 max=0.003729 Jy/beam
! Clean residual mean=-0.000000 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.155053 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 0.155053 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.486 mas, bmaj=4.505 mas, bpa=8.471 degrees
! Estimated noise=1.17045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334459 Jy
! Component: 100  -  total flux cleaned = 0.000518393 Jy
! Component: 150  -  total flux cleaned = 0.000707199 Jy
! Component: 200  -  total flux cleaned = 0.000828917 Jy
! Total flux subtracted in 200 components = 0.000828917 Jy
! Clean residual min=-0.004351 max=0.005390 Jy/beam
! Clean residual mean=-0.000000 rms=0.001422 Jy/beam
! Combined flux in latest and established models = 0.155882 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.16275e-05 Jy
! Component: 100  -  total flux cleaned = 0.000111226 Jy
! Component: 150  -  total flux cleaned = 0.00013918 Jy
! Component: 200  -  total flux cleaned = 0.000166583 Jy
! Total flux subtracted in 200 components = 0.000166583 Jy
! Clean residual min=-0.004269 max=0.005407 Jy/beam
! Clean residual mean=-0.000000 rms=0.001414 Jy/beam
! Combined flux in latest and established models = 0.156048 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.156048 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.228 mas, bpa=-17.39 degrees
! Estimated noise=0.990065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.73099e-05 Jy
! Component: 100  -  total flux cleaned = -6.07113e-05 Jy
! Component: 150  -  total flux cleaned = -6.29735e-05 Jy
! Component: 200  -  total flux cleaned = -2.05985e-05 Jy
! Total flux subtracted in 200 components = -2.05985e-05 Jy
! Clean residual min=-0.003171 max=0.003777 Jy/beam
! Clean residual mean=-0.000000 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.156028 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.156028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048735Jy  sigma=0.424532
! Fit after  self-cal, rms=0.048728Jy  sigma=0.424507
wmodel J0222-1615_X_map.mod
! Writing 52 model components to file: J0222-1615_X_map.mod
wobs   J0222-1615_X_uvs.fits
! Writing UV FITS file: J0222-1615_X_uvs.fits
wwins  J0222-1615_X_map.win
! wwins: Wrote 1 windows to J0222-1615_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000619068 Jy
! Component: 100  -  total flux cleaned = 0.000620632 Jy
! Component: 150  -  total flux cleaned = 0.000530973 Jy
! Component: 200  -  total flux cleaned = 0.000367783 Jy
! Component: 250  -  total flux cleaned = 0.000257368 Jy
! Component: 300  -  total flux cleaned = 0.000223634 Jy
! Component: 350  -  total flux cleaned = 0.000128919 Jy
! Component: 400  -  total flux cleaned = 6.99011e-05 Jy
! Component: 450  -  total flux cleaned = -1.2687e-05 Jy
! Component: 500  -  total flux cleaned = -0.00014121 Jy
! Component: 550  -  total flux cleaned = -0.000165385 Jy
! Component: 600  -  total flux cleaned = -0.000233162 Jy
! Component: 650  -  total flux cleaned = -0.000297376 Jy
! Component: 700  -  total flux cleaned = -0.000338933 Jy
! Component: 750  -  total flux cleaned = -0.000416728 Jy
! Component: 800  -  total flux cleaned = -0.000471876 Jy
! Component: 850  -  total flux cleaned = -0.000506334 Jy
! Component: 900  -  total flux cleaned = -0.000539661 Jy
! Component: 950  -  total flux cleaned = -0.00053942 Jy
! Component: 1000  -  total flux cleaned = -0.000523986 Jy
! Component: 1050  -  total flux cleaned = -0.000538899 Jy
! Component: 1100  -  total flux cleaned = -0.000566674 Jy
! Component: 1150  -  total flux cleaned = -0.000552851 Jy
! Component: 1200  -  total flux cleaned = -0.000539733 Jy
! Component: 1250  -  total flux cleaned = -0.00055205 Jy
! Component: 1300  -  total flux cleaned = -0.00055205 Jy
! Component: 1350  -  total flux cleaned = -0.000576514 Jy
! Component: 1400  -  total flux cleaned = -0.00061201 Jy
! Component: 1450  -  total flux cleaned = -0.000634986 Jy
! Component: 1500  -  total flux cleaned = -0.00065744 Jy
! Component: 1550  -  total flux cleaned = -0.000690525 Jy
! Component: 1600  -  total flux cleaned = -0.000712122 Jy
! Component: 1650  -  total flux cleaned = -0.000733076 Jy
