! Started logfile: /image_prod/ug002_uva//J0219+0120_X_dfm.log on Wed Mar 4 19:29:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0219+0120_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0219+0120_X_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.926389 visibilities/baseline/integration-bin. ! Found source: J0219+0120 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 24012 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0219+0120_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.237707Jy sigma=7.916153 ! Fit after self-cal, rms=0.336268Jy sigma=2.186688 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6579 mas, bmaj=1.63 mas, bpa=-1.477 degrees ! Estimated noise=1.15393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.526635 Jy ! Component: 100 - total flux cleaned = 0.645746 Jy ! Total flux subtracted in 100 components = 0.645746 Jy ! Clean residual min=-0.028848 max=0.043291 Jy/beam ! Clean residual mean=0.000009 rms=0.005973 Jy/beam ! Combined flux in latest and established models = 0.645746 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.645746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184106Jy sigma=0.978089 ! Fit after self-cal, rms=0.184088Jy sigma=0.977794 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487239 Jy ! Component: 100 - total flux cleaned = 0.0758541 Jy ! Total flux subtracted in 100 components = 0.0758541 Jy ! Clean residual min=-0.028724 max=0.032836 Jy/beam ! Clean residual mean=0.000006 rms=0.005334 Jy/beam ! Combined flux in latest and established models = 0.7216 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.7216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161715Jy sigma=0.856776 ! Fit after self-cal, rms=0.161633Jy sigma=0.856190 ! Inverting map ! Added new window around map position (1.2, 9.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189942 Jy ! Component: 100 - total flux cleaned = 0.0278782 Jy ! Total flux subtracted in 100 components = 0.0278782 Jy ! Clean residual min=-0.028579 max=0.032128 Jy/beam ! Clean residual mean=0.000006 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 0.749478 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.749478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156211Jy sigma=0.827911 ! Fit after self-cal, rms=0.155912Jy sigma=0.825150 ! Inverting map ! Added new window around map position (-1.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312877 Jy ! Component: 100 - total flux cleaned = 0.049465 Jy ! Total flux subtracted in 100 components = 0.049465 Jy ! Clean residual min=-0.026135 max=0.025926 Jy/beam ! Clean residual mean=0.000005 rms=0.004716 Jy/beam ! Combined flux in latest and established models = 0.798943 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.798943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147562Jy sigma=0.772428 ! Fit after self-cal, rms=0.147110Jy sigma=0.769523 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.813 mas, bmaj=1.881 mas, bpa=-1.092 degrees ! Estimated noise=0.729862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157988 Jy ! Component: 100 - total flux cleaned = 0.0196144 Jy ! Component: 150 - total flux cleaned = 0.0209158 Jy ! Component: 200 - total flux cleaned = 0.0226537 Jy ! Total flux subtracted in 200 components = 0.0226537 Jy ! Clean residual min=-0.024570 max=0.021989 Jy/beam ! Clean residual mean=0.000006 rms=0.005053 Jy/beam ! Combined flux in latest and established models = 0.821596 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.821596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141887Jy sigma=0.748868 ! Fit after self-cal, rms=0.141622Jy sigma=0.746663 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.813 x 1.881 at -1.092 degrees (North through East) ! Clean map min=-0.02293 max=0.69217 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.88 KP 1.03 ! LA 0.96 MK 1.02 NL 1.11 OV 1.01 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.88 KP 1.02 ! LA 0.96 MK 1.03 NL 1.11 OV 1.01 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.89 KP 1.03 ! LA 0.98 MK 1.02 NL 1.12 OV 1.00 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.89 KP 1.04 ! LA 0.97 MK 1.03 NL 1.11 OV 1.00 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.90 KP 1.03 ! LA 0.97 MK 1.04 NL 1.12 OV 1.00 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.90 KP 1.03 ! LA 0.98 MK 1.04 NL 1.12 OV 1.00 ! SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.90 KP 1.03 ! LA 0.97 MK 1.03 NL 1.12 OV 1.01 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.88 KP 1.03 ! LA 0.97 MK 1.03 NL 1.11 OV 1.01 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.87 KP 1.02 ! LA 0.97 MK 1.02 NL 1.12 OV 1.00 ! SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.89 KP 1.02 ! LA 0.97 MK 1.05 NL 1.12 OV 1.00 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.89 KP 1.02 ! LA 0.97 MK 1.03 NL 1.13 OV 1.01 ! SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.89 KP 1.03 ! LA 0.98 MK 1.08 NL 1.11 OV 1.02 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.141622Jy sigma=0.746663 ! Fit after self-cal, rms=0.121809Jy sigma=0.658415 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.818 mas, bmaj=1.888 mas, bpa=-1.154 degrees ! Estimated noise=0.732744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164444 Jy ! Component: 100 - total flux cleaned = 0.0196945 Jy ! Component: 150 - total flux cleaned = 0.0217872 Jy ! Component: 200 - total flux cleaned = 0.0224599 Jy ! Total flux subtracted in 200 components = 0.0224599 Jy ! Clean residual min=-0.020862 max=0.017751 Jy/beam ! Clean residual mean=0.000002 rms=0.003893 Jy/beam ! Combined flux in latest and established models = 0.844056 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 0.844056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116080Jy sigma=0.624205 ! Fit after self-cal, rms=0.115672Jy sigma=0.620566 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115672Jy sigma=0.620566 ! Fit after self-cal, rms=0.076720Jy sigma=0.452509 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8188 mas, bmaj=1.885 mas, bpa=-1.157 degrees ! Estimated noise=0.733665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724212 Jy ! Component: 100 - total flux cleaned = 0.00651008 Jy ! Component: 150 - total flux cleaned = 0.00619315 Jy ! Component: 200 - total flux cleaned = 0.00568294 Jy ! Total flux subtracted in 200 components = 0.00568294 Jy ! Clean residual min=-0.007542 max=0.006848 Jy/beam ! Clean residual mean=-0.000000 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.849739 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.849739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073828Jy sigma=0.434821 ! Fit after self-cal, rms=0.073632Jy sigma=0.433786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036033 Jy ! Component: 100 - total flux cleaned = -0.000571189 Jy ! Component: 150 - total flux cleaned = -0.000217445 Jy ! Component: 200 - total flux cleaned = 8.68377e-05 Jy ! Total flux subtracted in 200 components = 8.68377e-05 Jy ! Clean residual min=-0.007470 max=0.005823 Jy/beam ! Clean residual mean=-0.000000 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.849826 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.849826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072707Jy sigma=0.427878 ! Fit after self-cal, rms=0.072621Jy sigma=0.427540 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072621Jy sigma=0.427540 ! Fit after self-cal, rms=0.072259Jy sigma=0.423780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8184 mas, bmaj=1.883 mas, bpa=-1.199 degrees ! Estimated noise=0.734147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238021 Jy ! Component: 100 - total flux cleaned = 0.00236202 Jy ! Component: 150 - total flux cleaned = 0.00186563 Jy ! Component: 200 - total flux cleaned = 0.00142904 Jy ! Total flux subtracted in 200 components = 0.00142904 Jy ! Clean residual min=-0.006306 max=0.005135 Jy/beam ! Clean residual mean=-0.000000 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.851255 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.851255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071270Jy sigma=0.417707 ! Fit after self-cal, rms=0.071181Jy sigma=0.417293 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000716931 Jy ! Component: 100 - total flux cleaned = -0.00100054 Jy ! Component: 150 - total flux cleaned = -0.000879784 Jy ! Component: 200 - total flux cleaned = -0.000881032 Jy ! Total flux subtracted in 200 components = -0.000881032 Jy ! Clean residual min=-0.006634 max=0.004652 Jy/beam ! Clean residual mean=-0.000000 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.850374 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.850374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070740Jy sigma=0.414482 ! Fit after self-cal, rms=0.070689Jy sigma=0.414270 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070689Jy sigma=0.414270 ! Fit after self-cal, rms=0.070687Jy sigma=0.413125 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.958 mas, bmaj=2.973 mas, bpa=2.776 degrees ! Estimated noise=0.99119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.77213e-05 Jy ! Component: 100 - total flux cleaned = -0.000896895 Jy ! Component: 150 - total flux cleaned = -0.000796422 Jy ! Component: 200 - total flux cleaned = -0.000805411 Jy ! Total flux subtracted in 200 components = -0.000805411 Jy ! Clean residual min=-0.006443 max=0.004825 Jy/beam ! Clean residual mean=0.000000 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.849569 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.849569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070445Jy sigma=0.411359 ! Fit after self-cal, rms=0.070390Jy sigma=0.411060 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248639 Jy ! Component: 100 - total flux cleaned = -0.000764166 Jy ! Component: 150 - total flux cleaned = -0.000550459 Jy ! Component: 200 - total flux cleaned = -0.000421882 Jy ! Total flux subtracted in 200 components = -0.000421882 Jy ! Clean residual min=-0.005945 max=0.004771 Jy/beam ! Clean residual mean=-0.000000 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.849147 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 121 components and 0.849147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070298Jy sigma=0.410356 ! Fit after self-cal, rms=0.070266Jy sigma=0.410210 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8182 mas, bmaj=1.882 mas, bpa=-1.21 degrees ! Estimated noise=0.734213 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8182 x 1.882 at -1.21 degrees (North through East) ! Clean map min=-0.0056429 max=0.68781 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070266Jy sigma=0.410210 ! Fit after self-cal, rms=0.066199Jy sigma=0.378798 ! Inverting map and beam ! Estimated beam: bmin=0.8184 mas, bmaj=1.883 mas, bpa=-1.233 degrees ! Estimated noise=0.73411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803893 Jy ! Component: 100 - total flux cleaned = 0.000926125 Jy ! Component: 150 - total flux cleaned = 0.00124503 Jy ! Component: 200 - total flux cleaned = 0.00143595 Jy ! Total flux subtracted in 200 components = 0.00143595 Jy ! Clean residual min=-0.005727 max=0.003897 Jy/beam ! Clean residual mean=-0.000000 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.850583 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 126 components and 0.850583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065795Jy sigma=0.376421 ! Fit after self-cal, rms=0.065750Jy sigma=0.376206 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237643 Jy ! Component: 100 - total flux cleaned = -0.000606376 Jy ! Component: 150 - total flux cleaned = -0.000688702 Jy ! Component: 200 - total flux cleaned = -0.000687658 Jy ! Total flux subtracted in 200 components = -0.000687658 Jy ! Clean residual min=-0.005651 max=0.003690 Jy/beam ! Clean residual mean=-0.000000 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.849895 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.849895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065519Jy sigma=0.374758 ! Fit after self-cal, rms=0.065486Jy sigma=0.374605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065486Jy sigma=0.374605 ! Fit after self-cal, rms=0.065450Jy sigma=0.374280 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6597 mas, bmaj=1.631 mas, bpa=-1.875 degrees ! Estimated noise=1.15531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.526865 Jy ! Component: 100 - total flux cleaned = 0.648734 Jy ! Component: 150 - total flux cleaned = 0.705246 Jy ! Component: 200 - total flux cleaned = 0.740717 Jy ! Total flux subtracted in 200 components = 0.740717 Jy ! Clean residual min=-0.011293 max=0.019328 Jy/beam ! Clean residual mean=0.000003 rms=0.002018 Jy/beam ! Combined flux in latest and established models = 0.740717 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.740717 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8181 mas, bmaj=1.882 mas, bpa=-1.231 degrees ! Estimated noise=0.733447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350007 Jy ! Component: 100 - total flux cleaned = 0.0551477 Jy ! Component: 150 - total flux cleaned = 0.0677609 Jy ! Component: 200 - total flux cleaned = 0.0763023 Jy ! Total flux subtracted in 200 components = 0.0763023 Jy ! Clean residual min=-0.004578 max=0.005072 Jy/beam ! Clean residual mean=0.000001 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.817019 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 38 components and 0.81702 Jy ! Inverting map ! Added new window around map position (-0.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638818 Jy ! Component: 100 - total flux cleaned = 0.0103797 Jy ! Component: 150 - total flux cleaned = 0.0136822 Jy ! Component: 200 - total flux cleaned = 0.0165311 Jy ! Total flux subtracted in 200 components = 0.0165311 Jy ! Clean residual min=-0.003528 max=0.004052 Jy/beam ! Clean residual mean=0.000000 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.833551 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 56 components and 0.833551 Jy ! Inverting map ! Added new window around map position (-6.8, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331741 Jy ! Component: 100 - total flux cleaned = 0.00509966 Jy ! Component: 150 - total flux cleaned = 0.00660456 Jy ! Component: 200 - total flux cleaned = 0.0078809 Jy ! Total flux subtracted in 200 components = 0.0078809 Jy ! Clean residual min=-0.003099 max=0.003216 Jy/beam ! Clean residual mean=0.000000 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.841431 