! Component: 1700  -  total flux cleaned = -0.000764019 Jy
! Component: 1750  -  total flux cleaned = -0.00080444 Jy
! Component: 1800  -  total flux cleaned = -0.000853805 Jy
! Component: 1850  -  total flux cleaned = -0.000863404 Jy
! Component: 1900  -  total flux cleaned = -0.000891955 Jy
! Component: 1950  -  total flux cleaned = -0.000920217 Jy
! Component: 2000  -  total flux cleaned = -0.000938652 Jy
! Component: 2050  -  total flux cleaned = -0.000965914 Jy
! Component: 2100  -  total flux cleaned = -0.000992744 Jy
! Component: 2150  -  total flux cleaned = -0.00100157 Jy
! Component: 2200  -  total flux cleaned = -0.00102769 Jy
! Component: 2250  -  total flux cleaned = -0.00103628 Jy
! Component: 2300  -  total flux cleaned = -0.00106178 Jy
! Component: 2350  -  total flux cleaned = -0.00109523 Jy
! Component: 2400  -  total flux cleaned = -0.00112006 Jy
! Component: 2450  -  total flux cleaned = -0.00112003 Jy
! Component: 2500  -  total flux cleaned = -0.0011363 Jy
! Component: 2550  -  total flux cleaned = -0.00113627 Jy
! Component: 2600  -  total flux cleaned = -0.00114431 Jy
! Component: 2650  -  total flux cleaned = -0.00114433 Jy
! Component: 2700  -  total flux cleaned = -0.00114435 Jy
! Component: 2750  -  total flux cleaned = -0.00113656 Jy
! Component: 2800  -  total flux cleaned = -0.00112116 Jy
! Component: 2850  -  total flux cleaned = -0.00109824 Jy
! Component: 2900  -  total flux cleaned = -0.00106795 Jy
! Component: 2950  -  total flux cleaned = -0.00105287 Jy
! Component: 3000  -  total flux cleaned = -0.00103787 Jy
! Component: 3050  -  total flux cleaned = -0.000993219 Jy
! Component: 3100  -  total flux cleaned = -0.000963686 Jy
! Component: 3150  -  total flux cleaned = -0.000926917 Jy
! Component: 3200  -  total flux cleaned = -0.000904995 Jy
! Component: 3250  -  total flux cleaned = -0.000883128 Jy
! Component: 3300  -  total flux cleaned = -0.000861386 Jy
! Component: 3350  -  total flux cleaned = -0.000839757 Jy
! Component: 3400  -  total flux cleaned = -0.000818208 Jy
! Component: 3450  -  total flux cleaned = -0.000782466 Jy
! Component: 3500  -  total flux cleaned = -0.000753987 Jy
! Component: 3550  -  total flux cleaned = -0.000732699 Jy
! Component: 3600  -  total flux cleaned = -0.000718556 Jy
! Component: 3650  -  total flux cleaned = -0.000683345 Jy
! Component: 3700  -  total flux cleaned = -0.0006482 Jy
! Component: 3750  -  total flux cleaned = -0.000627194 Jy
! Component: 3800  -  total flux cleaned = -0.000585246 Jy
! Component: 3850  -  total flux cleaned = -0.000550388 Jy
! Component: 3900  -  total flux cleaned = -0.000522555 Jy
! Component: 3950  -  total flux cleaned = -0.000501729 Jy
! Component: 4000  -  total flux cleaned = -0.000467082 Jy
! Component: 4050  -  total flux cleaned = -0.000446353 Jy
! Total flux subtracted in 4096 components = -0.00042562 Jy
! Clean residual min=-0.000436 max=0.000422 Jy/beam
! Clean residual mean=0.000000 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.155602 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 343 components and 0.155602 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0222-1615_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 3.228 at -17.39 degrees (North through East)
! Clean map  min=-0.00094909  max=0.1332 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0222-1615_X_map.fits
wmodel /image_prod/ug002_uva//J0222-1615_X_map.mod
! Writing 343 model components to file: /image_prod/ug002_uva//J0222-1615_X_map.mod
wobs   /image_prod/ug002_uva//J0222-1615_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0222-1615_X_uvs.fits
wwins  /image_prod/ug002_uva//J0222-1615_X_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0222-1615_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133202 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00010716 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.241348 0.241348 0.482696 0.965392 1.93078 3.86157 7.72314 15.4463 30.8926 61.7851
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1243.02 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0222-1615_X_dfm.log closed on Wed Mar  4 19:31:18 2020