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 80 components and 0.841431 Jy ! Inverting map ! Added new window around map position (-12.4, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421816 Jy ! Component: 100 - total flux cleaned = 0.00136572 Jy ! Component: 150 - total flux cleaned = 0.00230342 Jy ! Component: 200 - total flux cleaned = 0.00309019 Jy ! Total flux subtracted in 200 components = 0.00309019 Jy ! Clean residual min=-0.002896 max=0.003004 Jy/beam ! Clean residual mean=0.000001 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.844522 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 96 components and 0.844522 Jy ! Inverting map ! Added new window around map position (-2.8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026417 Jy ! Component: 100 - total flux cleaned = 0.00409857 Jy ! Component: 150 - total flux cleaned = 0.00519203 Jy ! Component: 200 - total flux cleaned = 0.00613593 Jy ! Total flux subtracted in 200 components = 0.00613593 Jy ! Clean residual min=-0.002760 max=0.002800 Jy/beam ! Clean residual mean=0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.850658 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 118 components and 0.850658 Jy ! Inverting map ! Added new window around map position (-15.8, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164818 Jy ! Component: 100 - total flux cleaned = 0.00289988 Jy ! Component: 150 - total flux cleaned = 0.0035663 Jy ! Component: 200 - total flux cleaned = 0.00396683 Jy ! Total flux subtracted in 200 components = 0.00396683 Jy ! Clean residual min=-0.002583 max=0.002266 Jy/beam ! Clean residual mean=0.000000 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.854625 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 133 components and 0.854625 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.959 mas, bmaj=2.97 mas, bpa=2.879 degrees ! Estimated noise=0.990382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217096 Jy ! Component: 100 - total flux cleaned = 0.00284411 Jy ! Component: 150 - total flux cleaned = 0.00338022 Jy ! Component: 200 - total flux cleaned = 0.00356368 Jy ! Total flux subtracted in 200 components = 0.00356368 Jy ! Clean residual min=-0.002930 max=0.002789 Jy/beam ! Clean residual mean=0.000001 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.858188 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113779 Jy ! Component: 100 - total flux cleaned = 0.000324065 Jy ! Component: 150 - total flux cleaned = 0.00046971 Jy ! Component: 200 - total flux cleaned = 0.000608312 Jy ! Total flux subtracted in 200 components = 0.000608312 Jy ! Clean residual min=-0.002782 max=0.002692 Jy/beam ! Clean residual mean=0.000001 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.858797 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 164 components and 0.858796 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8181 mas, bmaj=1.882 mas, bpa=-1.231 degrees ! Estimated noise=0.733447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000682257 Jy ! Component: 100 - total flux cleaned = 0.000899911 Jy ! Component: 150 - total flux cleaned = 0.00099618 Jy ! Component: 200 - total flux cleaned = 0.0010857 Jy ! Total flux subtracted in 200 components = 0.0010857 Jy ! Clean residual min=-0.002417 max=0.002123 Jy/beam ! Clean residual mean=0.000000 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.859882 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 184 components and 0.859882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064120Jy sigma=0.366276 ! Fit after self-cal, rms=0.063965Jy sigma=0.365263 wmodel J0219+0120_X_map.mod ! Writing 184 model components to file: J0219+0120_X_map.mod wobs J0219+0120_X_uvs.fits ! Writing UV FITS file: J0219+0120_X_uvs.fits wwins J0219+0120_X_map.win ! wwins: Wrote 9 windows to J0219+0120_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000761066 Jy ! Component: 100 - total flux cleaned = -0.00116813 Jy ! Component: 150 - total flux cleaned = -0.0013419 Jy ! Component: 200 - total flux cleaned = -0.00137596 Jy ! Component: 250 - total flux cleaned = -0.00140866 Jy ! Component: 300 - total flux cleaned = -0.00140874 Jy ! Component: 350 - total flux cleaned = -0.00140932 Jy ! Component: 400 - total flux cleaned = -0.00140907 Jy ! Component: 450 - total flux cleaned = -0.00138 Jy ! Component: 500 - total flux cleaned = -0.00143662 Jy ! Component: 550 - total flux cleaned = -0.00149242 Jy ! Component: 600 - total flux cleaned = -0.0014919 Jy ! Component: 650 - total flux cleaned = -0.00154512 Jy ! Component: 700 - total flux cleaned = -0.00151872 Jy ! Component: 750 - total flux cleaned = -0.00146729 Jy ! Component: 800 - total flux cleaned = -0.00154361 Jy ! Component: 850 - total flux cleaned = -0.0014934 Jy ! Component: 900 - total flux cleaned = -0.00151783 Jy ! Component: 950 - total flux cleaned = -0.00154117 Jy ! Component: 1000 - total flux cleaned = -0.00146956 Jy ! Component: 1050 - total flux cleaned = -0.00149285 Jy ! Component: 1100 - total flux cleaned = -0.00140111 Jy ! Component: 1150 - total flux cleaned = -0.001424 Jy ! Component: 1200 - total flux cleaned = -0.00146867 Jy ! Component: 1250 - total flux cleaned = -0.00144641 Jy ! Component: 1300 - total flux cleaned = -0.00149021 Jy ! Component: 1350 - total flux cleaned = -0.00142548 Jy ! Component: 1400 - total flux cleaned = -0.00142569 Jy ! Component: 1450 - total flux cleaned = -0.00142573 Jy ! Component: 1500 - total flux cleaned = -0.00138409 Jy ! Component: 1550 - total flux cleaned = -0.00128193 Jy ! Component: 1600 - total flux cleaned = -0.00134286 Jy ! Component: 1650 - total flux cleaned = -0.00128323 Jy ! Component: 1700 - total flux cleaned = -0.00126385 Jy ! Component: 1750 - total flux cleaned = -0.00122516 Jy ! Component: 1800 - total flux cleaned = -0.00116744 Jy ! Component: 1850 - total flux cleaned = -0.00114815 Jy ! Component: 1900 - total flux cleaned = -0.00112906 Jy ! Component: 1950 - total flux cleaned = -0.0010915 Jy ! Component: 2000 - total flux cleaned = -0.000962268 Jy ! Component: 2050 - total flux cleaned = -0.000980672 Jy ! Component: 2100 - total flux cleaned = -0.000836228 Jy ! Component: 2150 - total flux cleaned = -0.000782731 Jy ! Component: 2200 - total flux cleaned = -0.000676729 Jy ! Component: 2250 - total flux cleaned = -0.00065929 Jy ! Component: 2300 - total flux cleaned = -0.000554883 Jy ! Component: 2350 - total flux cleaned = -0.000452073 Jy ! Component: 2400 - total flux cleaned = -0.000367006 Jy ! Component: 2450 - total flux cleaned = -0.000299665 Jy ! Component: 2500 - total flux cleaned = -0.000182686 Jy ! Component: 2550 - total flux cleaned = -0.00011634 Jy ! Component: 2600 - total flux cleaned = 4.76448e-05 Jy ! Component: 2650 - total flux cleaned = 4.77666e-05 Jy ! Component: 2700 - total flux cleaned = 0.000127956 Jy ! Component: 2750 - total flux cleaned = 0.000208043 Jy ! Component: 2800 - total flux cleaned = 0.000271137 Jy ! Component: 2850 - total flux cleaned = 0.000318173 Jy ! Component: 2900 - total flux cleaned = 0.000395806 Jy ! Component: 2950 - total flux cleaned = 0.000364889 Jy ! Component: 3000 - total flux cleaned = 0.000471794 Jy ! Component: 3050 - total flux cleaned = 0.000502165 Jy ! Component: 3100 - total flux cleaned = 0.000517068 Jy ! Component: 3150 - total flux cleaned = 0.000576638 Jy ! Component: 3200 - total flux cleaned = 0.0006802 Jy ! Component: 3250 - total flux cleaned = 0.000724063 Jy ! Component: 3300 - total flux cleaned = 0.000767658 Jy ! Component: 3350 - total flux cleaned = 0.000796367 Jy ! Component: 3400 - total flux cleaned = 0.000868174 Jy ! Component: 3450 - total flux cleaned = 0.000910819 Jy ! Component: 3500 - total flux cleaned = 0.00093925 Jy ! Component: 3550 - total flux cleaned = 0.00100913 Jy ! Component: 3600 - total flux cleaned = 0.0010648 Jy ! Component: 3650 - total flux cleaned = 0.00116113 Jy ! Component: 3700 - total flux cleaned = 0.00122947 Jy ! Component: 3750 - total flux cleaned = 0.00131085 Jy ! Component: 3800 - total flux cleaned = 0.00135119 Jy ! Component: 3850 - total flux cleaned = 0.00140466 Jy ! Component: 3900 - total flux cleaned = 0.00143124 Jy ! Component: 3950 - total flux cleaned = 0.00143138 Jy ! Component: 4000 - total flux cleaned = 0.00160132 Jy ! Component: 4050 - total flux cleaned = 0.00165314 Jy ! Total flux subtracted in 4096 components = 0.00170457 Jy ! Clean residual min=-0.000689 max=0.000642 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.861587 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 511 components and 0.861586 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0219+0120_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8181 x 1.882 at -1.231 degrees (North through East) ! Clean map min=-0.0028729 max=0.6896 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0219+0120_X_map.fits wmodel /image_prod/ug002_uva//J0219+0120_X_map.mod ! Writing 511 model components to file: /image_prod/ug002_uva//J0219+0120_X_map.mod wobs /image_prod/ug002_uva//J0219+0120_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0219+0120_X_uvs.fits wwins /image_prod/ug002_uva//J0219+0120_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0219+0120_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.689604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225674 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0981755 0.0981755 0.196351 0.392702 0.785404 1.57081 3.14162 6.28323 12.5665 25.1329 50.2658 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.689 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3055.75 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0219+0120_X_dfm.log closed on Wed Mar 4 19:29:37 2020